WOW! Catalogue World of Weller www.labem.pl (R) Soldering, Microtools, Desoldering, Hot Air, Rework, Fume Extraction, Electronic Screwdrivers, Dispensing Systems, Accessories, etc. Page 06 - Page 229 Tweezers, Cutters, Pliers, EROP, Stripping Tools, Kits, etc. Page 230 - Page 333 Knives, Cutters, Screwdrivers, Kits, etc. Page 334 - Page 351 Subject to technical change without notice. Liability for errors, misprints and omissions excluded. www.labem.pl 3 Content General Information Weller - Trusted Technology Heating Element Technology Selection Tool for Soldering irons Why Fume Extraction ? Soldering 6 - 11 6-7 8-9 10 - 11 98 - 99 Solutions for Fume Extraction - For clean air 100 - 101 Recommended treatment of Soldering Tips 160 - 161 Soldering Stations 12 - 43 WX Soldering Stations (Overview page 12 - 14) 12 - 19 Soldering Station (Overview page 20 - 22) 20 - 31 Special Applications Rework - For use with solder robots 32 - 35 - For use with inert gas 36 - 37 - Solder Feeder Systems 38 - 39 - Mobile Soldering 40 - 43 Rework 44 - 53 Soldering, Desoldering and Hot Air (Overview page 44 - 47) Desoldering Soldering and Desoldering Stations (Overview page 54 - 57) 54 - 61 Hot Air Hot Air Stations (Overview page 62 - 65) 62 - 73 Repair BGA/QFP Repair 74 - 83 Accessories Accessories 84 - 97 Temperature Measuring and Calibration 84 - 85 Preheating Plates 86 - 87 PCB Board Holders 88 - 89 Soldering Bathes 90 Thermal Stripping Tools 91 Manual Desoldering Pumps 92 Vacuum Pen / Solder Dispenser 93 Accessories Cleaning Tools Weller Overview Safety Rests Fume Extraction Fume Extraction (General Information page 98 - 101) 98 - 137 Volume Extraction (Overview page 102 - 103) 104 - 111 Accessories 112 - 117 Accessories Installation 118 - 121 Accessories Filter 122 - 124 Pipe System 75 4 94 - 97 138 - 139 125 Tip Extraction (Overview page 126-127) 126 - 137 Accessories 130 - 137 www.labem.pl Accessories Filter Pipe System 50 Fume Extraction Soldering Irons 132 - 133 133 Accessories Installation 134 - 135 Safety Rests 136 - 137 Soldering / Desoldering / Hot Air Irons 138 - 159 Soldering iron with different heating technologies Soldering Tips Active Tip 140 - 141 Fast Response 142 - 145 Silver Line 146 - 149 Magnastat Soldering Irons 150 - 151 Unregulated Line Voltage Soldering Irons 152 - 153 Desoldering Irons and Tweezers 154 - 157 Hot Air Irons 158 - 159 Soldering Tips 160 - 205 Soldering Tips (Overview page 162 - 163) 164 - 193 Nozzles (Overview page 162 - 163) 194 - 197 Hot Air Nozzles (Overview page 162 - 163) 198 - 204 Electric Electric Screwdrivers (Overview page 208 - 209) Screwdrivers Control Unit Electric Screwdriver 206 - 221 210 211 Accessories 212 - 213 Bits and Knives 214 - 220 Dispensing Dispensers (Overview page 212 - 213) Systems Dispensers Wands 222 - 229 222 - 224 225 Accessories / Needles 226 - 299 EREM Erem (Index page 220) 230 - 333 Xcelite Xcelite 334 - 351 Exploded Drawings 352 - 385 Index Numerical Index 386 - 391 Alpha Numerical Index 392 - 396 www.labem.pl 5 Weller - Time Tested & Trusted Technology Energy Efficient, Professional Soldering Stations Development of the magnastat soldering iron, the first temperature controlled soldering iron First analog controlled soldering station Energy saving 60 W First digital controlled soldering station Launch of stand-by and auto-off mode in soldering systems First intelligent soldering tools with increased energy efficiency 7W 1960 70 80 90 00 10 Year Quality Built to Guarantee Quality Cutting edge mechanical & electronic parts Fast reaction & recovery time Automatic tool recognition & downloading of parameters Micro processor controlled PID control Exact temperature settings per one degree No calibration needed for Weller soldering units ESD High Productivity - No Calibration Required Weller soldering stations do not need to be calibrated: the parts of the Weller heating element which determine the temperature have the same physical material characteristics and do not change over time or during use. Electronic control units do not wear out. Closed loop temperature regulation & high quality sensor & control technology assure temperature stability of the soldering tool during its lifetime. Built according to IPC J-STD001 D and DIN EN 61191-1. If higher accuracy than these standards is required, fine adjustment is possible. All indsutry and military ESD standards are met. www.labem.pl 6 Soldering - In a League of Their Own a b c d Safety First with Maximum Flexibility All Weller soldering stations are equipped with various possibilities for potential equalization: a) Hard ground without plug (original delivery) b) Potential equalization with plug - equalization line on center contact c) Potential free - with plug d) Soft ground - with plug and resistor soldered in: Grounding according to selected resistor www.labem.pl 7 Heating Element Technology Heating Technologies deliver precise POWER on DEMAND! RT XNT LT XT Soldering Application Solder pad size & joint mass www.labem.pl 8 Three Tip Technologies Silver-Line Power-Response Active-Tip The soldering tip transfers the heat to the solder joint. Power-Response Required Heat Demand Soldering iron Soldering Three Tip Technologies designed to master ALL soldering jobs - from the most delicate to the most diffcult! RT / RTW Active-Tip Technology Most delicate & temp- sensitive applications; for use under microscope; ultra fine tips with fastest heat response & best temp-control; cartridge tips XNT Power-Response Technology SMDs & THTs with very small solder pads & increased heat demand; perfect choice where Active-Tip above lacks sufficient power; lower cost, non-cartridge tips. LT Silver-Line Technology Universal SMD & THT applications both small & large; low mass silver tips offer absolute best heat transfer at lowest price in entire tip range; non-cartridge tips XT / XHT Power-Response Technology Most difficult, high mass soldering jobs; maximum power with ergonomic iron handle; choose when WXP/ WP 65 lack sufficient power; lower cost, non-cartridge tips. www.labem.pl 9 Selection Tool for Soldering irons Weller heating & tip technologies are designed for specific applications guaranteeing maximum flexibility! RT Soldering tips + WXMT WMRT XNT - RT RTW Solder pad size 40 W (55 W with RT 11), 12 V Ultra slim soldering iron; Ideal for microscope work. Active-Tip 2 x 40 W, 12 V Fast, intensive heat requirement Slim tweezers. Ideal for soldering and desoldering of very small SMD components. Soldering tips - Power-Response + - Solder pad size HS SMDs & THTs with very small solder pads & increased heat demand. XNT 65 W, 24 V Soldering tips + WXP 65 WP 65 LT + WXMP WMRP Soldering tips RTW Fast, intensive heat requirement - Silver-Line + + WSP 80 WP 80 Solder pad size HS 80 W, 24 V Universal SMD & THT applications both small & large heat demand.. LT Fast, intensive heat requirement - XT Soldering tips All-rounder with great heating power; soldering applications from small to large components with higher heat demand required. 10 + WXP 200 WP 200 120 W, 24 V Power-Response - + WXP 120 WP 120 Soldering tips XHT Solder pad size 200 W, 24 V Highest Power soldering iron; ideal for applications with highest mass applications e.g. LED back-panels or RF shieldings. www.labem.pl XT XHT Fast, intensive heat requirement - Soldering Active-Tip Technology This highly innovative technology offers ultra precise heating & temperature control specifically designed for microsoldering applications. The fully integrated tip cartridge (40W ) delivers the fastest recovery on the market for fine tips at just a slightly higher tip price. Temperature sensitive and miniature applications are mastered with precision & safety. Fastest heat up & recovery on the market Excellent reaction time with finest tips Optimal for soldering under microscope Rapid hot tip-change; no tool required C 350 250 Ready for soldering in ONLY 3 sec. 150 50 0 Power-Response Technology The newly improved technology maximizes soldering performance on the smallest to the largest joints. A perfect balance between power (65W, 120W & 200W), response, temperature control and lower tip costs makes this unique technology the most attractive solution - Top quality professional soldering designed to meet the highest industry standards. 2 4 6 8 10 12 14 16 18 20 SEC. Maximum power & rapid response Optimized sensor position Meeting highest industry standards Widest tip range with low price point C 400 300 30 % faster 200 0 20 Silver-Line Technology The low mass silver tips offer the absolute best heat transfer at the lowest price in our entire range of tips. The 80W ergonomically designed heating element and pencil type grip make this technology the top performer for universal soldering applications where tip price is a deciding factor. 65W up to 200W WP 120 WP 80 100 40 60 80 100 120 140 160 180 SEC. Effective heat transfer via silver core Fast ramp up & recovery Designed for universal applications Low mass tips with lowest price point C Capacity comparison Heating time 350 300 250 200 150 The Manufacturer Warranty can ONLY be guaranteed when using original Weller parts. 100 WP 80 14 sec. Standard soldering iron 45-55 sec. 50 www.labem.pl 11 Soldering Highly Efficient Stations Benchtop Soldering Solutions Hard to believe, but TRUE: This Weller workbench solution will save as much power as a single-person household uses in a whole year! The all-in-one professional soldering and energy-saving solution includes the new WX 2 dualchannel soldering station complete with WXP 65 intelligent soldering iron, the Zero Smog 4V solder fume extractor and a WHP series preheating plate. Compared to a conventional repair workstation, it is possible to save up to *1800 kWh per year. The WX 2 acts as a central control unit for the entire benchtop: the intelligent soldering irons, solder fume extractor and the preheating plate. When the soldering iron is not in use, the WX 2 switches all connected devices to Stand-by or Auto-off mode thereby ESD significantly reducing energy costs. *Savings based on customer experience with a WeIler soldering system is in use on average for one hour per day for 220 workdays per year. Only 1 Controll Unit per Workbench Easy monitoring of entire workplace - WX station acts as the digital controller for all units RS232 connection cable for controlling the pre-heating plate and the fume extraction units Digital and optical decoupled interface for SPS (e.g. robot applications) USB interface www.labem.pl 12 Soldering Process Controlled Soldering - Fast & Simple Fast, intuitive & multi-lingual touch screen operation Simultanuous operation of two tools with a maximum power of 255 W available Consistant & excellent soldering results by stable contact pressure thanks to an optimized, spring-loaded tip barrel Key data is saved directly on the tool; Visual process control via blue LED light Protection of Worker's Health & the Environment Weller Fume Extraction Systems protect operators from unhealthy fine particles and gases Auto-stand-by mode of soldering units increases energy efficiency and extends lifetime of products Running Cost & Energy savings Increased soldering efficiency & lowered tip prices reduce running costs Auto-stand-by mode & Auto-off mode result in significant energy savings www.labem.pl 13 Soldering Stations WX 1 WX 2 max. power supply 200 W Power-Response max. power supply 200 W (255 W) Active Tip Fume extraction WXP 65 XNT Soldering tips WXMP RT Soldering tips WXP 120 XT Soldering tips WXMT RTW Desoldering tips Preheating plates Solder bath WXP 200 XHT Soldering tips WX Adapter WXSB 200 WX Adapter for PC T005 87 647 11 Available September 2013 WX Adapter for Zero Smog T005 87 647 12 Adapter for Remote control T005 87 627 24 WX connection cable T005 87 647 10 WX HUB T005 87 647 26 14 Zero Smog 4V Zero Smog 6V Zero Smog 20T www.labem.pl WHP 1000 WHP 3000 600 W WHP 3000 1200 W W XHP 120 120 W Available September 2013 Soldering Technical Data WX 1 WX 2 Dimension L x B x H 170 x 151 x 130 mm (6,69 x 5,94 x 5,12 inch) Weight ca. 3,2 kg Channels 1 Power supply 230 V | 50 Hz Power consumption 200 W Protection class Temperature range 200 W (255 W) I Adjustable 50-550 C (150-999 F); adjustable temperature range varies among tools Temperature accuracy 9 C ( 17 F) Temperature stability 2 C ( 4 F) Equipotentional bonding Via 3,5 mm pawl socket on back of device Material touch panel Made of antistatic coated material (glas) Dimensions touch panel 74 x 38 mm Resolution 255 x 127 (128) dots Display backlighting yes Equipotentional bonding 2 The 3.5 mm switch box offers four different options: a) Hard grounded without plug (original delivery) b) Equipotential bonding: with plug, compensationg line on center contact c) Potential free: with plug d) Soft grounded: with plug and soldered resistor grounded via selected resistor USB-interfaceUSB interface in front for firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types 2 further interfaces to connect Weller accessories ESD safe yes Order-no. T005 34 176 99 yes T005 34 206 99 www.labem.pl 15 Soldering Stations Cost savings because only one power unit is needed for different applications Use as benchtop controller saves energy Lowering the running costs by enlarged tip lifetimes Reduction of rework due to optimized tool use and correct working temperature ESD safe ESD The Weller multi tool principle different tools can be connected to the power unit. The intelligent WX tools can be parameterized by means that the parameters are saved individually to the soldering tool. So these tools are connectable to every WX power unit. This saves a lot of time at the workplace. Intelligent power management allows a max. power of 200 W (255 W). A simultanuous use of different tools is possible. For your overview, all active tools can be seen in the display and a LED ringlight show the working status. 