CSC Vishay Dale Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP FEATURES * Isolated, bussed and dual terminator schematics available * Body height: "A" profile = 0.195" (4.95 mm) and "B" profile = 0.295" (7.50 mm) standard; custom "C" profile = 0.350" (8.89 mm) also available * "A" profile standard in 4 thru 12 pins * Thick film resistive elements * Reduces total assembly costs * Resistor elements protected by tough epoxy conformal coating * Wide resistance range (10 to 2.2 M) * Available in bulk pack as standard; optional tube pack is also available * Meets EIA/ECA-CB23 rev. G whisker test requirements for Class 1A products * Compliant to RoHS directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ SCHEMATIC POWER RATING RESISTANCE TEMP. COEFFICIENT TCR TRACKING (1) MAX. WORKING TOL. (2) ELEMENT (1) RANGE (- 55 C to + 125 C) (55 C to + 125 C) VOLTAGE (3) % P70 C W ppm/C ppm/C VDC 0.20 10 to 50 250 1, 2, 5 50 100 50.1 to 2.2M 100 0.25 0.30 10 to 50 250 1, 2, 5 50 100 50.1 to 2.2M 100 0.40 0.20 10 to 50 250 1, 2, 5 150 100 50.1 to 2.2M 100 0.25 PACKAGE HEIGHT A B A B A B CSCxxx01 CSCxxx03 CSCxxx05 Notes * See derating curves for package power rating (1) For resistor power ratings at + 25 C see derating curves (2) 2 % standard, 1 % and 5 % available (3) Continuous working voltage shall be P x R or maximum working voltage, whichever is less GLOBAL PART NUMBER INFORMATION New Global Part Numbering: CSC08A03100RGEK (preferred part number format) C GLOBAL MODEL CSC S C 0 8 A PACKAGE HEIGHT A = "A" profile B = "B" profile PIN COUNT 04 to 12 pin available 04 = 4 pin 08 = 8 pin 12 = 12 pin 0 3 1 0 RESISTANCE VALUE R= K = k M = M 10R0 = 10 680K = 680 k 1M00 = 1.0 M SCHEMATIC 01 = Bussed 03 = Isolated 00 = Special 0 R TOLERANCE CODE F=1% G=2% J=5% S = Special G E K PACKAGING SPECIAL EK = Lead (Pb)-free, bulk PA = Tin/lead, bulk Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable Historical Part Number example: CSC08A03101GEK (will continue to be accepted) CSC HISTORICAL MODEL 08 A PIN COUNT PACKAGE HEIGHT 03 101 G EK SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: CSC08A05131AGEK (preferred part number format) C S C 0 8 A 0 5 1 3 1 A G E K GLOBAL MODEL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING SPECIAL CSC 04 to 12 pin available 04 = 4 pin 08 = 8 pin 12 = 12 pin A = "A" profile B = "B" profile 05 = Dual terminator 3 digit impedance code, followed by alpha modifier (see impedance codes table) F=1% G=2% J=5% EK = Lead (Pb)-free, bulk PA = Tin/lead, bulk Blank = Standard (Dash Number) (Up to 3 digits) From 1 to 999 as applicable Historical Part Number example: CSC08A05131AGEK (will continue to be accepted) CSC HISTORICAL MODEL www.vishay.com 1 08 A PIN COUNT PACKAGE HEIGHT 05 221 331 G EK SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 07-Jun-10 CSC Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP Vishay Dale TECHNICAL SPECIFICATIONS PARAMETER UNIT CSC SERIES Voltage Coefficient of Resistance Veff < 50 ppm typical Dielectric Strength VAC 200 Isolation Resistance (03 Schematic) > 100M Operating Temperature Range C - 55 to + 125 A Max. 0.098 (2.49) Max. DIMENSIONS in inches (millimeters) C Max. Pin #1 0.130 0.010 (3.30 0.254) 0.032 (0.813) 0.050 (1.27) Max. 0.018 0.003 (0.457 0.076) 0.100 0.010 (2.54 0.254) Non-Accumulative GLOBAL MODEL 2 3 n-1 n 03 SCHEMATIC 1 2 4 n-1 n 05 SCHEMATIC R1 1 2 3 Document Number: 31509 Revision: 07-Jun-10 n-1 n A (Maximum) B CSC04 3 0.390 (9.91) 0.300 (7.62) 4 0.490 (12.45) 0.400 (10.16) CSC06 5 0.590 (14.99) 0.500 (12.70) CSC07 6 0.690 (17.53) 0.600 (15.24) CSC08 7 0.790 (20.07) 0.700 (17.78) CSC09 8 0.890 (22.61) 0.800 (20.32) CSC10 9 0.990 (25.15) 0.900 (22.86) CSC11 10 1.09 (27.69) 1.00 (25.40) CSC12 11 1.19 (30.23) 1.100 (27.94) NUMBER OF RESISTORS A (Maximum) B CSC04 2 0.390 (9.91) 0.300 (7.62) CSC06 3 0.590 (14.99) 0.500 (12.70) CSC08 4 0.790 (20.07) 0.700 (17.78) CSC10 5 0.990 (25.15) 0.900 (22.86) CSC12 6 1.19 (30.23) 1.100 (27.94) NUMBER OF RESISTORS A (Maximum) B GLOBAL MODEL R2 NUMBER OF RESISTORS CSC05 GLOBAL MODEL 3 0.012 0.003 (0.305 