BANNER } EZ-LIGHT TL50 High Brightness Tower Light Multi-Color General-Purpose or Audible Indicators more sensors, more solutions Similar in design and construction to standard TL50 Tower Lights, but more than 4 times brighter, im- proving visibility in areas with high levels of ambient light. * Rugged, cost-effective, and easy-to-install multi-segment indicators * Illuminated segments provide easy-to-see operator guidance and indication of equipment status Displays up to 5 colors * Available in black or light gray housing * Audible models available with standard, sealed, or omni-directional audible element * Compact devices are completely self-contained - no controller needed i Standard Audible Sealed Audible Omni-Directional Standard Sealed Audible * 18 to 30V de or 24V ac operation * No assembly required Audible Models Standard Audible Models* "coe. LED Function? Connection? Inputs TL50HRAQ 1 Red 4-pin Euro integral QD connector | pimodal TL50HGRAQ 2 Green, Red (NPN TL50HGYRAQ 3 Green, Yellow, Red 5-pin Euro integral QD connector PNP) TL50HBGYRAQ 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Sealed Audible Models" * ee. LED Function? Connection? Inputs Continuous Pulsed at 1.6 Hz Staccato oor TL50HRALSQ TL50HRALS3Q TL50HRALS4Q 1 Red 4-pin Euro integral QD connector | pimodal TL50HGRALSQ TL50HGRALS3Q TL50HGRALS4Q 2 Green, Red (NPN TL5OHGYRALSQ TL50HGYRALS3Q TL5OHGYRALS4Q 3 Green, Yellow, Red 5-pin Euro integral QD connector PNP) TL5OHBGYRALSQ | TL50HBGYRALS3Q | TLSOHBGYRALS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Omni-Directional Sealed Audible Models (sound exits at 45)" #of LED Col LED Function? Connection? Inputs Continuous Pulsed at 1.6 Hz Staccato ocr TL50HRAOSQ TL50HRAOS3Q TL50HRAOS4Q 1 Red 4-pin Euro integral QD connector | pimodal TL50HGRAOSQ TL50HGRAOS3Q TL50HGRAOS4Q 2 Green, Red (NPN TL50HGYRAOSQ | TL5OHGYRAOS3Q_| TL50HGYRAOS4Q 3 Green, Yellow, Red 5-pin Euro integral QD connector PNP) TL5SOHBGYRAOSQ | TL50OHBGYRAOS3Q | TLSOHBGYRAOS4Q 4 Blue, Green, Yellow, Red 8-pin Euro integral QD connector Ea NOTE: Non-Audible Models are listed on the next page. 1 Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD models), for example, TL50HRC or TL50HRCQ. 2 The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations 3 Integral QD models only are listed; mating cordset required (see Cordsets on page 4). + For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TLSOHRQP. * For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TLS0HR. P/N 152837_web Rev. H 3/26/2013EZ-LIGHT TL50 High Brightness Tower Light Non-Audible Models Model* # of LED Colors LED Function Connection Inputs TL50HRQ 1 Red TL50HGRQ 2 Green, Red 4-pin Euro integral QD connector TL50OHGYRQ 3 Green, Yellow, Red Bimodal (NPN or PNP) TL50HBGYRQ 4 Blue, Green, Yellow, Red 5-pin Euro integral QD connector TL50HWBGYRQ 5 White, Blue, Green, Yellow, Red 8-pin Euro integral QD connector Specifications Supply Voltage and Current 18 to 30V de (10% max. ripple); or 21 to 27V ac Indicators - max. current per LED color: ~ at 18V de: 100 mA at 30V de: 60 mA at 21V ac: 80 mA at 27V ac: 70 mA Standard Audible Alarm: 25 mA max. current Sealed Audible Alarm: 35 mA max. current Omni-Directional Sealed Audible Alarm: 45 mA max. current Indicators 1 to 5 colors; Green, Red, Yellow, Blue, White; LEDs are independently selected Supply Protection Circuitry: Protected against reverse polarity and transient voltages Input Response Time Indicator ON/OFF: 10 ms (max.) Audible Adjustment Standard Audible Alarm: Unscrew the cover (up to 1.5 turns max.) to adjust the audible intensity. (Do not exceed 1.5 turns or the cover may detach during operation.) For max. intensity, rotate the center plug 180 counterclockwise to remove it. Sealed Audible Alarm: Rotate the front cover until the desired in- tensity is reached. Omni-Directional Sealed Audible Alarm: No adjustment. Vibration and Mechanical Shock: All models meet Mil. Std. 202F requirements method 201A (vibra- tion: 10 to 60 Hz max., double amplitude 0.06 in, maximum acceler- ation 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half sine Connections Integral 4-pin, 5-pin, or 8-pin