Winbond Clock Generator W83195WG-413 W83195CG-413 For ATI P4 Chipset Date: Feb/27/2006 Revision: 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR W83195WG-413/W83195CG-413 Data Sheet Revision History Pages Dates Version Web Version 1 n.a. 01/20/2006 0.5 n.a. All of the versions before 0.50 are for internal use. 2 8,13 02/27/2006 0.6 n.a. Modify default register value in blue text. Main Contents 3 4 5 6 7 8 9 10 Please note that all data and specifications are subject to change without notice. All the trademarks of products and companies mentioned in this data sheet belong to their respective owners. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. -I- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR TABLE OF CONTENT 1. GENERAL DESCRIPTION ......................................................................................................... 1 2. PRODUCT FEATURES .............................................................................................................. 1 3. PIN CONFIGURATION ............................................................................................................... 2 4. BLOCK DIAGRAM ...................................................................................................................... 2 5. PIN DESCRIPTION..................................................................................................................... 3 6. FREQUENCY SELECTION BY HARDWARE OR SOFTWARE ................................................ 5 7. I2C CONTROL AND STATUS REGISTERS ............................................................................... 6 7.1 Register 0: ( Default : 00h ) ......................................................................................................6 7.2 Register 1: ( Default : XXh) ......................................................................................................6 7.3 Register 2: ( Default : 03h ) ......................................................................................................7 7.4 Register 3: ( Default : 03h ) ......................................................................................................7 7.5 Register 4: ( Default : FEh) ......................................................................................................8 7.6 Register 5: ( Default : 02h ) ......................................................................................................9 7.7 Register 6: ( Default : FFh )......................................................................................................9 7.8 Register 7: Winbond Chip ID - Project Code Register ( Default : 06h )...............................10 7.9 Register 8: ( Default :D0h )..................................................................................................10 7.10 Register 9: ( Default : 7Ah )....................................................................................................11 7.11 Register 10: Reserved ( Default : 3Bh ).................................................................................11 7.12 Register 11: ( Default : 0Eh )..................................................................................................11 7.13 Register 12: ( Default : XXh ) .................................................................................................12 7.14 Register 13: ( Default : 3Fh )..................................................................................................12 7.15 Register 14: ( Default : D0h ) .................................................................................................13 7.16 Register 15: ( Default : 5Ch ) .................................................................................................13 7.17 Register 16: ( Default : 24h ) ..................................................................................................14 7.18 Register 17: Reserved ( Default : 0Fh ).................................................................................14 7.19 Register 18: Reserved ( Default : 7Ah ).................................................................................14 7.20 Register 19: ( Default : 04h ) ..................................................................................................14 7.21 Register 20: ( Default : 88h ) ..................................................................................................15 7.22 Register 21: ( Default : ECh ).................................................................................................15 Table3: SRC & ATIG Frequency Selection Table..............................................................................16 8. 