BURNDY EHV WELDED TERMINAL CONNECTOR SWAC-A-N Weld type Application: Bus to Two or Four Hole Pad (center formed) EHV RATED: UP TO 550 kV when used with Shielding Caps Material: Cast 356 Aluminum Alloy CATALOG NUMBER IPS (SCH40) EHPS (SCH80) SWAC18A-2N SWAC58A-2N SWAC18A-34N SWAC58A-34N SWAC18A-44N SWAC58A-44N SWAC19A-2N SWAC59A-2N SWAC19A-34N SWAC59A-34N SWAC19A-44N SWAC59A-44N SWAC20A-2N SWAC90A-2N SWAC20A-34N SWAC90A-34N SWAC20A-44N SWAC90A-44N SWAC21A-34N SWAC91A-34N CONDUCTOR IPS A 1 2 SWAC91A-44N SWAC22A-34N SWAC92A-34N SWAC22A-44N SWAC93A-34N SWAC24A-34N SWAC94A-34N SWAC24A-44N SWAC86A-44N 2 1 2-1/2 2.88 [73] 2 3 1 3 3.50 [89] 2 3 4.00 [102] 4 4.50 [114] 4-1/2 5.00 [127] 5 5.56 [141] 6 6.62 [168] SWAC92A-44N SWAC23A-34N 2.38 [60] 3 3-1/2 SWAC21A-44N FIG. NO. SWAC94A-44N SWAC96A-44N NOTES: 1. Dimensions in brackets [ ] are in millimeters. 2. Conductor smaller than 3 inch bus size not recommended for 550 kV. 3. DOES NOT INCLUDE SHIELDING CAPS. For EHV applications, shielding caps are required. Order separately (Type STS) shown on page 32 or ADD SUFFIX "STS" to Catalog Number (example: SWAC22A44NSTS), includes two shielding caps. 4. Pad surface finished on both sides of tongue. 5. For six hole NEMA pad contact factory. 2 3 2 3 2 2 3 3 DIMENSIONS IN / [mm] B L T 1.25 [32] 1.25 [32] 1.25 [32] 1.50 [38] 1.50 [38] 1.50 [38] 1.75 [44] 1.75 [44] 1.75 [44] 1.75 [44] 1.75 [44] 2.00 [51] 2.00 [51] 2.00 [51] 2.00 [51] 2.00 [51] 2.50 [64] 5.80 [147] 5.80 [147] 6.86 [174] 6.23 [158] 6.23 [158] 7.29 [185] 6.30 [160] 6.30 [160] 7.36 [187] 6.30 [160] 7.36 [187] 6.40 [163] 7.40 [188] 6.23 [158] 6.68 [170] 7.72 [196] 7.75 [197] .50 [13] .50 [13] .50 [13] .56 [14] .56 [14] .56 [14] .62 [16] .62 [16] .62 [16] .62 [16] .62 [16] .75 [14] .75 [19] .56 [19] .75 [19] .75 [19] 1.00 [25] H-11