Index STANDARD 84 210 Thumbwheel Standard Panel Mount Page 5 84 211 Rocker Standard Panel Mount Page 6 84 212 Rocker Large Panel Mount Page 7 STANDARD 84 213 Rocker Standard Rear Mount Page 8 MINIATURE 84 214 Rocker Miniature Panel Mount Page 9 MINIATURE 84 218 Rocker Miniature Rear Mount Page 10 MINIATURE Push Button Miniature Panel Mount Page 12 SUBMINIATURE 84 231 Push Button Subminiature Panel Mount Page 13 84 235 Thumbwheel PCB Flat Mount Page 14 1 Basic Module: Enable data input in coded form. 2 - End Caps: Snap into place to complete module assembly. Complete with 4 panel clips. 3 Separator: Used to fit 2 switch assemblies into one unit. They come with 2 clips. 4 - Spacer: Blank module used to replace a module assembly. 5 Encoded Dummy Module: Enables simultaneous switching to two circuits from one digital switch, it is driven by the adjacent module via a coupling shaft. 6 End Caps: For rear mounting of module assembly. They come in pairs. Other Index items Page General Information .........-- db ede e denen eee eee etn e nett teen beeen enn eta nes 3 Truth Tables o.oo ccc ccc ccc een ee een ee eee nee Et nee n nents 11 & 15 How To Order (Switches) .... 20.0.0 e ete eee eee teen nen rennet e es 16 LED. Readout ..... ccc c cece reer nnn e eee tener es 17-22 How To Order (L.E.D. Readouts) .. 0.00... eee eects eee 23dt General Information 4 4, A (ol Digital Switches Wheel Marking e Large size figures or symbols give maximum readability. @ Complies with European Aeronautics standard BN A NF L 70130. @ Special markings are available on request. Assembly Series: 84210, 84211, 84212, 84213, 84214, 84218 @ Modules snap into place easily disassembled No mounting hardware needed Assembly Dismantling Assembly Series: 84230, 84231, 84235 @ Snap fit - No tools, no hardware Clip Mounting Series 84210, 48211, 84212, 84213, 84214, 84218 Two clip assembly combination available: Panel thickness .06 - .14 in. (1.5 - 3.5mm) Panel thickness 126 - .24 in. (3.2 - 6mm). Clips supplied in pairs with end plates or spacers. - PANEL THICKNESS 06 TO 14 (1.5 103.5) PANEL THICKNESS ~ .126 TO .24 (3.2 10 6) Dimensions in inches (mm) Series 84230, 84231, 84235 No clip mounting necessary Clips molded in end caps Colors @ Standard modules come in black (grey upon request) Standard wheels are black or red with white markings. Optional wheels: (except series 84230, 84231, 84235) Green or blue with white markings. Yellow with black markings Dial Stops @ Limit the rotation of the dial to any number of positions, to be specified when ordering. Circuit Boards ; All our digital switches are provided with printed circuit boards made of glass-filled PC. 75 epoxy composite board, .03 in. (.08 mm) thick, covered with copper plated with nickel and gold. Two types of circuit boards are available: Short for direct connection or long for component mounting such as resistors or diodes, in series or parallel. (See photos). e Note 84231 MO1 and MO3: no long circuit board and no hole on circuit available.EMIT digital switches Switch Terminations and Connectors Terminals @ Three types of terminations: Direct soldering or plug-in for connectors (S) Pins for wire wrapping (X2) Except Series 84230, 84231, 84235 Pins for PC. board soldering (X3). Connectors (for Series 84210, 