13
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
STEP-Z
Interconnection System
STEP-Z Interconnection System (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
25.00 [.984] Plugs
Stencil Connector Outline
Onto Board
Position A2
Solder Balls
Position A1
Contacts In
These Rows Are
Tied Together
(Commoned)
Ø 0.60–0.55
[.024–.022]
25.50
[1.004]
9.00
[.354]
1.00
[.039]
8x
2 Plcs.
2.00
[.079]
73x
36x
Ref.
A
25.95 ±0.25
[1.022 ±.010]
24.65 ±0.12
[.970 ±.005]
1.30
[.051]
0.65
[.026]
18.00
[.709]
28.60
[1.126]
25.50
[1.004]
Position T25
Optional Pick-Up Cap
0.55
[.022]
Ø 0.76
[.030]
Ref.
ARef.
B
C
No. of Dimensions Plating Part Numbers
Pos.* ABC With Pick & Place Cap
200 38.20 31.85 15.93 SnPb 2-1761614-5䢇
1.504 1.254 .627 Pb-free 7-1761614-5
296 53.75 47.45 23.725 SnPb 2-1761616-5䢇
2.116 1.868 .934 Pb-free 7-1761616-5
* Signal contacts only, ground contacts not included.
Tray packaged Part Numbers shown. Contact Tyco Electronics Engineering for Tape and Reel
packaged versions.
Recommended PC Board Layout
14
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Introduction to the MICTOR Interconnection System
(0.64 [.025] Centerline)
Product Facts
■76 dedicated signal lines
per linear inch
■Surface mount family
designed for parallel and
right-angle board-to-board,
flex-to-board and cable-to-
board configurations
■0.64 [.025] centerline
contact spacing
■Redundant interfaces on
mated contacts
■Fifteen mated stack heights
available ranging from 6.60
[.260] to 31.90 [1.256]
■Infrared and forced air
convection compatible
housing materials
■Designed for 50-ohm
systems
■Connector housings
polarized for correct mating
■Built-in connector-to-board
retention feature
■Connector can be separated
by peeling from one end to
the other
■Various packaging styles
can be made available for
automated assembly
(tape and reel, tubes)
■Recognized under the
Component Program of
Underwriter
Laboratories Inc.
File No. E28476
R
The MICTOR connector
family is based on the
microstrip concept of two
rows of signal contacts
divided by a center power
ground plane. MICTOR
connectors are mother-
board and daughtercard
compatible and include
designs for cable-to-board
applications.
Various mated heights are
available for parallel board-
to-board systems. Custom
stacking heights can be
provided. The MICTOR
connector family is avail-
able in 0.64 [.025] center-
lines and in sizes ranging
from 38 signal positions to
266 positions (in increments
of 38 positions). There is a
discrete ground bus every
12.7 [.50] of the connector
length, which can be
assigned to either power or
ground in any combination.
Redundant interfaces on
every signal line provide
added reliability. Two plating
options are available to
meet the needs of various
applications.
The housing material is
a liquid crystal polymer,
compatible with infrared
and forced air convection
operations.
The connector system uses
the solid ground bus
between the rows of signals
to provide low crosstalk and
excellent high-speed signal
characteristics.
MICTOR Connector Cross Section
Connectors are shown at point where signal contact first touch each other.
Connectors are designed to be fully mated when the two “Z” datums meet.
Green = Receptacle housing
Red = Plug housing
Blue = Signal contacts
Brown = Ground bus contacts
Redundant
points of
contact for
high reliability
Center ground bus for
improved signal integrity
and matched impedance
Compliant
SMT solder
lead design
15
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Connector Cross Section
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
16
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Material and Performance Specifications, MICTOR Connectors
Performance Specifications Ratings
Voltage — 30 vac
Current — Signal; rated 1.0 Amps, fully derated 0.5 Amps
Ground; rated 11.5 Amps, fully derated 7.6 Amps
Temperature — -55°C to +125°C
Electrical Characteristics
Characteristic Impedance — 50±5 ohms at 1 ns
Termination Resistance —∆R 10 milliohms max.; Specification 109-6-1
Insulation Resistance — 10,000 megohms min.; Specification 109-208-1
Dielectric Withstanding Voltage — 500 vac at sea level; Specification 109-29-1
Mechanical Characteristics
Solderability — Solderable area shall have a 95% min. solder coverage; Specification 109-11-1
Vibration (Random) — No discontinuities of 1 µs or longer duration; Specification 109-21-5
Physical Shock — No discontinuities of 1 µs or longer duration; Specification 109-26-1
Durability (Tested to) — Mate and unmate samples at a rate of 600 cycles max. per hour. 25 cycles, gold plating;
500 cycles, palladium-nickel plating; Specification 109-27
Contact Retention — 1 lb min.; Specification 109-30
Mating Force — 152 oz max. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Unmating Force — 19 oz min. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus;
Specification 109-42
Environmental Characteristics
Thermal Shock — Subject mated samples to 5 cycles between -55°C and +125°C; Specification 109-22
Humidity - Temperature Cycling — Subject mated samples to 10 cycles between +25°C and +65°C at 95% RH;
Specification 109-23-3, Condition B
Temperature Cycling — Subject mated samples to 1024 cycles between -40°C and +60°C at 2 hours per cycle;
Specification 109-75-1
Temperature Life — Subject mated samples to temperature life at +118°C for 792 hours;
Specification 109-43
Mixed Flowing Gas — Subject mated samples to environmental class II for 14 days; Specification 109-85-2
Material Specifications Material
Housing — Liquid crystal polymer, black
Contacts — High reliability copper alloy
Ground Bus — Phosphor bronze
Finish (Gold Plating)
Contacts and Ground Bus — Duplex plated 0.00076 [.000030] min. gold in mating area, 0.00381 [.000150] min. tin-lead on
leads, with entire contact and ground bus underplated 0.00178 [.000070] min. nickel
Finish (Palladium-Nickel Plating)
Contacts and Ground Bus — Duplex plated 0.000013 [.000005] min. gold over 0.00076 [.000030] min. palladium-nickel in
mating area, 0.00381 [.000150] min. tin-lead on leads, with entire contact and ground bus underplated 0.00178 [.000070] min.
nickel
Finish (Lead-Free Plating)
Contacts and Ground Bus — 0.00076 [.000030] min. gold on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per
ASTM B 545 on leads, all over 0.00177-0.00445 [.000070-.000175] nickel.