4 4 1 WX 2020 Set Power unit WX 2 with 2 channels, 2 soldering irons WXP 120 3 2 XT Soldering tip series page 172/173 Order-no. T005 34 216 99 Model WX 2020 Set Scope of supply: 1 T005 34 206 99 WX 2 2 T005 29 201 99 2 x WXP 120 3 T005 44 704 99 2 x XT B 4 T005 15 121 99 2 x WDH 10 Description Power unit with 2 channels 200 W / 230 V Power unit, 200 W (255 W) Soldering iron 120 W, 24 V with Power-Response Technolgy Standard tip XT B, Chisel 2,4 x 0,8 mm Safety rest with dry cleaner www.labem.pl 16 4 WX 2021 Set 7 1 Power unit WX 2 with 2 channels, soldering irons WXMP and tweezers WMRT 2 3 RT Soldering tip series page 164/165 6 Order-no. Model T005 34 226 99 WX 2021 Set Scope of supply: 1 T005 34 206 99 WX 2 2 T005 29 203 99 WXMP 3 T005 44 603 99 RT 3 4 T005 15 171 99 WDH 51 5 T005 13 177 99 WXMT 6 T005 44 652 99 RTW 2 7 T005 15 169 99 WDH 60 5 Description Power unit with 2 channels 200 W / 230 V Power unit, 200 W (255 W) Micro soldering iron 55 W, 12 V with Active-Tip Technology Standard tip RT 3, Chisel 1,3 x 0,4 mm Safety rest with dry cleaner Micro tweezers 2 x 40 W, 12 V with Active-Tip Technology Standard tip RTW 2, 0,7 x 0,4 mm, 45 Safety rest with dry cleaner Power Unit WX 2 Innovative operation concept Robust touch screen with ESD safe glas Intuitive use with turn-click-wheel with enter key and finger guide. Blue LED backlighting Multilingual menu navigation High functionality No safety rest with Stop & Go function needed thanks to integrated acceleration sensor Optimized precision, better stability by sensor in the soldering iron Specific parameterization of tool by storgage medium in hand piec. Visual process control via blue LED ring light All WX tools connectable Order-no. T005 34 206 99 Model Power unit WX 2 with 2 channels, 200 W (255 W) www.labem.pl 17 Soldering Stations 4 WX 1010 Set 1 Power unit WX 1 with 1 channel, soldering irons WXP 120 2 XT Soldering tip series page 172/173 3 Order-no. T005 34 186 99 Model WX 1010 Scope of supply: 1 T005 34 176 99 WX 1 2 T005 29 201 99 WXP 120 3 T005 44 704 99 XT B 4 T005 15 121 99 WDH 10 Description Power unit with 1 channel, 200 W / 230 V Power unit, 200 W Soldering iron 120 W, 24 V with Power-Response Technology Standard tip XT B, Chisel 2,4 x 0,8 mm Safety rest with dry cleaner 4 WX 1011 Set 1 Power unit WX 1 with 1 channel, micro soldering irons WXMP 2 RT Soldering tip series page 164/165 3 Order-no. T005 34 196 99 Model WX 1011 Scope of supply: 1 T005 34 176 99 WX 1 2 T005 29 203 99 WXMP 3 T005 44 603 99 RT 3 4 T005 15 171 99 WDH 51 Description Power unit with 1 channel, 200 W / 230 V Power unit, 200 W Soldering iron 55 W, 12 V with Active-Tip Technology Standard tip RT 3, Chisel 1,3 x 0,4 mm Safety rest with dry cleaner www.labem.pl 18 Soldering 4 WX 1012 Set 1 Power unit WX 1 with 1 channel, soldering irons WXP 65 2 XNT Soldering tip series page 168/169 Order-no. T005 34 276 99 3 Model WX 1012 Description Power unit with 1 channel, 200 W / 230 V Scope of supply: 1 T005 34 176 99 WX 1 2 T005 29 211 99 WXP 65 3 T005 44 851 99 XNT A 4 T005 15 121 99 WDH 10 Power unit, 200 W Soldering iron 65 W with Power-Response Technology Standard tip XNT A, Chisel 1,6 mm Safety rest with dry cleaner Power Unit WX 1 Innovative operation concept Robust touch screen with ESD safe glas Intuitive use with turn-click-wheel with enter key and finger guide. Blue LED backlighting Multilingual menu navigation High functionality No safety rest with Stop & Go function needed thanks to integrated acceleration sensor Optimized precision, better stability by sensor in the soldering iron Specific parameterization of tool by storgage medium in hand piec. Visual process control via blue LED ring light All WX tools connectable Order-no. T005 34 176 99 Model 1-Channel-Power Unit WX 1 200 W / 230 V Available adapter for WX stations see page 14. www.labem.pl 19 Soldering Stations Take your mark, get set, GO - with SPEED & SAFETY! Systematic Soldering Control units accept wide range of different soldering tools Power ranges from 80 W up to 150 W for micro-fine as well as for robot soldering applications Extensive accessories available: mirco-tweezers, soldering irons and solder baths Easy monitoring via Automatic tool recognition and fast temperature setting via buttons and large LC display Reliablity & Longlife Robust design for continuous operation Small and compact soldering stations with easy-to-read display ESD safe unit with different functions: potential equalization, temp. set-back, stand-by and lock function www.labem.pl 20 ESD Soldering Cost-Effective, Industrial Soldering Station For different applications with a power range from 80 W up to 150 W Fast temperature setting and easy monitoring Easy to use buttons or potentiometer and LED signal Low running costs Industrial housing: easy to clean, robust design High cost saving of consumables; Cost efficient & long life Silver-Line soldering tips reduce running costs www.labem.pl 21 Soldering Stations Photo similar WD 1 WD 1M max. power supply 80 W max. power supply 150 W Silver-Line WP 80 LT Soldering tips WSP 80 LT Soldering tips PUD 81i PUD 81 PUD 151 max. power supply 80 W max. power supply 80 W max. power supply 150 W Available from January 2014 Power-Response PU 81 max. power supply 80 W Standard-Line WP 120 XT soldering tips LR 21 LT Soldering tips WMP NT Soldering tips WTA 50 WTA Tips Active Tip WP 65 XNT Soldering tips WSP 150 LHT Soldering tips Preheating plate WHP 80 MPR 80 LT Soldering tips WMRT RTW Tips FE-Soldering iron FE 75 LT Soldering tips FE 80 HT Soldering tips Solder bath WSB 80 www.labem.pl 22 WMRP RT Soldering tips WSB 150 Soldering Technical Data Photo similar WD 1 WD 1M PUD 81i PUD 81 PUD 151 PU 81 Available from January 2014 Dimension L x B x H 34 x 108 x 147 mm 134 x 108 x 147 mm 1 1 1 1 1 1 Power supply 230 V 230 V 230 V 230 V 230 V 230 V Power consumption 95 W 150 W 95 W 95 W 150 W 95 W I I I I I I 50C - 450C 50C - 450C 50C - 450C Temperature accuracy 9C 9C 9C 9C 11C bei 550C 9C Temperature stability 5C 5C 5C 5C 5C 5C Display LCD LCD LED LED LED no Setting Tasten Tasten Tasten Tasten ESD safe yes yes yes yes Channels Protection class Temperature range 166 x 140 x 103 mm 166 x 115 x 101 mm 166 x 115 x 101 166 x 115 x 101 mm mm 50C - 450C 50C - 550C 150C - 450C Tasten Drehpotentiometer yes yes Equipotentional bondingVia 3,5 mm pawl socket on back of device (normal state hard grounded) USB interface Order-no. yes* yes* no T005 34 006 99 T005 34 156 99 T005 32 956 99 no no T005 32 626 99 T005 32 786 99 no T005 32 526 99 *optional (see page 25) www.labem.pl 23 Soldering Stations Cost reduction - longer tip lifetime due to temperature reduction Automatic tool recognition Easy tip exchange without tools ESD safe ESD Ready, set, go - with perfect accuracy! 1 channel WD soldering station is userfriendly due to the large LC display. 2 special menues for individual settings, e.g. stand-by mode, lock function and many more. 4 WD 1000 Set 1 Power unit 80 W, 1 channel with soldering iron For small sensible components 2 3 LT Soldering tip series page 177-180 Order-no. Model T005 34 026 99 WD 1000 Set Scope of supply: 1 T005 34 006 99 WD 1 2 T005 29 180 99 WP 80 3 T005 44 405 99 LT B 4 T005 15 121 99 WDH 10 Description Soldering station, 1 channel, 80 W / 230 V Power unit, 80 W Soldering iron 80 W, 24 V with Silver-Line Technology Standard tip LT B, Chisel 2,4 x 0,8 mm Safety rest with dry cleaner WD 1000 T Set Power unit 80 W, 1 channel Order-no. Model as WD 1000 Set but with T005 34 026 70 WD 1000 T Set safety rest WDH 10T with Stop & Go function Scope of supply: T005 34 006 99 WD 1 T005 29 180 99 WP 80 LT Soldering tip LT B series page 177-180 T005 44 405 99 T005 15 161 99 WDH 10T Description Soldering station, 1 channel, 80 W / 230 V Power unit, 80 W Soldering iron 80 W, 24 V with Silver-Line Technolgy Standard tip LT B, Chisel 2,4 x 0,8 mm Safety rest with Stop & Go function and with dry cleaner www.labem.pl 24 Soldering WD 1M Power Unit Power unit, 1 channel, digital 150 W / 230 V For micro soldering iron WMRP and micro tweezers WMRT Order-no. T 005 34 156 99 Model WD 1M Description Power Unit 150 W, 230 V Order-no. T005 34 006 99 Model WD 1 Description Power Unit 80 W / 230 V Order-no. T005 31 185 99 Description USB Interface for ISO applications WD 1 Power Unit Power unit, 1 channel, digital 80 W / 230 V For all soldering tools up to 80 W www.labem.pl 25 Soldering Stations Easy handling Very good cost / performance ratio ESD safe ESD Digital soldering stations WSD (Optical set and read temperature display) and WS (set-temperature display) stations Weller WSD and WS stations are cost effective, digital soldering stations with an easy handling. 4 WSD 81i Set Power unit 80 W, 1 channel with soldering iron WSP 80 Many parameter are available with this unit 1 3 2 LT Soldering tip series page 172 Available from January 2014 Order-no. T005 32 976 99 Model WSD 81i Set Scope of supply: 1 T005 32 956 99 PUD 81i 2 T005 29 161 99 WSP 80 3 T005 44 405 99 LT B 4 T005 15 121 99 WDH 10 Description Soldering station, 1 channel 80 W / 230 V Power unit, 80 W Soldering iron 80 W, 24 V with Silver-Line Technology Standard tip LT B,chisel 2,4 x 0,8 mm Safety rest with cleaning sponge Photo similar 4 WSD 81i SE Set Power unit 80 W, 1 channel with soldering iron WP 65 Many parameter are available with this unit 1 2 XNT Soldering tip series page 172 3 Order-no. T005 32 966 99 Available from January 2014 Model Description WSD 81i SE Set Soldering station, 1 channel 80 W / 230 V Scope of supply: 1 T005 32 956 99 PUD 81i 2 T005 29 215 99 WP 65 3 T005 44 851 99 XNT A 4 T005 15 121 99 WDH 10 Power unit, 80 W Soldering iron 65 W, 24 V with Power-Response Technology Standard tip XNT A, chisel 1,6 x 0,4 mm Safety rest with cleaning sponge www.labem.pl 26 Soldering Photo similar PUD 81i Power unit, 1 channel 80 W, 230 V Many parameter are available with this unit Available from January 2014 Order-no. T005 32 956 99 Model PUD 81i Description Soldering station, 1 channel 80 W / 230 V 4 WSD 121 Set Power unit 120 W, 1 channel with soldering iron WP 120 Further parameter with an external calibration unit. WCB 2 possible. See page 84 1 3 XT Soldering tip series page 172/173 Order-no. T005 32 776 70 2 Model WSD 121 Scope of supply: 1 WSD 121 2 T005 29 193 99 WP 120 3 T005 44 704 99 XT B 4 T005 15 170 99 KH 18 T005 15 125 99 WDC 2 Description Soldering station, 1 channel 80 W / 230 V Power unit, 120 W / 230 V Soldering iron 120 W, 24 V with Power-Response Technology Standard tip LTB, chisel 2,4 x 0,8 mm Safety rest with dry cleaner Dry cleaner www.labem.pl 27 Soldering Stations WSD 151 Set 3 Power unit, 1 channel with soldering iron WSP 150 Further parameter with an external calibration unit. WCB 2 possible. See page 84 1 2 LHT Soldering tip series page 183 4 Order-no. T005 32 766 99 Model WSD 151 Set Scope of supply: 1 T005 32 786 99 PUD 151 2 T005 29 170 99 WSP 150 3 T005 44 450 99 LHT F 4 T005 15 027 99 KH 27 Description Soldering station, 1 channel, 150 W / 230 V Power unit, 150 W Soldering iron 150 W, 24 V with Silver-Line Technology Standard tip LHT F, Chisel 9,3 mm Safety rest with cleaning sponge WSD 151 Power Unit Power unit 150 W, 1 channel Further parameter with an external calibration unit. WCB 2 possible. See page 84 Order-no. T005 32 786 99 Model WSD 151 Description Power unit 150 W, 240 V 4 WSD 81 Set Power unit 80 W, 1 channel with soldering iron WSP 80 Further parameter with an external calibration unit. WCB 2 possible. See page 84 LT Soldering tip series page 177-180 1 2 3 Order-no. T005 32 606 99 Model WSD 81 Set Scope of supply: 1 T005 32 626 99 PUD 81 2 T005 29 161 99 WSP 80 3 T005 44 405 99 LT B 4 T005 15 140 99 WPH 80 Description Soldering station, 1 channel, 80 W / 230 V Power unit, 150 W Soldering iron 80 W, 24 V with Silver-Line Technology Standard tip LT B, Chisel 0,8 mm Safety rest with cleaning sponge www.labem.pl 28 Soldering 4 WS 81 Set Power unit, 1 channel with soldering iron WSP 80 1 LT Soldering tip series page 177-180 3 2 Order-no. Model T005 32 506 99 WS 81 Set Description Soldering station, 1 channel, 80 W / 230 V, analog Scope of supply: 1 T005 32 526 99 PU 81 2 T005 29 161 99 WSP 80 3 T005 44 405 99 LT B 4 T005 15 170 99 KH 18 Power unit, 80 W, analog Soldering iron 80 W, 24 V with Silver-Line Technolgy Standard tip LT B, Chisel 2,4 x 0,8 mm Safety rest with cleaning sponge Order-no. Model T005 32 524 99 PU 81 Description Power unit switchable, 80 W, 120 V / 240 V with US plug, analog PU 81 Power Unit Power unit 80 W Further parameter with an external calibration unit. WCB 2 possible Accessory: T005 87 489 90 Key switch with control panel www.labem.pl 29 Soldering Stations Easy handling Good cost / performance ratio ESD Ferro Magnetic Controlled Soldering Station (Magnastat) The Weller Magnastat system operates through a ferro-magnetic device which changes its characteristics when specific temperatures are reached. This causes it to either attract or repel a permanent magnet which operates a power supply switch. In this way power to the heating element can be quickly switched on or off to either provide extra power for soldering operations or reduced power when idling. Various preselected tip temperatures (260C, 310C, 370C, 425C, 480C) are available for different soldering tasks. The unit is not suitable for ESD application because the iron is not antistatic. Technical Data Dimension L x B x H: WTCP 51 166 x 115 x 101 Channels: Power supply: Power consumption Heating voltage: Soldering iron: 1 230 V (240 V, 120 V), 50 (60) Hz 55 W 24V, 50 (60) Hz max. 50 W at 24 V Display: Temperature control: no two-level controller Equipotentional bonding: yes USB interface: no Control: Order-no. two-level controller with temperature sensor T0053220699 www.labem.pl 30 Soldering 1 WTCP 51 Set Power unit, 1 channel with soldering iron TCPS 4 LT Soldering tip series page 177-180 3 Order-no. T005 32 206 99 Model WTCP 51 Set 2 Description Soldering station, 1 channel, 50 W / 230 V Scope of supply: 1 T005 32 226 99 P 51 2 T005 32 105 99 TCPS 3 T005 44 415 99 LT M 4 T005 15 020 99 KH 20 Power unit, 50 W Soldering iron 50 W, 24 V with Silver-Line Technolgy Standard tip LT M, Chisel 2,0 x 0,8 mm and PT-LT adapter Safety rest with cleaning sponge Order-no. Model T005 32 224 99 P 51 Description Power unit switchable, 50 W, 120 V / 240 V with US plug P 51 Power Unit Power unit switchable, 50 W, 120 V / 240 V with US plug For all tools upto 50 W except WMRP and WMRT www.labem.pl 31 Special application for use in solder robots The soldering station PUD 151R is suitable for soldering tasks in industrial manufacturing in which the soldering process is to be automated. For this purpose the unit is equipped with a monitoring circuit. As function of an adjustable temperature window (tolerance band) an un-powered contact is reduced to a low impedance. Straight forward, easy operation is made possible with the usage of a micro processor. Digital control electronics ensure optimal regulation behaviour with different soldering irons upto 150 W. The soldering irons are automatically recognized by the soldering station and assigned the apropriate control parameter. ESD www.labem.pl 32 Soldering Technical Data WX 1 Dimension L x B x H WX 2 170 x 151 x 130 mm (6,69 x 5,94 x 5,12 inch) Weight PUD 151R 166 x 115 x 101 mm ca. 3,2 kg Channels 1 2 Power supply 230 V | 50 Hz Power consumption 200 W (255 W) Protection class I Temperature range Adjustable 50-550 C (150-999 F); adjustable temperature range varies among tools Temperature accuracy 9 C ( 17 F) Temperature stability 2 C ( 4 F) Equipotentional bonding 1 230 V 150 W 1 150C - 550C 9C ( 11C bei 550C) 5C ( 9 F) Via 3.5 mm pawl socket on back of device (normal state hard grounded) Material touch panel Made of antistatic coated material (glas) - Dimensions touch panel 74 x 38 mm - Resolution 255 x 127 (128) dots - Display backlighting yes LED Equipotentional bonding The 3.5 mm switch box offers four different options: a) Hard grounded without plug (original delivery) b) Equipotential bonding: with plug, compensationg line on center contact c) Potential free: with plug d) Soft grounded: with plug and soldered resistor grounded via selected resistor USB-interface USB interface in front for firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types No 2 further interfaces to connect Weller accessories - ESD safe Order-no. yes yes T005 34 176 99 T005 34 206 99 yes T005 32 786 70 www.labem.pl 33 Special application for use in solder robots PUD 151R Temperature window adjustable 99C Temperatur control via buttons 3-position digital display