84211, 84212, 84213) Connectors available: Solder terminals (W2) Wire wrap terminals (X2) P.C. board solder terminals (X3). r 16 ) | 20 16 rT | 30 30 7 yw | We if ir (4) Xe 1 las! alt X3 Wt zs) (32) i- bewcn enn rsa ees * mn bawnnsa naan (5.8) |L~------------- 4 SD =| Sse . Cae epee eng y Ms bas | Errritrin f ; (0.5) 13.2 ! (0.5) 4 SQUARE 024 x 924 | (0.5) | pla. 69 (0.6 x 0.5) (17.5) | SQUARE 024 x .024 (0.6 x 0.6) wT I 177 1.30 . . ___. +] (43) (48) (33) Dimensions in inches (mm)Ey Crouzet} Digital Switches ~ Thumbwheel - standard - panel mount Series 84 210 @ Large numerals .18 in. (4.5 mm) high All modules easily assembled without hardware @ Black or red wheels standardother colors on request @ Right-sided circuits left-sided optional @ Modules will accommodate our L.E.D. readouts Operating Voltage: .1 to 250 V AC 1 to 50 V DC Nominal Electrical Load (Resistive Load): .1 mA to 100 mA Maximum Non-Switching Load: 1 A Contact Resistance: 70 m(:max. Life at 50 V DC, .1 A, Resistive Load: 1 million operations Note: For voltages and currents less than the above values, please consult us. Mechanical & Electrical Specifications Dielectric Strength: 600 V Operating Temperatures: 13 F. to 158 F, (25 C. to 70 C.) Storage Temperatures: 40 F. to 185 F. (40 C. to 85 C.) Materials Case: Nory} Wheel: Delrin Contacts and Tracks: CopperNickel Gold Brush: Seryllium bronze Dial Character Dimensions: .19 in. x .11 in. {4.5 mm x 2.8 mm) Operating Torque: 10 oz. ( 300 g) Printed Circuit Board: Glass-filled epoxy (P.C. 75) Option: The P.C. boards of the standard 84 210 type modules are mounted on the right side of the module. The decimal and BCD codes can, optionally, be mounted onto the left side of the module. In this case the Outputs are as shown below. Please contact us. Standard: Decimal M 09 BCD M10 Dimensions in inches (mm) (nx 31) + 43 1.20 (30.5) snort goaro at | | gg (2) ({n x 8) + It} PANEL THICKNESS 06 TO .14 (1.5 T0 3.5} 1.30 (33) PANEL THICKNESS 1970.24 (3.2 0 6} LONG BOARD 13 os 18.5) 18 (48) as zt) 2a | xX) y@ Ti PANEL CUTOUT 1.22 ++ a (a ss| y n tt 2 (nx 3+ 3 a 81 {(n x 8) + 9} (13) (20.5) Series 84 2\ Ma Crouzet} Digital Switches : Rocker Switch - standard - panel mount Series 84 211 @ Fast switching in both directions @ Large numerals .18 in. (4.5 mm) high @ All modules easily assembled without hardware @ Good lookingeasy to read @ Black or red wheels standard - other colors on request Mechanical & Electrical Specifications Materials Operating Voltage: .1 to 250 V AC Dielectric Strength: 600 V Case: Nory| .1to50V DC Operating Temperatures: 13 F. to 158 Wheel: Delrin Nominal Electrical Load (Resistive Load: F. (25 C. to 70 C.) Rocker Actuator: Makrolon .1mA to 100 mA Storage Temperature: 40 F. to 185 F. (Polycarbonate) Maximum Non-Switching Load: 1A (40 CG. to 85 C.) Contracts and Tracks: CopperNickel Contact Resistance: 70 m{tmax. Dial Character Dimensions: .18 in. x.11 in. Goid Life at 50 V DC, .1 A, Resistive Load: 1 (4.5 mm x w.8 mm) Brush: Beryllium bronze million operations Operating Force at End of Rocker: 17 02. Printed Circult Board: Glass-filled epoxy Note: For voltages and currents less than (500 g) (P.C. 75) the above values, please consult us. "Special elements not used in other manufacturers products. Dimensions