UPG2417T6M-E2-A - Renesas Electronics

R09DS0010EJ0100 Rev.1.00 Page 1 of 11

Dec 24, 2010

PreliminaryData Sheet

PG2417T6M

GaAs Integrated Circuit

SP6T Switch for NFC Application

DESCRIPTION

The

PG2417T6M is a GaAs MMIC for SP6T (Single Pole Six Throw) switch for NFC (Near Field Communication)

application.

This device is housed in a 12-pin plastic TSQFN (Thin Small Quad Flat Non-leaded) (T6M) package and is suitable for

high-density surface mounting.

FEATURES

• 1, 2, 4, 8 pF capacitors on RF path are built in PKG.

• Switch control voltage : Vcont (H) = 2.85 V TYP.

: V

cont (L) = 0 V TYP.

• Low insertion loss : Lins = 0.5 dB TYP. @ f = 13.56 MHz

• High isolation : ISL = 50 dB TYP. @ f = 13.56 MHz

• Handling power : Pin (0.1 dB) = +32.0 dBm TYP. @ f = 13.56 MHz

• High-density surface mounting : 12-pin plastic TSQFN (T6M) package (2.0 × 2.0 × 0.37 mm)

APPLICATIONS

• NFC Application (FeliCaTM etc.)

ORDERING INFORMATION

Part Number Order Number Package Marking Supplying Form

PG2417T6M-E2

PG2417T6M-E2-A 12-pin plastic TSQFN

(T6M) (Pb-Free)

2417 • Embossed tape 8 mm wide

• Pin 10, 11, 12 face the perforation

side of the tape

• Qty 3 kpcs/reel

Remark To order evaluation samples, please contact your nearby sales office.

Part number for sample order:

PG2417T6M

CAUTION

Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this

device. This device must be protected at all times from ESD. Static charges may easily produce potentials of

several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard

ESD precautions must be employed at all times.

R09DS0010EJ0100

Rev.1.00

Dec 24, 2010

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 2 of 11

Dec 24, 2010

PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM

1112

2417

(Top View)

1112

RF1 RF2

GND

cont

RF3

ANT

GND

cont

1 pF 2 pF 4 pF 8 pF

(Top View)

1110

(Bottom View)

Pin No. Pin Name

1 RF1

2 GND

3 Vcont4

4 Vcont6

5 RF3

6 Vcont3

7 Vcont5

8 GND

9 RF2

10 Vcont2

11 ANT

12 Vcont1

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 3 of 11

Dec 24, 2010

SW TRUTH TABLE

RF Path

ANT-RF3

(Capacitor) ANT-RF1 ANT-RF2 Vcont1 Vcont2 Vcont3 Vcont4 Vcont5 Vcont6

OFF ON L H L L L L

ON OFF H L L L L L

OFF

ON ON H H L L L L

OFF OFF L L H L L L

OFF ON L H H L L L

ON OFF H L H L L L

1 pF

ON ON H H H L L L

OFF OFF L L L H L L

OFF ON L H L H L L

ON OFF H L L H L L

2 pF

ON ON H H L H L L

OFF OFF L L H H L L

OFF ON L H H H L L

ON OFF H L H H L L

3 pF

ON ON H H H H L L

OFF OFF L L L L H L

OFF ON L H L L H L

ON OFF H L L L H L

4 pF

ON ON H H L L H L

OFF OFF L L H L H L

OFF ON L H H L H L

ON OFF H L H L H L

5 pF

ON ON H H H L H L

OFF OFF L L L H H L

OFF ON L H L H H L

ON OFF H L L H H L

6 pF

ON ON H H L H H L

OFF OFF L L H H H L

OFF ON L H H H H L

ON OFF H L H H H L

7 pF

ON ON H H H H H L

OFF OFF L L L L L H

OFF ON L H L L L H

ON OFF H L L L L H

8 pF

ON ON H H L L L H

OFF OFF L L H L L H

OFF ON L H H L L H

ON OFF H L H L L H

9 pF

ON ON H H H L L H

OFF OFF L L L H L H

OFF ON L H L H L H

ON OFF H L L H L H

10 pF

ON ON H H L H L H

OFF OFF L L H H L H

OFF ON L H H H L H

ON OFF H L H H L H

11 pF

ON ON H H H H L H

OFF OFF L L L L H H

OFF ON L H L L H H

ON OFF H L L L H H

12 pF

ON ON H H L L H H

OFF OFF L L H L H H

OFF ON L H H L H H

ON OFF H L H L H H

13 pF

ON ON H H H L H H

OFF OFF L L L H H H

OFF ON L H L H H H

ON OFF H L L H H H

14 pF

ON ON H H L H H H

OFF OFF L L H H H H

OFF ON L H H H H H

ON OFF H L H H H H

15 pF

ON ON H H H H H H

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 4 of 11

Dec 24, 2010

ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified)