Or
0.00013 [.000005] min. gold over, 0.00076 [.000030] min. palladium nickel on contact area, 0.00381-0.00635 [.000150-.000250]
matte tin per ASTM B 545 on leads, all over 0.00191-0.00445 [.000075-.000175] nickel.
30 µ Gold and Palladium
Nickel Plated Vertical
Connectors
MICTOR Stack Height Combinations
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
Standard Receptacle
(Pages 36 and 37)
6.60 [.260] Plug
(Pages 19 and 20)
9.00 [.354] Plug
(Pages 21 and 22)
11.00 [.430] Plug
(Pages 23 and 24)
12.57 [.495] Plug
(Pages 25 and 26)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Standard Receptacle
(Pages 36 and 37)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Standard Receptacle
(Pages 36 and 37)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
Raised Receptacle
(Pages 38 and 39)
*This connector not available in Palladium Nickel.
6.60 [.260] Plug
(Pages 19 and 20)
9.00 [.354] Plug
(Pages 21 and 22)
18.75 [.738] Plug
(Page 29)
11.00 [.430] Plug
(Pages 23 and 24)
12.57 [.495] Plug
(Pages 25 and 26)
22.86 [.900] Plug
(Pages 32 and 33)
17.96 [.707] Plug
(Pages 27 and 28)
18.75 [.738] Plug*
(Page 29)
20.00 [.785] Plug*
(Pages 30 and 31)
22.86 [.900] Plug*
(Pages 32 and 33)
6.60
[.260]
9.00
[.354]
11.00
[.430]
12.57
[.495]
21.60
[.850]
20.00
[.785]
18.75
[.738]
18.00
[.709]
15.60
[.615]
22.86
[.900]
27.00
[1.062]
27.80
[1.093]
29.00
[1.143]
31.90
[1.255]
17
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Stack Height Combinations
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
18
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Right-Angle (Straddle Mount) Combinations
30 µ Gold & Palladium
Nickel Connections
Vertical Receptacle with
Right-Angle Plug
Vertical Plug with
Right-Angle Receptacle
Right-angle versions are
designed for paddlecard
type applications. It is highly
recommended that cus-
tomers who are considering
right-angle applications
contact Tyco Electronics
Engineering to review their
applications as the potential
for tolerancing issues
and/or issues of solder joint
integrity can be highly
application specific.
MICTOR Vertical Plugs
6.60 [.260]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*6.60 [.260] stack height when
mated to vertical receptacle;
15.62 [.615] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
8.72
[.343]
Max.
6.53 ±0.28
[.257 ±.011]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008]=E
F
Position No. 1 Indicator
Standard Barbless
Ground Bus Leads
Ø 1.94
[.077]
6.38 ±0.23
[.251 ±.009]Contact
Housing
C±0.20
[±.008]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]5.28 ±0.03
[.208 ±.001]
Ref.
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
6.35
[.250]
0.64
[.025]
3.53
[.139]
1.27
[.050]
Orientation Hole
(See Note)
Position No. 1
Position No. 2
Pad
CRef.
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
19
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Plugs
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
20
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
Part Numbers
Dimensions Platings Barbed G/B Leads Barbless G/B Leads
No. of Solder T&R T&R
Pos. ABCDE F Tail Contact Tube Vacuum Caps Tube Vacuum Caps
With Without With Without
1.35 [.053] Gold 767007-8䢇767111-8䢇767111-1䢇767116-1䢇767118-1䢇767118-8䢇
2.72 [.107] SnPb PdNi 767056-1䢇—.—.—.—.—.
38 25.40 22.81 11.43 0—
2.64 [.104] — .—.—.767117-1䢇767119-1䢇767119-8䢇
1.000 .898 .450 1.35 [.053] Gold 5767007-8䢇5767111-8䢇5767111-1䢇5767116-1䢇5767118-1䢇5767118-8䢇
2.72 [.107] Pb-free PdNi 5767056-1䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-1䢇5767119-1䢇5767119-8䢇
1.35 [.053] Gold 767007-9䢇767111-9䢇767111-2䢇767116-2䢇767118-2䢇767118-9䢇
2.72 [.107] SnPb PdNi 767056-2䢇—.—.—.—.—.
7638.10 31.70 24.13 112.70 2.64 [.104] — .—.—.767117-2䢇767119-2䢇767119-9䢇
1.500 1.248 .950 .500 1.35 [.053] Gold 5767007-9䢇5767111-9⽧5767111-2⽧5767116-2䢇5767118-2䢇5767118-9䢇
2.72 [.107] Pb-free PdNi 5767056-2䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-2䢇5767119-2䢇5767119-9䢇
1.35 [.053] Gold 1-767007-0䢇1-767111-0䢇767111-3䢇767116-3䢇767118-3䢇1-767118-0䢇
2.72 [.107] SnPb PdNi 767056-3䢇—.—.—.—.—.
114 50.80 48.21 36.83 225.40 2.64 [.104] — .—.—.767117-3䢇767119-3䢇1-767119-0䢇
2.000 1.898 1.450 1.000 1.35 [.053] Gold 1-5767007-0 1-5767111-0 5767111-3䢇5767116-3䢇5767118-3䢇1-5767118-0䢇
2.72 [.107] Pb-free PdNi 5767056-3䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-3䢇5767119-3䢇1-5767119-0䢇
1.35 [.053] Gold 1-767007-1䢇1-767111-1䢇767111-4䢇767116-4䢇767118-4䢇1-767118-1䢇
2.72 [.107] SnPb PdNi 767056-4䢇—.—.—.—.—.
152 63.50 60.91 49.53 338.10 2.64 [.104] — .—.—.767117-4䢇767119-4䢇1-767119-1䢇
2.500 2.398 1.950 1.500 1.35 [.053] Gold 1-5767007-1 1-5767111-1 5767111-4䢇5767116-4䢇5767118-4䢇1-5767118-1䢇
2.72 [.107] Pb-free PdNi 5767056-4䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-4䢇5767119-4䢇1-5767119-1䢇
1.35 [.053] Gold 1-767007-2䢇1-767111-2䢇767111-5䢇767116-5䢇767118-5䢇1-767118-2䢇
2.72 [.107] SnPb PdNi 767056-5䢇—.—.—.—.—.
190 76.20 73.61 62.23 450.80 2.64 [.104] — .—.—.767117-5䢇767119-5䢇1-767119-2䢇
3.000 2.898 2.450 2.000 1.35 [.053] Gold 1-5767007-2 1-5767111-2 5767111-5䢇5767116-5䢇5767118-5䢇1-5767118-2䢇
2.72 [.107] Pb-free PdNi 5767056-5䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-5䢇5767119-5䢇1-5767119-2䢇
1.35 [.053] Gold 1-767007-3䢇—.—.767116-6䢇—.—.