in inches (mm) 3? (a x 39) + 51 SHORT 8OAADC 31 1.42 | ($3 ((n x 10) + 13} 25 1 (6.4) PANEL THICKNESS 06 10.14 | (1.5 10.3.5) PANEL THICKNESS 1310 24 (2.2 T0 6.1) LONG BOARD t 22 (2.7) (5.5) & oe .20 a= 2S) Te) ) x x . oc 39 ++ (10) PANEL CUTOUI Noe (31) ~~ Hol (ax 4p + 49 0.81 ({@ x 10) + 11) {13) (20.5) Series 84 21ESTES digital Switches Rocker Switch - large - panel mount Series 84 212 @ Fast switching with large rocker actuator @ Extra large numerals .24 in. (6 mm) high for easy reading @ All modules easily assembled without hardware e Attractive Mechanical & Electrical Specifications Operating Voltage: .1 to 250 V AC 1te 50 V DC Nominal Electrical Load (Resistive Load): .1mA to 100 mA Maximum Non-Switching Load: 1 A Contact Resistance: 70 m{: max. Life at 50 V DC, .1A, Resistive Load: 1 million operations Note: For voltages and currents less than the above values, please consult us. Dielectric Strength: 600 V Operating Temperatures: 13 F, to 158 F. (25 C. to 70 C.) Storage Temperatures: 40 F. to 185 F. {(40 C. to 85 C.) Dial Character Dimensions: .24 in. x .15in. (6 mm x 3.75 mm) Operating Force at End of Rocker: 10 oz. (300 g) Materials Case: Noryl Wheel: Delrin Rocker Actuator: Makrolon* (Polycarbonate) Contacts and Tracks: CopperNickel Gold Brush: Beryllium bronze Printed Circult Board: Glass-filled epoxy (P.C. 75) "Special elements not manufacturers products. used in other (nx 49) + 69 Dimensions in inches (mm) {{n x 125) + 17.5) 5? (14.5) 18 (4.5) PANEL THICKNESS vi SS SS SSS STS 4 06 TO 14 (1.5 TO 3.5} PANEL THICKNESS LONG BCAAD L 74 19TO 24 39 (18.5) (3.2706) - {7 25) _ q ; 213 or ' (34) 43 2 u FZ 5) ene , (8) #s ys 4 x x ~ vv v ] PANEL CUTOUT = =| 49 + +1112 5) CT es} t L TT wu vy iL 4 | (nx 49} + 58 51 at Ld ((n x 125) + 14.5) 3) (20 ) Series 84 212/Crouzet} Digital Switches : Rocker Switch - standard - rear mount Series 84 213 @ Fast switching in both directions @ Large numerals .18 in. (4.5 mm) high @ All modules easily assembled without hardware @ Good lookingeasy to read @ Black or red wheels in stock other colors on request Mechanical & Electrical Specifications Materials Operating Voltage: .1 to 250 V AC Dielectric Strength: 600 V Case: Noryl to 50 V DC Operating Temperatures: 13 F. to 158 Wheel: Deirin Nominal Electrical Load (Resistive Load): F. (~-25 C. to 70 C.) Rocker Actuator: Makrolon 1 mA to 100 mA Storage Temperatures: 40 F. to 185 F. (Polycarbonate) Maximum Non-Switching Load: 1A (40 C. to 85 C.) Contacts and Tracks: CopperNickel Contact Resistance: 70 mi. max. Dial Character Dimensions: .19 in. x.11 in. Gold Life at 50 V DC, .1 A, Resistive Load: 1 (4.5 mm x 2.8 mm) Brush: Beryllium bronze million operations Operating Force at End of Rocker: 17 oz. Printed Circuit Board: Glass-filled epoxy Note: For voltages and currents less than (500 g) (P.C. 75) the above values, please consult us. "Special elements not used in other manufacturers products. Dimensions in inches (mm) (nx 19) +19 t wos om 1 739 sont (nx 1D) + 5) / DIA.