Photoelectric sensors in M18 stainless steel housing E3FC Best durability for wash-down applications * High grade steel housing (SUS316L) * Withstands heat shock conditions * Epoxy resin preventing water ingress if connector is not fixed properly * Proven with various industrial detergents of Ecolab and Diversey (Details see page 10) * Bright visible red LED enabling easy alignment Ordering Information Sensors Sensor type Red light Sensing distance Through-beam Connection method Infrared light Model NPN output *1 PNP output E3FC-TP11 2M *1 pre-wired E3FC-TN11 2M M12 connector E3FC-TN21 *1 E3FC-TP21 *1 pre-wired E3FC-RN11 2M E3FC-RP11 2M M12 connector E3FC-RN21 E3FC-RP21 pre-wired E3FC-DN12 2M E3FC-DP12 2M M12 connector E3FC-DN22 E3FC-DP22 pre-wired E3FC-DN13 2M E3FC-DP13 2M M12 connector E3FC-DN23 E3FC-DP23 pre-wired E3FC-DN15 2M E3FC-DP15 2M M12 connector E3FC-DN25 E3FC-DP25 pre-wired E3FC-DN16 2M E3FC-DP16 2M M12 connector E3FC-DN26 E3FC-DP26 pre-wired E3FC-LN11 2M E3FC-LP11 2M M12 connector E3FC-LN21 E3FC-LP21 pre-wired E3FC-LN12 2M E3FC-LP12 2M M12 connector E3FC-LN22 E3FC-LP22 pre-wired E3FC-BN11 2M E3FC-BP11 2M M12 connector E3FC-BN21 E3FC-BP21 20 m Retro-reflective with MSR function *2 0.1 to 4 m with E39-R1S Diffuse-reflective 300 mm 1m 300 mm 1m BGS (background suppression) 100 mm 200 mm Transparent object detection (co-axial retro-reflective with MSR*2) 100 to 500 mm with E39-RP1 *1. The set type includes the emitter and receiver. *2. The Reflector is sold separately. Select the Reflector model most suited to the application. 1 E3FC Reflectors [Refer to Dimensions on page 12.] Reflectors required for Retro-reflective Sensors: A Reflector is not provided with the Sensor. Be sure to order a Reflector separately. Sensing distance Appearance Model Material Remarks 0.1 to 4 m E39-R1S ABS, PMMA IP67 0.1 to 4 m E39-R50 PET IP67, IP69K Ecolab tested plastic material 0 to 500 mm E39-RP1 ABS, PMMA for E3FC-B, enhanced PET detection, IP67 0.1 to 2 m E39-R16 enhanced chemical resistance for pharma SUS316L, glass (window) industry IP67, IP68, IP69K Mounting brackets [Refer to Dimensions on page 12.] A Mounting Bracket is not enclosed with the Sensor. Order a Mounting Bracket separately if required. Sensor Appearance Model (Material) Material Remarks E39-L183 SUS304 Mounting bracket E39-EL16 SUS316L M18 Flush mounting nut all types Sensor I/O connectors Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately. Sensor M12 connector types 2 Model Material Cable: Detergent Detergent resistant resistant PVC connector cable Connector: SUS316L Appearance Straight Cable type 2m Model Y92E-S12PVC4S2M-L 5m Y92E-S12PVC4S5M-L 4-wire Angle 2m Y92E-S12PVC4A2M-L 5m Y92E-S12PVC4A5M-L E3FC Ratings and Specifications Sensing method Model NPN Pre-wired output M12 Connector Pre-wired PNP output Item M12 Connector E3FC-TN11 2M E3FC-TN21 E3FC-TP11 2M E3FC-TP21 Sensing distance 20 m Spot diameter (reference value) Standard sensing object Differential travel Directional angle Light source (wavelength) Power supply voltage Through-beam Opaque: 7 mm dia.min. Retro-reflective with MSR function E3FC-RN11 2M E3FC-RN21 E3FC-RP11 2M E3FC-RP21 0.1 to 4 m (with E39-R1S) -- Opaque: 75 mm dia.min. -- 2 min. Red LED (624 nm) Red LED (624 nm) 10 to 30 VDC (include voltage ripple of 10%(p-p) max.) 40 mA max. Current consumption 25 mA max. (Emitter 25 mA max. Receiver 15 mA max.) NPN/PNP (open collector) Control output Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max. Operation mode Light-ON/Dark-ON selectable by wiring *1. Operation indicator (orange) Indicator Stability indicator (green) Power indicator (green): only Emitter of Through-beam Protection circuits Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection Response time 0.5 ms Sensitivity adjustment Fixed Ambient illumination (Receiver side) Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max. Ambient