2.72 [.107] SnPb PdNi 767056-6䢇—.—.—.—.—.
228 88.90 86.31 74.93 563.50 2.64 [.104] — .—.—.767117-6䢇—.—.
3.500 3.398 2.950 2.500 1.35 [.053] Gold 1-5767007-3䢇—.—.5767116-6䢇—.—.
2.72 [.107] Pb-free PdNi 5767056-6䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-6䢇—.—.
1.35 [.053] Gold 1-767007-4䢇—.—.767116-7䢇—.—.
2.72 [.107] SnPb PdNi 767056-7䢇—.—.—.—.—.
266 101.60 99.01 87.63 676.20 2.64 [.104] — .—.—.767117-7䢇—.—.
4.000 3.898 3.450 3.000 1.35 [.053] Gold 1-5767007-4䢇—.—.5767116-7䢇—.—.
2.72 [.107] Pb-free PdNi 5767056-7䢇—.—.—.—.—.
2.64 [.104] — .—.—.5767117-7䢇—.—.
Notes: 1. Contact Product Engineering regarding options not present in this table.
2. T&R vacuum caps are placed on some connectors to allow them to be picked up with robotic placement equipment that uses vacuum pick-up
nozzles.
6.60 [.260]
Stacking Height (Continued)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
21
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
9.00 [.354]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
* 9.00 [.354] stack height when
mated to vertical receptacle;
18.00 [.709] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.33
[.328]
Max.
6.35
[.250]
0.64
[.025]
3.53
[.139]
8.86 ±0.28
[.349 ±.011]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008]=E
F
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Orientation Hole
(See Note)
Position No. 1
Position No. 2
Pad
CRef.
Ø 1.94
[.077]
8.71 ±0.20
[.343 ±.008]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Housing
C±0.20
[±.008]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]5.28 ±0.03
[.208 ±.001]
Ref.
22
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
Dimensions Platings Part Numbers
No. of Solder Barbed G/B Leads
Pos. ABCDEF Tail Contact Tube
1.52 [.060] SnPb Gold 767139-1䢇
3825.40 22.81 11.43 0—2.74 [.108] PdNi 767140-1䢇
1.000 .898 .450 1.52 [.060] Pb-free Gold 5767139-1
2.74 [.108] PdNi 5767140-1
1.52 [.060] SnPb Gold 767139-2䢇
76 38.10 31.70 24.13 112.70 2.74 [.108] PdNi 767140-2䢇
1.500 1.248 .950 .500 1.52 [.060] Pb-free Gold 5767139-2
2.74 [.108] PdNi 5767140-2
1.52 [.060] SnPb Gold 767139-3䢇
114 50.80 48.21 36.83 225.40 2.74 [.108] PdNi 767140-3䢇
2.000 1.898 1.450 1.000 1.52 [.060] Pb-free Gold 5767139-3
2.74 [.108] PdNi 5767140-3
1.52 [.060] SnPb Gold 767139-4䢇
152 63.50 60.91 49.53 338.10 2.74 [.108] PdNi 767140-4䢇
2.500 2.398 1.950 1.500 1.52 [.060] Pb-free Gold 5767139-4
2.74 [.108] PdNi 5767140-4
1.52 [.060] SnPb Gold 767139-5䢇
190 76.20 73.61 62.23 450.80 2.74 [.108] PdNi 767140-5䢇
3.000 2.898 2.450 2.000 1.52 [.060] Pb-free Gold 5767139-5
2.74 [.108] PdNi 5767140-5
1.52 [.060] SnPb Gold 767139-6䢇
228 88.90 86.31 74.93 563.50 2.74 [.108] PdNi 767140-6䢇
3.500 3.398 2.950 2.500 1.52 [.060] Pb-free Gold 5767139-6
2.74 [.108] PdNi 5767140-6
1.52 [.060] SnPb Gold 767139-7䢇
266 101.60 99.01 87.63 676.20 2.74 [.108] PdNi 767140-7䢇
4.000 3.898 3.450 3.000 1.52 [.060] Pb-free Gold 5767139-7
2.74 [.108] PdNi 5767140-7
9.00 [.354]
Stacking Height (Continued)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
23
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
11.00 [.430]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*11.00 [.430] stack height when
mated to vertical receptacle;
19.94 [.785] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.72
[.343]
Max.
6.35
[.250]
0.64
[.025]
3.53
[.139]
10.79 ±0.28
[.425 ±.011]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008]=E
F
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Orientation Hole
(See Note)
Position No. 1
Position No. 2
Pad
CRef.
Ø 1.94
[.077]
10.64 ±0.20
[.419 ±.008]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Housing
C±0.20
[±.008]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]5.28 ±0.03
[.208 ±.001]
Ref.
24
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
11.00 [.430]
Stacking Height (Continued)
Part Numbers
Dimensions Platings Barbed G/B Leads Barbless G/B Leads
No. of Solder T&R T&R
Pos. ABCDE F Tail Contact Tube Vacuum Caps Tube Vacuum Caps
With Without With
1.52 [.060] SnPb Gold 767003-9䢇767123-8䢇767123-1䢇——
3825.40 22.81 11.43 0—2.64 [.104] PdNi 767087-1䢇————
1.000 .898 .450 1.52 [.060] Pb-free Gold 5767003-9䢇5767123-8䢇5767123-1䢇——
2.64 [.104] PdNi 5767087-1䢇————
1.52 [.060] SnPb Gold 1-767003-0䢇767123-9䢇767123-2䢇——
76 38.10 31.70 24.13 112.70 2.64 [.104] PdNi 767087-2䢇————
1.500 1.248 .950 .500 1.52 [.060] Pb-free Gold 1-5767003-0䢇5767123-9䢇5767123-2䢇——
2.64 [.104] PdNi 5767087-2䢇————
1.52 [.060] SnPb Gold 1-767003-1䢇1-767123-0䢇767123-3䢇1-767182-3䢇1-767183-0䢇
114 50.80 48.21 36.83 225.40 2.64 [.104] PdNi 767087-3䢇————
2.000 1.898 1.450 1.000 1.52 [.060] Pb-free Gold 1-5767003-1䢇1-5767123-0䢇5767123-3䢇1-5767182-3䢇1-5767183-0䢇
2.64 [.104] PdNi 5767087-3䢇————
1.52 [.060] SnPb Gold 767003-8䢇————
152 63.50 60.91 49.53 338.10 2.64 [.104] PdNi 767087-4䢇————
2.500 2.398 1.950 1.500 1.52 [.060] Pb-free Gold 5767003-8䢇————
2.64 [.104] PdNi 5767087-4䢇————
1.52 [(.060] SnPb Gold 1-767003-2䢇1-767123-2䢇767123-5䢇——
190 76.20 73.61 62.23 450.80 2.64 [.104] PdNi 767087-5䢇————
3.000 2.898 2.450 2.000 1.52 [.060] Pb-free Gold 1-5767003-2䢇1-5767123-2䢇5767123-5䢇——
2.64 [.104] PdNi 5767087-5䢇————
1.52 [.060] SnPb Gold 1-767003-3䢇————
228 88.90 86.31 74.93 563.50 2.64 [.104] PdNi 767087-6䢇————
3.500 3.398 2.950 2.500 1.52 [.060] Pb-free Gold 1-5767003-3䢇————
2.64 [.104] PdNi 5767087-6䢇————
1.52 [.060] SnPb Gold 1-767003-4䢇————
266 101.60 99.01 87.63 676.20 2.64 [.104] PdNi 767087-7䢇————
4.000 3.898 3.450 3.000 1.52 [.060] Pb-free Gold 1-5767003-4䢇————
2.64 [.104] PdNi 5767087-7䢇————
Note: Contact Product Engineering regarding options not present in this table.