(2.5 +100} = goaAD =a 107 3 hein) -0 + (8) (27.1) (78) . Le - & t ja00 doo a 1900 G00 bh 1900 d00 > i laaodeo / 13 12 aooqoea fo 49 439 1 900Q00 -0 (33) (30.5) ass [Po > jooe doo (20.4 +100, 1 4000 00 -0 LL eon Feo Be , re & Lo 0 Aoo | ; (nm x 39) + 69 ! (In x 1G) + 1;> LONG BOARD L B 18 2 pe (n x 39} + 9) (18.5) (45) ($1) ((n x 10) + 23) 23 (5.8) (a x 39) + 63 f i a {[a x 10) + 16) i 3 t 2s 39 Ha a 2 13) $ r x x go a =F hag Y 24 12 2 + |) Q 16) 1 PANEL CUTOUT a (25) + > mos YT | ! [ (n x 39) +.2 31 8 fin x 10) + 5.2) (13) (20 5) HOLES FOR SCREWS O14. 1 9A 12 PANEL THICKNESS 04 TQ 23 (102 70 $.8) OIA {25 0A 3} fNote: Mounting by screws and nuts .09 in. (2.5 mm) dia. or self-tapping screws .11 in. (3 mm) dia. Series 84 212|Crouzet Digital Switches _- Truth Tables - Series 84 210 - 84 211 - 84 212 - 84 213 - 84 214 - 84 218 ON MMewn wo nN 12 This photograph shows the numbering of each terminal for location purposes only. The dots indicate the inter-connected tracks for each of the dial settings. Decimal = MO1TM13~M14 {see note) B.C.D.M02 B.C.D. + CamplementM03 Cy oO} t}2/3)4/5;) 6) 7) 8] 9 Ci1;2!tales Cy iy 2} 4; ala, 3: 4) a Location on Location on Location on PC Roard 12),11,10) 919!/7) 6) 6) 4] 3] 2 PC Board 918171615 PC Board 7} 6; 5/4) 3/41) 10) 94) 9 0 e 0 e 0 . elelele 1 1 e,@ 1 ele elele 2 2 |e 2 | @ . ele g 3 g 3 erele 2 3 @,;ele eje f= 4 E 4 [|e e| = 4 |e e ele a wa wa 3 5 a 5 e,e e = 5 e,e e e 6 6 e)e 6 e ei.e e e } 7 @;e@/e;e 7 @\ ele ,e e 3 8 * 8 je elelele 9 9 6;e | * 9 ele e ele 2 Position RepeatingM04 B.C.D. ComplamentM07 B.C.0. EXCESS 6 + ComplamentMO8 Hexadecimal 5.C.D. - M 29 Type Type i]atal Type ilalala el1i2ya of Track Cl a]2 of Track Cyt} 2) 4] 8 of Track Clr} 214] Bir} 214/868 Location on Location on Location on Location on 1 PC Board 2; 918 PC Board 3] 4/11) 2] 10 PC Board 716) 5/4} 3/11/10) 9] 8 PC Board TI119/2 +/ 5, @e/;,e@e 0 e,e ele 0 e e\e e e 0 e -| ole e 1 ie elele 1 lelelele e 1 |e 3 +|5)elele 2 elie el|e 2 e @el;eliete 2 = 3 eiele a ~{Ole e g 3 e ele gz 3 el/e e e);e 4 . 3 +|5|e|e 5 4 | elele e 5 4 |e eje e 5 |jele| je 5 -/ dQ; s s 5 e e e a 5 eo; ele e e a 6 e e a a EB l/s/s5lele 6 lele e 6 ie elele = 7 \|e;#/e/ a 8 e a -|O/e e 7 e 7 e\e e\e e a g ele +| 5) e@/@ 8 si elele 8 e e,e oe -{ 0] e | 9 ie e 9 e/eleleie n lelele 2 I|e e Note: In decimal and BCD the following alternatives are available.* mn ieee * 4 e ee Long Board for Mounting of L 8 jeiejee Resistors or Diodes 84 210 only Short Board In Series on Each In Parallet from Track (Interrupted Track to Track Tracks} (Non-interrupted Tracks) MO 1-C (Oecimal) MO 1-L (Decimal} M 14-L (Decimal) Break Before Maka MO 2-C (8CD) MQ 2-t (8CD) M 15-L (BCO Complement) Make Before Braak (on Request) M 13-C (Decimal ) M 13-L (Decimal) *Please consult us for special codes. 11FS ee Digital Switches Push Button - miniature - panel mount Series 84 230 Long circuit boards have track interruption to allow series mounting of components All modules easily assembled without hardware Black wheel standard white wheel with black marking on request Fast, smooth switching action Mechanical & Electrical Specifications Max. operating voltage: switched 50 VAC unswitched 120 VAC Rated amperage: switched 1-50mA Max. amperage: unswitched 500mA Min. contact resistance: .1 ohm Operating temperature: + 15F to + 160F (10C to + 70C) Materials Case and wheel: polycarbonate Push Buttons and thumbwheel: Delrin Storage temperature: Mechanical life: Printed circuit board: epoxy glass Printed contact: goid deposit Contacts: tin plated -40F to + 185F (40C to +85C) 500,000 operations Min. insulation resistance: 100,000 megohms Dielectric strength: between tracks: 500 VAC between tracks and ground: 2,500 VAC Panel cutout and front face dimensions in inches (mm) Dimensions in inches (mm) Midd hg LLL LE Ld dE, 938 A(.30 xn) + .24 inches B (.30 x n} + .12 inches C (.30 xn) + .14 inches D .89 inches E .12 inches (7.62 xn) + 6mm (7.62 xn) + 3mm (7.62 xn) + 3.5mm 22.5mm 3mm 20.9) Step A =a oS a Y 2 | 4 4 7 Vy i s , en VME SLILLLLG J 6 c c q a ; Q a = (7.62) 06 32 08 8 7 Onty with ia 06 06 30 (1.8) fang circuit boards (3) TT 5) ayy ba 63 102 6 4 (8) 94 (26) ar =a . _ He oy { 09x15 f (10) 03 (6) ; | Hl | (0,8 x0,4) oa F E a 58 F Qa 32 Pi "Step: .08 (2) - M01, M03, M04, M30 Tt ! 4 Step: .1 (2.54) - M29 - M31 Qo; - Step: .2 (5.08) - M02 ~ M07 f meta mel, A Series 84 230 12, | (TAT Digital Switches Push Button - subminiature - panel mount Series 84 231 Subminiature size only .59 inch high e Ail modules easily assembled without hardware Black wheel standard white wheel with black markings on request Fast, smooth switching action Mechanical & Electrical Specifications Max. operating voltage: switched 50 VAC unswitched 120 VAC Rated amperage: switched 1-50mA Operating temperature: + 15F to + 160F (-10C to + 70C) Storage temperature: 40F to + 185F (40C to + 85C) Mechanical life: Max. amperage: unswitched 500mA Dielectric strength: between tracks: 500 VAC Min. contact resistance: 1 ohm Min. insulation resistance: 1,000 megohms 500,000 operations between tracks and ground: 2,500 VAC Materials Case and wheel: polycarbonate Push Buttons and thumbwheel: Delrin Printed circuit board: epoxy glass Printed contact: gold deposit Contacts: tin plated Panel cutout and front face dimensions in inches (mm) GA, ALLL LLL LL Lg 3 Z, Z Z 7 SOLER f Cc -04 lo 01" 10 2.$mm) rs a ry a Series 84 231 [mm 4 A(.30 xn) + .20 inches (7.62 xn) + 5.08mm B(.80 xn) + .12 inches (7.62 xn) + 3mm C (.30 x n) + .14 inches (7.62 xn) + 3.5mm D .57 inches 14.5mm E .10 inches 2.54mm Dimensions in inches (mm) 0.035" (0.9) - except M01 +MOJ no holes Step qc { 59 0 (18) cs) \ 4 we Only with |, 08 long circuit boards (1.3) 6 a) 16 : ris. 1) oy > me tet 03 x.015 [= fs) (0.80.4) | 0.8) Step: .08 (2) - M01 Step: .1 (2.54) - M02, M03, M04, M07 13ES (HRT digital Switches Thumbwheel - flat PCB mount Series 84 235 on request Low profile specially designed for PCB mounting @ All modules easily assembled without hardware @ Black or red wheels standard white wheel with black marking @ Fast, smooth switching action Max. operating voltage: 36 VDC/150 VAC Min. contact resistance: .1 ohm Dielectric strength: between tracks: 500 VAC Rated amperage: switched 1-100mA Max. amperage: unswitched 500mA Mechanical & Electrical Specifications Operating temperature: + 18F to + 160F (-10C to + 70C) Storage temperature: Materials Case and wheel: polycarbonate Thumbwheel: Deirin Printed circuit board: epoxy glass Printed contact: gold deposit ~40F to + 185F (-40C to + 85C) Contacts: tin plated Min. insulation resistance: 1,000 megohms Mechanical life: 250,000 operations between tracks and ground: 2,500 VAC Dimensions in inches (mm) & 3 = 2 79 [+ (29) no, 024 x 008 : : (0.6 x0,2) || *. te e ay 30 (7,62) 55 aAx.4 (13,97) (2,54 x 10} (a7) 125 (3.17) 14| CS ClTY Digital Switches Truth Tables - Series 84 230, 84 231, and 84 235 The dots indicate the inter-connected tracks for each of the dial settings. B.C.0. B.C.D. + Complement 8.0.0. Complement 2 Position Repeating M02 M03 M07 M04 Cli}2/4i3 Clil2i4)8;1i2tala Cj1/}214)8 chil 2 84230 /10! 