Calibration unit WCB 2 connectable (see page 84) Automatic tool recognition Digitally controlled electronic for soldering tools upto 150 W Order-no. T00 32 786 70 Model PUD 151R Description Power unit, 1 channel, 150 W www.labem.pl 34 Soldering HER 80 Heating element Order-no. Model T005 87 447 38 HER 80 Description Heating element 80 W for solder robots applications with PUD 151R LT Soldering tips for HER 80 Order-no. Model T005 44 441 99 LTR A T005 44 422 99 LTR B T005 44 422 71 LTR B T005 44 433 99 LTR C Special tips on request Description Width Thickness Soldering tips for HER 80 with twist lock Chisel tip 1,6 mm 0,8 mm Chisel tip 1,5 mm wettable 2,4 mm 0,8 mm Chisel tip 6,0 mm wettable 2,4 mm 0,8 mm Chisel tip 3,2 mm 0,8 mm Length 17 mm 17 mm 17 mm 17 mm HER 120 Heating element Order-no. Model T005 87 637 30 HER 120 Description Heating element 120 W for solder robot application with PUD 151R HERX 120 Heating element Order-no. Model T005 87 657 40 HERX 120 Description Heating element 120 W for solder robot application with WX 1 / WX 2 XTR Soldering tips for HER 120 and HERX 120 Order-no. Model T005 44 723 99 XTR A T005 44 724 99 XTR B T005 44 725 99 XTR C T005 44 726 99 XTR D T005 44 727 99 XTR E T005 44 728 99 XTR M Description Width Thickness Soldering tips for HER 120 with twist lock Chisel tip 1,6 mm 0,7 mm Chisel tip 2,4 mm 0,8 mm Chisel tip 3,2 mm 0,8 mm Chisel tip 4,6 mm 0,8 mm Chisel tip 5,9 mm 1,2 mm Chisel tip 3,2 mm 1,2 mm Length 36,0 mm 35,0 mm 35,0 mm 34,5 mm 34,5 mm 39,0 mm Cord for HER 80 / 120 and HERX 120 Order-no. Model T005 87 447 13 T005 87 657 15 Description Cord for HER 80 / 120, 1,6 m Cord for fur HERX 120, 1,6 m www.labem.pl 35 Special Application Inert Gas Soldering Ideal solution for soldering application under an atmosphere of inert gas Advantages of inert gas soldering Oxygen will be blocked out from solder joint and soldering tip * less oxidation on solder joint and soldering tip * less surface tension of solder * better flow characteristics of solder Preheating of solder joints ESD safe Better and consistant activation of flux ESD The inert gas soldering irons WP 80IG and WP 120IG achive all ESD requirements and enables soldering jobs with inert gas in used way. Inert gas is fed through openings in the heating element to envelop the solder joint. Inert gas and temperature control via power unit WAD 101IG. The set is complete with the Stop & Go safety rest WDH 10P. Technical Data Dimension L x B x H: Weight WAD 101IG 166 x 115 x 101 3,335 kg Channels Power supply Power consumption Protection class Temperature range Adjustable Temperature range 1 230 V / 120 V (50/60 Hz) 150 W 1 Power unit, 3 Soldering irons, Soldering and desoldering irons adjustable 50C - 550C (150F - 999F) depends on tool Temperature accuracy 2C Temperature stability 5C Potential free contact Optocoupler (transistor output) max. 24 V / 20mA; Pin 1 (+), Pin 2 (-) Display Temperature control Via buttons ESD safe Equipotentional bonding yes Via 3.5 mm pawl socket on back of device USB interface Order-no. no T005 32 666 71 www.labem.pl 36 Soldering WAD 101IG Order-no. T005 32 666 71 Model Description WAD 101IGPower unit, 1 channel 150 W for soldering with inert gas Perfect solution for lead free soldering applications under an atmosphere of inert gas With the WSP 80 inert gas safety rest set the WSP 80 soldering iron can be switched to an inert gas soldering iron. The safety rest WDH 10P can be used with the WSP 80IG and WP 120IG. Inert gas is fed through openings in the heating element to envelop the solder joint. Accessory Order-no. Model T005 29 197 99 WP 80IG Description Soldering iron 80 W for soldering with inert gas 50 C - 450 C Order-no. Model T005 29 198 99 WP 120IG Description Soldering iron 80 W for soldering with inert gas 50 C - 450 C Order-no. Model T005 15 161 99 WDH 10T Description Safety rest with Stop & Go function with dry cleaner Order-no. Model T005 87 637 32 Description Barrel WP120IG WDH 10P Set Safety rest WDH 10P with inert gas barrel set for soldering iron WSP 80 80 W, 24 V Lead free soldering LT Soldering tip series page 177-180 Order-no. Model T005 15 147 99 WDH 10P Set Scope of supply: WDH 10P www.labem.pl Description Inert gas safety rest set 80 W, 24 V Safety rest for use with inert gas, ball valve, compressed air hose, 4 mm Inert gas barrel for WSP 80 37 Special application solder feeder Smooth proportion of solder by automatical solder feeder system 3.hand" for easy handling ESD The WSF 81D is a soldering station with an automatic solder feeder system. There are 2 suitable solder diameter. The WSF 81D8 is qualified for solder diameter from 0,8 mm - 1,5 mm, the WSF 81D5 fits from 0,5 mm - 0,8 mm. The adjustment to the exact diameter is automatically with both stations. The operator can switch between automatic and continuous solder supply. The power unit is fitted with digital electronics for regulation the soldering iron temperature and solder feed operation. In the feeder unit a solder reel holder can host coils upto max. 1 kg. Technical Data WSF 81D8 WSF 81D5 Dimension L x B x H 120 x 217 x 199 mm Channels 1 Solder o 0,8 - 1,5 mm Power supply 230 V / 120 V (50/60 Hz) Power consumption 95 W Protection class 1 Power unit, 3 Soldering irons Temperature range 150C - 450C Adjustable Temperature range digital control Tools recognition automatically Display 3 position digital display Temperature control Via buttons ESD safe yes Equipotentional bonding normal state hard grounded USB interface no Order-no. T005 28 226 99 www.labem.pl 38 o 0,5 - 0,8 mm T005 28 206 99 Soldering 1 4 2 WSF 81D5 Solder Feeder System For solder wire from O 0,5 mm upto 0,8 mm 3 LT Soldering tip series page 177-180 Order-no. Model T005 28 206 99 WSF 81D5 Description Solder feeder system 80 W for wire from O 0,5 mm upto 0,8 mm Scope of supply: 1 2 T005 28 116 99 WSF 2 3 T005 28 121 99 WSFP 5 4 T005 15 028 99 AK S Power Unit Feeding unit Soldering iron 80 W, 24 V with soldering tip LT HX Safety rest with cleaning sponge Accessory: T005 13 120 99 T005 87 328 48 T005 87 328 50 T005 87 328 73 T005 87 328 74 Foot switch 1-step Soldering nozzle straight o 0,5 x 52LG F. WSF P5 Soldering nozzle straight o 0,8 x 52LG F. WSF P5 Soldering nozzle straight o 0,5 x 62LG F. WSF P5 Soldering nozzle straight o 0,8 x 62LG F. WSF P5 WSF 81D8 Solder Feeder System For solder wire from O 0,8 mm upto 1,5 mm LT Soldering tip series page 177-180 Order-no. Model T005 28 226 99 WSF 81D8 Description Solder feeder system 80 W for wire from O 0,8 mm upto 1,5 mm Scope of supply: T005 28 116 99 WSF 2 T005 28 122 99 WSFP 8 T005 15 028 99 AK S Power Unit Feeding unit Soldering iron 80 W, 24 V with soldering tip LT BX Safety rest with cleaning sponge Accessory: T005 13 120 99 T005 87 328 32 T005 87 328 34 T005 87 328 35 T005 87 328 36 www.labem.pl Foot switch 1-step Soldering nozzle straight o 1,5 x 63LG F. WSF P/P8 Soldering nozzle straight o 1,5 x 52LG F. WSF P/P8 Soldering nozzle straight o 1,0 x 52,5LG F. WSF P/P8 Soldering nozzle straight o 1,0 x 63LG F. WSF P/P8 39 Special Applications Mobile Soldering Heated uptime within 4 seconds only Cordless soldering capacity upto 1 hour Precise temperature control Easy use via touch sensor ESD safe ESD Soldering without plug WSM 1C: first professional rechargeable soldering station for mobile use. The WSM 1C from Weller is a perfect soldering station when a small mobile tool is required which works absolutey professional. Technical Data Dimension L x B x H (inch / mm): Weight: Power supply: Power consumption: WSM 1C 5.24 x 4.33 x 2.17 | 133 x 110 x 55 mm ca. 2,0 kg 100 V to 240 V 50 Hz to 60 Hz 50 W Safety class (with switching power supply) II (battery powered) III Temperature control 100C - 400C (200F - 750F) Temperature accuracy 9C ( 17F) Temperature stability 5C ( 9F) Acceleration sensor: Efficient stand-by mode Equipotentional bonding: via 3,5 mm pawl socket on side of device Display: Touch-Sensor-Technology Operating temperature: 10C - 35C (50F - 95F) Stock temperature: 24C - 45C (75F - 113F) Air humidity: 0% - 90%, no condensation - Latest LiFePO4 battery technology - Fixed micro soldering iron WMRP - Stop & Go function: automatic switch-off of the soldering iron by motion sensor - Temperature lock function - Car adapter www.labem.pl 40 Soldering 4 WSM 1C Rechargeable soldering station 1 Solution for service technician 50 W 2 3 RT Soldering tip series page 164/165 Order-no. Model T005 32 936 99 WSM 1C Description Rechargeable soldering station with mirco soldering iron WMRP and soldering tip RT 3, chisel 1,3 mm and safety rest with dry cleaner. Recharged in 20 minutes. Accessory Order-no. T005 87 518 80 Description Car adapter for recharge via 12 V board net www.labem.pl 41 Special Applications Mobile Soldering For small mobile soldering application Cost effective Easy to recharge via butane gas Butane Gas Powered Soldering Irons Powered by butane gas, the Pyropens offer soldering iron, hot air blow and blow torch operations. They have a short heat up time and are refilled in seconds from a refill cylinder. A small glass window shows the level of gas in the reservoir. The temperature variation is obtained by increasing or decreasing the gas flow. All Pyropen soldering irons need very clean refill for precise temperature regulation. 6 Pyropen Piezo With self ignition (Piezo) Set in metal box Soldering tip series 70 for Pyropen Piezo page 193 8 9 7 2 3 5 4 1 Order-no. Model T005 16 059 99 Pyropen Piezo Scope of supply: 1 2 T005 16 121 99 70-01-02 3 T005 16 142 99 70-01-52 4 T005 16 159 99 70-01-55 5 T005 16 160 99 RB-TS 6 T005 16 156 99 7040U 7 T005 16 281 99 7042 8 9 Description Pyropen butane gas powered profi line soldering iron (self ignition) Soldering iron Pyropen Piezo Chisel tip 3,0 mm Hot air nozzle O 4,9 mm Reflector unit O 6,0 mm Gas refill canister 75 ml Metal box Burn proof accessory pocket Iron holder Cleaning sponge 6 Pyropen Ignition via lighter Set in metal box Soldering tip series 70 for Pyropen Piezo page 193 8 9 7 2 4 3 5 1 Order-no. Model T005 16 060 99 Pyropen Scope of supply: 1 2 T005 16 121 99 70-01-02 3 T005 16 142 99 70-01-52 4 T005 16 151 99 70-07TU 5 T005 16 160 99 RB-TS 6 T005 16 156 99 7040U 7 T005 16 281 99 7042 8 9 Description Pyropen butane gas powered profi line soldering iron Soldering iron Pyropen Chisel tip 3,0 mm Hot air nozzle O 4,9 mm Torch ejector Gas refill canister 75 ml Metal box Burn proof accessory pocket Iron holder Cleaning sponge www.labem.pl 42 3 Manual ignition Pen shape Soldering tip series 71 for Pyropen Jr. page 192 Soldering Pyropen Jr. 2 1 Order-no. T005 16 075 99 Model Pyropen Jr. Scope of supply: 1 Pyropen Junior 2 T005 16 165 99 70-01-01 3 Description Butane gas powered mini soldering iron Soldering iron Needle tip O 1,0 mm Aluminium protection cap 5 WP 60K 1 3 Manual ignition Set with soldering tip, hot air nozzle and knife Soldering tip series 60 page 192 2 Order-no. T005 16 087 99 Scope of supply: 1 2 T005 16 134 99 3 T005 16 447 99 4 T005 16 135 99 5 T005 16 450 99 4 Model WP 60K Description Butane gas powered soldering iron WP 60 60-01-05 60-01-52 60-01-06 60-02 Soldering iron Needle tip O 0,5 mm Hot air nozzle O 4,7 mm Hot knife 5,0 mm, 45 Protection cap Model RB-TS Description Butane gas refill canister Refill Canister Order-no. T005 16 160 99 www.labem.pl 43 Rework - Soldering, Desoldering and Hot Air The Repair Professionals with Multi-Channel Flexibility! Energy Savings & Environmental Protection Low running costs with flexible use of tools & process controlled, stabile working temperatures Energy efficient repair processes with longer tip & nozzle lifetime Stand-by mode for desoldering tool Energy saving desoldering Low Investment Costs Cost effective soldering process with Automatic tool recognition guarantees safe & simultaneous operation of up to 3 tools Fully integrated multi-channel unit saves investment costs & workbench space WR 3M www.labem.pl 44 Soldering Desoldering Hot Air WR 2M Flexible Solution for All Soldering & Desoldering Applications One power unit for all rework applications: compact, multichannel unit more cost effective compared to single units High flexibility with various connectable tools: Soldering and desoldering irons, hot air irons, preheating plates, wire strippers and solder baths Safe Soldering & Desoldering Operations ESD safe in accordance with all industrial & military standards worldwide ESD www.labem.pl 45 Rework - Soldering, Desoldering and Hot Air WR 3M max. power supply 360 W Active Tip Power-Response WMRP RT Soldering tips Standard-Line WMP NT Soldering tips LR 21 LT Soldering tips WMRT RTW Tips WP 65 XNT Soldering tips WTA 50 WTA Tips WP 120 XT Soldering tips WP 200 XHT Soldering tips Accessory Silver-Line WP 80 LT Soldering tips WVP WSP 150 LHT Soldering tips Accessory MPR 80 LT Soldering tips WRK www.labem.pl 46 Soldering WR 2 FE-Soldering Iron Hot Air Iron FE 75 LT Soldering tips HAP 200 Hot air nozzles FE 80 HT Soldering tips HAP 1 Hot air nozzles Hot Air Desoldering Iron Desoldering max.power supply 250 W DXV 80 DX Nozzles DSX 80 DX Nozzles DSX 120 XDS Nozzles Preheating Plate Stripping Tool WHP 80 WST 82 Solder Bath WSB 80 WSB 150 www.labem.pl 47 Rework - Soldering, Desoldering and Hot Air One station meets the requirements of a rework workplace Unique connecting compatibility of all tools 3 respectively 2 independend tool channels with automatic tool recognition guarantee the simultanuous operation of 2 to 3 soldering tools. Tools are permanentely ready for use ESD www.labem.pl 48 Soldering Technical Data WR 2 273 x 235 x 102 mm Weight: ca. 6,7 kg Channels 3 2 Net supply 230 V 230 V Power supply 400 W 300 W Protection class 1 Power unit, 3 Soldering irons Fuse T500 mA (230 V / 50/60 Hz) Fuse: overcurrent release 2 A Hot Air Dimension L x B x H Desoldering WR 3M 1,6 A Temperature control of channels Soldering- and desoldering irons continuously 50C - 550C (150F - 999F) Temperature control range depends on tool Soldering iron WP 80 / WP 120: 50C - 450C (150F - 850F) Soldering iron WP 200 / WSP 150: 50C - 550C (150F - 950F) Soldering iron WMRT / WMRP (only WR 3M): 100C - 450C (200F - 850F) Desoldering iron DSX 80 / DXV 80: 50C - 450C (150F - 850F) Desoldering iron DSX 120: 50C - 450C (150F - 850C) Hot air irons HAP 200 (only WR 3M) / HAP 1: 50C - 550C (150F - 950C) Temperature accuracy 9C Temperature stability 2C Bleeder Soldering tip (Tip to ground) IPC-J-001 conform Bleeder voltage Soldering tip (Tip to ground) IPC-J-001 conform Pump (periodic duty 30/30 s) Max. vacuum 0,7 bar Max. delivery rate max. 18 l/min max. 18 l/min Hot Air max. 15 l/min max. 10 l/min Display LCD Temperature control Buttons ESD safe yes yes Equipotentional bonding Via 3.5 mm pawl socket at the back of device (hard grounded normal state) USB interface Order-no. yes T005 33 666 99 no T005 33 776 99 www.labem.pl 49 Rework - Soldering, Desoldering and Hot Air WR 3000M Set Power unit, 3 channels with soldering iron WP 80, desoldering iron DSX 80 and hot air iron HAP 200 Large allround set for all repair jobs Desoldering iron DSX 80 for horizontal applications 4 9 1 3 5 10 2 Model Description WR 3000M Set Rework station, 3 channels WR 3M Scope of supply: 1 T005 33 666 99 WR 3M 2 T005 29 180 99 WP 80 3 T005 44 405 