temperature range Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation) Ambient humidity range Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation) Insulation resistance 20 M min. at 500 VDC Dielectric strength 1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y and Z directions Degree of protection IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3. Pre-wired cable (2M) 152 g 76 g Weight Connector 44 g 22 g Case SUS 316L (1.4404) Lens and Display PMMA Material Adjuster - Nut SUS 316L (1.4404) Instruction sheet Instruction sheet Accessories M18 nuts (4 pcs) M18 nuts (2 pcs) *1. L-On fixed output available for Diffuse reflective and BGS models. Please add "A" in order code (e.g. E3FC-DP11A 2M) *2. IP68 Degree of Protection Specifications IP68 is defined by heat shock resistance with 20 test cycles of 30 min. changing between 3 and 60 surface tensioned water. *3. IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. 3 E3FC Sensing method Model NPN Pre-wired output M12 Connector Pre-wired PNP output Item M12 Connector Sensing distance Spot diameter (reference value) Standard sensing object Differential travel Directional angle Light source (wavelength) Power supply voltage Current consumption Control output Operation mode Indicator Protection circuits Response time Sensitivity adjustment Ambient illumination Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree of protection Pre-wired cable (2M) Weight Connector Case Lens and Display Material Adjuster Nut Accessories E3FC-DN12 2M E3FC-DN22 E3FC-DP12 2M E3FC-DP22 300 mm (white paper: 300 300 mm) 40 50 mm Sensing distance of 300 mm E3FC-DN13 2M E3FC-DN23 E3FC-DP13 2M E3FC-DP23 1m (white paper: 300 300 mm) 120 150 mm Sensing distance of 1 m Diffuse-reflective E3FC-DN15 2M E3FC-DN25 E3FC-DP15 2M E3FC-DP25 300 mm (white paper: 300 300 mm) 40 50 mm Sensing distance of 300 mm -- 20% max. -- Infrared LED (850 nm) Red LED (624 nm) 10 to 30 VDC (include voltage ripple of 10%(p-p) max.) 25 mA max. NPN/PNP (open collector) Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max. Light-ON/Dark-ON selectable by wiring *3. Operation indicator (orange) Stability indicator (green) Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection 0.5 ms One-turn adjuster Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max. Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation) Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation) 20 M min. at 500 VDC 1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions Destruction: 500 m/s2 3 times each in X, Y and Z directions IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3. 76 g 22 g SUS 316L (1.4404) PMMA POM SUS 316L (1.4404) Instruction sheet M18 nuts (2 pcs) *1. L-On fixed output available for Diffuse reflective and BGS models. Please add "A" in order code (e.g. E3FC-DP11A 2M) *2. IP68 Degree of Protection Specifications IP68 is defined by heat shock resistance with 20 test cycles of 30 min. changing between 3 and 60 surface tensioned water. *3. IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. 4 E3FC-DN16 2M E3FC-DN26 E3FC-DP16 2M E3FC-DP26 1m (white paper: 300 300 mm) 120 150 mm Sensing distance of 1 m E3FC Sensing method Model NPN output Item PNP output Pre-wired M12 Connector Pre-wired M12 Connector Sensing distance Spot diameter (reference value) Standard sensing object Differential travel Directional angle Light source (wavelength) Power supply voltage Current consumption Control output Operation mode Indicator Protection circuits Response time Sensitivity adjustment Ambient illumination Ambient temperature range Ambient humidity range Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree of protection Weight Pre-wired cable (2M) (packed state/only Connector sensor) Case Lens and Display Material Adjuster Nut Accessories BGS (Background suppression) E3FC-LN11 2M E3FC-LN21 