2] 4)! 8 10) 2) 4) 6a /3jsl7ig 4} 2) 6) 8/10 Location | 84230 5412/11 Location | 24231 | S| 4] 2/3) 4 5/10] 91 8} 711/243 5/1) 2)3] 4 an PC 84231 1213/4 an PC 84235 | 7/12/10/8| 4 2) Bit2/1t) 3/5) 11944 a 12/10) 4} 2 Board 84235 | 7141 8 Board 6 6 7 6 2 10 5 tle lete 0 e e sieieie @\elelisie -lole e 1 ee eie ele e elele _ +i lele 2 e e e e * e\e ee eae 43 _lole . 3 else eee sie e ele = +15 lele z 4 e e e ele elele e 23 Tate ;. 2 e\e e e;e e e e es e e a + 5 ele Ss 6 e| lee e eje e e ele e Tialel te 7 lelelele eleiele e e <Tetete 8 e e e ei@eie |e e eiele _lole . L 9 e\e e ele e eg s s e1s Hexadedimal Hexadecimal Hexadecimal 8.C.0. Decimal B.C.B. B.C.D. + Compiement Complement Only Mot M29 : M30 M31 Cyayil2)ajats 7/8/9 Cii}2t4a;s Cit{2j4/8/1/2 14/8 Cit; 2) 4ia Location =| 84230] 1 [41] 2/ 3] 4] 5/6 alg |10 Location | 84220 |5} 4/7] 6) 8 10/3; 5/9/17 4/2 |e 76 a) 4/6] 715 on PC 8423119] 6) 1119] 2itolaiajal7! 5 on PC 84235 | 8/12) 2 101 4 4110/14 2/8 |3 j2 (1 15 a) 12) 2/10) 4 Board 84235 (7) S/12/11/10! 9)8]4) 2/3] 4 Board 7 6 7 6 o /e e elelele eleleiele Tm) 1 ele oe ele e olele 1 |e! le 2 [el le e e e ele e eisle 2 |e 3 elele ejele ele s ee 3 e 4 le e e eje e elele e 4 |@ 5 ee |e e e e e e e 5 es e 6 |e! lele e ele e e ele e 5 |e z 7 |elelele elelele e e 7 |e e a 8 e e e eliejele el\ejeie a e e a 93 ole e e*; e ee e ele gq e e A e e @ e eo |e e e |e e B jelelel je elele e e e e c le ele elelele ejele o e\e ee eo |e e |e e eie\e E j@! jelele e elelele ele F [elelelele elelelele e Terminal Configuration Series 84 230 Series 84 231 Series 84 235 M02/M04/M07 M01/M03 The above diagrams show the numbering of each terminal for location purposes only. hO-O,] hO-O,, }O--0/] | Bae besst) | SSStttt bn fo O of so vepdaeaeaan bibhs rhhbs SbEALL peseceseses: 12345 12345 67891011 Please consult us for special codes. 15 eT y \? ES (ler Digital Switches How to Order Example of order: Thumbwheel 84 210 MOo2 [| [N] [R| [S| 4-6 1- Description Te Rocker Thumbwheel Push Button 2 Series M 84210 84213 84230 84211 84214 84231 84212 84218 84235 3 Code Definition Decimal .... 0... eee M01 Binary BCD 1-2-4-8 2... 0. ee. M02 ~ Binary BCD 1-2-4-8 + complement ........ M03 2 position repeating (+/) or (0/5) ......... M 04 BCD complement....................0-. M 07 BCD excess 6 + complement............. M 08 Hexadecimal BCD* ..................0.. M 29 Hexadecimal BCD + complement** ........ M 30 ~ Hexadecimal BCD complement** .......... M 31 *84 210, 84 230, 84 235 only **84 230 and 84 235 only 4~ Circuit Board Short (standard): C Long:/ ...... Ly 5 Case Color ~ Black: (standard) .... Ni Grey: (optional) ..... G 6 Wheel Color ~ Black: (standard) ....N Red: (standard) ..... Riz Yellow: (optional) .... J Green: (optional) ....V Blue: (optional) ...... R 7 Terminations Standard: Solder terminals ~ ............. Sv Other: For wire wrap . 1.0... eee X2 Pins for PC board soldering ......... X3 Connector (see accessories) ........ S 8 Mechanical stops (to be specified only when a limited setting range is required Indicate the 1st and last positions 2.9. possible positions: 4-5-6 ~ ( blocked positions: 7-8-9-0-1-2-3 > ACCESSORIES (see page 2) : (specify digital switch series number) @ Pair of End Caps including Clips. JE/ (color: N black: standard G grey: optional) Spacer: MI e Encoded Dummy Module: MC aiso specify code, circuit board, color connections Above example to be read as: 1 Thumbwheel switch 2 84 210 Separator including Clips: MS 3 binary BCD 1-2-4-8 -M 02 Connector for Plugging of Circuit C: 4 Long circuit board CR/W2-Solder Terminals 5 Black case CR/X2-Wire Wrapping Terminals 6 Red wheel CR/X3-PC Board Pins 7 ~ Standard solder terminals 8 Possible positions 4-5-6 16ESRI digital Switches L.E.D. Readouts - 3 main families TTL or C-MOS compatible With or without decoder 84 215 Wide readouts - (See Page 18) Decimal or hexadecimal display Compatible with our 84 211 Rocker Switches Accepts same accessories as 84 211 (End Plates Separators, etc.) \ Compatible with our 84 210 Thumbwheel Switch Accept same accessories as 84 210 (End Plates - Separators) TTL compatible with decoder N\ With decoder 84 216 Narrow readouts (See Page 19) Hexadecimal display Can be snapped into place to form an assembly TTL or C-MOS oo compatible D ecimal or hexadecimal display ee With or without decoder 84 217 (See Page 20) 17EST digital Switches L.E.D. Readouts - wide readout - panel mount Series 84 215 @ The L.E.D. readout modules type 84 215 can work alongside our Thumbwheel switches, 84 210 Series. @ The same accessories (end plates, separators, etc.) can be used. This allows the assembly of counting and programming systems, offering a consistent design in a small size. @ As with our Thumbwheel switches, these modules can be snapped into place to form an assembly. @ Choice of decoders (TTL or C-MOS), memory, voltages. @ Three versions are available. Common Specifications Figure Height: .433 in. (11 mm) Module Width: .62 in. (16 mm) Current Per Segment: 7 mA Color: Red (upon request) Operating Temperature: +32 +140 F. (0 C. to 60 C.) Case Color: Black (standard) or grey Display: H.P. 5082 - 7653 RBI - RBO output on all modules (except Al) Common Cathode F to Particular Specifications LT Typical Output EL Position of Consumption BCD Decoder (Lamp Output | Decimal Polnt . Of Decoder at Voltages Type of Code Cc-MOS TTL Test) (Memory)! Left Right 75 F (25 C) Available Disptay 5 V (standard) According to Al No No Yes No . e NLA. 12-15-24 V [on request) User's decoder 5 V (standard) A3 MM74 C48 No Yes No . 0.05 uA 12-15 V (on request) Decimal A6 No 9368 No Yes e 45 mA V Hexadecimal Terminations Dimensions in inches (mm) 1.2 MODULES WITH DECODER A3 and A6 (30 5 fn x 63) + (mx 34) + .43 SHORT BOARD _ : oR ee 08 12) DISPLAY i x 16) + 4m x 8 + 113) C = 31 (8) (28.5) PANEL THICKNESS LAL , 06 10.14 -sulo TE a (151035) gat : aads _ | 147040 29.