9. ACCESS INTERFACE .............................................................................................................. 17 8.1 Block Write protocol ...............................................................................................................17 8.2 Block Read protocol ...............................................................................................................17 8.3 Byte Write protocol .................................................................................................................17 8.4 Byte Read protocol.................................................................................................................17 SPECIFICATIONS .................................................................................................................... 18 - II - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 9.1 ABSOLUTE MAXIMUM RATINGS .......................................................................................18 9.2 General Operating Characteristics ........................................................................................18 9.3 Skew Group timing clock........................................................................................................18 9.4 CPU 0.7V Electrical Characteristics ......................................................................................19 9.5 SRC 0.7V Electrical Characteristics ......................................................................................19 9.6 ATIG 0.7V Electrical Characteristics......................................................................................19 9.7 PCI Electrical Characteristics.................................................................................................20 9.8 USB Electrical Characteristics ...............................................................................................20 9.9 REF Electrical Characteristics ...............................................................................................20 10. ORDERING INFORMATION..................................................................................................... 21 11. HOW TO READ THE TOP MARKING...................................................................................... 21 12. PACKAGE DRAWING AND DIMENSIONS.............................................................................. 22 - III - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 1. GENERAL DESCRIPTION The W83195WG-413/W83195CG-413 is a Clock Synthesizer for ATI P4 serial chipsets. W83195WG413/ W83195CG-413 provides all clocks required for the high-speed microprocessor and provides step-less frequency programming and 32 different frequencies of CPU, PCI, and SRC clocks setting, all clocks are externally selectable with smooth transitions. The W83195WG-413/W83195CG-413 provides I2C serial bus interface to program the registers to enable or disable each clock outputs and provides programmable S.S.T. scale to reduce EMI. The W83195WG-413/W83195CG-413 accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply. 2. PRODUCT FEATURES * * * * * * * * * * * * 3 pair current-mode Differential clock outputs for CPU. 6 pair current-mode Differential clock outputs for SRC. 2 pair current-mode Differential clock outputs for ATIG programmable. 1 PCI clock output. 