0.076) (Leads are along centerline of body) B 01 SCHEMATIC 1 0.045 (1.14) CSC04 4 0.390 (9.91) 0.300 (7.62) CSC05 6 0.490 (12.45) 0.400 (10.16) CSC06 8 0.590 (14.99) 0.500 (12.70) CSC07 10 0.690 (17.53) 0.600 (15.24) CSC08 12 0.790 (20.07) 0.700 (17.78) CSC09 14 0.890 (22.61) 0.800 (20.32) CSC10 16 0.990 (25.15) 0.900 (22.86) CSC11 18 1.09 (27.69) 1.00 (25.40) CSC12 20 1.19 (30.23) 1.100 (27.94) For technical questions, contact: ff2aresistors@vishay.com C (Maximum) "A" profile = 0.195 (4.95) "B" profile = 0.295 (7.50) C (Maximum) "A" profile = 0.195 (4.95) "B" profile = 0.295 (7.50) C (Maximum) "A" profile = 0.195 (4.95) "B" profile = 0.295 (7.50) www.vishay.com 2 CSC Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP Vishay Dale MECHANICAL SPECIFICATIONS STOCKED RESISTANCE VALUES IN OHMS ("G" TOLERANCE) Marking Resistance to Solvents Standard E-24 resistance values stocked. Consult factory. Permanency testing per MIL-STD-202, method 215 Per MIL-STD-202, method 208E, RMA flux Solderability Body Many dual terminator resistance values stocked. Consult factory. High alumina, epoxy coated Terminals Solder plated leads IMPEDANCE CODES R1 () CODE R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Power Rating (W) "A" Profile 1.90 1.50 1.15 "A" PROFILE + 70 C PACKAGE RATINGS CSC12A 1.5 W CSC11A 1.37 W CSC10A Package CSC10A 1.25 W CSC08A Package CSC09A 1.12 W CSC06A Package CSC08A 1.00 W CSC07A 0.87 W CSC06A 0.75 W CSC05A 0.62 W CSC04A 0.40 W Single Resistor 03 Schematic 0.45 0.30 01 and 05 Schematics - 50 + 25 + 70 + 125 + 150 Ambient Temperature C Derating "B" Profile CSC12B 1.90 W CSC11B 1.75 W CSC10B 1.60 W CSC09B 1.45 W CSC08B 1.30 W Single Resistor CSC07B 1.15 W 03 Schematic CSC06B 1.00 W 01 and 05 Schematics CSC05B 0.80 W CSC04B 0.60 W CSC10B Package 2.50 Power Rating (W) "B" PROFILE + 70 C PACKAGE RATINGS CSC08B Package 2.00 CSC06B Package 1.50 0.60 0.38 - 50 Derating www.vishay.com 3 + 25 + 70 + 125 + 150 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com Document Number: 31509 Revision: 07-Jun-10 CSC Thick Film Resistor Networks, Single-In-Line, Conformal Coated SIP Vishay Dale CIRCUIT APPLICATIONS 01 Schematic Bussed The CSCxxx01 single-in-line resistor networks provide the user with nominally equal resistors, each connected to a common pin (pin no. 1). Commonly used in the following applications: * "Wired OR" Pull-up * Power Gate Pull-up * MOS/ROM Pull-up/Pull-down 1 2 3 n-1 n * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up * "A" profile standard, "B" Profile available. 03 Schematic Isolated The CSCxxx03 single-in-line resistor networks provide the user with nominally equal resistors. Each resistor is isolated from all others. Commonly used in the following applications: 1 2 3 4 n-1 * "Wired OR" Pull-up * Power Driven Pull-up * Power Gate Pull-up * Line Termination n * Long-Line Impedance Balancing * LED Current Limiting * ECL Output Pull-down * TTL Input Pull-down * "A" Profile standard, "B" Profile available. 05 Schematic Dual Terminator R2 The CSCxxx05 circuits contain series pairs of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring. R1 * "A" profile standard, "B" Profile available. 1 2 3 n-1 n PERFORMANCE CONDITIONS MAX. R (TYPICAL TEST LOTS) 5 cycles between - 65 C and + 125 C 0.50 % R 2.5 x rated working voltage, 5 s 0.25 % R 45 min at full rated working voltage at - 65 C 0.25 % R 240 h with humidity ranging from 80 % RH to 98 % RH 1.00 % R Leads immersed in + 350 C solder to within 1/16" of body for 3 s 0.25 % R Total of 18 shocks at 100 g's 0.25 % R Vibration 12 h at maximum of 20 g's between 10 Hz and 2000 Hz 0.25 % R Load Life 1000 h at + 70 C, rated power applied 1.5 h "ON", 0.5 h "OFF" for full 1000 h period. Derated according to the curve. 1.00 % R Terminal Strength 4.5 pound pull for 30 s 0.25 % R Insulation Resistance 10 000 M (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - TEST Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Dielectric Withstanding Voltage Document Number: 31509 Revision: 07-Jun-10 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000