99 LT B 4 T005 15 161 99 WDH 10T 5 T005 13 190 99 DSX 80 6 T005 13 150 00 DX 113HM 7 T005 15 152 99 WDH 30 8 T005 27 116 99 HAP 200 9 T005 15 152 99 WDH 30 10 T005 29 184 99 WVP WR 3000M Set for vertical applications 6 4 1 3 10 7 9 2 Order-no. T005 33 683 99 50 Power unit, 360 W Soldering iron, 80 W with Silver-Line Technolgy Standard tip LT B, Chisel 2,4 x 0,8 mm Safety rest with Stop & Go function and dry cleaner Desoldering iron, 80 W Nozzle Safety rest for DSX 80 with dry cleaner Hot air iron, 200 W Safety rest for hot air iron HAP 200 with dry cleaner Vacuum pick-up Software 8 Power unit, 3 channels with soldering iron WP 80, desoldering iron DXV 80 and hot air iron HAP 200. Desoldering iron DXV 80 for vertical applications LT Soldering tip series page 177-180 Hot air nozzles page 198-204 DX Nozzle page 194 6 8 Order-no. T005 33 686 99 LT Soldering tip series page 177-180 Hot air nozzles page 198-204 DX Nozzle page 194 7 5 Model Description WR 3000M Set Rework station, 3 channels WR 3M Scope of supply: 1 T005 33 666 99 WR 3M Power unit, 360 W 2 T005 29 180 99 WP 80 Soldering iron, 80 W with Silver-Line Technolgy 3 T005 44 405 99 LT B Standard tip, Chisel 2,4 x 0,8 mm 4 T005 15 161 99 WDH 10T Safety rest with Stop & Go functions for WP 80 5 T005 13 180 99 DXV 80 Inline desoldering iron, 80 W 6 T005 15 153 99 WDH 40 Safety rest for desoldering iron DXV 80 7 T005 27 116 99 HAP 200 Hot Air Iron, 200 W 8 T005 15 152 99 WDH 30 Safety rest for hot air irons HAP 200 9 T005 29 184 99 WVP Vacuum pick-up DX 113HM Desoldering tip 10 T005 13 150 00 www.labem.pl Software Soldering WR 3000MER 4 9 7 1 3 8 Desoldering Power unit, 3 channels with soldering iron WP 120, desoldering iron DSX 120 and hot air iron HAP 200 Large allround set for all repair jobs Desoldering iron DSX 120 for horizontal applications 6 5 2 LT Soldering tip series page 172-173 Hot air nozzles page 198-204 XDX Nozzle page 197 Scope of supply: 1 T005 33 666 99 WR 3M 2 T005 29 193 99 WP 120 3 T005 44 704 99 XT B 4 T005 15 121 99 WDH 10 5 T005 13 198 99 DSX 120 6 T005 15 152 99 WDH 30 7 T005 27 116 99 HAP 200 8 T005 15 152 99 WDH 30 9 T005 87 658 01 PDN Hot Air Order-no. Model Description T005 33 688 11 WR 3000MER Set Rework station, 3 channels WR 3M Power unit, 360 W Soldering iron, 120 W, 24 V with Power-Response Technolgy Standard tip XT B, chisel 2,4 x 08 mm Safety rest with Stop & and dry cleaner Desoldering iron, 120 W, 24 V Safety rest with dry cleaner Hot air iron, 200 W Safety rest with dry cleaner Pliers Desoldering Nozzle Accessories for both WR 3000M sets Order-no. Description T005 87 388 50 T005 13 120 99 T005 29 184 99 T005 87 658 01 Adapter for foot switch 1 step foot switch WVP Vacuum pick-up PDN Pliers Desoldering Nozzle www.labem.pl 51 Rework - Soldering, Desoldering and Hot Air HAP 200 Set Temperature range from 50C - 550 Hot air flow adjustable Activation of hot air flow via finger switch For WR 3M only Nozzles page 198-204 2 1 3 Order-no. T005 27 117 99 Model HAP 200 Set Scope of supply: 1 T005 27 116 99 HAP 200 2 T005 15 152 99 WDH 30 3 T005 87 278 21 R 04 T005 87 617 28 T005 87 278 22 R 06 Description Hot air iron set 200 W, 24 V Hot air iron 200 W / 24 V with hot air nozzle R 06 round O 3,0 mm Safety rest Hot air nozzle round O 1,2 mm Adapter M6 for HAP 200 Hot air nozzle round O 3,0 mm www.labem.pl 52 Soldering 4 1 5 2 DX Nozzles page 194 LT Soldering tip series page 177-180 7 3 Order-no. T005 33 806 99 6 Model WR 2002 Set Scope of supply: 1 T005 33 776 99 WR 2 2 T005 29 180 99 WP 80 3 T005 44 405 99 LT B 4 T005 15 121 99 WDH 10 5 T005 13 150 00 DX 113 HM 6 T005 13 190 99 DSX 80 7 T005 15 152 99 WDH 30 Hot Air Power unit, 2 channels with soldering iron WP 80, desoldering iron DSX 80 Small repair set for all rework applications Simultaneous operation of hot air and desoldering iron is not possible. Desoldering WR 2002 Set Description Rework station, 2 channels WR 2 Power unit Soldering iron 80 W with Silver-Line Technolgy Standard tip LT B, Chisel 2,4 x 0,8 mm Safety rest with dry cleaner Nozzle inner-O 1,2 mm Desoldering iron 80 W / 24 V Safety rest with dry cleaner Power cable Equipotential bonding connector www.labem.pl 53 Soldering and Desoldering Stations The BEST of the very BEST! Two Channel, High Power Soldering & Desoldering High power soldering & desoldering tools Simultaneous running of two 120 W, intelligent WX tools Process parameters are stored directly on the soldering or desoldering tool Process controlled, stabile working temperatures Flexible & fast modification of workplace possible ESD Ergonomics & Safety Less Maintenance Single-handed, easy & safe change of solder reservoir via bayonet & cardboard solder cartridge - not hot to handle! Fatigue-reduced, gentle work possible and safe handling by the latest ergonomic grip-design Compressed air system for stable desoldering & high vacuum Fast and easy filter change Cost Savings Extremely fast heat-up time of desoldering iron in only 40 sec. from 50C up to 350C! Stand-by mode of desoldering iron saves energy & tip life Easy and fast setting of tool parameters with WX technology via ESD safe touch screen www.labem.pl 54 Soldering Flexible Solutions for professional soldering & desoldering applications Desoldering One power unit for various rework applications; Compact set more cost effective compared to single units High flexibility with various connectable tools: Soldering and desoldering irons, hot air irons, preheating plates, wire strippers and solder baths. Low Investment Costs Cost effective soldering process with automatic tool recognition guarantees safe operation of both irons Fast & safe soldering and desoldering Fully integrated multi-channel unit saves investment costs & workbench space www.labem.pl 55 Soldering and Desoldering Stations WXD 2 Power-Response Desoldering iron WXP 65 XNT Soldering tips WXDP 120 XDS Nozzles WXP 120 XT Soldering tips Soldering bathes WXDV 120 XDS Nozzles Available September 2013 WXP 200 XHT Soldering tips WXSB 200 Available September 2013 DXV 80 DX Desoldering nozzles Active Tip WX Adapter WXMP RT Soldering tips WX Adapter for PC T005 87 647 11 DSX 80 DX Desoldering nozzles WXMT RTW Tips Fume Extraction WX Adapter for Zero Smog T005 87 647 12 Preheating plates Zero Smog 4V Zero Smog 6V Zero Smog 20T WX Connection cable T005 87 647 10 Options for adapter connections see page 14. www.labem.pl 56 DSX 120 XDS Desoldering nozzles WHP 1000 WHP 3000 600 W WHP 3000 1200 W W XHP 120 120 W Available September 2013 Power-Response Soldering Desoldering WR 2 Standard-Line WMP NT Soldering tips Silver-Line LR 21 LT Soldering tips WP 65 XNT Soldering tips WP 80 LT Soldering tips WP 120 XT Soldering tips WSP 150 LHT Soldering tips WP 200 XHT Soldering tips MPR 80 LT Soldering tips WTA 50 WTA Tips Hot air iron Preheating plate HAP 1 Hot air nozzles Wire Stripper FE-Soldering Iron WHP 80 WST 82 FE 75 LT Soldering tips FE 80 HT Soldering tips Solder bathes WSB 80 WSB 150 www.labem.pl 57 Soldering and Desoldering Stations ESD ESD WXD 2 Cost effective because only one station is needed Less rework by optimal use of tools and the correct working temperature. Reduction of running costs by longer tip lifetime Desoldering iron with stand-by mode ESD safe WR 2 Only one station that meets all rework requirements Unique compatibility Many tools are connectable (except WX tools) 2 independent channesl with automatic tool recognition guarantees simultanuous operation of 2 tools ESD safe www.labem.pl 58 Soldering Technical Data WXD 2 Weight: Channels 170 x 151 x 130 mm 273 x 235 x 102 mm 3,8 kg ca. 6,7 kg 2 2 Power supply 230 V 230 V Power supply 200 W (255 W) 300 W Protection class Fuse 1 power unit, 3 Soldering irons T2 A Fuse: overcurrent release 1,6 A Temperature accuracy 9C Temperature stability 2C Bleeder Soldering tip (Tip to ground) IPC-J-001 conform Bleeder voltage Soldering tip (Tip to ground) IPC-J-001 conform Vacuum source via Venturi Air consumption 35l/min max vacuum 55 kPal (8 psi) Pump max. pressure 0,7 bar periodic duty 30/30 s Hot Air - max. 15 l/min Display LCD LCD Touch Keys yes yes Temperature control ESD safe Equipotention bonding USB interface Order-no. Desoldering Dimension L x B x H WR 2 Via 3.5 mm pawl socket (hard grounded normal state) yes no T005 34 266 99 T005 33 776 99 www.labem.pl 59 Soldering and Desoldering Stations New products enlarge the WX family. A new WXD 2 desoldering station and a new WXDP desoldering iron. These tools are ideal for professional rework applications of the latest electronic components in the industrial operation. Typically for the WX stations: soldering and desoldering parameters can be saved easily on the iron. The WXDP 120 heats up within 35 sec. only. With stand-by function. WXD 2010 Desoldering station, 2 channels digital and electronically controlled with desoldering iron WXDP 120 Soldering- and desoldering tools with intelligent WX technology 1 Connection to external compressed air supply for high vacuum Energy effective: automatic stand-by mode for tools Patented, ESD safe glass display. Simple and fast setting of soldering parameter. Order-no. Model T005 34 286 99 WXD 2010 Set Scope of supply: 1 T005 34 266 99 WXD 2 2 T005 13 201 99 WXDP 120 3 T005 15 172 99 WDH 70 XDS Nozzle-series 4 T005 13 250 99 XDS 1 page 197 T005 87 658 01 PDN 3 4 2 Description Solder- and Desoldering station, 2 channels 200 W (255 W) Power Unit Desoldering iron 120 W, 24 V Safety rest with dry cleaner Nozzle Desoldering pliers 4 WXD 2020 1 Soldering and desoldering station, 2 channels with WXDP 120 and soldering iron WXP 120 XT Soldering tip series page 172-173 XDS Nozzle-series page 197 3 2 Order-no. Model T005 34 296 99 WXD 2020 Set Scope of supply: 1 T005 34 266 99 WXD 2 2 T005 13 201 99 WXDP 120 3 T005 13 250 99 XDS 1 4 T005 15 172 99 WDH 70 5 T005 29 202 99 WXP 120 6 T005 44 704 99 XT B 7 T005 15 121 99 WDH 10 T005 87 658 01 PDN 6 5 Description Solder- and Desoldering station, 2 channels 200 W (255 W) Power Unit Desoldering iron 120 W, 24 V Nozzle Safety rest with dry cleaner Soldering iron Standard soldering tip, chisel 2,4 x 0,8 mm Safety rest with dry cleaner Desoldering pliers www.labem.pl 60 7 Soldering Desoldering 4 WR 2000D 1 Power unit, 2 channels with desoldering iron DSX 80 and safety rest WDH 30. Repair kit for soldering and desoldering 3 2 DX Soldering tip series page 194 Order-no. T005 33 796 99 Model WR 2000D Description Desoldering station, 2 channels, 250 W Scope of supply: 1 T005 33 776 99 WR 2 2 T005 13 190 99 DSX 80 3 T005 13 150 00 DX 113 HM 4 T005 15 152 99 WDH 30 Power unit Desoldering iron 80 W / 24 V Nozzle inner-O 1,2 mm Safety rest with dry cleaner Power cable Equipotential bonding (normal state hard grounded) 6 WR 2000ER Power unit, 2 channels with desoldering iron DSX 80, soldering iron WP 65 and safety rests WDH 10 & WDH 30. Repair kit for soldering and desoldering XDS Nozzle Series page 197 XNT Soldering tip series page 168/169 7 1 2 5 Order-no. T005 33 808 99 4 Model WR 2000ER Scope of supply: T005 33 776 99 WR 2 T005 13 198 99 DSX 120 T005 13 250 99 XDS 1 T005 29 215 99 WP 65 T005 44 851 99 XNT A T005 15 121 99 WDH 10 T005 15 152 99 WDH 30 T005 87 658 01 PDN 1 2 3 4 5 6 7 3 Description Desoldering station 2 channels, 250 W Power unit Desoldering iron 120 W / 24 V Nozzle Soldering iron 65 W, 24 V Soldering tip Safety rest with dry cleaner Safety rest with dry cleaner Desoldering pliers Power cable Equipotential bonding (normal state hard grounded) www.labem.pl 61 Soldering Hot Air Stations More than just hot air... Small power unit Small and compact housing This station is easy to integrate to the workplace and supports the organization of soldering processes. Best soldering results Electronically controlled hot air station. Best soldering results with inert gas or compressed air for component safe soldering Fix solder joints Easy handling of air volume and temperature parameters Automatic tool recognition www.labem.pl 62 Hot Air Low running costs by safety rests Foot switch for activating the hot air Temperature sensor for process control Control via PC possible www.labem.pl 63 Hot Air WR 2 max. power supply 250 W Silver-Line Power-Response WP 80 LT Soldering tips WMP NT Soldering tips MPR 80 LT Soldering tips WP 65 XNT Soldering tips Standard-Line LR 21 LT Soldering tips WTA 50 WTA Nozzles WSP 150 LHT Soldering tips FE-Soldering iron WP 120 XT Soldering tips Desoldering iron WP 200 XHT Soldering tips DXV 80 DX Nozzles FE 75 LT Soldering tips FE 80 HT Soldering tips Hot air iron HAP 1 Hot air nozzles DSX 80 DX Nozzles Preheating plate WHP 80 Wire stripper WST 82 www.labem.pl 64 DSX 120 XDS Nozzles Hot Air WXA WAD 101 max. power supply 100 W Available September 2013 Power-Response Active Tip WX Adapter WX Adapter for PC T005 87 647 11 WXP 65 XNT Soldering tips WX Adapter for Zero Smog T005 87 647 12 WXP 120 XT Soldering tips WX Adapter for Remote control T005 87 627 24 WXP 200 XHT Soldering tips WXHAP 200 XHT Hot air nozzles Available September 2013 Preheating plate WHP 1000 WHP 3000 600 W WHP 3000 1200 W W XHP 120 120 W Available September 2013 WX Connection cable T005 87 647 10 Options for adapter connections see page 14. Fume Extraction Zero Smog 4V Zero Smog 6V Zero Smog 20T www.labem.pl 65 Hot Air For every application we offer the optimal tool From to 100 to 700 W Wide nozzle program ESD Technical Data WXA 2 WR 2 Available September 2013 Dimension (L x B x H) WAD 101 170 x 151 x 130 mm 273 x 235 x 102 mm ca. 3,3 kg ca. 6,7 kg 1 2 1 Power supply 230 V 230 V 230 V Power input 200 W 300 W 150 W I I I Weight Channels Protection class Fuse T 2,0 A Fuse: overcurrent release 1,6 A 230 V: T 630 mA / 120 V: T 1,0 A Temperature range Adjustable Soldering- and desoldering irons 50 C - 550 C continuously C Version: (150 F - 999 F) 50C - 550C (150F - 999F) Temperature control range Temperature control range depends on tool depends on tool WP 80 / WP 120 50C - 450C (150F - 850F) WP 200 50C - 550C (150F - 950F) WSP 150 50C - 550C (150F - 950F) DSX 80 / DXV 80 / DSX 120 50C - 450C (150F - 850F) HAP 1 50C - 550C (150F - 999F) Temperature accuracy Hot air 30C ( 54F) Soldering iron 9C ( 17F) Hot air 50C - 550C Soldering iron 50C - 550C F Version: Hot air 122F - 999F Soldering iron 122F - 842 9C ( 20F) Temperature accuracy HAP 1 30C ( 50F) Temperature stability 2C ( 5F) Air volume 166 x 134 x 101 0 - 20 l/min. approx. 