M12/Euro-style QD, 150 mm (5.9 in) PVC pigtail with QD, or 2 m (6.5 ff) integral cable, depending on model Operating Conditions: Non-Audible:-40 to +50 C (-40 to +122 F) Standard and Sealed Audible: -20 to +50 C (-4 to +122 F) Max. Rel. Humidity: 95% at 50 C (non-condensing) Audible Alarm Audible measurements are made in the direction sound exits the device. For standard audible models, this is the top of the unit (when mounted vertically, sound is directed toward the ceiling). For sealed audible models, sound exits the vented openings in the side of the unit, which should be oriented so that the sound is directed toward the machine operator(s). In environments with high ambient noise levels or high ceilings that absorb sound, the sealed or omni-directional models are recommended. Standard Audible Alarm: 2.7 KHz + 500 Hz oscillation frequency; max. in- tensity 92 db at 1 m (3.3 ft) (typical) Sealed Audible Alarm: 2.9 KHz + 250 Hz oscillation frequency; max. intensi- ty 94 db at 1 m (3.3 ft) (typical) Omni-Directional Sealed Audible Alarm: 2.1 KHz + 250 Hz oscillation fre- quency; max intensity 99 db at 1m (3.3 ft) (typical) Construction: Bases and Covers: ABS Light Segment: Polycarbonate Environmental Rating Non-Audible and Sealed Audibles: IEC IP67 Standard Audible:|EC IP50 Certifications wave. C USTED Omni-Directional models: pending be # of Tower Height (H) Col- Ca . RO "| Omni-Directional ors Non-Audible Standard Audible Sealed Audible Sealed Audible 1 61.2 mm (2.4 in) 92.0 mm (3.6 in) 115.1 mm (4.5 in) 129.1 mm (5.1 in) 2 101.9 mm (4.0 in) 132.7 mm (5.2 in) 155.8 mm (6.1 in) 169.8 mm (6.7 in) 3 142.6 mm (5.6 in) 173.4 mm (6.8 in) 196.5 mm (7.7 in) 210.5 mm (8.3 in) 4 183.3 mm (7.2 in) 214.1 mm (8.4 in) 237.2 mm (9.3 in) 251.2 mm (9.9 in) {mounting nut included) 190 5 224.0 mm (8.8 in) - - - Internal Threads Hoe 2 wm aspari | * Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape 4 Models with black housing are listed. For gray housing, add suffix C at the end of the model number (cabled models) or before the Q (QD models), for example, TL50HRC or TL5S0HRCQ. 5 The first color listed is the bottom color, going up in successive order. Contact the factory for other colors and color combinations & Integral QD models only are listed; mating cordset required (see Cordsets on page 4). + For 150 mm (5.9 in) PVC pigtail with QD, replace Q with QP in the model number, for example, TLSOHRQP. * For 2 m (6.5 ft) cable, omit suffix Q from the model number, for example, TLS0HR. www.bannerengineering.com - tel: 763-544-3164 P/N 152837_web Rev. HEZ-LIGHT TL50 High Brightness Tower Light Hookups 4-Pin Models Sourcing (PNP) Input Indicator 3 _ Color 18-30V de () 4 - 2-27 ac jon p 2 Sinking (NPN) Input i 3 Indicator + Color 48-30V de (@) 4 _ 21-27V ac jt pt Pins 1 and 2 could activate the corresponding color or the audible function, if available. Hookups 5-Pin Models Sourcing (PNP) Input Indicator 3 - olor 18-30V de 4 21-27V ac al + OOO! Sinking (NPN) Input inacator 3 + O , RNS @) () pt o Pin 5 could activate the corresponding color or the audible function, if available. Hookups 8-Pin Models Sourcing (PNP) Input Indicator a =- Color 48-30V de 6 21-27V ac om + OOOO \ Sinking (NPN) Input ator [oes 5 Color OOOOO \ ee Pin 4 could activate the corresponding color or the audible function, if available. Pins 3 and 8 are not used. P/N 152837_web Rev. H www.bannerengineering.com - tel: 763-544-3164 18-30V de 6 oe 21-27V ac Key: 1 = Brown 2 = White 3 = Blue 4= Black Key: 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Key: 1 = White 2 = Brown 3 = Green 4= Yellow 5 = Gray 6 = Pink 7 = Blue 8 = Red C1 = Color 1 C2 = Color 2 C3 = Color 3 A= Audible C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 A= Audible C1 = Color 1 C2 = Color 2 C3 = Color 3 C4 = Color 4 C5 = Color 5 A= AudibleAccessories Cordsets EZ-LIGHT TL50 High Brightness Tower Light 4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout MQDC-406 1.83 m (6 ft) MQDC-415 4.57 m (15 ft) uy _ yp. - MQDC-430 9.14 m (30 ft) Straight M12x1 1=8 0145 = Brown MQDC-450 15.2 m (50 ft) 9 = White 3 = Blue 4 = Black 5-Pin Threaded M12/Euro-Style Cordsets (Single Ended) Model Length Style Dimensions MQDC1-501.5 0.50 m (1.5 ft) aaTyp. MQDC1-506 1.83 m (6 ft) Straight MQDC1-515 4,57 m (15 ft) MQDC1-530 9.14 m (30 ft) 1 = Brown MQDC1-506RA 1.83 m (6 ft) 2 = White ! 