CM1407 4 and 8-Channel EMI Filter Arrays with ESD Protection Product Description ON Semiconductor CM1407 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1407 has component values of 7.5 pF - 200 W - 7.5 pF (fC = 210 MHz). The parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of 15 kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than 30 kV. This device is particularly well-suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package and easy-to-use pin assignments. In particular, the CM1407 is ideal for EMI filtering and protecting data lines from ESD in wireless handsets. The CM1407 is available in space-saving, low-profile, 8 and 16-lead WDFN packages. It is fabricated with ON Semiconductor's Centuriont process and available with optional lead-free finishing. * * Four and Eight Channels of EMI Filtering with ESD Protection Greater than 25 dB of Attenuation from 800 Mhz to 3 GHz 15 kV ESD Protection (IEC 61000-4-2, Contact Discharge) 30 kV ESD Protection (MIL-STD-883, Method 3015, HBM) Fabricated with Centuriont Advanced Low Capacitance Zener Process Technology Space Saving, Low Profile 8 and 16-lead 0.5 mm Pitch WDFN Packages These Devices are Pb-Free and are RoHS Compliant Applications * I/O Port Protection for Mobile Handsets, Notebook Computers, PDAs etc. * EMI Filtering for Data Ports in Cell Phones, PDAs or Notebook * WDFN16 DF/DE SUFFIX CASE 511AU WDFN8 DF/DE SUFFIX CASE 511BE BLOCK DIAGRAM 200 W FILTERn* FILTERn* 7.5 pF C GND 7.5 pF C 1 of 4/8 EMI Filtering + ESD Channels *See Package/Pinout Diagrams for Expanded Pin Information. Features * * * * * http://onsemi.com Computers EMI Filtering for LCD, Camera and Chip-to-Chip Data Lines MARKING DIAGRAM N78X N07 4X N07 4X = Specific Device Code N78X = Specific Device Code ORDERING INFORMATION Device Package Shipping CM1407-04DF WDFN8 (Pb-Free) 3000/Tape & Reel CM1407-08DF WDFN16 (Pb-Free) 3000/Tape & Reel CM1407-04DE WDFN8 (Pb-Free) 3000/Tape & Reel CM1407-08DE WDFN16 (Pb-Free) 3000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2011 March, 2011 - Rev. 3 1 Publication Order Number: CM1407/D CM1407 PACKAGE / PINOUT DIAGRAMS Top View (Pins Down View) 8 7 6 Bottom View (Pins Up View) 5 1 2 3 4 CM1407-04DE/DF 8-Lead WDFN Package GND PAD N07 4X Pin 1 Marking 8 7 6 5 1 2 3 4 16 15 14 13 12 11 10 9 1 CM1407-08DE/DF 16-Lead WDFN Package with Exposed End Pads 7 8 16 15 14 13 12 11 10 9 N78X Pin 1 Marking 1 2 3 4 5 2 3 4 5 6 GND PAD 6 7 8 Note: See Ordering Information section for device specific marking. Table 1. PIN DESCRIPTIONS Pins Pins 1406-04Dx 1406-08Dx Description 1406-04Dx Name 1406-08Dx 1 1 Name Description FILTER1 Filter Channel 1 8 16 FILTER1 Filter Channel 1 2 2 FILTER2 Filter Channel 2 7 15 FILTER2 Filter Channel 2 3 3 FILTER3 Filter Channel 3 6 14 FILTER3 Filter Channel 3 4 4 FILTER4 Filter Channel 4 5 13 FILTER4 Filter Channel 4 5 FILTER5 Filter Channel 5 12 FILTER5 Filter Channel 5 6 FILTER6 Filter Channel 6 11 FILTER6 Filter Channel 6 7 FILTER7 Filter Channel 7 10 FILTER7 Filter Channel 7 8 FILTER8 Filter Channel 8 9 FILTER8 Filter Channel 8 GND Device Ground GND Pad http://onsemi.com 2 CM1407 SPECIFICATIONS Table 2. ABSOLUTE MAXIMUM RATINGS Parameter Rating Units -65 to +150 C DC Power per Resistor 100 mW Package DC Power Rating 300 mW Storage Temperature Range Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Table 3. STANDARD OPERATING CONDITIONS Parameter Operating Temperature Range Rating Units -40 to +85 C Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1) Symbol Parameter Conditions Min Typ Max 160 200 240 W 6 7.5 9 pF R Resistance C Capacitance At 2.5 V DC, 1 MHz, 30 mV AC Diode Standoff Voltage IDIODE = 10 mA 6.0 ILEAK Diode Leakage Current (Reverse Bias) VDIODE = 3.3 V 0.1 1 VSIG Signal Voltage Positive Clamp Negative Clamp ILOAD = 10 mA ILOAD = -10 mA 6.8 -0.8 9.0 -0.4 VESD In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 VDIODE (Note 2) 5.6 -1.5 30 15 1. TA = 25C unless otherwise specified. 