E3FC-LP11 2M E3FC-LP21 100 mm (white paper: 300 300 mm) 10 10 mm Sensing distance of 100 mm 20% max. E3FC-LN12 2M E3FC-LN22 E3FC-LP12 2M E3FC-LP22 200 mm (white paper: 300 300 mm) 10 15 mm Sensing distance of 200 mm -- Transparent detected with P-opaquing function E3FC-BN11 2M E3FC-BN21 E3FC-BP11 2M E3FC-BP21 100 to 500 mm (with E39-RP1) -- glass (t = 1.0 mm): 150 x 150 mm -- -- Red LED (624 nm) 10 to 30 VDC (include voltage ripple of 10%(p-p) max.) 25 mA max. NPN/PNP (open collector) Load current: 100 mA max. (Residual voltage: 3 V max.), Load power supply voltage: 30 VDC max. Light-ON/Dark-ON selectable by wiring *1. Operation indicator (orange) Stability indicator (green) Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection 0.5 ms Fixed One-turn adjuster Incandescent lamp: 3,000 lx max./ Sunlight: 10,000 lx max. Operating: -25 to 55C/ Storage: -30 to 70C (with no icing or condensation) Operating: 35 to 85%/ Storage: 35 to 95% (with no condensation) 20 M min. at 500 VDC 1,000 VAC at 50/60 Hz for 1 min. between current-carrying parts and case Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y and Z directions Destruction: 500 m/s2 3 times each in X, Y and Z directions IEC: IP67, IP68 *2., DIN 40050-9: IP69K *3. IEC: IP67, DIN 40050-9: IP69K *3 76 g Approx. 95 g/Approx. 65 g 22 g Approx. 50 g/Approx. 20 g SUS316L (1.4404) PMMA - SUS316L (1.4404) Instruction sheet M18 nuts (2 pcs) POM *1. L-On fixed output available for Diffuse reflective and BGS models. Please add "A" in order code (e.g. E3FC-DP11A 2M) *2. IP68 Degree of Protection Specifications IP68 is defined by heat shock resistance with 20 test cycles of 30 min. changing between 3 and 60 surface tensioned water. *3. IP69K Degree of Protection Specifications IP69K is a protection specification stipulated by DIN 40050 Part 9 of the German standards. The test item is sprayed with 80C water from a nozzle of a specified shape at a water pressure of 80 to 100 bar. The amount of water is 14 to 16 liters per minute. The distance between the test item and the nozzle is 10 to 15 cm. The water is discharged at angles of 0, 30, 60, and 90 from the horizontal plane for 30 seconds at each angle while the test item is rotated horizontally. 5 E3FC Engineering Data (Reference Value) Parallel Operating Range Through-beam Models E3FC-T@ Retro-reflective Models (with MSR function) E3FC-R@ Distance Y (mm) 800 600 400 0 X 100 0 X -50 -400 -100 -600 -150 -800 5 10 15 20 25 -200 0 30 35 40 Distance X (m) Operating Range Diffuse-reflective Models E3FC-D@2 2 4 6 8 Distance X (m) E3FC-D@3 Distance Y (mm) Distance Y (mm) Y Y -200 30 Reflector: E39-R1S 150 50 200 -1000 0 200 Sensing object: white paper 20 10 100 E3FC-D@5 Sensing object: 300 x 300 (mm) white paper 80 60 40 Distance Y (mm) Distance Y (mm) 1000 20 0 -10 X 100 200 300 0 -20 -40 -40 -60 Y 60 40 0 -10 -40 Sensing object: white paper 20 0 E3FC-L@2 300 400 500 600 700 Distance X (mm) 40 Reflector: E39-RP1 30 20 Y X -10 E3FC-L@1 -20 Z -30 -30 -80 X 400 200 0 Y 200 X 100 10 -20 -60 -100 0 Transparent object detection models E3FC-B@1 30 10 -20 6 40 20 -100 0 X 200 400 600 800 1000 1200 1400 1600 1800 Distance X (mm) Distance Y (mm) Sensing object: 300 x 300 (mm) white paper 80 Distance Z (mm) Distance Y (mm) 100 Y -80 BGS Models E3FC-L@1, E3FC-L@2 E3FC-D@6 40 -20 -100 0 400 500 600 Distance X (mm) 60 20 -80 -30 0 Sensing object: white paper 80 0 -60 Y -20 100 600 800 1000 1200 1400 1600 Distance X (mm) -40 0 X 50 100 150 200 250 Distance X (mm) -40 0 200 400 600 800 1000 1200 Distance X (mm) E3FC Retro-reflective Models (with MSR function) E3FC-R@ Excess gain ratio (multiple) 100 70 50 30 10 7 5 3 100 70 Reflector: E39-R1S 50 30 10 7 5 3 Operating 1 level Operating 1 level 0.3 0.3 0.7 0.5 0.1 0.7 0.5 0 10 20 30 40 50 60 0.1 70 0 2 4 6 8 Distance (m) E3FC-D@3 100 70 Sensing object: 100 x 100 (mm) white paper 50 30 10 7 5 