1 48 MHz clock output for USB. 3 14.318MHz REF clock outputs. Smooth frequency switch with selections from 100 to 400MHz. Step-less frequency programming. I2C 2-wire serial interface and support byte read/write and block read/write. Programmable S.S.T. scale to reduce EMI in M/N mode. Programmable registers to enable/disable each output and select modes. Programmable clock outputs slew rate control and skew control. * 56 pin TSSOP/SSOP package. -1- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 3. PIN CONFIGURATION XIN XOUT VDD48 USB_48 GND VTT_PG#/PD SCLK SDATA & FSC & CLKREQA# & CLKREQB# SRCT7 SRCC7 VDDSRC GND SRCT6 SRCC6 SRCT5 SRCC5 GND VDDSRC SRCT4 SRCC4 SRCT3 SRCC3 GND ATIGT1 ATIGC1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 VDDREF GND & FSA/REF0 & FSB/REF1 REF2 VDDPCI & CK410#/PCICLK0 GND *CPU_STOP# CPUT0 CPUC0 VDDCPU GND CPUT1 CPUC1 CPUT2_ITP CPUC2_ITP VDDA GNDA IREF GND VDDSRC SRCT0 SRCC0 VDDATI GND ATIGT0 ATIGC0 #: Active low *: Internal pull up resistor 120K to VDD &: Internal Pull-down resistor 120K to GND 4. BLOCK DIAGRAM 2 D ivid er A T IG L O O P 2 A TIG T 0:1 A T IG C 0:1 U SB LO O P D ivid er & Sync C PU LO O P Spread Spectrum XIN XOUT 48M H z 3 XTA L O SC R EF 0:2 3 S R C LO O P S pread Spectrum M /N /R atio ROM FS(A :C ) C R #_(A :B ) V TT_P G # C K 410# C PU _STO P # PD 3 V CO CL K D ivid er & S n yc 6 6 Latch & PO R SR C T 0,3:7 SR C C 0,3:7 P C I0 C ontrol Logic & C onfig R egister IREF SD ATA SCLK C P U T 0:2 C PU C 0:2 475 I2C Interface -2- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 5. PIN DESCRIPTION PIN PIN NAME TYPE Crystal output at 14.318MHz nominally with internal loading capacitors (18pF). 1 XIN 2 XOUT OUT 3 VDD48 PWR Power supply for USB_48 4 USB_48 OUT 5 GND PWR Ground pin 6 VTT_PG#/PD IN Notifies CK410 to sample latched input or power down mode 7 SCLK IN Serial clock of I2C 2-wire control interface. 8 SDATA I/O Serial data of I2C 2-wire control interface. 9 & IN FSC CPU frequency select 10 & IN 11 & IN 12 SRCT7 OUT 0.7V current mode differential clock output for SRC 13 SRCC7 OUT 0.7V current mode differential clock output for SRC 14 VDDSRC PWR Power supply for SRC 15 GND PWR Ground pin 16 SRCT6 OUT 0.7V current mode differential clock output for SRC 17 SRCC6 OUT 0.7V current mode differential clock output for SRC 18 SRCT5 OUT 0.7V current mode differential clock output for SRC 19 SRCC5 OUT 0.7V current mode differential clock output for SRC 20 GND PWR Ground pin 21 VDDSRC PWR Power supply for SRC 22 SRCT4 OUT 0.7V current mode differential clock output for SRC 23 SRCC4 OUT 0.7V current mode differential clock output for SRC 24 SRCT3 OUT 0.7V current mode differential clock output for SRC 25 SRCC3 OUT 0.7V current mode differential clock output for SRC 26 GND PWR Ground pin 27 ATIGT1 OUT 0.7V current mode differential clock output for ATIG 28 ATIGC1 OUT 0.7V current mode differential clock output for ATIG FSC CLKREQA# CLKREQB# IN DESCRIPTION Crystal input with internal loading capacitors (18pF) and feedback resistors. 3.3V USB 48Mhz clock output. Dynamic output control 0 = active, 1 = inactive Dynamic output control 0 = active, 1 = inactive -3- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 29 ATIGC0 OUT 0.7V current mode differential clock output for ATIG 30 ATIGT0 OUT 0.7V current mode differential clock output for ATIG 31 GND PWR Ground pin 32 VDDATIG PWR Power supply for ATIG 33 SRCC0 OUT 0.7V current mode differential clock output for SRC 34 SRCT0 OUT 0.7V current mode differential clock output for SRC 35 VDDSRC PWR Power supply for SRC 36 GND PWR Ground pin 37 IREF Deciding the reference current for the differential pairs. The OUT pin was connected to the precision resistor tied to ground to decide the appropriate current; 475 ohm is the standard value. 38 GNDA PWR Ground pin for PLL core. 39 VDDA PWR 3.3V power supply for PLL core. 40 CPUC2_ITP OUT 0.7V current mode differential clock output for CPUC2 41 CPUT2_ITP OUT 0.7V current mode differential clock output for CPUT2 42 CPUC1 OUT 0.7V current mode differential clock output for CPUC1 43 CPUT1 OUT 0.7V current mode differential clock output for CPUT1 44 GND PWR Ground pin 45 VDDCPU PWR Power supply for CPU 46 CPUC0 OUT 0.7V current mode differential clock output for CPUC0 47 CPUT0 OUT 0.7V current mode differential clock output for CPUT0 48 *CPU_STOP# 49 GND 50 & 51 VDDPCI PWR Power supply for PCI 52 REF2 OUT 53 & I/O FSB CPU frequency select/3.3V REF 14.318Mhz clock output. 54 & I/O FSA CPU frequency select/3.3V REF 14.318Mhz clock output. 55 GND PWR Ground pin 56 VDDREF PWR Power supply for REF CK410#/PCICLK0 FSB/REF1 FSA/REF0 IN Stop selected CPUCLK. PWR Ground pin I/O FS Table select latch input pin / 3.3V PCI clock output. 