@ jpg | __! i] 1.30 4 << PS 7R80 Li il _) 33) 39.5) cae tet or LT ACCORDING TO : oale THE DECODER t shale (2.54) > 7 THICKNESS Sv'* (See wiring i . Pane i iagram CIRCUIT DECODER diag ) LONG BOARD (3 2 70 6) L = .73(18,5) MODULES WITHOUT DECODER At PANEL CUTOUT 1 245 fa LJ ? $ 10 (n x .63) + (mx 31) + .3It LONG BOARDS L = 73 (18.5) SHORT BOARDS | = .33 (8.5) TERMINAL 5 COMMON Wiring Diagram: See Page 17 Note: nNumber of display modules ~ (in x 16) + m x 8 + 9f) | (nx 63) + (mx 3th + it (in x 16) + m x 8 + Bt) 1 7 51 (13) ( mNumber of accessory modules such as spacer module 81 5) 18a RrrE Digital Switches -L.E.D. Readouts - Wiring Diagrams 84 215 - A3 Voc A 8B C 0 4p Aa 8 C 0 RBO Ago DECODER MM74C48 Gi 2] 9 SEE NOTES: 1245,87 ACCESSIALE TERMINALS DISPLAY | _------- | HP 5082 - 7853 84 216 +5V AB CO BJ _. 49h (sl eee | | : Vec AQ At AZ A3 Rad 6] A80 GROUND 6 NO DECODER 9968 agi ti] Rat na it Op 80.0, SEE NOTES: aw | 2.4588 ACCESSIBLE =: jOISPLay | TERMINALS J ENO 357 | ae | 84 217 - A6 +5V bhp h 3] et GAGUNO DECODER 9368 5] R80 7} RBI {] op SEE NOTES 24588 4 ACCESSIBLE ap DISPLAY | TERMINALS | | MANAB4O 84 217 - A10 Vee aac 0 | [Ve a 68 c O Is} TEN GROUND DECODER MC14495 Ts] vcr 12 Nn 190 4 1S te EL 2] op SEE NOTES: j 62389810 | oo | co ACCESSIBLE TERMINALS 84 215 - AG SEE NOTES 2.4.5.48 | OP pisPLay ~~ ee ae S082 +7683 4 ACCESSIBLE TERMINALS 84 217 - A3 GROUND | SEE NOTES: ;1235,87 ACCESSIBLE ! TERMINALS i DISPLAY ST 4 Managaa! 84 217 - A& GROUND | SEE HOTES: (23,6788 ACCESSISLE 4 | DISPLAY TERMINALS |MANAEO | = 84 217 -A11 CONSULT FACTORY Vee A 0 hope c {S| LT GROUND DECODER MC14511 (4) al Y7) eL Op | see nares: j 4,396,788 ACCESSIa * TERMINALS | DISPLAY | Manaees 21ca Notes: 1. Vcc = 5, 12, 15 or 24 V according to the model (5 V standard - 12, 15 and 24 V on request). _ A,B, C and D correspond respectively to 1,2, 4and 8 of BCD code. _ In all C-MOS decoders, it is mandatory that all inputs be connected at ALL times either to the + orthe ground (except RBI-RBO - see note 5). The use of bias resistors is therefore necessary (see diagram).Should an input not be used atall,it may be directly connected either to the + or the ground (depending on the function). . For TTL decoders, shouid an input not be connected to either the + or the ground, the decoder might not work properly (while not connected), but it would not be destroyed. . The non-significant zeros are cancelled when RBI (Ripple Blanking Input) is connected to the ground, if several modules are connected together the RBI of the module adjacent to the module of the units (eg: ten or tenth) must be connected to the RBO (Ripple Blanking Output) of the next unit (hundred or hundreth) etc. The first RBOs (ten and tenth) as well as the units are left unconnected. (the zero of the unit is never cancelled). If the zero cancellation is not required, the RBI inputs must be connected to the + of the power supply and RBO must be left unconnected. TTT Digital Switches L.E.D. Readouts - Wiring Diagrams % + x RBI | RB! RBI = rail 3 3 u -~ x= 2 = 2 L L, | 2h. |} & [ps0 RBO RBO RBO @ RBO 10. . Connecting BI (Blanking Input) to the ground carn the display (otherwise connect Bl to + of supply) . Connecting LT (Lamp Test) input to ground make possible to contral all segments (otherwise connec to + of supply). Connecting EL (Enable Latch) to + of supply keeps display in memory. Otherwise connect EL to grou TEN output is in state O when digits from 0 to 9 displayed and in state 1 when digits from A to F displayed. VCR output is open for displays from O to E. When displayed the state is O". Example of Control of a Readout Module with a Thumbwheel Switch. BIAS RESISTORS SWITCH 22