3 Excess gain ratio (multiple) Excess gain ratio (multiple) Diffuse-reflective Models E3FC-D@2 10 Distance (m) E3FC-D@5 100 70 Sensing object: 300 x 300 (mm) white paper 50 30 10 7 5 3 Excess gain ratio (multiple) Excess gain ratio (multiple) Excess Gain vs. Distance Through-beam Models E3FC-T@ 100 70 Sensing object: 300 x 300 (mm) white paper 50 30 10 7 5 3 Operating 1 level Operating 1 level Operating 1 level 0.3 0.3 0.3 0.7 0.5 0.1 0.7 0.5 0 200 400 600 800 0.1 1000 0.7 0.5 0 0.5 1 1.5 Distance (mm) Excess gain ratio (multiple) Excess gain ratio (multiple) 2.5 3 Distance (m) 0.1 0 200 400 600 800 1000 Distance (mm) Transparent object detection models E3FC-B@1 E3FC-D@6 100 70 Sensing object: 300 x 300 (mm) white paper 50 30 10 7 5 3 100 70 Reflector: E39-RP1 50 30 10 7 5 3 Operating 1 level Operating 1 level 0.3 0.3 0.7 0.5 0.7 0.5 0.1 2 0 0.5 1 1.5 2 2.5 3 0.1 0 1 2 3 4 Distance (m) Distance (m) Sensing distance (mm) Sensing distance (mm) Sensing Distance vs. Sensing Object Material BGS Models E3FC-L@1 E3FC-L@2 120 100 80 250 200 150 60 100 40 50 20 0 0 White paper Black paper SUS Material White paper Black paper SUS Material 7 E3FC Output circuit diagram PNP Output Model Operation mode Light-ON Operation selector Timing charts Light incident Light interrupted Operation indicator ON (orange) OFF ON Output transistor OFF Operate Load (e.g., relay) Reset Connect the pink wire (Pin(2)) to the brown (Pin(1)) Output circuit Through-beam Receivers, Retro-reflective Models, Diffuse-reflective Models Operation indicator (Orange) (Between blue and black leads) E3FC-TP@ E3FC-RP@ E3FC-DP@ E3FC-BP@ Dark-ON Light incident Light interrupted Operation indicator ON (orange) OFF ON Output transistor OFF Load Operate (e.g., relay) Reset (Between blue and black leads) Stability indicator (Green) Photoelectric Sensor Main Circuit Connect the pink wire (Pin(2)) to the blue (Pin(3)) or open the pink wire (Pin(2)) 1 Brown 10 to 30 VDC Light-ON Black 4 100 mA max. (Control output) Load (Relay) Blue 3 2 0V Pink Dark-ON Through-beam Emitter Power indicator (green) Brown 1 Photoelectric Sensor Main Circuit 10 to 30 VDC Blue 3 NEAR Light-ON Output transistor Load (e.g., relay) ON OFF Operate Reset (Between blue and black leads) E3FC-LP@ NEAR FAR Operation indicator ON (oramge) OFF Dark-ON Output transistor Load (e.g., relay) ON OFF Operate Reset (Between blue and black leads) 8 Background suppression. FAR Operation indicator ON (orange) OFF Connect the pink wire (Pin(2)) to the brown (Pin(1)) Connect the pink wire (Pin(2)) to the blue (Pin(3)) or open the pink wire (Pin(2)) Operation indicator (Orange) Stability indicator (Green) Photoelectric Sensor Main Circuit 1 Brown 10 to 30 VDC Light-ON Black 4 Blue 100 mA max. (Control output) Load (Relay) 3 2 0V Pink Dark-ON E3FC NPN Output Operation mode Model Light-ON E3FC-TN@ E3FC-RN@ E3FC-DN@ E3FC-BN@ Dark-ON Operation selector Timing charts Light incident Light interrupted Operation indicator ON (orange) OFF ON Output transistor OFF Operate Load (e.g., relay) Reset (Between brown and black leads) Output circuit Through-beam Receivers, Retro-reflective Models, Connect the Diffuse-reflective Models pink wire (Pin(2)) to the brown (Pin(1)) 10 to 30 VDC Brown Stability Operation 1 or open the indicator indicator Light-ON Load (Green) (Orange) pink wire (Relay) Black (Pin(2)) Photo100 mA max. 4 electric Sensor Main Circuit Light incident Light interrupted Operation indicator ON (orange) OFF ON Output transistor OFF Load Operate (e.g., relay) Reset (Between brown and black leads) (Control output) 3 Connect the pink wire (Pin(2)) to the blue (Pin(3)) 2 Blue 0V Dark-ON Pink Through-beam Emitter Power indicator (green) Brown 1 Photoelectric Sensor Main Circuit 10 to 30 VDC Blue 3 NEAR FAR Operation indicator ON (orange) OFF Light-ON Output transistor Load (e.g., relay) ON OFF Operate Reset (Between brown