PreliminaryData Sheet PG2417T6M R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 GaAs Integrated Circuit SP6T Switch for NFC Application DESCRIPTION The PG2417T6M is a GaAs MMIC for SP6T (Single Pole Six Throw) switch for NFC (Near Field Communication) application. This device is housed in a 12-pin plastic TSQFN (Thin Small Quad Flat Non-leaded) (T6M) package and is suitable for high-density surface mounting. FEATURES * 1, 2, 4, 8 pF capacitors on RF path are built in PKG. * Switch control voltage : Vcont (H) = 2.85 V TYP. : Vcont (L) = 0 V TYP. * Low insertion loss : Lins = 0.5 dB TYP. @ f = 13.56 MHz * High isolation : ISL = 50 dB TYP. @ f = 13.56 MHz * Handling power : Pin (0.1 dB) = +32.0 dBm TYP. @ f = 13.56 MHz * High-density surface mounting : 12-pin plastic TSQFN (T6M) package (2.0 x 2.0 x 0.37 mm) APPLICATIONS * NFC Application (FeliCaTM etc.) ORDERING INFORMATION Part Number PG2417T6M-E2 Order Number PG2417T6M-E2-A Package Marking 12-pin plastic TSQFN (T6M) (Pb-Free) 2417 Supplying Form * Embossed tape 8 mm wide * Pin 10, 11, 12 face the perforation side of the tape * Qty 3 kpcs/reel Remark To order evaluation samples, please contact your nearby sales office. Part number for sample order: PG2417T6M CAUTION Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 1 of 11 PG2417T6M PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 12 11 2 3 4 5 Vcont1 ANT Vcont2 12 11 10 10 2417 1 (Bottom View) (Top View) 10 11 Pin No. 12 9 RF1 1 RF2 9 9 1 8 GND 2 GND 8 8 2 7 Vcont4 3 Vcont5 7 7 3 6 R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 1 pF 2 pF 4 pF 8 pF 4 5 6 Vcont6 RF3 Vcont3 6 5 4 1 2 3 4 5 6 7 8 9 10 11 12 Pin Name RF1 GND Vcont4 Vcont6 RF3 Vcont3 Vcont5 GND RF2 Vcont2 ANT Vcont1 Page 2 of 11 PG2417T6M SW TRUTH TABLE RF Path ANT-RF3 (Capacitor) OFF 1 pF 2 pF 3 pF 4 pF 5 pF 6 pF 7 pF 8 pF 9 pF 10 pF 11 pF 12 pF 13 pF 14 pF 15 pF ANT-RF1 ANT-RF2 Vcont1 Vcont2 Vcont3 Vcont4 Vcont5 Vcont6 OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON OFF OFF ON ON ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H L L H H H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L H L L L H H H H L L L L H H H H L L L L H H H H L L L L H H H H L L L L H H H H L L L L H H H H L L L L H H H H L L L L H H H H L L L L L L L H H H H H H H H L L L L L L L L H H H H H H H H L L L L L L L L H H H H H H H H L L L L L L L L H H H H H H H H L L L L L L L L L L L L L L L H H H H H H H H H H H H H H H H L L L L L L L L L L L L L L L L H H H H H H H H H H H H H H H H L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 3 of 11 PG2417T6M ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Switch Control Voltage Input Power (ON Port) Operating Ambient Temperature Storage Temperature Note: Symbol Vcont Pin TA Tstg Ratings Unit Note -6.0 to +6.0 +35.0 -45 to +85 -55 to +150 V dBm C C Vcont (H) - Vcont (L) 6.0 V RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter Switch Control Voltage (H) Switch Control Voltage (L) Control Voltage Difference Symbol Vcont (H) Vcont (L) Vcont (H), Vcont (L) MIN. +2.4 -0.2 -0.1 TYP. +2.85 0 0 MAX. +3.4 +0.2 +0.1 Unit V V V Note Note: VCONT(H) is a difference between the maximum and the minimum control voltage among VCONT1(H), VCONT2(H), VCONT3(H), VCONT4(H), VCONT5(H) and VCONT6(H). VCONT(L) is a difference between the maximum and the minimum control voltage among VCONT1(L), VCONT2(L), VCONT3(L), VCONT4(L), VCONT5(L) and VCONT6(L). R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 4 of 11 PG2417T6M ELECTRICAL CHARACTERISTICS (TA = -45 to +85C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4V, Vcont (L) = -0.2 to +0.2 V, ZO = 50 , DC blocking capacitors = 10 000 pF, unless otherwise specified) Parameter