0 - 10 l/min PressurePressure input, 400 kPa (58 psi), oilfree, dry compressed air or inert gas N2 Vacuum Order-no. T005 34 256 99 T005 33 776 99 www.labem.pl 66 max 15 l/min T005 32 686 99 Hot Air 4 WXA 2010 Set Power unit, 2 channels with Hot air iron WXHAP 200 Best set for hot air tasks Simultaneous operation of 2 soldering tools All WX tools compatible 1 Hot air nozzles page 198-204 2 Available September 2013 3 Order-no. T005 34 306 99 Model WXA 2010 Description Power unit, 2 channels 200 W (255 W) / 230 V Scope of supply: T005 34 256 99 WXA 2 T005 27 119 99 WXHAP 200 T005 87 278 22 R 06 T005 15 152 99 WDH 30 T005 87 278 21 R 04 Power unit, 2 channels 200 W (255 W) Hot air iron 200 W Hot air nozzle R 06 round o 3,0 mm Safety rest with dry cleaner Hot air nozzle R 04 round O 1,2 mm Power cable Equipotential bonding (normal state hard grounded) 1 2 3 4 WXA 2 Power unit, 2 channels Available September 2013 Hot air nozzle page 198-204 Order-no. T005 34 256 99 Model WXA 2 Description Power unit, 2 channels 200 W (255 W) / 230 V Scope of supply: T005 34 256 99 WXA 2 Power unit, 2 channels 200 W (255 W) / 230 V www.labem.pl 67 Hot Air WR 2000A Set 3 Hot air station, 2 channels with hot air iron HAP 1 Large hot air set Simultanuous operation of 2 soldering tools All soldering tools upto 200 W connectable 1 Hot air nozzles page 198-204 2 Order-no. T005 33 786 99 Model WR 2000A Scope of supply: 1 T005 33 776 99 WR 2 2 T005 27 115 99 HAP 1 T005 87 278 22 R 06 3 T005 15 152 99 WDH 30 T005 87 278 21 R 04 Description Hot air station, 2 channels 300 W / 230 V Power unit 300 W Hot air iron 100 W / 24 V Hot air nozzle R 06 round o 3,0 mm Safety rest with dry cleaner Hot air nozzle R 04 round O 1,2 mm Power cable Equipotential bonding (normal state hard grounded) www.labem.pl 68 Hot Air WAD 101 Set Hot air station, 1 channel with HAP 1 soldering iron Small hot air set For hot air irons or soldering irons upto 100 W 3 4 1 2 Hot air nozzles page 198-204 Order-no. T005 32 666 99 Scope of supply: 1 T005 32 686 99 2 T005 27 115 99 T005 87 278 22 3 T005 15 027 99 4 T005 87 278 21 Model WAD 101 Description Hot air station, 1 channel 150 W / 230 V PU WAD101 HAP 1 R 06 KH 27 R 04 Power Unit 150 W Hot air iron 100 W / 24 V Hot air nozzle R 06 round o 3,0 mm Safety rest with cleaning sponge Hot air nozzle round o 1,2 mm Accessories Order-no. T005 87 388 50 T005 13 120 99 Description Adapter for foot switch Foot switch 1 step www.labem.pl 69 Hot Air The Weller WHA hot air stations are designed for soldering and desoldering sensitive SMD components with hot air. The station use temperature and volume controlled hot air with Weller patented nozzle technology. 3 stations are available: a digital hot air station with integrated turbine and vacuum (WHA 3000V and WHA 3000P) and an analog hot air station without vacuum for easy applications (WHA 900). A wide range of different nozzles for common SMD components are available. WHA 3000V With integrated vacuum 700 W Hot air station For compressed air or inert gas. 1 3 5 Hot air nozzles page 198-204 4 2 Order-no. T005 33 366 99 Model WHA 3000V Description Hot air station 700 W / 230 V Scope of supply: 1 WHA 3000V 2 HAP 3000 3 T005 15 043 99 AKT 30 T005 87 577 70 4 T005 15 049 99 5 T005 87 507 21 NQ 30 Power unit 230 V for use with compressed air or inert gas Hot air iron Safety rest with Stop & Go function Foot switch 2 steps Nozzle change tool Nozzle, 4 side heated, 17,5 x 23,5 mm WHA 3000P 1 700 W Hot air station With integrated vacuum With integrated turbine 3 5 Hot air nozzles page 198-204 4 Order-no. T005 33 346 99 2 Model WHA 3000P Scope of supply: 1 WHA 3000P 2 HAP 3000 3 T005 15 043 99 AKT 30 T005 87 577 70 4 T005 15 049 99 5 T005 87 507 21 NQ 30 Description Hot air station 700 W / 230 V Power Unit 230 V with integrated turbine Hot air iron Safety rest with Stop & Go function Foot switch 2 steps Nozzle change tool Nozzle, 4 side heated, 17,5 x 23,5 mm www.labem.pl 70 Hot Air WHA 900 700 W hot air station for easy repair applications and heating processes as e.g. shrinking Brushless turbine for ideal hot air flow Hot air temperature is electronically controlled Order-no. T005 31 716 99 Hot air nozzles page 198-204 Model WHA 900 Scope of supply: T005 15 048 99 T005 15 157 99 Optional: T005 87 578 98 Description Hot air station 700 W / 230 V Depositing rackNR, ND, NQ Rest for WHA 900 Horizontal rest for HAP 3 Attention: Hot air nozzles are not included in the scope of supply (see page 198-204). Foot switch is not connectable to WHA 300 (T005 87 578 98) "c lic k" Optional horizontal rest for HAP 3 005 87 578 93 005 87 578 99 005 87 578 94 005 87 578 92 WHA 900 with Foot switch Order-no. Model T005 31 716 70 WHA 900 Description as WHA 900 (see above) with foot switch for activating the hot air Scope of supply: WHA 900 WHA 900 with connection for foot switch Foot switch 1 step 6966 EK Hot air heat gun For heat shrinking, drying or to detect faulty components on circuit boards. Cooling is possible because the air flow is independent of the heater. Temperature range ca. 400C - 430C Order-no. Model 6966EK 6966EK Scope of supply: 6964 0,2" 6957 1,5" 6958 Accessory: 6965A www.labem.pl Description Hot air heat gun 210 W / 230 V Hot air heat gun 210 W Reflector 0,2" Reflector 1,5" Shrinking nozzle Rest for gun 71 Hot Air WRK Reflow system Reflow system with vacuum pick-up For desoldering of SMD components 30 X 30 mm Order-no. Model T005 15 155 99 WRK Scope of supply: Description Reflow system for SMD components with external hot air works with desoldering station WR 3M Reflow housing: once each 33 x 33 mm, 27 x 27 mm, 24 x 24 mm, 20 x 20 mm, 15,5 x 15,5 mm, 12,5 x 12,5 mm, 10 x 10 mm Vacuum Pick-up 4,5 mm Vacuum Pick-up 10 mm Tripod Pick-up Depositing rack for nozzles Accessories Order-no. T005 15 154 99 T005 87 617 32 T005 87 617 31 T005 87 617 30 T005 87 137 99 T005 87 137 98 Description Depositing rack for nozzles Reflow housing Set 10 x 10 mm, 12,5 x 12,5 mm, 15,5 x 15,5 mm Reflow housing Set 20 x 20 mm, 27 x 27 mm Reflow housing Set 33 x 33 mm, 24 x 24 mm Rubber insert O 4,5 mm, 10 pieces Rubber insert O 10,0 mm, 10 pieces www.labem.pl 72 Hot Air WRK Sets Order-no. T005 87 617 30 Model WRK Set Scope of supply: Order-no. T005 87 617 31 Model WRK Set Description Reflow Set 33 x 33 mm / 24 mm x 24 mm Rubber insert,10,0 CSF, 3 pieces Spring, 3 pieces Vacuum Pick up O 10,0 mm Reflow housing 33 x 33 mm Reflow housing 24 x 24 mm VAC-hose, WRK Description Reflow Set 27 x 27 mm / 20 mm x 20 m Scope of supply: Rubber insert,10,0 CSF, 4 pieces. Spring, 4 Stk. Vacuum Pick up O 10,0 mm Reflow housing 27 x 27 mm Reflow housing 20 x 20 mm VAC-hose, WVP-WRK Order-no. Model T005 87 617 32 WRK Set Description Reflow Set 18 x 18 mm / 15,5 mm x 15,5 mm / 12,5 x 12,5 mm / 10 mm x 10 mm Scope of supply: Rubber insert, 4,5 CSF/WVP, 3 pieces Tripod Vacuum Pick up O 4,5 mm Reflow housing 18 x 18 mm Reflow housing 15,5 x 15,5 mm Reflow housing 12,5 x 12,5 mm Reflow housing 10 x 10 mm VAC-hose, WVP-WRK www.labem.pl 73 BGA/QFP Rework Systems www.labem.pl 74 Rework www.labem.pl 75 BGA/QFP Rework Systems Technical Data ESD WHA 3000P WHA 3000V WQB 4000SOPS Dimensions (B x L x H) mm: 240 x 270 x 170 240 x 270 x 101 692 x 580 x 680 Dimensions (W x L x H) inch: 9,44 x 10,63 x 6,69 9,44 x 10,63 x 3,97 248 x 248 x 256 Mains supply voltage: 230 V 230 V 230 V Power Output: 700 W 700 W 2300 W Top heating: 700 W Heating plate: large 1600 W (260 x 260 mm) small 400 W (120 x 120 mm) (switchable) Compressed air supply: - 400 - 600 kPa clean, dry compressed air 400 - 600 kPa clean, dry compressed air Temperature accuracy: 50C - 550C +/ - 30C (+ - 54F) 50C - 550C +/ - 30C (+ - 54F) continuously variable 50C - 400C Control accuracy 10C Air volume hot air: Air consumption: Safety Class: Order-no. continuously variable 5 - 50 l/min 5 - 50 l/min 5 - 50 l/min 60 - 100 l/min 1 (control unit and hand piece hard grounded) 1 (control unit and hand piece hard grounded) 1 T005 33 346 99 T005 33 366 99 T005 33 706 99 www.labem.pl 76 WHA 3000PS Set 00 W Hot air station 7 Integrated turbine Set with Infrared preheating plate and circuit board holder BGA Hot air nozzles page 198-204 Order-no. Model Description T005 33 556 99 WHA 3000PS Set Hot air station Scope of supply: 1 T005 33 346 99 WHA 3000P 700 W Hot air station with integrated turbine 2 T005 33 165 99 WBHS Circuit board holder with pivoting stand 3 T005 33 386 99 WHP 3000 Infrared preheating plate, 600 W WHA 3000P 00 W 7 Hot air station with turbine BGA Hot air nozzles page 198-204 Order-no. T005 33 346 99 Model WHA 3000P Description 700 W Hot air station with turbine www.labem.pl 77 Rework WHA 3000PS Set - The versatile system for repair and rework of fine pitch and BGA components The WHA 3000P will perform demanding repair tasks on circuit boards with complex fine pitch surface mounted components. The advanced control technology coupled with user-friendly operation, guarantees precision of repair processes. While the sophisticated automatic operation mode guarantees repeatability of the process and increases productivity and quality. Extensive range accessories compliment the machine to promote flexibility. Further Accessories see page 82. Patented Weller nozzle technology for maximum process control and user friendly operation. The powerful variable speed controlled turbine generates an air volume of up to 50 litres/min. Hot Air Nozzle flows hot air at the component. Memory space to store up to 10 thermal profiles to ensure process repeatability. Manual operation or operation via PC software. BGA/QFP Rework Systems WBHS Circuit board holder with a pivoting stand for the HAP 3000 hot air pencil. Circuit boards upto 310 mm x 320 mm can be accommodated. The circuit board holder ensures that the hot air pencil is vertical to the printed circuit board under repair and the pivoting stand allows the HAP 3000 hot air pencil to be raised and lowered precisely onto the component being reworked. WBHS Circuit board holder with a pivoting stand For boards upto 310 x 320 mm Order-no. T005 33 165 99 Model WBHS Description Circuit board holder with a pivoting stand WHA 3000VS Set 700 W For use with inert gas Hot air nozzles page 198-204 Order-no. Model Description T005 33 596 99 WHA 3000VS Set 700 W Hot air station Scope of supply: T005 33 366 99 WHA 3000V Hot air station 700 W for use with inert gas T005 33 165 99 WBHS Circuit board holder with pivoting stand T005 33 386 99 WHP 3000 Infrared preheating plate, 600 W www.labem.pl 78 Rework WHP 3000 Infrared preheating plate 600 W, 230 V Board size upto 120 x 190 mm Temperature range 50C - 400C Digital display for set and actual temperature Digitally controlled 3 Infrared high temperature ceramic elements for fast and efficient heat up 2 heated zones can be selected External sensor (accessory) connectable RS 232-Interface cable e.g. for connection to WHA 3000 hot air station Easy Fix board holder (as WHP 200 see page 87) K-type thermo couple socket for monitoring Order-no. Model T005 33 386 99 WHP 3000 ESD Description Infrared preheating plate 600 W / 230 V with Easy Fix board holder WHP 3000 Infrared preheating plate 1200 W, 230 V Board size upto 190 x 245 mm Temperature range 50C - 400C Digital display for set and actual temperature Digitally controlled 3 Infrared high temperature ceramic elements for fast and efficient heat up 2 Easy Fix board holder (as WHP 200 see page 87) K-type thermo couple socket for monitoring Order-no. Model T005 33 646 99 WHP 3000 ESD Accessory: T005 31 191 99 T005 31 190 99 T005 33 165 99 T005 33 164 99 WBHS WBH Description Infrared preheating plate 1200 W / 230 V with Easy Fix board holder RS 232 Interface cable K-Thermoelement 0,5 mm Circuit board holder with pivoting stand Circuit board holder without pivoting stand www.labem.pl 79 BGA/QFP Rework Systems Weller WQB Rework System The WQB 4000SOPS rework system upgrades the Weller product range in the SMD tool sector. A well thought-out design concept combines reliability and maximum process control with ease of use and technicaly advanced solutions. Usefull accessories increase the possible uses of these repair work stations. For the universal circuit board repair of BGA, QFP and SMD components, it is necessary to preheat the circuit board effectively from below and from above to precisely heat the components to be repaired to the reflow temperature as well as to reliably control the process. On the WQB 4000 the temperature regulated 2-Zone infrared bottom heater provides rapid warm-up and homgeneous substrate temperatures. The hot air top heater, with digital control electronics for temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to the components. A temperature sensor placed directly in the hot air nozzle efficiently regulates the top heater and thus provides maximum process control. On the digital programming unit all process steps can be programmed, saved and if necessary protected against unauthorized use as required. The most important process parameters are optionally displayed on the LC display during operation. Camera with two-color lighting for exact positioning. www.labem.pl 80 Rework WQB 4000SOPS 300 W / 230 V 2 BGA/SMT Rework system For components placing with camera support placing system BGA Hot air nozzles page 204 Order-no. Model Description T005 33 706 99 WQB 4000SOPS BGA/SMT Rework system 2300 W / 230 V Scope of supply: Base unit with top heater, bottom heater, control electronics and pneumatic unit Infrared radiation 1600 W Positioning unit with digital camera and split optic Circuit board holder with fine adjustment in X and Y direction Temperature sensor PT 100 Nozzle change tool Thermoelement type K 0,1 mm 5 pcs. Vacuum inserts O 4,5 mm 5 pcs. Vacuum inserts O 10,0 mm Software WQB 4000 CONTROL and WQB 4000 SOPS USB cable Calibration tool Vacuum pick up with 2 changeable vacuum inserts Mains cable 2 m connecting tube for compressed air Instruction manual Max. PC board size 450 x 500 mm www.labem.pl 81 BGA/QFP Rework Systems Accessories for fur WQB 4000SOPS, WQB 3000OPS, WQB 3000 and WHA 3000 PS / VS Clamping set Order-no. T005 87 549 24 Description Clamping set for irregluar shaped circuit boards (e.g. mobilephones, video/digital camera boards, etc.) 1 2 Support Order-no. 1 T005 87 557 45 2 T005 87 667 29 Description Support for large circuit boards for WQB 3000, WQB 3000OPS, WQB 4000SOPS with iron angle Support for circuit boards for WQB 4000 with aluminium angle Adjustable circuit board stop Order-no. T005 87 548 73 Description WQB 3000 Adjustable circuit board stop for WQB 3000 and WQB 4000 2 3 1 Downholder Order-no. 1 T005 87 557 41 2 T005 87 667 25 3 T005 87 667 26 T005 87 667 27 Description Spring-loaded downholder with magnet stand for WQB 3000, WQB 3000SOPS, WBH, WBHS Spring loaded downholder with magnet stand for WQB 4000 with aluminium angle. Angle downholder please order separately. Angle downholder (for WQB 4000 with aluminium angle) Set consists of: 2 x T005 87 667 25 & 1 x T005 87 667 26 www.labem.pl 82 Rework Temperature sensor Order-no. T005 87 549 48 Description Temperature sensor for WQB 3000, WQB 3000OPS, WQB 4000SOPS Thermoelement Order-no. T005 87 557 82 T005 31 190 99 Description Thermoelement type K, O 0,1 mm Thermoelement type K, O 0,5 mm Order-no. T005 87 549 70 Description NQ adapter for WQB 2000/3000/4000 Order-no. T005 87 137 99 T005 87 137 98 Description Vacuum insert O 4,5 mm, 10 piece Vacuum insert O 10,0 mm, 10 piece Order-no. T005 13 847 99 Description The right print kit for your component. On request NQ-Adapter Vacuum insert WPK Print Kit consits of: Print station complete with squeegee blade 70 x 25 mm Matching print templates for your device on request. www.labem.pl 83 Accessories for Temperature Measuring and Calibration WCB 2 Measuring and Calibration Box The WCB 2 is an external input unit for programming additional functions. It works with every digital Weller station. The setting is fast and easy. Battery powered supply makes the box independent from any mains and easy to transport. The WCB 2 has an PC interface (RS 232) and an integrated temperature gauge for thermo couple type