TD+ (1) TCT (2) TD- |}(P3 @) RD+(P4) RCT @) RD-(P9) CHASSIS GND 9) ELECTRICAL SPECIFICATIONS: 1.0 COMPLIES WITH THE EURUPEAN DIRECTIVE 2002/95/7EC, CALLING FOR THE ELIMINATION OF LEAD AND OTHER HAZARDOUS SUBSTANCES FROM 2.0 UNUSED PIN P7 IS OMITTED, 1CT 1 1CT 75 1CT + 1CT | Pit PL 752 75 | | 1000pF, 2KV NOTES ELECTRONIC PRODUCTS. 1CT : 1CT+ 3% 1CT : 1CT + 3% 1.0 TURNS RATIO: (P4P5P6) : (J3J6 P3P2-P1 J1iJ2 2.0 INDUCTANCE: ass P3-P1 3.0 LEAKAGE INDUCTANCE: P3-P1 4.0 INTERWINDING CAPACITANCE: PS pops TO tea P3,P2,P1) TO (J2,J1 5.0 DC RESISTANCE: (J6J3)=(J2J1) P6P4 (WITH J6 AND J3 SHORT WITH J2 AND J1 SHORT. 550uH MIN. @ 0.1V, 100KHz, 8mA DC Bias 350uH MIN. @ 0.1V, 100KHz, 8mA DC Bias 0.3 MAX. @ 1MHz 0.3 MAX. @ 1MHz SOpf MAX @ 1MHz SOpf MAX. @ 1MHZ 1.35 ohms Max. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJad hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. SHEET 1 OF 4 DRAWING _NO. SI-50154-F|" 146.0 RETURN LOSS: (P4P6)=100 OHMS AND (P1P3)=100 OHM REF. 1MHz TO 3OMHz : 18dB MIN. 60MHz TO 80MHz : 12dB MIN. NOTE: 100 OHMS CONNECTED TO (J2J1) OR (J3J6). 7.0 DIELECTRIC WITHSTAND: (J1, J2) TO (P1, P3 : 1500 VAC J3, J6) TO (P4, P6 : 1500 VAC 8.0 INSERTION LOSS: RS=RL=100 ohms 100KHz TO 100MHz : 1.1 dB TYP 9.0 RISE TIME: RS=100 OHMS AND RL = 100 OHMS OUTPUT VOLTAGE = 1 V peak : 3.0 nS MAX PULSE WIDTH= 112nS : 3.0 nS MAX 10.0 CROSS TALK: 1-100 MHz : 40 dB TYP 11.0 COMMON TO COMMON MODE ATTENUATION: 3OMHz TO 100MHz : 35dB TYP THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJad hitp://www.stewartconnector.com SHEET 2 OF 4 DRAWING _NO. Sl-50154F m4340 010 [0.25] aw [864] YEL 100 [2.54] (2) 9.040 +.003 [1.02 +0. oa ww PIN #11 060 [1.27] seg PIN #10 f MagJade 9.035 +.003 [0.89 +0.08] (8 N >< .006| (SIGNAL) 3 Bel Stewart = se e Part Number e $.062 +.003 [1.57 0.08] (2 os [1.27] @ | 3 CNTRY YYWW FC a []g.006] sHe) 2 128 [3.25 % \ 9 oO 450 [143)-1 | SS BR . . o , &, | g006 080 2.03) sso r4sl-| 2 ois / (POSTS) = ON P.C.B. RECOMMENDED HOLE LAYOUT e635 [16.13] MAX SEEN FROM COMPONENT SIDE ( .708 [17.98] ) ALL CENTERLINE DIMENSIONS ARE BASIC. GREEN YELLOW NOTES: wg 1. CONNECTOR MATERIALS: mS HOUSING: THERMOPLASTIC UL94 V-0 STEWART 22 CONTACT/SHIELD: COPPER ALLOY HHH 25 SHIELD PLATING: NICKEL OR TIN \ PIN: 1 | 8 CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. 2. PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. SEE ELECTRICAL DRAWING FOR OMITTED PINS. 3. TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. . ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] 5. REFLOW AND WAVE SOLDER COMPATIBLE-260C FOR 10 425 [10.79] ~ SECONDS MAX. *WITH A FORWARD CURRENT OF 20 mA (TYP) LED SPECIFICATION STANDARD LED | WAVELENGTH | FORWARD V (MAX)| *(TYP) GREEN 565 nm 2.5 V 2.2V YELLOW 590 nm 2.5 V 2.1 V Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 MagJadk hitp:/ /www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT| OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. SHEET 5 OF 4 DRAWING NO. SI-50154F|* 1 1{| 4 Loon FROM TOP R.010 [0.25] OF PCB TO BOTTOM (4) MAX. OF PANEL OPENING SUGGESTED PANEL OPENING a rr FI | = POINT OF CONTACT WITH PANEL 080 [2.03] | ons [6.98] MAX. 1. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. 2. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] Glen Rock, Pa 17327-9199 Bel Stewart Connector MagJad 11118 Susquehanna Trail, South CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART SHEET 717.234.7512 hitp://www.stewartconnector.com DRAWING_NO. 4 OF 4 SI-50154F |" 09