0 = CK410 FS Table, 1 = CK409 FS Table 3.3V REF 14.318Mhz clock output. -4- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 6. FREQUENCY SELECTION BY HARDWARE OR SOFTWARE This frequency table is used at power on latched FS [2:0] value or software programming at SSEL [4:0] (Register 0 bit 7 ~ 3). If FS [2:0] no any external circuit to modify power on status the Gray shading is Hardware default frequency. BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 FS4 FS3 FS2 FS1 FS0 0 0 0 0 0 0 0 0 0 0 CPU (MHZ) SRC (MHZ) PCI (MHZ) 0 266.68 100.00 33.33 0 1 133.34 100.00 33.33 0 1 0 200.01 100.00 33.33 0 0 1 1 166.59 111.06 33.32 0 0 1 0 0 333.17 111.06 33.32 0 0 1 0 1 100.00 100.00 33.33 0 0 1 1 0 400.01 100.00 33.33 0 0 1 1 1 200.06 100.03 33.34 0 1 0 0 0 266.68 100.00 33.33 0 1 0 0 1 133.34 100.00 33.33 0 1 0 1 0 200.01 100.00 33.33 0 1 0 1 1 166.59 111.06 33.32 0 1 1 0 0 333.17 111.06 33.32 0 1 1 0 1 100.00 100.00 33.33 0 1 1 1 0 400.01 100.00 33.33 0 1 1 1 1 200.06 100.03 33.34 1 0 0 0 0 100.00 100.00 33.33 1 0 0 0 1 133.34 100.00 33.33 1 0 0 1 0 200.01 100.00 33.33 1 0 0 1 1 166.59 111.06 33.32 1 0 1 0 0 199.90 99.95 33.32 1 0 1 0 1 266.68 100.00 33.33 1 0 1 1 0 400.01 100.00 33.33 1 0 1 1 1 333.30 111.10 33.33 1 1 0 0 0 100.00 100.00 33.33 1 1 0 0 1 133.34 100.00 33.33 1 1 0 1 0 200.01 100.00 33.33 1 1 0 1 1 166.59 111.06 33.32 1 1 1 0 0 199.90 99.95 33.32 1 1 1 0 1 266.68 100.00 33.33 1 1 1 1 0 400.01 100.00 33.33 1 1 1 1 1 333.30 111.10 33.33 -5- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 7. I2C CONTROL AND STATUS REGISTERS (The register No. is increased by 1 if use byte data read/write protocol) 7.1 Register 0: ( Default : 00h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 SSEL<4> 0 6 SSEL<3> 0 5 SSEL<2> 0 4 SSEL<1> 0 3 SSEL<0> 0 2 EN_SSEL 0 1 SPSPEN 0 0 EN_SAFE_FREQ 0 7.2 AFFECTED PIN / FUNCTION DESCRIPTION TYPE Software frequency table selection through I2C R/W Enable software table selection FS[4:0]. 0 = Hardware table setting (Jump mode). 1 = Software table setting through Bit7~3 . (Jumpless mode) Enable spread spectrum mode under clock output. 0 = Spread Spectrum mode disable 1 = Spread Spectrum mode enable After watchdog timeout 0 = Reload the hardware FS [4:0] latched pins setting. 1 = Reload the desirable frequency table selection defined at Reg-5 Bit 4~0. R/W R/W R/W Register 1: ( Default : XXh) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 CPUEN<2> 1 6 CPUEN<1> 1 5 CPUEN<0> 1 4 CK410_N_BACK X FUNCTION DESCRIPTION CPUT/C_ITP output control 1: Enable 0: Disable CPUCLKT1/C1 output control 1: Enable 0: Disable CPUCLKT0/C0 output control 1: Enable 0: Disable Power on latched value of FS4 pin. Default : 0 -6- TYPE R/W R/W R/W R Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 3 Reserved X Reserved R 2 FS2_BACK X Power on latched value of FS2 pin. Default : 0 R 1 FS1_BACK X Power on latched value of FS1 pin. Default : 0 R 0 FS0_BACK X Power on latched value of FS0 pin. Default : 0 R 7.3 Register 2: ( Default : 03h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION SRCCLK7 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable TYPE 7 CLREQA7#_Ctr 0 6 CLREQA6#_Ctr 0 5 CLREQA5#_Ctr 0 4 CLREQA4#_Ctr 0 3 CLREQA3#_Ctr 0 2 CLREQA0#_Ctr 0 1 Reserved 1 Reserved R/W 0 Reserved 1 Reserved R/W 7.4 SRCCLK6 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable SRCCLK5 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable SRCCLK4 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable SRCCLK3 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable SRCCLK0 is controlled by the CLREQA# pin 1: Controllable 0: Uncontrollable R/W R/W R/W R/W R/W R/W Register 3: ( Default : 03h ) BIT 7 6 AFFECTED PIN/ FUNCTION NAME(S) CLREQB7#_Ctr CLREQB6#_Ctr PWD FUNCTION DESCRIPTION TYPE 0 SRCCLK7 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable R/W 0 SRCCLK6 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable R/W -7- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 5 CLREQB5#_Ctr 0 4 CLREQB4#_Ctr 0 3 CLREQB3#_Ctr 0 2 CLREQB0#_Ctr 0 1 PCIEN 1 0 Reserved 1 7.5 SRCCLK5 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable SRCCLK4 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable SRCCLK3 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable SRCCLK0 is controlled by the CLREQB# pin 1: Controllable 0: Uncontrollable PCI0 output control 1: Enable 0: Disable Reserved R/W R/W R/W R/W R/W R/W Register 4: ( Default : FEh) BIT 7 AFFECTED PIN/ FUNCTION NAME(S) CPU2S_EN PWD FUNCTION DESCRIPTION TYPE 1 CPU_STOP# pin control. 