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
25
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
12.57 [.495]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*12.57 [.495] stack height when
mated to vertical receptacle;
21.59 [.850] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Viewed from Connector Side)
Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications,
the orientation hole must be 2.00±0.03 [.079±.001].
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.72
[.343]
Max.
6.35
[.250]
0.64
[.025]
3.53
[.139]
12.45 ±0.28
[.490 ±.011]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008] = E
F
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Orientation Hole
(See Note)
Position No. 1
Position No. 2
Pad
CRef.
Ø 1.94
[.077]
12.29 ±0.20
[.484 ±.008]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Housing
C±0.20
[±.008]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]5.28 ±0.03
[.208 ±.001]
Ref.
26
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
Part Numbers
Dimensions Platings Barbed G/B Leads Barbless G/B Leads
No. of Solder T&R T&R
Pos. ABCDE F Tail Contact Tube Vacuum Caps Tube Vacuum Caps
With Without With Without
1.52 [.060] SnPb Gold 767005-8䢇767149-1䢇767149-8䢇767120-1䢇767121-1䢇767121-8䢇
3825.40 22.81 11.43 0—2.64 [.104] PdNi 767057-1䢇—.—.767082-1䢇—.—.
1.000 .898 .450 1.52 [.060] Pb-free Gold 5767005-8䢇5767149-1䢇5767149-8䢇5767120-1䢇5767121-1䢇5767121-8䢇
2.64 [.104] PdNi 5767057-1䢇—.—.5767082-1䢇—.—.
1.52 [.060] SnPb Gold 767005-9䢇767149-2䢇767149-9䢇767120-2䢇767121-2䢇767121-9䢇
76 38.10 31.70 24.13 112.70 2.64 [.104] PdNi 767057-2䢇—.—.767082-2䢇—.—.
1.500 1.248 .950 .500 1.52 [.060] Pb-free Gold 5767005-9䢇5767149-2䢇5767149-9䢇5767120-2䢇5767121-2䢇5767121-9䢇
2.64 [.104] PdNi 5767057-2䢇—.—.5767082-2䢇—.—.
1.52 [.060] SnPb Gold 1-767005-0䢇767149-3䢇1-767149-0䢇767120-3䢇767121-3䢇1-767121-0䢇
114 50.80 48.21 36.83 225.40 2.64 [.104] PdNi 767057-3䢇—.—.767082-3䢇—.—.
2.000 1.898 1.450 1.000 1.52 [.060] Pb-free Gold 1-5767005-0䢇5767149-3䢇1-5767149-0䢇5767120-3䢇5767121-3䢇1-5767121-0䢇
2.64 [.104] PdNi 5767057-3䢇—.—.5767082-3䢇—.—.
1.52 [.060] SnPb Gold 1-767005-1䢇767149-4䢇1-767149-1䢇767120-4䢇767121-4䢇1-767121-1䢇
152 63.50 60.91 49.53 338.10 2.64 [.104] PdNi 767057-4䢇—.—.767082-4䢇767127-4䢇1-767127-1䢇
2.500 2.398 1.950 1.500 1.52 [.060] Pb-free Gold 1-5767005-1䢇5767149-4䢇1-5767149-1䢇5767120-4䢇5767121-4䢇1-5767121-1䢇
2.64 [.104] PdNi 5767057-4䢇—.—.5767082-4䢇5767127-4䢇1-5767127-1䢇
1.52 [.060] SnPb Gold 1-767005-2䢇767149-5䢇1-767149-2䢇767120-5䢇—.—.
190 76.20 73.61 62.23 450.80 2.64 [.104] PdNi 767057-5䢇—.—.767082-5䢇767127-5䢇1-767121-2䢇
3.000 2.898 2.450 2.000 1.52 [.060] Pb-free Gold 1-5767005-2䢇5767149-5䢇1-5767149-2䢇5767120-5䢇—.—.
2.64 [.104] PdNi 5767057-5䢇—.—.5767082-5䢇5767127-5䢇1-5767121-2䢇
1.52 [.060] SnPb Gold 1-767005-3䢇—.—.767120-6䢇—.—.
228 88.90 86.31 74.93 563.50 2.64 [.104] PdNi 767057-6䢇—.—.767082-6䢇—.—.
3.500 3.398 2.950 2.500 1.52 [.060] Pb-free Gold 1-5767005-3䢇—.—.5767120-6䢇—.—.
2.64 [.104] PdNi 5767057-6䢇—.—.5767082-6䢇—.—.
1.52 [.060] SnPb Gold 1-767005-4䢇—.—.767120-7䢇—.—.
266 101.60 99.01 87.63 676.20 2.64 [.104] PdNi 767057-7䢇—.1-767151-4䢇767082-7䢇—.—.
4.000 3.898 3.450 3.000 1.52 [.060] Pb-free Gold 1-5767005-4䢇—.—.5767120-7䢇—.—.
2.64 [.104] PdNi 5767057-7䢇—.1-5767151-4䢇5767082-7䢇—.—.
Note: Contact Product Engineering regarding options not present in this table.