2 Typ. 3 = Blue MQDC1-515RA 4.57 m (15 ft) p61 T 4 = Black HO = 5 = Gray Right-Angle MQDC1-530RA 9.14 m (30 ft) Mi2x1 0145 [0.57"] 8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield Model Length Style Dimensions Pinout MQDC2S-806 1.83 m (6 ft) MQDC2S-815 4.57 m(15 ft) r M4Typ, +t 2 ; 7 MQDC2S-830 9.14 m (30 ft) Straight ST I)! 1 4 7 MQDC2S-850 15.2 m (50 ft) Mi2x1 6 8 , 0145 1 = White MQDC2S-806RA 1.83 m (6 ft) 2 = Brown 3 = Green MQDC2S-815RA 4,57 m (15 ft) 4 = Yellow MQDC2S-830RA 9.14 m (30 ft) = any = Pin MQDC2S-850RA 15.2 m (50 ft) Right-Angle 7 = Blue 8 = Red 5145 [0.57"] www.bannerengineering.com - tel: 763-544-3164 P/N 152837_web Rev. HEZ-LIGHT TL50 High Brightness Tower Light Mounting Brackets All measurements are in mm SMB30A 45 + Right-angle bracket with curved slot for versatile orientation * Clearance for M6 (% in) hardware * Mounting hole for 30 mm sensor 12-ga. stainless steel Hole center spacing: A to B=40 Hole size: A=o 6.3, B= 27.1 x 6.3, C=9 30.5 SMB30FA Swivel bracket with tilt and pan a movement for precise adjustment * Mounting hole for 30 mm sensor * 12-ga. 304 stainless steel 36.3 B 68.9 Easy sensor mounting to extrude A rail T-slot Metric and inch size bolt available Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= @ 30.1 SMB30MM * 12-ga. stainless steel bracket with curved mounting slots for versa- tile orientation * Clearance for M6 (% in) hardware * Mounting hole for 30 mm sensor Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6x7,B=96.4,C=@ 30.1 SMBAMS30P 45 Flat SMBAMS series bracket c 30 mm hole for mounting sensors A * Articulation slots for 90+ rotation 93 12-ga. 300 series stainless steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=g 6.5, C=a 31.0 SMBAMS30RA * Right-angle SMBAMS series bracket * 30 mm hole for mounting sensors * Articulation slots for 90+ rotation * 12-ga. (2.6 mm) cold-rolled steel Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B= 6.5, C=9 31.0 SMB30SC * Swivel bracket with 30 mm mounting hole for sensor * Black reinforced thermoplastic polyester =f * Stainless steel mounting and swivel locking hardware included aS A Hole center spacing: A=a 50.8 Hole size: A=9 7.0, B=9 30.0 LMB Sealed Right-Angle Bracket Model Description Construction LMB30RA Direct-Mount Models: Bracket kit with base, 30 mm LMB30RAC adapter, set screw, fasteners, o-rings, and gaskets Black polycarbonate Gray polycarbonate LMBE12RA arately) Pipe-Mount Models: Bracket kit with base, 4-14 pipe adapter, set screw, fasteners, o-rings, and gas- LMBE12RAC kets. For use with stand-off pipe (listed and sold sep- Black polycarbonate Gray polycarbonate P/N 152837_web Rev. H www.bannerengineering.com - tel: 763-544-3164EZ-LIGHT TL50 High Brightness Tower Light Elevated Mount System Model Features Components SA-M30TE12 - Black Acetal * Streamlined black acetal or white UHMW stand-off pipe adapter/cover * Connects between 30 mm light base and % in. NPSM/DN15 SA-M30TE12C - White UHMW pipe * Mounting hardware included 150 mm (6 in) long 150 mm (6 in) long 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long Polished 304 Stainless | Black Anodized Alumi- | Clear Anodized Alumi- Steel num num SOP-E12-150SS SOP-E12-150A SOP-E12-150AC * Elevated-use stand-off pipe (7 in. NPSM/DN15) * Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface * in. NPT thread at both ends Compatible with most industrial environments SA-E12M30 - Black Acetal * Streamlined black acetal or white UHMW mounting base adapter/cover * Connects between % in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole * Mounting hardware included SA-E12M30C - White UHMW Banner Engineering Corp Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. INNO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSE- QUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARIS- ING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. BANNER: more sensors, more solutions www.bannerengineering.com - tel: 763-544-3164