and black leads) E3FC-LN@ NEAR Output transistor Load (e.g., relay) ON OFF Operate Reset (Between brown and black leads) 1 4 3 Connect the pink wire (Pin(2)) to the blue (Pin(3)) 2 100 mA max. (Control output) Blue 0V Pink Connectors (Sensor I/O connectors) M12 Connector Pin Arrangement M12 4-wire Connectors 1 Load (Relay) Black Connector Pin Arrangement 2 10 to 30 VDC Brown Light-ON electric Sensor Main Circuit FAR Operation indicator ON (oramge) OFF Dark-ON Background suppression. Connect the pink wire (Pin(2)) to the brown (Pin(1)) Stability Operation or open the indicator indicator (Green) (Orange) pink wire (Pin(2)) Photo- Dark-ON Pin No. 4 2 3 1 3 4 Classification DC Wire color Brown White Blue Black 1 2 3 4 Wire color Connector pin No. Application Brown Power supply (+V) White Blue Black L/on * D/on selectable Power supply (0 V) Output 9 E3FC Safety Precautions Refer to Warranty and Limitations of Liability. 3. Do not use the sensor under the environment under the other conditions in excess of rated. 4. Do not use the sensor in place that is exposed by direct sunlight. 5. Do not use the sensor in place where the sensor may receive direct vibration or shock. 6. Do not use the thinner, alcohol, or other organic solvents. 7. Never disassemble, repair nor tamper with the sensor. 8. Please process it as industrial waste. WARNING This product is not designed or rated for directly or indirectly ensuring safety of persons. Do not use it for such a purpose. CAUTION Never use the product with an AC power supply. Precautions for Correct Use Do not use the product with voltage in excess of the rated voltage. Do not use the product with incorrect wiring. Otherwise, explosion, fire, malfunction may result. Precautions for Safe Use Be sure to follow the safety precautions below for added safety. 1. Do not use the sensor under the environment with explosive, flammable or corrosive gas. 2. Do not use the sensor under the oil or chemical environment exceeding specifications. Performance is assured for typical detergents and disinfectants used in Food & Beverage industry. Refer to the following table when using these agents: Manufacturer Diversey Ecolab General 10 Product name Diverfoam SMS HD Oxofoam Acifoam Divosan Hypochlorit Divosan Forte P3-topactive(R) 200 P3-topax(R) 56 P3-topactive(R) OKTO P3-topax(R) 990 P3-topax(R) 66 H2O2 Concentration 5% 5% 5% 1% 1% 5% 5% 3% 3% 3% 6,5% Testtime 720 h 720 h 720 h 720 h 720 h 720 h 720 h 720 h 720 h 720 h 240 h 1. Laying Sensor wiring in the same conduit or duct as high-voltage wires or power lines may result in malfunction or damage due to conduit or use shielded cable. 2. Do not pull on the cable with excessive force. 3. If a commercial switching regulator is used, ground the FG (frame ground) terminal. 4. The sensor will be available 100 ms after the power supply is tuned ON. Start to use the sensor 100 ms or more after turning ON the power supply. If the load and the sensor are connected to separate power supplies, be sure to turn ON the sensor first. 5. Output pulses may be generated even when the power supply is OFF. Therefore, it is recommended to first turn OFF the power supply for the load or the load line. 6. The sensor must be mounted using the provided nuts. The proper tightening torque is 20 Nm max.. E3FC (Unit: mm) Dimensions Tolerance class IT16 applies to dimensions in this data sheet unless otherwise specified. Sensors 48 Operation indicator (orange) 26.4 Stability indicator (green) 26.4 Stability indicator (green) M18x1 Receiver 29.9 Emitter 23 48 37,5 Operation indicator (orange) Stability indicator (green) 26,4 29,9 M12x1 Optical axis (Through-beam, transparent models) Optical axis Vinyl insurated round cord 4 dia. 4 cores (conductor cross sectional area: 0.128 mm (AWG26)/insulation outside diameter: 0.85 dia.) standard length 2 m 48 37,5 26,4 M18x1 Sensitivity