Parameter Symbol Ratings Unit

Switch Control Voltage Vcont −6.0 to +6.0 Note V

Input Power (ON Port) Pin +35.0 dBm

Operating Ambient Temperature TA −45 to +85 °C

Storage Temperature Tstg −55 to +150 °C

Note: ⎪Vcont (H) − Vcont (L)⎪ ≤ 6.0 V

RECOMMENDED OPERATING RANGE (TA = +25°C, unless otherwise specified)

Parameter Symbol MIN. TYP. MAX. Unit

Switch Control Voltage (H) Vcont (H) +2.4 +2.85 +3.4 V

Switch Control Voltage (L) Vcont (L) −0.2 0 +0.2 V

Control Voltage Difference

Vcont (H),

Vcont (L)

Note

−0.1 0 +0.1 V

Note: ⊿VCONT(H) is a difference between the maximum and the minimum control voltage among VCONT1(H), VCONT2(H),

VCONT3(H), VCONT4(H), VCONT5(H) and VCONT6(H).

⊿VCONT(L) is a difference between the maximum and the minimum control voltage among VCONT1(L), VCONT2(L),

VCONT3(L), VCONT4(L), VCONT5(L) and VCONT6(L).

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 5 of 11

Dec 24, 2010

ELECTRICAL CHARACTERISTICS

(TA = −45 to +85°C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4V, Vcont (L) = −0.2 to +0.2 V,

ZO = 50 Ω, DC blocking capacitors = 10 000 pF, unless otherwise specified)

Parameter Symbol Test Conditions MIN. TYP. MAX. Unit

Insertion Loss Lins1 ANT-RF1, Vcont1 = H, Pin = +20 dBm − 0.5 0.9 dB

ins2 ANT-RF2, Vcont2 = H, Pin = +20 dBm − 0.5 0.9 dB

ins3 ANT-RF3, Vcont3 = H, Pin = +20 dBm 36.0 38.0 40.0 dB

Lins4 ANT-RF3, Vcont4 = H, Pin = +20 dBm 31.5 33.5 35.5 dB

Lins5 ANT-RF3, Vcont5 = H, Pin = +20 dBm 26.0 28.0 30.0 dB

Lins6 ANT-RF3, Vcont6 = H, Pin = +20 dBm 20.5 22.5 24.5 dB

Isolation ISL1 ANT-RF1, Vcont2 = H, Pin = +20 dBm 32.0 50.0 − dB

ISL2 ANT-RF2, Vcont1 = H, Pin = +20 dBm 32.0 50.0 − dB

Cap 1 ANT-RF3, Vcont3 = H − 1.0 − pF

Cap 2 ANT-RF3, Vcont4 = H − 2.0 − pF

Cap 3 ANT-RF3, Vcont5 = H − 4.0 − pF

Capacitance Value

Cap 4 ANT-RF3, Vcont6 = H − 8.0 − pF

0.1 dB Loss Compression Pin (0.1 dB)

Input Power Note

ANT-RF1/RF2 28.0 32.0 − dBm

Switch Control Current Icont No RF input − 2 30

Switch Control Speed tSW 50% CTL to 90/10% RF − 1 5

Note: Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear

range.

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 6 of 11

Dec 24, 2010

EVALUATION CIRCUIT

4 5 6

12 11 10

cont

C2 C2

RF1

RF3

ANT

Note

C2 C1

Note

C1C1

RF2

Note: C1: 10 000 pF

C2: 10 000 pF

The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 7 of 11

Dec 24, 2010

TYPICAL CHARACTERISTICS

(TA = +25°C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4 V, Vcont (L) = 0 V, ZO = 50 Ω, DC

blocking capacitors = 10 000 pF)

Insertion Loss Lins (dB)

Input Power Pin (dBm)

INSERTION LOSS vs. INPUT POWER

–0.1

–0.2

–0.3

–0.4

–0.5

–0.6

–0.7

–0.8

–0.9

–1

25 35 40

Vcont (H) = 3.4 V

2.4 V

2.85 V

Remark The graph indicates nominal characteristics.