K (accessory). The functions are: WCB 2 Measuring and Calibration Box for WSD series OFFSET: Correction value for soldering tip temperature SETBACK: Reduction on set temperature after a specified period of time LOCK: Locking the set temperature C/F: Switching temperature display C/F WINDOW: Setting a set value window. If the actual temperature is within the set value window a potential-free contact is activated Temperature measuring tips are available for each soldering iron Order-no. T005 31 180 99 Model WCB 2 Description Calibration unit Scope of supply: Calibration unit Battery 4 x 1,5 V Accessories: T005 31 184 99 T005 31 190 99 T005 31 191 99 Network adapter 230 V, 50 Hz Thermoelement type K, o 0,5 mm Interface Cable RS 232 www.labem.pl 84 Accessories WTT 1 Temperature Measuring Unit The WTT 1 digital temperature measuring system has been specially designed for measuring the temperature of soldering iron tips. The probe has a double sensor system and an own internal heat source. The measured temperature is fed to a control system that records the flow of heat in the probe and stabilises it with the aid of the internal heat source. This design ensures that no heat is drawn by the probe from the object to be measured. Erroneous measurements due to the large thermal load of the probe are thus prevented. The measured temperature is indicated on a three-digit LED display to a resolution of 1C. A red dot in the display is used to indicate the measured value and simplifies the reading of the measured temperature. An adjustable preheat temperature ensures a rapid response even at high temperatures. Different methods of equipotentioal bonding and the ESD appropriate design of the control unit and probe supplement the quality of this measuring unit. ESD WTT 1 Temperature measuring system Temperature range 50C -500C Tolerance +/- 5C Dimensions 166 x 115 x 101 mm (L x W x H) Order-no. T005 31 246 99 Model WTT 1 Description Temperature measuring system Scope of supply: Power unit Probe for WTT 1 T005 29 109 99 Temperature Measuring System onnection to WCB 2 C calibration unit For measuring soldering tip temperature Order-no. Model T005 13 832 99 Description For connection to unit WCB 2 or all other temperature measure instruments with type K sensor port. www.labem.pl 85 Accessories Preheating plates Preheating plates are used to preheat circuit boards under repair to reduce the possibility of thermal damages and to reduce the heat requirement of the soldering tool for speeding up the repair process. WHP 80 Preheating plate 80 W, 24 V Heating surface 80 x 50 mm Temperature range 50C - 200C For all Weller stations with min. 80 W Size housing 150 x 120 x 65 mm (L x B x H) ESD Order-no. T005 27 028 99 Model WHP 80 Description Preheating plate 80 W, 24 V, 80 x 50 mm WXHP 120 Preheating plate 120 W, 24 V Preheating Size 80 x 50 mm Temperature range 50C - 200C Platinum sensor Internal parameter storage (Zero Tolerance) Connectable to: WX 1, WX 2, WXD 2 WXA 2 Size housing 150 x 120 x 65 mm (L x B x H) Order-no. T005 27 029 99 Available from September 2013 Model WXHP 120 ESD Description Preheating plate120 W, 24 V, 80 x 50 mm WHP 1000 Preheating plate 1000 W, 230 V Heating surface Temperature range RS 232 Interface e.g. for connection to Weller hot air stations WHA 3000 Digital display for set and read temperature Element Type K (accessory) connectable Order-no. T005 33 648 99 ESD Model WHP 1000 Description Preheating plate 1000 W, 230 V, 220 x 150 mm www.labem.pl 86 200 W, 230 V Heating surface 120 x 60 mm Temperature range 50C - 400C Digital display for set and read temperature Electronic temperature control Infrared high temperature ceramic elements for fast and efficient heat up 2 Easy Fix board holder ESD safe Order-no. Model T005 33 716 99 WHP 200 Accessories WHP 200 Infrared preheating plate Easy Fix board holder ESD Description Preheating plate 200 W, 230 V, 120 x 60 mm with easy fix board holder WHP 3000 Infrared preheating plate 600 W, 230 V Heating surface 120 x 190 mm Temperature range 50C - 400C Digital display for set and read temperature Electronic temperature control 3 Infrared high temperature ceramic elements for fast and efficient heat up Two heated zones can be selected Element Type K (accessory) connectable RS 232 Interface e.g. for connection to Weller hot air stations WHA 3000 2 Easy Fix board holder (as WHP 200) Order-no. Model T005 33 386 99 WHP 3000 ESD Description Infrared preheating plate 600 W / 230 V with Easy Fix board holder WHP 3000 Infrared preheating plate 1200 W, 230 V eating surface 190 x 245 mm H Temperature range 50C - 400C Digital display for set and read temperature Electronic temperature control 6 Infrared high temperature ceramic elements for fast and efficient heat up 2 Easy Fix board holder (as WHP 200) Order-no. Model T005 33 646 99 WHP 3000 Accessories: T005 31 191 99 T005 31 190 99 T005 33 165 99 WBHS T005 33 164 99 WBH ESD Description Infrared preheating plate 1200 W, 230 V with Easy Fix board holder RS 232 Interface Cable Thermoelement Type K 0,5 mm PC board holder with pivoting stand PC board holder without stand www.labem.pl 87 Accessories PCB Board Holders USB Microscope Microscope with digital camera and USB interface Adjustable work stand Application software Resolution: 1280 x 1024 MP Interface: USB 2.0 Magnification: 20X - 90X Sensor 1/3" Color CMOS Video frame rate: up to 30 Fps Illumination: 8 build-in Hightech LEDs LED on/off controlled by software Save file format: BMP, JPG, AVI Dimensions: 100 mm (L) x 32 mm (D) Cable length: approx. 1,8 m ESD Order-no. Model T005 13 835 99 T005 13 839 99 T005 13 834 99 Description USB Microscope with digital camera and adjustable work stand USB Microscope with digital camera and adjustable work stand, with polarisation filter Stand without arm ESF 120ESD PCB board holder Max. size 160 x 235 mm Rotates through 360 in increments of 15 Spring clamp Cushioned arm for component fixing ESD Order-no. T005 15 026 99 Model ESF 120ESD Description PCB board holder WBH 2 PCB board holder Max. size 310 x 320 mm Order-no. T005 33 167 99 Model WBH2 Description Board holder without stand www.labem.pl 88 Accessories WBHS PCB board holder with stand Max. size 310 x 320 mm Board positioning in X and Y directions For single and doublesided boards Stand to mount hot air pencil HAP 3000 Preheating plate WHP 3000 could be fitted under the board holder Order-no. Model T005 33 165 99 WBHS Description PCB board holder with stand for WHA 3000P + WHA 3000V Stand of WBHS Order-no. T005 33 166 99 Description Stand of WBHS WBH PCB board holder without stand Same as WBHS but without stand Order-no. T005 33 164 99 Model WBH Description PCB board holder without stand Accessories for WBHS, WBH, WQB Order-no. T005 87 548 73 Description Adjustable circuit boarder stop T005 87 557 45 Support for large dimensioned circuit boards T005 87 557 41 Downholder for circuit boards T005 87 549 24 Clamping set for irregular shaped circuit boards (e.g. mobile phones, video/digital camera boards, etc.) www.labem.pl 89 Accessories Soldering Bathes Rework preparation tool e.g. for tin coating of wire ends and cleaning of leads and wires from excess and dirt. All soldering baths are suitable for leadfree solder. W101 H Soldering Bath 100 W, 230 V Inside O 17,4 mm, depth 22 mm Different temperatures available Magnastat temperature control Horizontal stand For lead free solder Order-no. T005 61 093 99 ESD Model W101 H Description Miniature soldering bath 100 W, 230 V Scope of supply: Miniature soldering bath with 330C insert and horizontal stand Accessories: T005 11 706 99 T005 11 707 99 T005 11 708 99 T005 11 709 99 Insert for temperature 285C Insert for temperature 330C Insert for temperature 380C Insert for temperature 450C WSB 80 Soldering Bath 80 W, 24 V Inside O 20 mm, depth 25 mm Temperature range 50C - 450C Connectable to all Weller 80 W digital stations V2A tray to guard against dripping solder residue Size housing: 150 x 120 x 65 mm (L x B x H) Heat-up time ~ 7 min Order-no. (50C - 350C) T005 27 040 99 For lead free solder Model WSB 80 Description Soldering bath 80 W, 24 V Model WSB 150 Description WSB 150 Soldering bath 150 W, 24 V WSB 150 Soldering Bath 150 W, 24 V Soldering bath size: 58 x 33 x 19 mm (L x W x H) Temperature range 50C - 550C Connectable to all Weller 150 W digital stations V2A tray to guard against dripping solder residue Size housing: 150 x 120 x 65 mm (L x W x H) Heat-up time ~ 10 min (50C - 350C) For lead free solder Order-no. T005 27 042 99 WXSB 200 Soldering Bath 200 W, 24 V Soldering bath size: 58 x 33 x 19 mm (L x W x H) Temperature range 100C - 500C Connectable to all WX tools Heat-up time ~ 10 min (50C - 350C) Size housing: 150 x 120 x 65 mm (L x W x H) Order-no. T005 27 043 99 90 Available from September 2013 Model WXSB 200 Description WXSB 200 Soldering bath 200 W, 24 V www.labem.pl Accessories The Weller WST 82 temperature controlled thermal stripping tool is suitable for all 80 W Weller stations. It strips off thermoplastic insulation materials by using precisely shaped stripping blades. The stripping length is adjustable up to 30 mm. Optimal temperature control via power unit (accessory). Thermal stripping tool WST 82 KIT1 3 7 Suitable for all 80 W Weller stations For ribbon cable and round wire Order-no. T005 25 032 99 Model WST 82 KIT1 Description Thermal stripping tool 80 W, 24 V Scope of supply: Thermal stripping tool WST 82 Brush Cutting knife set Knife Set AWG 12, 16, 24 Safety rest T005 87 250 34 7 T005 87 257 42 3 T005 87 257 26 T005 15 032 98 Thermal stripping tool WST 82 KIT2 2 Suitable for all 80 W Weller stations Flex cord for 1,5 - 3,5 m working distance For ribbon cable and round wire 1 6 Order-no. Model T005 25 031 99 WST 82 KIT2 Description Thermal stripping tool 80 W, 24 V with flexcord for wider operation range Scope of supply: Thermal stripping tool WST 82 Brush V-Knife Set 4,25 mm x 2 mm Safety rest 1 T005 87 250 34 6 T005 87 257 36 2 T005 15 032 98 2 3 4 5 6 7 Accessories WST 82 2 3 4 5 6 7 Order-no. T005 87 257 22 T005 87 257 26 T005 87 257 29 T005 87 257 32 T005 87 257 36 T005 87 257 42 Description Universal knife set 9 mm x 2 mm Knife set AWG AWG 12, 16, 24 (2,0, 1,3, 0,51 mm) Knife set AWGAWG 12, 14, 24, 26 (2,0, 1,6, 0,51, 0,4 mm) Knife set AWG AWG 14, 18, 22, 26 (1,6, 1,02, 0,64, 0,4 mm) V-Knife set AWG 4,25 mm x 2 mm Cutting knife set, width 23 mm 23 mm www.labem.pl 91 Accessories Desoldering Pumps With the hand-held desoldering pumps a vacuum is produced by means of a piston, cylinder and spring force. The piston is tensioned manually and secured automatically. The piston is moved back suddenly by pressing the release button and a vacuum is created briefly so that the soldered joint is freed of liquid solder. SA 21A Manual desoldering pump Length 200 mm Metal housing antistatic Order-no. SA21A Model SA 21A Description Manual desoldering pump SA 21A1 Desoldering tip antistatic for SA 21A Model PS 100A Description Manual desoldering pump PS 1001A Desoldering tip antistatic for PS 100A Model PS 200A Description Manual desoldering pump PS 2001A Desoldering tip antistatic for PS 200A Accessories: PS 100A Manual desoldering pump Length 150 mm Strong vacuum, minimal rebound Metal housing antistatic (with tip PS 1001A) Order-no. PS100A Accessories: PS 200A Manual desoldering pump Length 200 mm Strong vacuum, minimal rebound Metal housing antistatic (with tip PS 2001A) Order-no. PS200A Accessories: www.labem.pl 92 Accessories Vacuum-Pen For easy pick and place of delicate SMD components. The vacuum pen avoids stress and damage to the leads. The versatile compact sized pen is independent from compressed air or batteries. WLSK 200 Vacuum-Pen Order-no. WLSK200 Model WLSK 200 Description Vacuum-Pen including Tip 3,2 mm x 9,5mm Accessories: WLSK200T18 WLSK200T38 KDS260S KDS260M KDS260L WLSKT 18 WLSKT 38 KDS 260S KDS 260S KDS 260L Replacement with tip, rubber 3,2 mm Replacement with tip, rubber 9,5 mm Replacement rubber O 3,2 mm Replacement rubber O 6,3mm Replacement rubber O 9,5 mm Model SD 1000 Description Solder Dispenser SD 1000 Solder Dispenser For use of coils up to 1000 g Length 95 mm, core O > 17 mm Length 70 mm, core O > 12 mm Length 84 mm, core O < 12 mm Order-no. T005 13 017 99 ABW 2 Extension for additional reel For use of coils up to 1000 g Length 95 mm, core O > 17 mm Length 70 mm, core O > 12 mm Length 84 mm core O < 12 mm Order-no. Model T005 13 013 99 ABW 2 Description Extension for additional reel, to be fixed on SD 1000 www.labem.pl 93 Accessories Cleaning Tools The solution for cleaning lead free solder! When using lead free you will be experienced an increased in oxidation in the wettable area of the tip. These oxides must be removed regularly otherwise it will make the tip completely unwettable and not usable anymore. When cleaning the tip by means of the Weller WDC Dry Cleaner a special brass wool is used. First the surplus solder is removed by tapping the tip on the soft edge of the collector box.The final cleaning is then done by pushing and turning the tip in the brass wool. After cleaning there is still a fine amount of solder on the tip avoiding fast oxidation of the iron layer which is an advantage versus the cleaning by the wet sponge. The brass wool can be soaked in flux which may improve the performance further. More informations for cleaning you can find on page 160/161. WDC Dry cleaner Minimisation of the erosion ouble soldering tip lifetime D Superior wetting properties Reduced spring effect - less solder splashes Order-no. Model T005 15 124 99 WDC Description Dry cleaner for soldering tips with brass cleaning wool Accessories: T005 13 840 99 T005 13 824 99 Brass cleaning wool for WDC (2 pieces) Metal wool for WDC (2 pieces) WDC 2 Dry cleaner Order-no. Model T005 15 125 99 WDC 2 Description Dry Cleaner for WDH safety rests with brass cleaning wool Accessories: T005 13 841 99 T005 13 825 99 Brass cleaning wool for WDC 2 (2 pieces) Metal wool for WDC 2 (2 pieces) Order-no. T005 22 419 99 T005 22 420 99 Description Cleaning sponge single-layer, 70 x 55 x 16 mm Cleaning sponge double-layer, 70 x 55 x 16 mm Cleaning sponge Stainless steel brush Order-no. Model T005 13 827 99 Description Stainless steel brush (3 pieces) www.labem.pl 94 Accessories WPB 1 Polishing Bar Cleaning only possible in cold state of the soldering tip. Further informations for cleaning you can find on page 160/161 Order-no. Model WPB1 WPB 1 Description Polishing Bar for removal of compacted oxidised films on soldering tips. WSW Lead free soldering wire for longer tip lifetime Soldering wire with integrated flux core Superior wetting properties Cost reduction due to reduction in tip change frequency Not flux soaked - no process pollution Reduction of service costs for removing of oxidised layers No-clean flux Flux content 3,5 % Further informations for cleaning you can find on page 160-161. Available September 2013 Type WSW SAC M1 WSW SAC L0 WSW SC L0 WSW SC M1 Alloy Sn3.0Ag0.5Cu Sn3.0Ag0.5Cu Sn0.7Cu Sn0.7Cu Temperature 217-221C 217-221C 227C 227C Flux J-STD 004 M1 L0 L0 M1 Flux content 3.5% 3.5% 3.5% 3.5% Weight 500 gr 500 gr 500 gr 500 gr Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr. 0,3 mm T005 13 865 99 T005 13 872 99 - - 0,5 mm T005 13 864 99 T005 13 870 99 T005 13 880 99 T005 13 876 99 0,8 mm T005 13 863 99 T005 13 869 99 T005 13 879 99 T005 13 875 99 1,0 mm T005 13 862 99 T005 13 868 99 T005 13 878 99 T005 13 874 99 1,2 mm T005 13 861 99 T005 13 867 99 T005 13 877 99 T005 13 873 99 1,6 mm T005 13 860 99 T005 13 866 99 - - Gewicht 250 gr 250 gr 250 gr 250 gr Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr. 0,8 mm T005 13 885 99 T005 13 887 99 - - 1,0 mm T005 13 886 99 T005 13 888 99 - - Weight 100 gr 100 gr 100 gr 100 gr Diameter Art.