12.57 [.495]
Stacking Height (Continued)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
27
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
17.96 [.707]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*17.96 [.707] stack height when
mated to vertical receptacle;
27.00 [1.062] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
4Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
6.35
[.250]
0.64
[.025]
3.53
[.139]
14.71
[.579]
Ref.
Ground Bus
18 Spaces at
0.64 ±0.15 [.025 ±.006]
=11.43 ±0.15 [.450 ±.006]DSpaces at
12.70 ±0.15
[.500 ±.006]=E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Position No. 1
Position No. 2
Pad
CRef.
17.75 ±0.28
[.699 ±.011]
2.39 ±0.05
[.094 ±.002]
Orientation Hole
1.35
[.053]
1.32
[.052]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Extension
Housing
Plug
Housing
C±0.15
[±.006]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]
5.28 ±0.03
[.208 ±.001]
8.13
[.320]
28
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
MICTOR Vertical Plugs (Continued)
17.96 [.707]
Stacking Height (Continued)
No. of Dimensions Plating Part Numbers
Pos. ABCDE
3825.40 22.81 11.43 00.00 SnPb 767025-1䢇
1.000 .898 .450 .000 Pb-free 5767025-1
76 38.10 35.51 24.13 112.70 SnPb 767025-2䢇
1.500 1.398 .950 .500 Pb-free 5767025-2
114 50.80 48.21 36.83 225.40 SnPb 767025-3䢇
2.000 1.898 1.450 1.000 Pb-free 5767025-3
152 63.50 60.91 49.53 338.10 SnPb 767025-4䢇
2.500 2.398 1.950 1.500 Pb-free 5767025-4
190 76.20 73.61 62.23 450.80 SnPb 767025-5䢇
3.000 2.898 2.450 2.000 Pb-free 5767025-5
228 88.90 86.31 74.93 563.50 SnPb 767025-6䢇
3.500 3.398 2.950 2.500 Pb-free 5767025-6
266 101.60 99.00 87.63 676.20 SnPb 767025-7䢇
4.000 3.898 3.450 3.000 Pb-free 5767025-7
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
29
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
Page_Head (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
MICTOR Vertical Plugs (Continued)
18.75 [.738]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*18.75 [.738] stack height when
mated to vertical receptacle;
27.80 [1.093] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Connector Side of Board Shown)
No. of Dimensions Plating Part Numbers
Pos. ABCDE
38 25.40 22.81 11.43 00.00 SnPb 767042-1䢇
1.000 .898 .450 .000 Pb-free 5767042-1
76 38.10 35.51 24.13 112.70 SnPb 767042-2䢇
1.500 1.398 .950 .500 Pb-free 5767042-2
114 50.80 48.21 36.83 225.40 SnPb 767042-3䢇
2.000 1.898 1.450 1.000 Pb-free 5767042-3
152 63.50 60.91 49.53 338.10 SnPb 767042-4䢇
2.500 2.398 1.950 1.500 Pb-free 5767042-4
190 76.20 73.61 62.23 450.80 SnPb 767042-5䢇
3.000 2.898 2.450 2.000 Pb-free 5767042-5
228 88.90 86.31 74.93 563.50 SnPb 767042-6䢇
3.500 3.398 2.950 2.500 Pb-free 5767042-6
266 101.60 99.00 87.63 676.20 SnPb 767042-7䢇
4.000 3.898 3.450 3.000 Pb-free 5767042-7
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.72
[.343]
Max.
6.35
[.250]
0.64
[.025]
3.53
[.139]
15.49
[.610]
Ref.
Ground Bus
18 Spaces at
0.64 ±0.15 [.025 ±.006]
=11.43 ±0.15 [.450 ±.006]DSpaces at
12.70 ±0.15
[.500 ±.006]=E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Position No. 1
Position No. 2
Pad
CRef.
18.47 ±0.28
[.727 ±.011]
2.39 ±0.05
[.094 ±.002]
Orientation Hole
1.32
[.052]
1.45
[.057]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Extension
Housing
Plug
Housing
C±0.15
[±.006]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]
5.28 ±0.03
[.208 ±.001]
8.13
[.320]
30
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Plugs (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
20.00 [.785]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*20.02 [.788] stack height when
mated to vertical receptacle;
29.00 [1.143] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
6.35
[.250]
0.64
[.025]
3.53
[.139]
16.76
[.660]
Ref.
Ground Bus
18 Spaces at
0.64 ±0.15 [.025 ±.006]
=11.43 ±0.15 [.450 ±.006]DSpaces at
12.70 ±0.15
[.500 ±.006]=E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Position No. 1
Position No. 2
Pad
CRef.
19.81 ±0.28
[.780 ±.011]
2.39 ±0.05
[.094 ±.002]
Orientation Hole
1.35
[.053]
1.32
[.052]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Extension
Housing
Plug
Housing
C±0.15
[±.006]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]
5.28 ±0.03
[.208 ±.001]
8.13
[.320]
20.00 [.785]
Stacking Height (Continued)
31
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Plugs (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
No. of Dimensions Plating Part Numbers
Pos. ABCDE
38 25.40 22.81 11.43 00.00 SnPb 767032-1䢇
1.000 .898 .450 .000 Pb-free 5767032-1
7638.10 35.51 24.13 112.70 SnPb 767032-2䢇
1.500 1.398 .950 .500 Pb-free 5767032-2
114 50.80 48.21 36.83 225.40 SnPb 767032-3䢇
2.000 1.898 1.450 1.000 Pb-free 5767032-3
152 63.50 60.91 49.53 338.10 SnPb 767032-4䢇
2.500 2.398 1.950 1.500 Pb-free 5767032-4
190 76.20 73.61 62.23 450.80 SnPb 767032-5䢇
3.000 2.898 2.450 2.000 Pb-free 5767032-5
228 88.90 86.31 74.93 563.50 SnPb 767032-6䢇
3.500 3.398 2.950 2.500 Pb-free 5767032-6
266 101.60 99.00 87.63 676.20 SnPb 767032-7䢇
4.000 3.898 3.450 3.000 Pb-free 5767032-7
32
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Plugs (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
22.86 [.900]
Stacking Height*
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
*22.86 [.900] stack height when
mated to vertical receptacle;
31.90 [1.255] stack height when
mated to vertical receptacle
(extended height).
Recommended PC Board Layout
(Connector Side of Board Shown)
Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001].
See Application Specification 114-11004 for details.
2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics.