1: Enable CPUCLK2 stop feature 0: Disable stop feature R/W R/W 6 CPU1S_EN 1 CPU_STOP# pin control. 1: Enable CPUCLK1 stop feature 0: Disable stop feature 5 CPU0S_EN 1 CPU_STOP# pin control. 1: Enable CPUCLK0 stop feature 0: Disable stop feature R/W R/W 4 REFEN<2> 1 PREF2 output control 1: Enable 0: Disable 3 REFEN<1> 1 PREF1 output control 1: Enable 0: Disable R/W R/W R/W 2 REFEN<0> 1 PREF0 output control 1: Enable 0: Disable 1 F48EN 1 PUSB48 output control -8- Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 1: Enable 0: Disable 0 7.6 Reserved 0 Reserved R/W Register 5: ( Default : 02h ) BIT 7 6 AFFECTED PIN/ FUNCTION NAME(S) Reserved CNT_EN PWD TYPE 0 Reserved R/W 0 Program this bit => 1 : Enable Watchdog Timer feature. 0 : Disable Watchdog Timer feature. Enable WD sequence => Program this bit to 1 firstly, then program the Reg-20 to start the counting Read-back this bit => During timer count down the bit read back to 1. If count to zero, this bit read back to 0. R/W Read Back only. Timeout Flag. 1 : Watchdog has ever started and count to zero. 0 : a.) Watchdog is restarted and counting. b.) Power on default state R These bits will be reloaded in Reg-0 to select frequency table. As the watchdog is timeout and EN_SAFE_FREQ=1. R/W FUNCTION DESCRIPTION TYPE 0 5 WD_TIMEOUT 4 SAF_FREQ<4> 0 3 SAF_FREQ<3> 0 2 SAF_FREQ<2> 0 1 SAF_FREQ<1> 1 0 SAF_FREQ<0> 0 7.7 FUNCTION DESCRIPTION Register 6: ( Default : FFh ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 SRCEN<7> 1 6 SRCEN<6> 1 5 SRCEN<5> 1 SRC7 output control 1: Enable 0: Disable SRC6 output control 1: Enable 0: Disable SRC5 output control 1: Enable -9- R/W R/W R/W Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 0: Disable 4 SRCEN<4> 1 SRC4 output control 1: Enable 0: Disable R/W 3 SRCEN<3> 1 SRC3 output control 1: Enable 0: Disable R/W 1 ATIG1 output control 1: Enable 0: Disable ATI clock can't be controlled by CLKREQ# pins R/W R/W R/W 2 ATIGEN<1> 1 ATIGEN<0> 1 ATIG0 output control 1: Enable 0: Disable ATI clock can't be controlled by CLKREQ# pins 0 SRCEN<0> 1 SRC0 output control 1: Enable 0: Disable 7.8 Register 7: Winbond Chip ID - Project Code Register ( Default : 06h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION TYPE 7 CHIP_ID [7] 0 Winbond Chip ID.W83195CG/W-413 (BA5A06). R 6 CHIP_ID [6] 0 Winbond Chip ID. R 5 CHIP_ID [5] 0 Winbond Chip ID. R 4 CHIP_ID [4] 0 Winbond Chip ID. R 3 CHIP_ID [3] 0 Winbond Chip ID. R 2 CHIP_ID [2] 1 Winbond Chip ID. R 1 CHIP_ID [1] 1 Winbond Chip ID. R 0 CHIP_ID [0] 0 Winbond Chip ID. R 7.9 Register 8: ( Default :D0h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION TYPE 7 NVAL<8> 1 Programmable N divisor value. Bit 7 ~0 are defined in the Register 9. R/W 6 NVAL<9> 1 Programmable N divisor value. Bit 7 ~0 are defined in the Register 9. R/W 5 MVAL<5> 0 Programmable M divisor R/W 4 MVAL<4> 1 - 10 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 3 MVAL<3> 0 2 MVAL<2> 0 1 MVAL<1> 0 0 MVAL<0> 0 7.10 Register 9: ( Default : 7Ah ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 NVAL<7> 0 6 NVAL<6> 1 5 NVAL<5> 1 4 NVAL<4> 1 3 NVAL<3> 1 2 NVAL<2> 0 1 NVAL<1> 1 0 NVAL<0> 0 FUNCTION DESCRIPTION TYPE Programmable N divisor bit 7 ~0. The bit 8,9 is defined in Register 8. R/W Default value follow FS=0 7.11 Register 10: Reserved ( Default : 3Bh ) 7.12 Register 11: ( Default : 0Eh ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 SPH VAL<3> 0 6 SPH VAL<2> 0 5 SPH VAL<1> 0 4 SPH VAL<0> 0 3 SPL VAL<3> 1 2 SPL VAL<2> 1 1 SPL VAL<1> 1 0 SPL VAL<0> 0 FUNCTION DESCRIPTION TYPE Spread Spectrum Up Counter bit 3 ~ bit 0. Spread Spectrum Down Counter bit 3 ~ bit 0 R/W 2's complement representation. Ex: 1 -> 1111 ; 2 -> 1110 ; 7 -> 1001 ; 8 -> 1000 - 11 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 7.13 Register 12: ( Default : XXh ) AFFECTED PIN/ FUNCTION NAME(S) BIT PWD FUNCTION DESCRIPTION TYPE 7 Reserved 0 Reserved R/W 6 KVAL<9> X Define the PCI divider ratio Table-2 integrate the all divider configuration R/W 5 KVAL<5> X 4 KVAL<4> X Define the SRC divider ratio Refer to Table-2 R/W 3 KVAL<3> X 2 KVAL<2> X 1 KVAL<1> X 0 KVAL<0> X Define the CPU divider ratio Refer to Table-2 R/W Table-2 CPU, SRC, PCI divider ratio selection Table LSB MSB Bit2/ PCI SRC CPU Bit5 Bit3 Bit1,0 0 1 0 1 00 01 10 11 0 Reserved Div20 Reserved Div6 Div2 Div3 Div4 Div6 1 Div24 Div30 Div8 Div10 Div8 Div8 Div8 Div8 Bit4/ Bit9 7.14 Register 13: ( Default : 3Fh ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION TYPE 7 EN_MN_PROG 0 0: Output frequency depend on frequency table 1: Program all clock frequency by changing M/N value The equation is VCO =14.318MHz*(N+4)/ M. Once the watchdog timer timeout, the bit will be clear. Then the frequency will be decided by hardware default FS<4:0> or desired frequency select SAF_FREQ[4:0] depend on EN_SAFE_FREQ (Reg0 - bit0). 