2. ESD applied to input and output pins with respect to GND, one at a time. http://onsemi.com 3 Units V mA V kV CM1407 PERFORMANCE INFORMATION Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 1. Channel 1 EMI Filter Performance (CM1407-04) Figure 2. Channel 2 EMI Filter Performance (CM1407-04) http://onsemi.com 4 CM1407 PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 3. Channel 3 EMI Filter Performance (CM1407-04) Figure 4. Channel 4 EMI Filter Performance (CM1407-04) http://onsemi.com 5 CM1407 PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 5. Channel 1 EMI Filter Performance (CM1407-08) Figure 6. Channel 2 EMI Filter Performance (CM1407-08) http://onsemi.com 6 CM1407 PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 7. Channel 3 EMI Filter Performance (CM1407-08) Figure 8. Channel 4 EMI Filter Performance (CM1407-08) http://onsemi.com 7 CM1407 PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 9. Channel 5 EMI Filter Performance (CM1407-08) Figure 10. Channel 6 EMI Filter Performance (CM1407-08) http://onsemi.com 8 CM1407 PERFORMANCE INFORMATION (Cont'd) Typical Filter Performance (nominal conditions unless specified otherwise, 0 V DC Bias, 50 W Environment) Figure 11. Channel 7 EMI Filter Performance (CM1407-08) Figure 12. Channel 8 EMI Filter Performance (CM1407-08) http://onsemi.com 9 CM1407 PERFORMANCE INFORMATION (Cont'd) Figure 13. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5 V DC and 255C) http://onsemi.com 10 CM1407 PACKAGE DIMENSIONS WDFN8 2x2, 0.5P CASE 511BE-01 ISSUE O A D PIN ONE REFERENCE 2X CCC CCC CCC 0.10 C E DETAIL A ALTERNATE CONSTRUCTIONS TOP VIEW CC EE EXPOSED Cu DETAIL B A 0.10 C A3 A3 MOLD CMPD A1 DETAIL B 0.08 C NOTE 4 C D2 1 8X 4 SEATING PLANE L 5 e BOTTOM VIEW 8X DIM A A1 A3 b D D2 E E2 e K L L1 MILLIMETERS MIN MAX 0.70 0.80 0.00 0.05 0.20 REF 0.20 0.30 2.00 BSC 1.50 1.70 2.00 BSC 0.80 1.00 0.50 BSC 0.25 REF 0.20 0.40 --- 0.15 RECOMMENDED SOLDERING FOOTPRINT* 8X 1.70 PACKAGE OUTLINE E2 8 EE CC CC ALTERNATE CONSTRUCTIONS A1 SIDE VIEW DETAIL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 MM FROM TERMINAL TIP. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. L1 0.10 C 2X L L B 0.50 b 0.10 C A B 0.05 C 2.30 1.00 NOTE 3 1 0.50 PITCH 8X 0.30 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 11 CM1407 PACKAGE DIMENSIONS WDFN16, 4x1.6, 0.5P CASE 511AU-01 ISSUE O A B D PIN ONE REFERENCE 2X EE EE EE L1 DETAIL A E ALTERNATE TERMINAL CONSTRUCTIONS 0.10 C 2X 0.10 C EE CC EXPOSED Cu TOP VIEW (A3) DETAIL B 0.10 C 0.08 C A1 SIDE VIEW D2 DETAIL A 1 K F C 16X 8 16 9 e e/2 MOLD CMPD EEE CCC CCC A3 A1 DETAIL B A NOTE 4 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30 MM FROM TERMINAL TIP. 4. COPLANARITY APPLIES TO THE EXPOSED PAD AS WELL AS THE TERMINALS. L L SEATING PLANE ALTERNATE CONSTRUCTIONS DIM A A1 A3 b D D2 E E2 e F K L L1 MILLIMETERS MIN MAX 0.70 0.80 0.00 0.05 0.20 REF 0.20 0.30 4.00 BSC 3.10 3.30 1.60 BSC 0.30 0.50 0.50 BSC 0.25 REF 0.30 REF 0.20 0.40 --- 0.15 L E2 RECOMMENDED SOLDERING FOOTPRINT* 4.30 16X 2X b 0.10 C A B 0.05 C 0.35 16X 3.30 0.53 NOTE 3 BOTTOM VIEW 1.90 3X 0.50 16X 0.30 0.50 PITCH DIMENSION: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Centurion is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 12 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative CM1407/D