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 8 of 11

Dec 24, 2010

MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS

12-PIN PLASTIC TSQFN (T6M) (UNIT: mm)

MOUNTING PAD

SOLDER MASK

Solder thickness : 0.1 mm

0.94

0.5

1.15

0.5

1.15

0.5

1.15

0.5

1.15

0.94

12–0.23

0.770.77

0.77

0.5

0.73

1.1251.125

0.795

0.73

12–0.18

0.7950.795

1.125

0.5

Remark The mounting pad and solder mask layouts in this document are for reference only.

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 9 of 11

Dec 24, 2010

PACKAGE DIMENSIONS

12-PIN PLASTIC TSQFN (T6M) (UNIT: mm)

2.0±0.1

(Bottom View)

0.23±0.1

0.94±0.1

0.23

+0.07

–0.05

0.11 MIN.

(C 0.17) 0.50±0.06

0.37

+0.03

–0.05

Remark A > 0

( ): Reference value

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 10 of 11

Dec 24, 2010

RECOMMENDED SOLDERING CONDITIONS

This product should be soldered and mounted under the following recommended conditions. For soldering methods and

conditions other than those recommended below, contact your nearby sales office.

Soldering Method Soldering Conditions Condition Symbol

Infrared Reflow Peak temperature (package surface temperature) : 260°C or below

Time at peak temperature : 10 seconds or less

Time at temperature of 220°C or higher : 60 seconds or less

Preheating time at 120 to 180°C : 120±30 seconds

Maximum number of reflow processes : 3 times

Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below

IR260

Partial Heating Peak temperature (terminal temperature) : 350°C or below

Soldering time (per side of device) : 3 seconds or less

Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below

HS350

CAUTION

Do not use different soldering methods together (except for partial heating).

PG2417T6M

R09DS0010EJ0100 Rev.1.00 Page 11 of 11

Dec 24, 2010

Caution GaAs Products This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

All trademarks and registered trademarks are the property of their respective owners.

C - 1

Revision History

PG2417T6M Data Sheet

Description

Rev. Date

Page Summary

1.00 Dec 24, 2010 — First edition issued

FeliCa is the contactless IC card technology developed by Sony Corporation.

FeliCa is a trademark of Sony Corporation.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas

Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to

be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or

technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or

others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for

the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the

use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and

regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to

the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is

prohibited under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics

assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product

depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas

Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the

use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.

The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.

"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;

personal electronic equipment; and industrial robots.

"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically

designed for life support.

"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical

implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage

range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the

use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and

malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the

possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to

redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,

please evaluate the safety of the final products or system manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics

products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes

no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.

(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.

http://www.renesas.com

Refer to "http://www.renesas.com/" for the latest and detailed information.

Renesas Electronics America Inc.

2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A.

Tel: +1-408-588-6000, Fax: +1-408-588-6130

Renesas Electronics Canada Limited

1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada

Tel: +1-905-898-5441, Fax: +1-905-898-3220

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K

Tel: +44-1628-585-100, Fax: +44-1628-585-900

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany

Tel: +49-211-6503-0, Fax: +49-211-6503-1327

Renesas Electronics (China) Co., Ltd.

7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China

Tel: +86-10-8235-1155, Fax: +86-10-8235-7679

Renesas Electronics (Shanghai) Co., Ltd.

Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China

Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898

Renesas Electronics Hong Kong Limited

Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong

Tel: +852-2886-9318, Fax: +852 2886-9022/9044

Renesas Electronics Taiwan Co., Ltd.

7F, No. 363 Fu Shing North Road Taipei, Taiwan, R.O.C.

Tel: +886-2-8175-9600, Fax: +886 2-8175-9670

Renesas Electronics Singapore Pte. Ltd.

1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632

Tel: +65-6213-0200, Fax: +65-6278-8001

Renesas Electronics Malaysia Sdn.Bhd.

Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: +60-3-7955-9390, Fax: +60-3-7955-9510

Renesas Electronics Korea Co., Ltd.

11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea

Tel: +82-2-558-3737, Fax: +82-2-558-5141

SALES OFFICES

Colophon 1.0