6 Reserved 0 Reserved R/W 5 Reserved 1 4 Reserved 1 Reserved R/W - 12 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 3 IVAL<3> 1 2 IVAL<2> 1 1 IVAL<1> 1 0 IVAL<0> 1 Charge pump current selection R/W 7.15 Register 14: ( Default : D0h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION TYPE 7 Reserved 1 Reserved R/W 6 Reserved 1 Reserved R/W 5 SPCNT<5> 0 4 SPCNT<4> 1 3 SPCNT<3> 0 SPCNT<2> 0 Spread Spectrum Programmable time, the resolution is 280ns. Default period is 11.8us R/W 2 1 SPCNT<1> 0 0 SPCNT<0> 0 7.16 Register 15: ( Default : 5Ch ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD FUNCTION DESCRIPTION TYPE 7 INV_CPU 0 Invert the CPUCLKT2/1/0 phase 0: Default 1: Inverse R/W 6 Reserved 1 Reserved R/W R/W 5 DRI_CONT 0 CPUT/ SRCT/ ATIG output state in during POWER DOWN assertion. 1: Driven (2*Iref) 0: Tristate (Floating) CPUT/ SRCT/ ATIG output state in during STOP Mode assertion. 1: Driven (6*Iref) 0: Tristate (Floating) Complementary parts always tri-state (floating) in power down or stop mode. 4 Reserved 1 Reserved R/W 3 Reserved 1 2 Reserved 1 Reserved R/W - 13 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 1 Reserved 0 0 Reserved 0 7.17 Register 16: ( Default : 24h ) BIT 7 AFFECTED PIN/ FUNCTION NAME(S) INV_SRC PWD FUNCTION DESCRIPTION TYPE 0 Invert the SRC phase 0: Default 1: Inverse R/W Invert the HTT & PCI phase 0: Default 1: Inverse R/W CPUCLKT1 to CPUCLKT0 skew control Skew resolution is 300ps The decision of skew direction is same as CSKEW<2:0> setting R/W CPU1 to PCI skew control Skew resolution is 300ps The decision of skew direction is same as PSKEW<2:0> setting R/W 6 INV_PCI 0 5 CSKEW<2> 1 4 CSKEW<1> 0 3 CSKEW<0> 0 2 PSKEW<2> 1 1 PSKEW<1> 0 0 PSKEW<0> 0 7.18 Register 17: Reserved ( Default : 0Fh ) 7.19 Register 18: Reserved ( Default : 7Ah ) 7.20 Register 19: ( Default : 04h ) BIT 7 AFFECTED PIN/ FUNCTION NAME(S) SRC_FS<4> PWD FUNCTION DESCRIPTION 0 6 SRC_FS<3> 0 5 SRC_FS<2> 0 4 SRC_FS<1> 0 3 SRC_FS<0> 0 2 CENTERSKEW<2> 1 1 CENTERSKEW<1> 0 0 CENTERSKEW<0> 0 TYPE R/W SRC frequency table. See Table-3. R/W SRC_FS<4> also is spread spectrum enable bit. R/W CPU1 center skew control Skew resolution is 300ps The decision of skew direction is same as CENTERSKEW<2:0> setting R/W - 14 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 7.21 Register 20: ( Default : 88h ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 Reserved 1 6 SEC<6> 0 5 SEC<5> 0 4 SEC<4> 0 3 SEC<3> 1 2 SEC<2> 0 1 SEC<1> 0 0 SEC<0> 0 FUNCTION DESCRIPTION TYPE Reserved R/W Setting the down count depth (Failure decision). One bit resolution represent 250ms. Default time depth is 8*250ms = 2.0 second. If the watchdog timer is counting, this register will return present down count value. R/W FUNCTION DESCRIPTION TYPE 7.22 Register 21: ( Default : ECh ) BIT AFFECTED PIN/ FUNCTION NAME(S) PWD 7 Reserved 1 Reserved R/W 6 CPU2SRC_SYNC 1 5 CPU2PCI_SYNC 1 4 Reserved 0 Reserved R/W 3 Reserved 1 Reserved R/W 2 SRCSKEW<2> 1 R/W 1 SRCSKEW<1> 0 0 SRCSKEW<0> 0 CPU1 to SRC skew control Skew resolution is 300ps The decision of skew direction is same as SRCSKEW<2:0> setting CPU align with SRC 1 : Enable 0 : Disable CPU align with PCI 1 : Enable 0 : Disable - 15 - R/W R/W R/W Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR Table3: SRC & ATIG Frequency Selection Table BIT 7 BIT 6 BIT 5 BIT 4 BIT 3 SRC,ATIG FS4 FS3 FS2 FS1 FS0 (MHZ) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 100.00 100.00 100.00 100.00 101.00 101.00 101.00 101.00 102.00 102.00 102.00 102.00 104.00 104.00 104.00 104.00 100.00 100.00 100.00 100.00 101.00 101.00 101.00 101.00 102.00 102.00 102.00 102.00 104.00 104.00 104.00 104.00 - 16 - SPREAD(%) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 -0.5 Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 8. ACCESS INTERFACE The W83195BR-413 provides I2C Serial Bus for microprocessor to read/write