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
6.35
[.250]
0.64
[.025]
3.53
[.139]
19.61
[.772]
Ref.
Ground Bus
18 Spaces at
0.64 ±0.15 [.025 ±.006]
=11.43 ±0.15 [.450 ±.006]DSpaces at
12.70 ±0.15
[.500 ±.006]=E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Position No. 1
Position No. 2
Pad
CRef.
22.66 ±0.28
[.892 ±.011]
2.39 ±0.05
[.094 ±.002]
Orientation Hole
1.35
[.053]
1.32
[.052]
Ø 0.81 ±0.05
[.032 ±.002]
Hole
0.43 ±0.05
[.017 ±.002]
Contact
Extension
Housing
Plug
Housing
C±0.15
[±.006]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[]
5.28 ±0.03
[.208 ±.001]
8.13
[.320]
22.86 [.900]
Stacking Height (Continued)
33
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Plugs (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
No. of Dimensions Plating Part Numbers
Pos. ABCDE
38 25.40 22.81 11.43 00.00 SnPb 767017-1䢇
1.000 .898 .450 .000 Pb-free 5767017-1
7638.10 35.51 24.13 112.70 SnPb 767017-2䢇
1.500 1.398 .950 .500 Pb-free 5767017-2
114 50.80 48.21 36.83 225.40 SnPb 767017-3䢇
2.000 1.898 1.450 1.000 Pb-free 5767017-3
152 63.50 60.91 49.53 338.10 SnPb 767017-4䢇
2.500 2.398 1.950 1.500 Pb-free 5767017-4
190 76.20 73.61 62.23 450.80 SnPb 767017-5䢇
3.000 2.898 2.450 2.000 Pb-free 5767017-5
228 88.90 86.31 74.93 563.50 SnPb 767017-6䢇
3.500 3.398 2.950 2.500 Pb-free 5767017-6
266 101.60 99.00 87.63 676.20 SnPb 767017-7䢇
4.000 3.898 3.450 3.000 Pb-free 5767017-7
34
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Right-Angle Plugs
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Receptacles — pages 36-41
Technical Documents — page 81
Recommended PC Board Layout
(Mirror Image on Opposite Side)
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
F
4.80
[.189] 0.81
[.032]
0.64
[.025]
2.59
[.102]
3.53
[.139]
Max.
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008] = E
3.73
[.147] 1.78
[.070]
Position No. 1 Indicator
Position No. 1
This Side
Pad
CRef.
6.38 ±0.23
[.251 ±.009]
2.41 ±0.05
[.095 ±.002]
1.50 ±.018
[.059 ±.007]
0.43 ±0.05
[.017 ±.002]
Contact
Housing
C±0.20
[±.008]
A±0.20
[±.008] + 0.00
– 0.05
+ .000
– .002
B[] 5.28 ±0.03
[.208 ±.001]
Orientation Hole
Ø 1.02 ±0.05
[.040 ±.002]Hole + 0.05
– 0.02
+ .002
– .001
0.36
[.014 ]
35
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Right-Angle Plugs (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
Dimensions Platings Part Numbers
No. of Solder
Pos. ABCDEF
Tail Contact Tube
SnPb Gold 767006-1䢇
1.52 Pb-free 5767006-1
38 25.40 22.81 11.43 00.00 .060 SnPb PdNi 767055-1䢇
1.000 .898 .450 .000 Pb-free 5767055-1
2.31 SnPb PdNi 767039-1䢇
.091 Pb-free 5767039-1
SnPb Gold 767006-2䢇
1.52 Pb-free 5767006-2
.060 SnPb PdNi 767055-2䢇
7638.10 35.51 24.13 112.70 Pb-free 5767055-2
1.500 1.398 .950 .500 2.31 SnPb PdNi 767039-2䢇
.091 Pb-free 5767039-2
2.97 SnPb PdNi 767170-2䢇
.117 Pb-free 5767170-2
SnPb Gold 767006-3䢇
1.52 Pb-free 5767006-3
114 50.80 48.21 36.83 225.40 .060 SnPb PdNi 767055-3䢇
2.000 1.898 1.450 1.000 Pb-free 5767055-3
2.31 SnPb PdNi 767039-3䢇
.091 Pb-free 5767039-3
SnPb Gold 767006-4䢇
1.52 Pb-free 5767006-4
152 63.50 60.91 49.53 338.10 .060 SnPb PdNi 767055-4䢇
2.500 2.398 1.950 1.500 Pb-free 5767055-4
2.31 SnPb PdNi 767039-4䢇
.091 Pb-free 5767039-4
SnPb Gold 767006-5䢇
1.52 Pb-free 5767006-5
190 76.20 73.61 62.23 450.80 .060 SnPb PdNi 767055-5䢇
3.000 2.898 2.450 2.000 Pb-free 5767055-5
2.31 SnPb PdNi 767039-5䢇
.091 Pb-free 5767039-5
SnPb Gold 767006-6䢇
1.52 Pb-free 5767006-6
228 88.90 86.31 74.93 563.50 .060 SnPb PdNi 767055-6䢇
3.500 3.398 2.950 2.500 Pb-free 5767055-6
2.31 SnPb PdNi 767039-6䢇
.091 Pb-free 5767039-6
SnPb Gold 767006-7䢇
1.52 Pb-free 5767006-7
266 101.60 99.00 87.63 676.20 .060 SnPb PdNi 767055-7䢇
4.000 3.898 3.450 3.000 Pb-free 5767055-7
2.31 SnPb PdNi 767039-7䢇
.091 Pb-free 5767039-7
S = Printed circuit board thickness connector is intended to be used on.
36
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Receptacles
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Technical Documents — page 81
Recommended PC Board Layout
(Connector Side of Board Shown)
Note: For standard applications, orientation hole to be Ø 2.39±0.05 [.094±.002]; For slip-fit applications,
orientation hole to be Ø 2.00±0.03 [.079±.001].
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
PC Board Hold Down Required
In This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.72
[.343]
Max.
0.18
[.007]
6.43
[.253]
2.26
[.089]
6.35
[.250]
0.64
[.025]
3.53
[.139]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008] = E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Position No. 2
Position No. 1
Pad
CRef.
5.99 ±0.15
[.236 ±.006]
Orientation Hole
(See Note)
1.35 ±0.15
[.053 ±.006]
0.43 ±0.05
[.017 ±.002]
Housing
Contact
Ref.
Ø1.94
[.077] Ref.