Insertion Loss Isolation Capacitance Value 0.1 dB Loss Compression Note Input Power Switch Control Current Switch Control Speed Note: Symbol Lins1 Lins2 Lins3 Lins4 Test Conditions ANT-RF1, Vcont1 = H, Pin = +20 dBm ANT-RF2, Vcont2 = H, Pin = +20 dBm ANT-RF3, Vcont3 = H, Pin = +20 dBm ANT-RF3, Vcont4 = H, Pin = +20 dBm MIN. - - 36.0 31.5 TYP. 0.5 0.5 38.0 33.5 MAX. 0.9 0.9 40.0 35.5 Unit dB dB dB dB Lins5 ANT-RF3, Vcont5 = H, Pin = +20 dBm ANT-RF3, Vcont6 = H, Pin = +20 dBm ANT-RF1, Vcont2 = H, Pin = +20 dBm ANT-RF2, Vcont1 = H, Pin = +20 dBm 26.0 20.5 32.0 32.0 28.0 22.5 50.0 50.0 30.0 24.5 - - dB dB dB dB ANT-RF3, Vcont3 = H ANT-RF3, Vcont4 = H - - 1.0 2.0 - - pF pF Cap 3 ANT-RF3, Vcont5 = H Cap 4 Pin (0.1 dB) ANT-RF3, Vcont6 = H ANT-RF1/RF2 - - 28.0 4.0 8.0 32.0 - - - pF pF dBm - - 2 1 30 5 A s Lins6 ISL1 ISL2 Cap 1 Cap 2 Icont tSW No RF input 50% CTL to 90/10% RF Pin (0.1 dB) is the measured input power level when the insertion loss increases 0.1 dB more than that of the linear range. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 5 of 11 PG2417T6M EVALUATION CIRCUIT Vcont1 ANT C1 Note C2 12 RF1 Vcont2 11 C2 Note 10 1 Vcont4 C1 2 8 3 7 Vcont5 C2 C2 4 5 6 C2 C2 Vcont6 Note: RF2 9 C1 RF3 Vcont3 C1: 10 000 pF C2: 10 000 pF The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 6 of 11 PG2417T6M TYPICAL CHARACTERISTICS (TA = +25C, f = 13.56 MHz, Vcont (H) = +2.4 to +3.4 V, Vcont (L) = 0 V, ZO = 50 , DC blocking capacitors = 10 000 pF) INSERTION LOSS vs. INPUT POWER 0 Insertion Loss Lins (dB) -0.1 -0.2 -0.3 -0.4 -0.5 Vcont (H) = 3.4 V -0.6 -0.7 -0.8 2.4 V -0.9 -1 20 25 30 2.85 V 35 40 Input Power P in (dBm) Remark The graph indicates nominal characteristics. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 7 of 11 PG2417T6M MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS 12-PIN PLASTIC TSQFN (T6M) (UNIT: mm) MOUNTING PAD 0.77 0.5 0.94 1.15 12-0.23 1.15 0.77 1.15 0.77 0.5 0.5 1.15 0.77 0.5 0.94 SOLDER MASK 12-0.18 1.125 1.125 0.5 0.795 0.73 0.795 1.125 0.795 0.5 0.5 1.125 0.795 0.5 0.73 Solder thickness : 0.1 mm Remark The mounting pad and solder mask layouts in this document are for reference only. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 8 of 11 PG2417T6M PACKAGE DIMENSIONS 12-PIN PLASTIC TSQFN (T6M) (UNIT: mm) 0.37+0.03 -0.05 2.00.1 2.00.1 (Bottom View) 0.500.06 0.940.1 A 0.11 MIN. A 0.23+0.07 -0.05 (C 0.17) 0.230.1 0.940.1 Remark A > 0 ( ): Reference value R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 9 of 11 PG2417T6M RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Partial Heating Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below Peak temperature (terminal temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Condition Symbol IR260 HS350 CAUTION Do not use different soldering methods together (except for partial heating). R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 10 of 11 PG2417T6M Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth. R09DS0010EJ0100 Rev.1.00 Dec 24, 2010 Page 11 of 11 PG2417T6M Data Sheet Revision History Rev. 1.00 Date Dec 24, 2010 Description Summary Page -- First edition issued FeliCa is the contactless IC card technology developed by Sony Corporation. FeliCa is a trademark of Sony Corporation. All trademarks and registered trademarks are the property of their respective owners. C-1 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) (Note 2) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-6503-0, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 7F, No. 363 Fu Shing North Road Taipei, Taiwan, R.O.C. Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2010 Renesas Electronics Corporation. All rights reserved. Colophon 1.0