internal registers. In the W83195BR-413 is provided Block Read/Block Write and Byte-Data Read/Write protocol. The I2C address is defined at 0xD2. The register number is increased by one if using byte data read/write protocol. Example: In block mode, byte number of program register is 1 In byte mode, byte number of program register is 2 (Byte number of block mode +1) 8.1 Block Write protocol 8.2 Block Read protocol ## In block mode, the command code must filled 8'h00 8.3 Byte Write protocol 8.4 Byte Read protocol - 17 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 9. SPECIFICATIONS 9.1 ABSOLUTE MAXIMUM RATINGS Stresses greater than those listed in this table may cause permanent damage to the device. Precautions should be taken to avoid application of any voltage higher than the maximum rated voltages to this circuit. Subjection to maximum conditions for extended periods may affect reliability. Unused inputs must always be tied to an appropriate logic voltage level (Ground or VDD). 9.2 Parameter Rating Absolute 3.3V Core Supply Voltage -0.5V to +4.6V Absolute 3.3V I/O Supple Voltage - 0.5V to + 4.6V Operating 3.3V Core Supply Voltage 3.135V to 3.465V Operating 3.3V I/O Supple Voltage 3.135V to 3.465V Storage Temperature - 65C to + 150C Ambient Temperature - 55C to + 125C Operating Temperature 0C to + 70C Input ESD protection (Human body model) 2000V General Operating Characteristics VDD= 3.3V 5 %, TA = 0C to +70C, Parameter Symbol Input Low Voltage VIL Input High Voltage VIH Output Low Voltage VOL Output High Voltage VOH Min Max Units 0.8 Vdc 2.0 Vdc 0.4 Vdc 2.4 Vdc Operating Supply Current Idd 350 mA Input pin capacitance Cin 5 pF Cout 6 pF Lin 7 nH Output pin capacitance Input pin inductance 9.3 Test Conditions CPU = 100 to 400 MHz PCI = 33.3 Mhz with load 10pF Skew Group timing clock VDD = 3.3V 5 %, TA = 0C to +70C, Cl=10pF Parameter Min Max Units CPU pair to CPU pair Skew 100 ps Measure Crossing point PCIE pair to PCIE pair Skew 100 ps Measure Crossing point PCI to PCI Skew 250 ps Measured at 1.5V 48MHz to 48MHz Skew 1000 ps Measured at 1.5V - 18 - Test Conditions Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 9.4 CPU 0.7V Electrical Characteristics VDDC= 3.3V 5 %, TA = 0C to +70C, Test load Rs=33, Rp=49.9 Cl=2pF, Vol=0.175V, Voh=0.525V, Vr=475, IREF=2.32mA, Ioh=6*IREF Parameter Min Max Units Rise Time 175 700 ps Measure Single Ended waveform Fall Time 175 700 ps Measure Single Ended waveform Absolute crossing point Voltages 250 550 mV Measure Single Ended waveform Voltage High 660 850 mV Measure Single Ended waveform Voltage Low -150 mV Measure Single Ended waveform 100 ps Measure Differential waveform 55 % Measure Differential waveform Cycle to Cycle jitter Duty Cycle 9.5 45 Test Conditions SRC 0.7V Electrical Characteristics VDDS= 3.3V 5 %, TA = 0C to +70C, Test load Rs=33, Rp=49.9 Cl=2pF, Vol=0.175V, Voh=0.525V, Vr=475, IREF=2.32mA, Ioh=6*IREF Parameter Min Max Units Rise Time 175 700 ps Measure Single Ended waveform Fall Time 175 700 ps Measure Single Ended waveform Absolute crossing point Voltages 250 550 mV Measure Single Ended waveform Voltage High 660 850 mV Measure Single Ended waveform Voltage Low -150 mV Measure Single Ended waveform 100 ps Measure Differential waveform 55 % Measure Differential waveform Cycle to Cycle jitter Duty Cycle 9.6 45 Test Conditions ATIG 0.7V Electrical Characteristics VDDATIG= 3.3V 5 %, TA = 0C to +70C, Test load Rs=33, Rp=49.9 Cl=2pF, Vol=0.175V, Voh=0.525V, Vr=475, IREF=2.32mA, Ioh=6*IREF Parameter Min Max Units Rise Time 175 700 ps Measure Single Ended waveform Fall Time 175 700 ps Measure Single Ended waveform Absolute crossing point Voltages 250 550 mV Measure Single Ended waveform Voltage High 660 850 mV Measure Single Ended waveform Voltage Low -150 mV Measure Single Ended waveform 100 ps Measure Differential waveform 55 % Measure Differential waveform Cycle to Cycle jitter Duty Cycle 45 - 19 - Test Conditions Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 9.7 PCI Electrical Characteristics VDDP= 3.3V 5 %, TA = 0C to +70C, Test load, Cl=10pF, Parameter Min Max Units Rise Time 500 2000 ps Vol=0.4V, Voh=2.4V Fall Time 500 2000 ps Voh=2.4V, Vol=0.4V 250 ps Measured at 1.5V 55 % Measured at 1.5V Cycle to Cycle jitter Duty Cycle 45 Pull-Up Current Min -33 Pull-Up Current Max Pull-Down Current Min -33 30 