adjuster (Diffuse reflective, transparent models) 2 1 Operation indicator (orange) Stability indicator (green) Receiver 3 16,6 M18x1 29.9 16,6 Vinyl insurated round cord 4 dia. 4 cores (conductor cross sectional area: 0.128 mm (AWG26)/insulation outside diameter: 0.85 dia.) standard length 2 m M12 Connector Models E3FC-T@2@ E3FC-R@2@ E3FC-D@2@ E3FC-L@2@ E3FC-B@2@ 16.6 16.6 M18x1 Sensitivity adjuster (Diffuse reflective, transparent models) Operation indicator (orange) 35.7 7 48 35.7 23 29,9 M12x1 4 7 Pre-wired Models E3FC-T@1@ E3FC-R@1@ E3FC-D@1@ E3FC-L@1@ E3FC-B@1@ Emitter Optical axis Optical axis (Through-beam, transparent models) Terminal No. Specification 1 +V 2 L/on * D/on selectable 3 0V 4 Output Attached nut 4 24 dia. Three, 24 M18 4 P=1 11 E3FC Accessories (Order Separately) Reflectors E39-R1S 3.5 80.3 E39-R50 40.3 4.2 34 Two, 3.5 dia. 1 7.5 59.9 51.99 56 60 3.85 7 52 8 34 36.95 41 2.7 1.6 E39-RP1 E39-R16 8.5 44 43 3 37 5 72 63.6 reflective surface 21.8 x 27.8 mm O 3.2 15 80 30 0.2 Reflector R4 Two, 3.5 dia. Mounting brackets E39-L183 Flush mounting nut E39-EL16 O26 45 42 4.3 Two, R15 22 Two, 30 Two, 4.3 37 15 M18x1 1.5 (R16.5) 90 18.2 dia. 36.5 20 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 12 4 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ("Omron"). Omron objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron's payment terms and (ii) Buyer has no past due amounts. 4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in "break down" situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed. 13. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- 14. 15. 16. 17. 18. ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron247.com or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to "forbidden" or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, "including" means "including without limitation"; and "Omron Companies" (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use 1. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO 2. 3. 4. 5. ADDRESS THE RISKS, AND THAT THE OMRON'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON AUTOMATION AND SAFETY * THE AMERICAS HEADQUARTERS * Chicago, IL USA * 847.843.7900 * 800.556.6766 * www.omron247.com OMRON CANADA, INC. * HEAD OFFICE Toronto, ON, Canada * 416.286.6465 * 866.986.6766 * www.omron247.com OMRON ARGENTINA * SALES OFFICE Cono Sur * 54.11.4783.5300 OMRON ELECTRONICS DE MEXICO * HEAD OFFICE Mexico DF * 52.55.59.01.43.00 * 01-800-226-6766 * mela@omron.com OMRON CHILE * SALES OFFICE Santiago * 56.9.9917.3920 OMRON ELECTRONICS DE MEXICO * SALES OFFICE Apodaca, N.L. * 52.81.11.56.99.20 * 01-800-226-6766 * mela@omron.com OTHER OMRON LATIN AMERICA SALES 54.11.4783.5300 OMRON ELETRONICA DO BRASIL LTDA * HEAD OFFICE Sao Paulo, SP, Brasil * 55.11.2101.6300 * www.omron.com.br OMRON EUROPE B.V. * Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. * +31 (0) 23 568 13 00 * www.industrial.omron.eu Authorized Distributor: Automation Control Systems * Machine Automation Controllers (MAC) * Programmable Controllers (PLC) * Operator interfaces (HMI) * Distributed I/O * Software Drives & Motion Controls * Servo & AC Drives * Motion Controllers & Encoders Temperature & Process Controllers * Single and Multi-loop Controllers Sensors & Vision * Proximity Sensors * Photoelectric Sensors * Fiber-Optic Sensors * Amplified Photomicrosensors * Measurement Sensors * Ultrasonic Sensors * Vision Sensors Industrial Components * RFID/Code Readers * Relays * Pushbuttons & Indicators * Limit and Basic Switches * Timers * Counters * Metering Devices * Power Supplies Safety * Laser Scanners * Safety Mats * Edges and Bumpers * Programmable Safety Controllers * Light Curtains * Safety Relays * Safety Interlock Switches E65I-E-02 12/14 Note: Specifications are subject to change. Printed on recycled paper. (c) 2014 Omron Electronics LLC Printed in U.S.A.