-Nr. Art.-Nr. Art.-Nr. Art.-Nr. 0,3 mm T005 13 881 99 T005 13 883 99 - - 0,5 mm T005 13 882 99 T005 13 884 99 - - Tip-Activator Cleaning only possible in hot state of the soldering tip. Further informations for cleaning you can find on page 160-161. Order-no. T005 13 031 99 Model Tip-Activator www.labem.pl Description For regeneration of oxidized tips 95 Accessories Cleaning Tools 1 WDC Dry cleaner 2 Further informations for cleaning you can find on page 160-161. 3 4 Order-no. T005 15 126 99 1 2 3 4 Scope of supply: T005 15 124 99 T005 13 031 99 T005 13 827 99 WPB 1 Model WDC Description Dry cleaner WDC Weller Dry Cleaner Tip Activator Stainless steel brush Polishing Bar 1 WDC 2 Dry cleaner 2 Further informations for cleaning you can find on page 160-161. 3 4 Order-no. T005 15 127 99 1 2 3 4 Scope of supply: T005 15 124 99 T005 13 031 99 T005 13 827 99 WPB 1 Model WDC 2 Description Dry cleaner WDC 2 Weller Dry Cleaner Tip Activator Stainless steel brush Polishing Bar The desoldering wires consists of a copper net with flux. The special surface treatment allows efficient solder removal. Desoldering Wires 96 Order-no. T005 13 010 99 T005 13 011 99 T005 13 012 99 Model Desoldering wire Desoldering wire Desoldering wire Description 1,6 m coil, width 1,5 mm 1,6 m coil, width 2 mm 1,6 m coil, width 2,5 mm T005 13 028 99 Desoldering wire 15 m coil, width 2,5 mm T005 13 026 99 T005 13 027 99 Desoldering wire Desoldering wire 30 m coil, width 1,5 mm 30 m coil, width 2 mm www.labem.pl Accessories Liquid flux Without brush. Typ 1.1.3.AF-SW32, EN29 454 Remaining flux is not corrosive DIN EN 61190 ROL0 Order-no. Flux on base of resin T005 13 831 99 Description Liquid flux (100 ml) for simple soldering applications with high temperature and long soldering times (for example wire and dip) Liquid flux With brush Solvent content 73 % ROL1 related to IPC J-STD-004 Order-no. T005 13 837 99 Description Liquid flux RMA (15 ml) especially for BGA and SMT rework. Very reliable, avoids short cuts The Spot-Mask is a material to protect connectors of PCBs from tinning during the reflow process. For manual rework the Spot-Mask is easily applied and removed. Mechanical fixture after 6 min, hardened after 2-3 hours by 20C, 1 hour by 95C. Spot-Mask Storable 12 months. Suitable for lead free applications. Order-no. SM15748BK Model Spot-Mask Description Suitable for lead free applications, 250 ml Extension cord Order-no. T005 32 099 99 T005 25 098 99 T005 26 098 99 Description Extension cord 2-wire, 4 m for,Soldering iron TCPS Extension cord 5-wire, 4 m, up to 50 W for Soldering iron LR 21, MLR 21, WTA 50 Extension cord 7-wire, 3 m, up to 80 W, for Soldering iron WMP, WP 80, WSP 80 www.labem.pl 97 Why Fume Extraction ? Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and the environment. Most people thought that the move to leadfree soldering would be more nature friendly. In reality leadfree soldering smoke emissions contain more breathable fine dust particles. More smaller particles are produced due to the higher working temperatures required and because more flux is used in the soldering process. In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects on people and machines. It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get caught more easily and block the alveoli in the lungs. To protect the operator it is important to use an extraction system that is able to separate these particles and gases and then re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs. The smaller the particles are, the deeper they penetrate into the respiratory system The deeper the particles penetrate, the higher are the health risks The smallest particles travels via alveoli into the bloodstream Fine dust accumulation in the human body Fibres 10 m Pollen 10 m Bacteria Pigments 5 m Fine dust filter F7 / M5 Smog Asbestos dust > 1m Viruses > 0,5 m Wide band gas filter E 12 Gas Gasfilter 90 minutes soldering with leadfree solder wire before www.labem.pl 98 after Fume Extraction Pollution concentration Filter process Increasing soldering temperature causes higher pollutant concentration of small particles! WFE, WFE P Zero Smog 20T Zero Smog 4V Zero Smog 6V WFE 2ES WFE 2X 600 Leadfree solder 340 C 2. + 3. 1. 500 400 200 100 0 0,1 2. or 3. Million particles pro m3 300 2. or 3. Leadfree solder 310 C 1. Particle size in m 0,5 2,5 12,5 Filter drawings not true to original Filter classes and recommended applications 1. Fine dust filter For standard applications with a small amount of flux and pollution gases with high solid content, Weller(R) FT offers filter classes M 5 or F 7. 2. Compact filter consisting of: EPA filter Filter particles up to 0,3 m. Weller(R) FT offers EPA (Efficiency Particulate Air) filters of class E 12, medium filtration efficiency 99,5%. Wide band gas filter Wide band gas filter For cleaning harmful fumes and vapours. The Weller(R) FT wide band gas filter consists of 50% active carbon and 50% Puratex. Harmful gases with a high molecular weight are cleaned by the active carbon. Puratex it suitable for absorbing gases of lower molecular weight. Because of its composition, Puratex is able to convert a large number of chemical pollutants by means of molecular modification into non-polluting gases. Medium filtration efficiency Em % against particle size 0,12 m 100 97 % 90 >99,5 % 80 70 60 95 % 50 40 30 20 10 0 Filter class M 5 F 7 E 12 3. Gas filter (option) The gas filter is used for extracting adhesive fumes and solvents. Experience has shown that filtering suspended particles is not so vital in this respect. The gas filter is filled with 50% active carbon and 50% Puratex. The EPA E 12 is omitted. www.labem.pl 99 Solutions for Fume Extraction - For clean air Weller FT offers two extraction solutions: Volume Extraction ESD Larger areas can be covered Low maintenance Mobile Quick & easy installation Economic for 1 to 8 work places Remote control More suitable for applications involving, for example, solder baths, hot air soldering, micro solders and gluing work. Weller(R) FT offers various mobile systems that purify the air up to a maximum of 8 workplaces. Weller(R) FT Easy-Click-60 Example for installation Set up your volume extraction solution with our configurator www.weller.eu Tip Extraction ESD Less investment per work place Collect pollution direct at source Up to 20 collection points with one system (200 m apart) Ergonomic friendly with easy access to work piece No noise Minimal air movement Weller(R) FT FE (Fume extraction) soldering irons have a smoke tube integrated into the handle. When soldering the tube is positioned directly above the joint and collects any fumes produced. Fume extraction attachments can be retro fitted to non fume extraction www.labem.pl 100 Fume Extraction Volume extraction with extraction arms Low underpressure High volume flow rate For 1 extraction arm o 60 - Volume flow rate = 50 - 80 [m3/h] - Underpressure = 300 - 700 [Pa] For 6 extraction arms o 60 - Volume flow rate = 300 - 480 [m3/h] - Underpressure = 300 - 700 [Pa] Weller(R) FT Easy-Click-60 connection elements for quick and easy installation for volume extraction The tube is positioned directly above the joint and collects any fumes produced. High underpressure Low volume flow rate For 1 FE soldering iron - Volume flow rate = 1 - 1,5 [m3/h] - Underpressure = 10.000 [Pa] For 25 soldering irons - Volume flow rate = 25 - 30 [m3/h] - Underpressure = 10.000 [Pa] www.labem.pl 101 Volume Extraction WFE 2ES Spare filter WFE 2X Sloped nozzle Accessory Sloped nozzle Fine dust filter M 5 T005 87 627 03 Pre filter box Pocket filter for pre filter box Funnel nozzle EPA Filter H12 and active carbon T005 87 627 01 Filter for WFE 2X T005 36 590 99 Set (M 5 + H 12) Exhaust hood Trolley with wheels Extraction arms Sets Hanging deviar KIT 1 WF Nozzle sloped 60 mm KIT 1 S WF KIT 1 WF Funnel KIT 1 WF 32 KIT 1 WF 60 Remote control Accessories Installation Extraction arm Extraction arm 32 mm incl. nozzle Adapter Kit 50-60 mm www.labem.pl 102 WFV Stop valve Extraction hose 1 m, 3 m, 5 m Adapter 40/60 Remote control WX Adapter for Remote control T005 87 627 24 Spare filter Fume Extraction Zero Smog 4V Zero Smog 6V Filter Fine dust filter M 5 T005 87 359 37 (2S, 4V) T005 87 358 37 (4S, 6V) Pre filter box Fine dust filter F 7 T005 87 359 38 (2S, 4V) T005 87 358 36 (4S, 6V) Pocket filter F7 WX Connection cable T005 87 647 10 Adapter Filtering for sticky particles o 75 mm on Easy-Click 60 Compact filter T005 87 359 36 (2S, 4V) T005 87 358 38 (4S, 6V) End cap Easy-Click 60, 60 mm Female adapter Male adapter Compact filter for adhesive fumes T005 87 358 95 (2S, 4V) T005 87 358 35 (4S, 6V) T-piece with 2 male and 1 female adapter Hose connector, angle Hose connector, straight www.labem.pl 103 Volume Extraction Technical data WFE 2ES Dimensions L x B x H (mm): WFE 2X 320 x 320 x 395 460 x 610 x 210 Weight 9 kg 15 kg Voltage 230V, 50Hz / 120 V, 60 Hz 100-240 V, 60 Hz Sound level in 1m 55 dB (A) 54 dB (A) Electrical power 115 VA 175 VA Max. vacuum 1800 Pa 2.300 Pa Max. capacity 180 m3/h 100 m3/h Fine dust filter Fine dust filter M 5 Fine dust filter F 7 EPA Filter E 12 and active carbon (*Set incl. filter M 5) Compact filter EPA filter E 12 and 50% active carbon, 50% Puratex Filter www.labem.pl 104 Fume Extraction Zero Smog 4V Dimensions L x B x H (mm): Zero Smog 6V 320 x 320 x 395 450 x 450 x 650 19 kg 40 kg 230 V / 50 Hz (120 V / 60 Hz) 230 V / 50 Hz 48 dB (A) 51 dB (A) Electrical power 275 VA 460 VA Max. vacuum 2700 Pa 2800 Pa Max. capacity 230 m3/h 615 m3/h Fine dust filter Fine dust filter F 7 Fine dust filter F 7 Compact filter EPA filter E 12 (50% active carbon, 50% Puratex) Compact filter EPA filter E 12 (50% active carbon, 50% Puratex) Weight Voltage Sound level in 1m Filter www.labem.pl 105 Volume Extraction Low maintenance Flexible Quick and easy installation For different applications ESD For applications where volume extraction is more suitable, e.g. solder baths, hot air soldering, micro solders and gluing work, Weller offers the mobile systems Zero Smog 4V and Zero Smog 6V. The units purify the air upto 8 workplaces. A wide range of accessory is available for each system. onstant flow control (CFC) C Efficiency test via USB port Acoustical and optical filter alarm Zero Smog 4V For upto 4 workplaces Order-no. Model T005 36 606 99 Zero Smog 4V Scope of supply: Description Mobile fume extraction unit 230 V / 50 Hz, for volume extraction with built in turbine Fume extraction unit 230 V / 50 Hz Filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 onstant flow control (CFC) C Efficiency test via USB port Acoustical and optical filter alarm Zero Smog 4V Includes adhesive fume filter For upto 4 workplaces Order-no. Model T005 36 616 99 Zero Smog 4V Scope of supply: Description Mobile fume extraction unit 230 V / 50 Hz for volume extraction with built in turbine with adhesive fume filter Fume extraction unit 230 V / 50 Hz Filter for adhesive fumes (wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 www.labem.pl 106 Fume Extraction Zero Smog 4V Kit 1 sloped nozzle F or upto 4 workplaces Set with 1 Extraction arm and Sloped nozzle Order-no. Model T005 36 636 99 Zero Smog 4V Kit 1 sloped nozzle Scope of supply: T005 36 606 99 Zero Smog 4V T005 36 572 99 Consists of: T005 36 578 99 T005 36 577 99 T005 36 574 99 T005 36 575 99 T005 36 576 99 WFV 60 Description Mobile fume extraction kit 230 V / 50 Hz for 1 workplace - upgrading to 4 workplaces possible with further accessories Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 Kit 1 WF Sloped 60 for volume extraction (50% Active carbon , 50% Puratex) Extraction arm Sloped nozzle Stop valve incl. bench mounting brackets Bench mounting bracket Extraction hose Zero Smog 4V Kit 2 sloped nozzle F or upto 4 workplaces Set with 2 Extraction arms and Sloped nozzle Order-no. Model T005 36 656 99 Zero Smog 4V Kit 2 sloped nozzle Scope of supply: T005 36 606 99 Zero Smog 4V Description Mobile fume extraction kit 230 V / 50 Hz for 2 workplaces - upgrading to 4 workplaces possible with further accessories 2 x T005 36 572 99 Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 KIT 1 WF Sloped 60 for volume extraction Consists of: 2 x T005 36 578 99 2 x T005 36 577 99 2 x T005 36 574 99 2 x T005 36 575 99 2 x T005 36 576 99 Extraction arm Sloped nozzle Stop valve incl. bench mounting brackets Bench mounting bracket Extraction hose WFV 60 www.labem.pl 107 Volume Extraction Zero Smog 4V Kit 1 Funnel nozzle F or upto 4 workplaces Set with 1 Extraction arm and funnel nozzle Order-no. Model T005 36 626 99 Zero Smog 4V Kit 1 Funnel nozzle Scope of supply: T005 36 606 99 Zero Smog 4V Description Mobile fume extraction kit 230 V / 50 Hz for 1 workplace - upgrading to 4 workplaces possible with further accessories T005 36 571 99 Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 Kit 1 WF Funnel 60 for volume extraction Consists of: T005 36 578 99 T005 36 573 99 T005 36 574 99 T005 36 575 99 T005 36 576 99 Extraction arm Funnel nozzle Stop valve incl. bench mounting brackets Bench mounting bracket Extraction hose WFV 60 Zero Smog 4V Kit 2 Funnel nozzle F or upto 4 workplaces Set with 2 Extraction arm and funnel nozzle Order-no. Model T005 36 646 99 Zero Smog 4V Kit 2 Funnel nozzle Scope of supply: T005 36 606 99 Zero Smog 4V 108 Description Mobile fume extraction kit 230 V / 50 Hz for 2 workplace - upgrading to 4 workplaces possible with further accessories 2 x T005 36 571 99 Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 KIT 1 WF Funnel 60 for volume extraction Consists of: 2 x T005 36 578 99 2 x T005 36 573 99 2 x T005 36 574 99 2 x T005 36 575 99 2 x T005 36 576 99 Extraction arm Funnel nozzle Stop valve incl. bench mounting brackets Bench mounting bracket Extraction hose WFV 60 www.labem.pl Fume Extraction WFE 2ES Set For max. 2 workplaces S et with 1 Extraction arm and Funnel nozzle Economy solution Order-no. Model T005 36 516 89 WFE 2ES Set Scope of supply: T005 36 506 99 WFE 2ES Description Mobile solution for volume extraction for max. 2 workplaces, quick and easy to install for 1 workplace T005 36 571 99 Fume extraction unit - Compact filter, consists of: EPA filter E 12, active carbonate foam, Fine dust filter M 5 KIT 1 WF Funnel 60 for volume extraction Consists of: T005 36 578 99 T005 36 573 99 T005 36 574 99 T005 36 575 99 T005 36 576 99 Extraction arm Funnel nozzle Stop valve incl. bench mounting brackets Bench mounting bracket Extraction hose WFV 60 WFE 2ES F or max. 2 workplaces Economy solution Order-no. Model T005 36 506 99 WFE 2ES Description Fume extraction unit 230 V with EPA filter E 12 active filter, fine dust filter M 5 T005 36 506 70 WFE 2ES WFE 2ES with wide band gas filter