C±0.20
[±.008]
A+ 0.08
– 0.00
+ .003
– .000
B[] 5.38 ±0.06
[.212 ±.002]
6.10 ±0.25
[.240 ±.010]
6.91
[.272]
2.74
[.108]
2.26
[.089]
2.69
[.106]
2.74
[.108]
Ø 0.81 ±0.05
[.032 ±.002]
Dia. Typ. For
Barbed Parts;
Ø 0.64 ±0.05
[.025 ±.002]
Dia. Typ. For
Barbless Parts
F±0.15
[±.006]
37
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Receptacles (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
Part Numbers
Dimensions Platings Barbed G/B Leads Barbless G/B Leads
No. of Solder T&R T&R
Pos. ABCDEF
Tail Contact Tube Vacuum Caps Tube Vacuum Caps
With Without With Without
1.40 SnPb Gold 2-767004-2䢇767096-8䢇767096-1䢇767110-1䢇767114-1䢇767114-8䢇
.055 PdNi 767181-1䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-1䢇767171-1䢇—.767081-1䢇767115-1䢇—.
3825.40 22.86 11.43 0—.108
1.000 .900 .450 1.40 Pb-free Gold 2-5767004-2䢇5767096-8䢇5767096-1䢇5767110-1䢇5767114-1䢇5767114-8䢇
.055
2.74 Pb-free Gold 5767181-1䢇—.—.—.—.—.
.108 PdNi 5767054-1䢇5767171-1䢇—.5767081-1䢇5767115-1䢇—.
1.40 SnPb Gold 2-767004-3䢇767096-9䢇767096-2䢇767110-2䢇767114-2䢇767114-9䢇
.055 PdNi 767181-2䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-2䢇—.—.767081-2䢇767115-2䢇—.
76 38.10 35.56 24.13 112.70 .108
1.500 1.400 .950 .500 1.40 Pb-free Gold 2-5767004-3䢇5767096-9䢇5767096-2䢇5767110-2䢇5767114-2䢇5767114-9䢇
.055
2.74 Pb-free Gold 5767181-2䢇—.—.—.—.—.
.108 PdNi 5767054-2䢇—.—.5767081-2䢇5767115-2䢇—.
1.40 SnPb Gold 2-767004-4䢇1-767096-0䢇767096-3䢇767110-3䢇767114-3䢇1-767114-0䢇
.055 PdNi 767181-3䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-3䢇—.—.767081-3䢇767115-3䢇—.
114 50.80 48.26 36.83 225.40 .108
2.000 1.900 1.450 1.000 1.40 Pb-free Gold 2-5767004-4䢇1-5767096-0䢇5767096-3䢇5767110-3䢇5767114-3䢇1-5767114-0䢇
.055
2.74 Pb-free Gold 5767181-3䢇—.—.—.—.—.
.108 PdNi 5767054-3䢇—.—.5767081-3䢇5767115-3䢇—.
1.40 SnPb Gold 2-767004-5䢇1-767096-1䢇767096-4䢇767110-4䢇767114-4䢇1-767114-1䢇
.055 PdNi 767181-4䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-4䢇—.—.767081-4䢇767115-4䢇—.
152 63.50 60.96 49.53 338.10 .108
2.500 2.400 1.950 1.500 1.40 Pb-free Gold 2-5767004-5䢇1-5767096-1䢇5767096-4䢇5767110-4䢇5767114-4䢇1-5767114-1䢇
.055
2.74 Pb-free Gold 5767181-4䢇—.—.—.—.—.
.108 PdNi 5767054-4䢇—.—.5767081-4䢇5767115-4䢇—.
1.40 SnPb Gold 2-767004-6䢇1-767096-2䢇767096-5䢇767110-5䢇767114-5䢇1-767114-2䢇
.055 PdNi 767181-5䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-5䢇—.—.767081-5䢇767115-5䢇—.
190 76.20 73.66 62.23 450.80 .108
3.000 2.900 2.450 2.000 1.40 Pb-free Gold 2-5767004-6䢇1-5767096-2䢇5767096-5䢇5767110-5䢇5767114-5䢇1-5767114-2䢇
.055
2.74 Pb-free Gold 5767181-5䢇—.—.—.—.—.
.108 PdNi 5767054-5䢇—.—.5767081-5䢇5767115-5䢇—.
1.40 SnPb Gold 2-767004-7䢇1-767096-3䢇—.767110-6䢇—.—.
.055 PdNi 767181-6䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-6䢇—.—.767081-6䢇—.—.
228 88.90 86.36 74.93 563.50 .108
3.500 3.400 2.950 2.500 1.40 Pb-free Gold 2-5767004-7䢇—.—.5767110-6䢇—.—.
.055
2.74 Pb-free Gold 5767181-6䢇—.—.—.—.—.
.108 PdNi 5767054-6䢇—.—.5767081-6䢇—.—.
1.40 SnPb Gold 2-767004-8䢇—.—.767110-7䢇—.—.
.055 PdNi 767181-7䢇—.—.—.—.—.
2.74 SnPb PdNi 767054-7䢇—.—.767081-7䢇—.—.
266 101.60 99.06 87.63 676.20 .108
4.000 3.900 3.450 3.000 1.40 Pb-free Gold 2-5767004-8䢇—.—.5767110-7䢇—.—.
.055
2.74 Pb-free Gold 5767181-7䢇—.—.—.—.—.
.108 PdNi 5767054-7䢇—.—.5767081-7⽧—.—.
Note: Contact Product Engineering regarding options not present in this table.
38
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Receptacles (Extended Height)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Technical Documents — page 81
4Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°PC Board Hold Down Required
in This Area For Connectors
of 190 Positions and Larger.
Size, Shape & Location at
Customer’s Discretion.
8.72
[.343]
Max.
6.35
[.250]
0.64
[.025]
3.53
[.139]
15.01 ±0.25
[.591 ±.010]
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008]=E
1.27
[.050]
Position No. 1 Indicator
Standard Ground
Bus Leads
Orientation Hole
Position No. 1
Pad
CRef.
Ø 1.94
[.077]
14.91 ±0.15
[.587 ±.006]
Ø 0.81 ±0.05
[.032 ±.002]
Dia. Typ. For
Barbed Parts;
Ø 0.64 ±0.05
[.025 ±.002]
Dia. Typ. For
Barbless Parts
0.43 ±0.05
[.017 ±.002]
Housing
Contact
A
C±0.20
[±.008]
F±0.15
[±.006]
+0.08
–0.00
+.003
–.000
B[]
8.00
[.315]
5.38 ±0.06
[.212 ±.002]
Ref.