Pull-Down Current Max 9.8 38 Test Conditions mA Vout=1.0V mA Vout=3.135V mA Vout=1.95V mA Vout=0.4V USB Electrical Characteristics VDD48= 3.3V 5 %, TA = 0C to +70C, Test load, Cl=10pF, Parameter Min Max Units Rise Time 500 2000 ps Vol=0.4V, Voh=2.4V Fall Time 500 2000 ps Voh=2.4V, Vol=0.4V 300 ps Measured at 1.5V 55 % Measured at 1.5V Long term jitter Duty Cycle 45 Pull-Up Current Min -29 Pull-Up Current Max Pull-Down Current Min -23 29 Pull-Down Current Max 9.9 27 Test Conditions mA Vout=1.0V mA Vout=3.135V mA Vout=1.95V mA Vout=0.4V REF Electrical Characteristics VDDR= 3.3V 5 %, TA = 0C to +70C, Test load, Cl=10pF, Parameter Min Max Units Rise Time 500 2000 ps Vol=0.4V, Voh=2.4V Fall Time 500 2000 ps Voh=2.4V, Vol=0.4V 700 ps Measured at 1.5V 55 % Measured at 1.5V Cycle to Cycle jitter Duty Cycle 45 Pull-Up Current Min -33 Pull-Up Current Max Pull-Down Current Min Pull-Down Current Max -33 30 38 - 20 - Test Conditions mA Vout=1.0V mA Vout=3.135V mA Vout=1.95V mA Vout=0.4V Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 10. ORDERING INFORMATION Part Number Package Type Production Flow W83195WG-413 56 PIN TSSOP Commercial, 0C to +70C W83195CG-413 56 PIN SSOP Commercial, 0C to +70C 11. HOW TO READ THE TOP MARKING W83195WG-413 28051234 604LBABA W83195CG-413 28051234 604GBABA 1st line: Winbond logo and the type number: W83195WG-413/W83195CG-413 2nd line: Tracking code 2 8051234 2: wafers manufactured in Winbond FAB 2 8051234: wafer production series lot number 3rd line: Tracking code 604 L A A BA 604: packages made in '2006, week 04 L: assembly house ID; O means OSE, G means GR , L means Lingsen. A: Internal use code A: IC revision BA: mask version All the trademarks of products and companies mentioned in this data sheet belong to their respective owners. - 21 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR 12. PACKAGE DRAWING AND DIMENSIONS 56 PIN TSSOP-240mil 56 PIN SSOP-300mil .035 .045 DIMENSION IN MM SYMBOL .045 .055 0.40/0.50 DIA E END VIEW HE TOP VIEW SEE DETAIL "A" c D A2 A A1 e b SIDE VIEW c 0.13 D HE 18.2 18.42 18.54 910.16 10.31 10.41 E 7.42 0.51 7.52 0.64 7.59 0.76 0.61 0.81 1.40 1.02 e L L1 Y SEATING PLANE A A1 A2 b PARTING LINE Y c DIMENSION IN INCH MIN. NOM MAX. MIN. NOM 0.095 0.101 2.41 2.57 2.79 0.41 0.008 0.012 0.20 0.30 0.088 0.090 2.34 2.24 2.29 0.25 0.20 0.34 0.008 0.010 0 0.25 0.08 8 0.005 0.720 0.400 0.292 0.020 0.024 MAX. 0.110 0.016 0.092 0.0135 0.010 0.725 0.730 0.406 0.410 0.296 0.299 0.025 0.030 0.032 0.040 0.055 0.003 0 8 L L1 DETAIL"A" - 22 - Publication Release Date: Feb 2006 Revision 0.6 W83195WG-413/W83195CG-413 STEPLESS FOR ATI P4 CLOCK GENERATOR Important Notice Winbond products are not designed, intended, authorized or warranted for use as components in systems or equipment intended for surgical implantation, atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, or for other applications intended to support or sustain life. Further more, Winbond products are not intended for applications wherein failure of Winbond products could result or lead to a situation wherein personal injury, death or severe property or environmental damage could occur. Winbond customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Winbond for any damages resulting from such improper use or sales. Headquarters Winbond Electronics Corporation America Winbond Electronics (Shanghai) Ltd No. 4, Creation Rd. III, Science-Based Industrial Park, Hsinchu, Taiwan TEL: 886-3-5770066 FAX: 886-3-5665577 http://www.winbond.com.tw/ 2727 North First Street, San Jose, CA 95134, U.S.A. TEL: 1-408-9436666 FAX: 1-408-5441798 27F, 2299 Yan An W. Rd. Shanghai, 200336 China TEL: 86-21-62365999 FAX: 86-21-62365998 Taipei Office Winbond Electronics Corporation Japan Winbond Electronics (H.K.) Ltd. 9F, No.480, Rueiguang Rd., Neihu District, Taipei, 114, Taiwan, R.O.C. TEL: 886-2-8177-7168 FAX: 886-2-8751-3579 7F Daini-ueno BLDG, 3-7-18 Shinyokohama Kohoku-ku, Yokohama, 222-0033 TEL: 81-45-4781881 FAX: 81-45-4781800 Unit 9-15, 22F, Millennium City, No. 378 Kwun Tong Rd., Kowloon, Hong Kong TEL: 852-27513100 FAX: 852-27552064 Please note that all data and specifications are subject to change without notice. All the trade marks of products and companies mentioned in this data sheet belong to their respective owners. - 23 - Publication Release Date: Feb 2006 Revision 0.6