RN1701~RN1706
2014-03-01
1
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) (Bias Resistor built-in Transistor)
RN1701, RN1702, RN1703
RN1704, RN1705, RN1706
Switching, Inverter Circuit, Interface Circuit
and Driver Circuit Applications
z Including two devices in USV (ultra super mini type with 5 leads)
z With built-in bias resistors
z Simplify circuit design
z Reduce a quantity of parts and manufacturing process
z Complementary to RN2701 to RN2706
Equivalent Circuit and Bias Resistor Values
Equivalent Circuit (Top View)
Absolute Maximum Ratings (Ta = 25°C) (Q1, Q2 Common)
Characteristic Symbol Rating Unit
Collector-base voltage VCBO 50 V
Collector-emitter voltage
RN1701 to 1706
VCEO 50 V
RN1701 to 1704 10
Emitter-base voltage
RN1705, 1706
VEBO
5
V
Collector current IC 100 mA
Collector power dissipation PC* 200 mW
Junction temperature Tj 150 °C
Storage temperature range
RN1701 to 1706
Tstg −55 to150 °C
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
*: Total rating
JEDEC ―
JEITA ―
TOSHIBA 2-2L1A
Weight: 6.2mg (typ.)
Type No. R1 (kΩ)R2 (kΩ)
RN1701 4.7 4.7
RN1702 10 10
RN1703 22 22
RN1704 47 47
RN1705 2.2 47
RN1706 4.7 47
Unit: mm
USV
Start of commercial production
1992-01
RN1701~RN1706
2014-03-01
2
Electrical Characteristics (Ta = 25°C) (Q1, Q2 Common)
Characteristic Symbol
Test
Circuit Test Condition Min Typ. Max Unit
ICBO ― V
CB = 50V, IE = 0 ― ― 100
Collector cut-off current RN1701 to 1706
ICEO ― V
CE = 50V, IB = 0 ― ― 500
nA
RN1701 ― 0.82 ― 1.52
RN1702 ― 0.38 ― 0.71
RN1703 ― 0.17 ― 0.33
RN1704 ―
VEB = 10V, IC = 0
0.082 ― 0.15
RN1705 ― 0.078 ― 0.145
Emitter cut-off current
RN1706
IEBO
―
VEB = 5V, IC = 0
0.074 ― 0.138
mA
RN1701 ― 30 ― ―
RN1702 ― 50 ― ―
RN1703 ― 70 ― ―
RN1704 ― 80 ― ―
RN1705 ― 80 ― ―
DC current gain
RN1706
hFE
―
VCE = 5V, IC = 10mA
80 ― ―
―
Collector-emitter
saturation voltage RN1701 to 1706 VCE (sat) ― I
C = 5mA, IB = 0.25mA ― 0.1 0.3 V
RN1701 ― 1.1 ― 2.0
RN1702 ― 1.2 ― 2.4
RN1703 ― 1.3 ― 3.0
RN1704 ― 1.5 ― 5.0
RN1705 ― 0.6 ― 1.1
Input voltage (ON)
RN1706
VI (ON)
―
VCE = 0.2V, IC = 5mA
0.7 ― 1.3
V
RN1701 to 1704 ― 1.0 ― 1.5
Input voltage (OFF)
RN1705, 1706
VI (OFF) ―
VCE = 5V, IC = 0.1mA
0.5 ― 0.8
V
Transition frequency RN1701 to 1706 fT ― V
CE = 10V, IC = 5mA ― 250 ― MHz
Collector output
capacitance RN1701 to 1706 Cob ― VCB = 10V, IE = 0,
f = 1MHz ― 3 6 pF
RN1701 ― 3.29 4.7 6.11
RN1702 ― 7 10 13
RN1703 ― 15.4 22 28.6
RN1704 ― 32.9 47 61.1
RN1705 ― 1.54 2.2 2.86
Input resistor
RN1706
R1
―
―
3.29 4.7 6.11
kΩ
RN1701 to 1704 ― 0.9 1.0 1.1
RN1705 ― 0.0421 0.0468 0.0515
Resistor ratio
RN1706
R1/R2
―
―
0.09 0.1 0.11
―
RN1701~RN1706
2014-03-01
3
(Q1, Q2 Common)
RN1701~RN1706
2014-03-01
4
(Q1, Q2 Common)
RN1701~RN1706
2014-03-01
5
(Q1, Q2 Common)
RN1701~RN1706
2014-03-01
6
Type Name Marking
RN1701
RN1702
RN1703
RN1704
RN1705
RN1706
RN1701~RN1706
2014-03-01
7
RESTRICTIONS ON PRODUCT USE
• Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR
APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH
MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without
limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for
automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,
safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE
PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your
TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the
U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited
except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES
OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