6.91
[.272]
Recommended PC Board Layout
(Connector Side of Board Shown)
Part Numbers
Dimensions Platings Barbed G/B Leads Barbless G/B Leads
No. of Solder T&R T&R
Pos. ABCDE F Tail Contact Tube Vacuum Caps Tube Vacuum Caps
With Without With Without
1.37 [.054] Gold 767130-1䢇767146-1䢇767146-8䢇—— —
1.37 [.054] SnPb PdNi 767094-1䢇767178-1䢇767178-8䢇———
3825.40 22.86 11.43 0—2.72 [.107] 767154-1䢇—767153-8䢇767095-1䢇——
1.000 .900 .450 1.37 [.054] Gold 5767130-1䢇5767146-1䢇5767146-8䢇—— —
1.37 [.054] Pb-free PdNi 5767094-1䢇5767178-1䢇1761316-8䢇—— —
2.72 [.107] 5767154-1䢇—5767153-8䢇5767095-1䢇——
1.37 [.054] Gold 767130-2䢇767146-2䢇767146-9䢇———
1.37 [.054] SnPb PdNi 767094-2䢇767178-2䢇————
7638.10 35.56 24.13 112.70 2.72 [.107] 767154-2䢇— 767153-9䢇767095-2䢇——
1.500 1.400 .950 .500 1.37 [.054] Gold 5767130-2䢇5767146-2䢇5767146-9䢇———
1.37 [.054] Pb-free PdNi 5767094-2䢇5767178-2䢇————
2.72 [.107] 5767154-2䢇— 5767153-9䢇5767095-2䢇——
1.37 [.054] Gold 767130-3䢇767146-3䢇1-767146-0䢇———
1.37 [.054] SnPb PdNi 767094-3䢇—————
114 50.80 48.26 36.83 225.40 2.72 [.107] 767154-3䢇— 1-767153-0䢇767095-3䢇767145-3䢇1-767145-0䢇
2.000 1.900 1.450 1.000 1.37 [.054] Gold 5767130-3䢇5767146-3䢇1-5767146-0䢇—— —
1.37 [.054] Pb-free PdNi 5767094-3䢇—————
2.72 [.107] 5767154-3䢇— 1-5767153-0䢇5767095-3䢇5767145-3䢇1-5767145-0䢇
1.37 [.054] Gold 767130-4䢇767146-4䢇1-767146-1䢇—— —
1.37 [.054] SnPb PdNi 767094-4䢇—————
152 63.50 60.96 49.53 338.10 2.72 [.107] 767154-4䢇— 1-767153-1䢇767095-4䢇— 1-767145-1䢇
2.500 2.400 1.950 1.500 1.37 [.054] Gold 5767130-4䢇5767146-4⽧1-5767146-1䢇—— —
1.37 [.054] Pb-free PdNi 5767094-4䢇—————
2.72 [.107] 5767154-4䢇— 1-5767153-1䢇5767095-4䢇— 1-5767145-1䢇
1.37 [.054] Gold 767130-5䢇—————
1.37 [.054] SnPb PdNi 767094-5䢇767178-5䢇1-767178-2䢇—— —
190 76.20 73.66 62.23 450.80 2.72 [.107] 767154-5䢇— 1-767153-2䢇767095-5䢇——
3.000 2.900 2.450 2.000 1.37 [.054] Gold 5767130-5䢇—————
1.37 [.054] Pb-free PdNi 5767094-5䢇5767178-5䢇1-1761316-2䢇—— —
2.72 [.107] 5767154-5䢇— 1-5767153-2䢇5767095-5䢇——
1.37 [.054] Gold 767130-6䢇—————
1.37 [.054] SnPb PdNi 767094-6䢇—————
228 88.90 86.36 74.93 563.50 2.72 [.107] 767154-6䢇— 1-767153-3䢇767095-6䢇——
3.500 3.400 2.950 2.500 1.37 [.054] Gold 5767130-6䢇—————
1.37 [.054] Pb-free PdNi 5767094-6䢇—————
2.72 [.107] 5767154-6䢇— 1-5767153-3䢇5767095-6䢇——
1.37 [.054] Gold 767130-7䢇—————
1.37 [.054] SnPb PdNi 767094-7䢇—————
266 101.60 99.06 87.63 676.20 2.72 [.107] 767154-7䢇— 1-767153-4䢇767095-7䢇——
4.000 3.900 3.450 3.000 1.37 [.054] Gold 5767130-7䢇—————
1.37 [.054] Pb-free PdNi 5767094-7䢇—————
2.72 [.107] 5767154-7䢇— 1-5767153-4䢇5767095-7䢇——
Note: Contact Product Engineering regarding options not present in this table.
39
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Vertical Receptacles (Extended Height) (Continued)
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Note: Part Numbers are RoHS compliant except:⽧Indicates non-RoHS compliant;
䢇Indicates “5 of 6 compliant” (lead in solderable interface only).
40
Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
MICTOR
Interconnection System
MICTOR Right-Angle Receptacles
High Speed Fine Pitch Connectors
(MICTOR, MICTOR SB, Micro-Strip and STEP-Z
Interconnection Systems)
Related Product Data
Material and Finish — page 16
Performance Characteristics —
page 16
Mating Plugs — pages 19-35
Application Tooling — page 77
Technical Documents — page 81
Recommended PC Board Layout
(Mirror image on opposite side)
PC Board Thickness: 1.57 [.062]
4 Spaces at
2.54 [.100]
=10.16 [.400]
R0.13 [.005]
or
0.13 [.005] x 45°
F
4.80
[.189] 0.81
[.032]
0.64
[.025]
2.59
[.102]
3.76
[.148]
Max.
Ground Bus
18 Spaces at
0.64 ±0.20 [.025 ±.008]
=11.43 ±0.20 [.450 ±.008]DSpaces at
12.70 ±0.20
[.500 ±.008] = E
3.73
[.147] 1.78
[.070]
Position No. 1 Indicator
Position No. 1
Far Side
Pad
CRef.
5.99 ±0.15
[.236 ±.006]
2.41 ±0.05
[.095 ±.002]
1.50
[.059]
0.43 ±0.05
[.017 ±.002]
Contact
Housing
C±0.20
[±.008]
A+ 0.08
– 0.00
+ .003
– .000
B[]
5.38 ±0.05
[.212 ±.002]
6.91
[.272]
Orientation Hole
Ø 1.02 ±0.05
[.040 ±.002]Hole +0.05
–0.02
+.002
–.001
0.36
[.014 ]