for adhesive fumes www.labem.pl 109 Volume Extraction WFE 2X Kit F or max. 2 workplaces Set with 1 Extraction arm and Sloped nozzle Order-no. Model T005 36 587 99 WFE 2X Kit 1S Scope of supply: T005 36 588 99 WFE 2X T005 36 579 99 Description Mobile fume extraction unit 100-240 V with Sloped stativ extraction arm for 1 workplace Fume extraction unit 100-240 V / 50/60 Hz Easy-Click-60 2 joint aluminium arm with sloped nozzle, length 1,2 m Consists of: T005 36 598 99 T005 36 575 99 T005 36 576 99 T005 36 577 99 Stativ extraction arm without valve Bench mounting bracket Extraction hose Sloped nozzle Extraction arm 70 cm WFE 2X Kit 1 F or max. 2 workplaces Set with 1 extraction arm Order-no. Model T005 36 589 99 WFE 2X Kit 1 Scope of supply: T005 36 588 99 WFE 2X T005 36 719 99 Consists of: Description Mobile fume extraction unit 100-240 V with Sloped stativ extraction arm for 1 workplace Fume extraction unit 100-240 V / 50/60 Hz in the scope of supply Stop valve Bench mounting bracket Extraction hose flexible 3 m Extraction arm o 60 mm with funnel Funnel nozzle WFE 2X For max. 2 workplaces Order-no. Model T005 36 588 99 WFE 2X Scope of supply: Description Fume Extraction Unit 230 V / 50 Hz for volume extraction WFE 2X Fume extraction unit 100-240 V / 50/60 Hz Active carbon (EPA Filter E 12, wide band gas filter (50% Active carbon / 50% Puratex) www.labem.pl 110 Fume Extraction onstant flow control (CFC) C Efficiency test via USB port Acoustical and optical filter alarm Zero Smog 6V F or upto 6 workplaces 1 connection included Further connections must be ordered separately Order-no. Model T005 36 666 99 Zero Smog 6V Description Mobile fume extraction unit 230 V / 50 Hz, for volume extraction with built in turbine Scope of supply: Fume extraction unit 230 V / 50 Hz Compact filter, consists of EPA filter E 12 and wide band gas filter (50% Active carbon, 50% Puratex) Fine dust filter F 7 T005 87 358 38 T005 87 358 37 onstant flow control (CFC) C Efficiency test via USB port Acoustical and optical filter alarm Zero Smog 6V F ume extraction with adhesive fume filter For upto 6 workplaces 1 connection included Further connections must be ordered separately Order-no. Model T005 36 667 99 Zero Smog 6V Scope of supply: Description Mobile fume extraction unit 230 V / 50 Hz, for volume extraction with built in turbine and adhesive fume filter Fume extraction unit 230 V / 50 Hz Compact filter for adhesive fumes (wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 T005 87 358 35 T005 87 358 37 www.labem.pl 111 Accessoires Volume Extraction: Extraction Arm Sets ESD Easy Click 60 Kit 1 WF 32 Microscope extraction arm With sloped nozzle Order-no. Model T005 87 627 70 Kit 1 WF 32 Consists of: T005 36 574 99 T005 36 576 99 T005 36 580 99 Description Easy-Click-60 Microscope Extraction arm O 32 mm, Set flexible, length 1 m Order-no. Model T005 36 571 99 Kit 1 WF Consists of: T005 36 574 99 T005 36 576 99 T005 36 578 99 T005 36 573 99 Description Easy-Click-60 Extraction arm with funnel, width 230 mm, height 100 mm, Set flexible, O 60 mm, length 1 m Order-no. Model T005 36 572 99 Kit 1 WF Consists of: T005 36 574 99 T005 36 576 99 T005 36 578 99 T005 36 577 99 Description Easy-Click-60 Extraction arm with sloped nozzle, 60 mm, length 1 m Stop valve with bench mounting brackets Extraction hose flexible 3 m Extraction arm o 32 mm Easy Click 60 Kit 1 WF Funnel With funnel Stop valve with bench mounting brackets Extraction hose flexible 3 m Extraction arm o 60 mm Funnel nozzle Easy Click 60 Kit 1 WF Nozzle With sloped nozzle Stop valve with bench mounting brackets Extraction hose flexible 3 m Extraction arm o 60 mm Sloped nozzle www.labem.pl 112 Fume Extraction Easy Click 60 Kit 1S WF Nozzle With sloped nozzle With 2 joint arms Order-no. T005 36 579 99 Consists of: T005 36 598 99 T005 36 575 99 T005 36 576 99 Model Description Kit 1S WF Easy-Click-60 2 joint aluminium arm with sloped sloped nozzle nozzle, length 1,5 m 2 joint arms Bench mounting brackets Extraction hose flexible 3 m Extraction arm o 60 mm, 0,7 m Sloped nozzle T005 36 577 99 Easy Click 60 Kit 1S WF Funnel With funnel nozzle With 1 joint arms Order-no. T005 87 627 63 Consists of: T005 87 627 47 Model Description Kit 1S WF Easy-Click-60 Extraction arm with funnel nozzle funnel nozzle with stop valve, length 1,20 m 1 joint arm with stop valve and bench mounting brackets Extraction hose flexible 3 m Extraction arm o 60 mm, 0,7 m Funnel nozzle T005 36 576 99 T005 36 573 99 www.labem.pl 113 Accessories Volume Extraction: Extraction Arms Easy Click 60 Extraction arm Order-no. T005 36 578 99 Description Extraction arm, flexible, O 60 mm for sloped and funnel nozzles, length 1 m T005 87 627 77 Extraction arm, flexible, O 60 mm for sloped und and funnel nozzles, length 1,5 m. on request Extraction arm, flexible, O 60 mm for sloped and funnel nozzles, length 0,7 m Easy Click 60 WF 32 O 32 mm Order-no. T005 36 580 99 Description ESD microscope extraction arm, flexible, O 32 mm Easy Click 60 Joint extraction arm With single pivot arm ESD Order-no. T005 87 627 47 Easy Click 60 Joint extraction arm Description Aluminium stativ extraction arm ESD safe. ESD With dual pivot arm ESD Order-no. T005 36 598 99 Description Aluminium stativ extraction arm, ESD safe www.labem.pl 114 Fume Extraction 300 mm 200 mm 0 mm 100 mm 100 mm 200 mm 300 mm 300 mm 200 mm 100 mm 0 mm 100 mm 200 mm 300 mm 100 mm 200 mm Easy Click 60 Funnel nozzle 300 mm 300 mm 200 mm 100 mm 100 mm 200 mm 300 mm Order-no. Model T005 36 573 99 WF 60 Description Funnel nozzle for flexible extraction arm, width 230 mm, high 100 mm Easy Click 60 Sloped nozzle Order-no. T005 36 577 99 Model WF 60 Description Sloped nozzle for flexible extraction arm Exhaust hood Bestell-Nr. T005 87 358 45 Beschreibung Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air soldering operations uses extraction hose 60. Metal black. Remote control 1 2 Order-no. 1 T005 87 359 09 2 T005 36 593 99 Description For WFE 2S, WFE 4S, Zero Smog 4V, WFE 20D, Zero Smog 20T For WFE 2X Order-no. T005 31 191 99 Description Interface cable RS 232, 2 m (78.74 in) for remote control or monitoring by PC (type 1:1) (T005 87 359 09) RS 232 Interface cable Order-no. T005 87 627 24 Description Adapter Remote control Zero Smog 4V Order-no. T005 87 647 10 Description Cable WX www.labem.pl Connection table see page 103 115 Accessories Volume Extraction Pre filter box For WFE 2X Order-no. T005 87 627 57 T005 87 627 58 Description Pre filter box for WFE 2X, Pre filter for large fine dust quantities Order-no. T005 36 591 99 Description Hanging Bracket for WFE 2X. For fixing WFE 2X on the work table. Pocket filtering F 7 for Pre filter box (5 pieces) Hanging Bracket for WFE 2X www.labem.pl 116 Fume Extraction Trolley with wheels For WFE 2X For mobile use Order-no. T005 36 592 99 Description Trolley with wheels for WFE 2X Exhaust connector For Zero Smog 6V Order-no. T005 87 358 40 Description Exhaust connector DN 100 for Zero Smog 6V and WFE 4S Exhaust connector For Zero Smog 4V Zero Smog 6V Order-no. T005 87 359 15 Description Exhaust connector DN 75 for WFE 2S, Zero Smog 4V, Zero Smog 6V and WFE 4S www.labem.pl 117 Accessories Installation Volume Extraction Easy Click 60 Extension hose 1 m, 3 m, 5 m ESD Order-no. T005 87 354 27 T005 36 576 99 T005 87 627 56 Description Extension hose 1 m Extension hose 3 m Extension hose 5 m Extension hose 60 Sold by metre Order-no. T005 87 620 36 Description Extension hose, heavy construction, sold by metre (max. length 15 m) Order-no. T005 87 627 68 Description Hose connection 60 mm for flexible hose, sold by the metre T005 87 620 36. Order-no. T005 87 627 72 Description Female adapter for installation e.g. stop valve on fume extraction units Hose connection 60 mm Easy Click 60 Female adapter Easy Click 60 Male adapter Order-no. T005 87 627 55 Description Male adapter for hose extension, O 60 mm www.labem.pl 118 Easy Click 60 Hose connector, angle 90 Order-no. T005 87 627 67 Description Hose connector, straight for WFE 2S / WFE 4S, Zero Smog 4V / Zero Smog 6V and pre filter box Order-no. T005 87 627 69 Description Hose connector, angle 90 for WFE 2S / WFE 4S, Zero Smog 4V / Zero Smog 6V and pre filter box Easy Click 60 WFV 60 Stop valve Order-no. T005 36 574 99 Description WFV 60 Stop valve incl. bench mounting brackets Order-no. T005 87 627 46 Description WFV 60 A Stop valve 230 V Order-no. T005 87 627 65 Description WFV 60 Stop valve for extraction arm Order-no. T005 87 628 08 Description Butterfly valve for WFV 60 stop valve Easy Click 60 WFV 60 A Easy Click 60 WFV 60 Stop valve Easy Click 60 Butterfly valve Spare www.labem.pl 119 Fume Extraction Easy Click 60 Hose connector, straight Accessories Installation Volume Extraction Easy Click 60 T-piece Order-no. T005 87 627 66 Easy Click 60 End Cap Order-no. T005 87 627 74 Description T-piece with 2 male connections and 1 female connection Description End Cap 60 mm click connections Hose adapter o 50 mm Order-no. T005 87 627 53 Description Hose adapter for WFE 2ES -with Silicon O-Ring, O 50 mm Bench mounting brackets Order-no. T005 36 575 99 Description Bench mounting brackets (2 clamp) www.labem.pl 120 Fume Extraction Adapter o 75 mm Order-no. T005 87 627 71 Description Adapter o 75 mm for Easy-Click 60 Adapter 40/60 Order-no. Description T005 87 627 5040/60 Adapter for Easy Click 60 Extraction arms on 50 mm WFEMP50 power socket Hose clamp 50 - 70 mm Order-no. T005 87 358 79 Description Hose clamps 50 - 70 mm, 2 pieces, for securing extraction hose 50 mm www.labem.pl 121 Accessories Fume Extraction F5 Fine dust filter M 5 F or WFE 2S, Zero Smog 4V 10 pieces Order-no. T005 87 359 37 Description Fine dust filter for WFE 2S, Zero Smog 4V F7 Fine dust filter F 7 F or WFE 2S, Zero Smog 4V 10 pieces Order-no. T005 87 359 38 Description Fine dust filter for WFE 2S, Zero Smog 4V Compact filter For WFE 2S, Zero Smog 4V Order-no. T005 87 359 36 Description Compact filter for WFE 2S, Zero Smog 4V, EPA filter E 12 EN 1822 and 50% active carbon, 50% Puratex Wide band gas filter For WFE 2S, Zero Smog 4V From October 2013 supplied in cardboard housing Order-no. T005 87 358 95 Description Compact filter for adhesive fume, wide band gas filter (50% active carbon, 50% Puratex) Filterset E 12 For WFE 2ES, WFE 2CS Order-no. Description T005 87 627 01 Filterset E 12 with 10 Prefilter M 5, EPA Filter E 12, wide band gas filter (10% active carbon) www.labem.pl 122 Fume Extraction F5 Fine dust filter M 5 For WFE 2ES / CS 10 pieces Order-no. T005 87 627 03 Description Fine dust filter M 5 Compact filter For WFE 2X Order-no. T005 36 590 99 Description EPA Filter E 12, wide band gas filter (50% active carbon / 50% Puratex) Pocket filter F 7 for WFE 2X For Pre filter box WFE 2X Order-no. T005 87 627 58 Description Pocket filter for Pre filter box for WFE 2X Pocket filter F 7 For WFE 2S / WFE 4S, Zero Smog 4V / Zero Smog 6V Order-no. T005 87 358 60 Description Pocket filter F 7. For applications with a high fine dust rate. Order-no. T005 87 359 24 Description Filtering fine dust for sticky particles (e.g. large quantities of liquid flux) Filtring ash For Pre filter box For WFE 2S / WFE 4S, Zero Smog 4V / Zero Smog 6V www.labem.pl 123 Accessories Fume Extraction F5 Fine dust filter M 5 For Zero Smog 20T / WFE 20D and Zero Smog 6V / WFE 4S 10 pieces Order-no. T005 87 358 37 Description Fine dust filter M 5 F7 Fine dust filter F 7 For Zero Smog 20T / WFE 20D and Zero Smog 6V / WFE 4S 10 pieces Order-no. T005 87 358 36 Description Fine dust filter F 7 Compact filter For Zero Smog 20T / WFE 20D and Zero Smog 6V / WFE 4S Order-no. T005 87 358 38 Description Compact filter EPA filter E 12, wide band gas filter (50% active carbon, 50% Puratex) Adhesive fume filter For Zero Smog 6V / WFE 4S For adhesive fumes Order-no. T005 87 358 35 Description Compact filter for adhesive fumes, wide band gas filter (50% active carbon, 50% Puratex) www.labem.pl 124 Volume extraction systems require a large volume of air to be extracted and the level of vacuum is of lesser importance. This means that a relatively large diameter pipe system is required. If the pipe diameter was too small the flow resistance would increase and extraction capacity reduced. The pipe system 75 allows installations up to 30 m with the WFE 4S uses in a stand alone system. The pipe sections are designed to stick together and have internal sealing bushes. *PEHD = Polyethylen high density, PE = Polyethylen. Pipe 2 m Order-no. T005 87 358 70 Description Pipe 2 m, with seal at one end, plastic, PEHD black Right angle pipe 90 Order-no. T005 87 358 69 Description Right angle pipe, 90, 0,2 m, with seal at one end, plastic, PEHD black Order-no. T005 87 358 71 Description T-piece, 2 x 90, 0,5 m, with 3 seals, plastic, PEHD black T-piece 2 x 90 End seal Order-no. T005 87 358 55 Description End seal, PE, transparent Order-no. T005 87 358 64 Description Pipe clamps, PE, grey Pipe clamps Adapter Order-no. T005 87 358 63 T005 87 358 56 www.labem.pl Description Adapter PEHD pipe system 75 to pipe system 50, with seals 2 seals Adapter PEHD pipe system 75 to pipe system 50, without seals 125 Fume Extraction Pipe System 75 Volume Extraction Tip Extraction WFE Spare filter WFE P Safety rests Attachments and Accessories FE-Attachment Compressed air cleaning filter KHP 81 Extraction hose 5 mm KHE 81 Locking clip Top Oben Compact filter KHE / KHP 81 Additional safety rest Top Oben FE-Attachment FE Soldering Irons Compact filter for adhesive fumes FE 75 LT Soldering tips FE-Clip-Set Pipe O 6mm Top Oben Top Oben Fine dust filter F 7 FE 80 HT Soldering tips FE-Clip-Set Pipe O 4,5 mm Pipe system 50 and Accessories Pipe 2 m Double socket Right angle pipe 0, 0,2 m T-piece 2 x 90, 0,5 m End seal www.labem.pl 126 Branch 2 x 45, 0,3 m Pipe clamps Fume Extraction Zero Smog 20T Interface cable Remote control Exhaust connector WX Adapter for WX Zero Smog 20T with remote control Connection cable T005 87 647 10 T005 87 627 24 DN 100 Accessories Extraction hose 40, 1 m complete with 2 connecting elements Spare filter Extension hose 5,0 m, DN 17 Fine dust filter M 5 Fine dust filter F 7 Extraction hose 40, sold by metre Connection nipple DN 17 + Nut G 3/8" for connection nipple Connetion element Adapter DN 17 for connection extension hose 17 with 5 mm hose of FE iron Compact filter End cap Connection nipple for 5 mm hose of FE iron for direct connection to pipe system www.labem.pl 127 Aspirazione Tip Extraction dei fumi in punta The Weller FT Zero Smog Systems put an end to air pollution caused by soldering, adhesives and laser work. In all of these applications fumes or fine particles are released into the work place atmosphere which are hazardous to the staff exposed to them. The Weller Zero Smog Systems' combination of pumps, electronic controls and filters removes this hazard. Tip Extraction Weller FT FE soldering irons have an integral smoke tube mounted in the handle. It is positioned directly above the joint during the soldering process to collect any fumes generated. Fume extraction irons can be connected to Weller Zero Smog Systems WFE and WFE P bench mounted units driving up to 2 irons or Zero Smog 20T mobile unit driving up to 20 irons. Fume extraction attachments can be retro fitted to non fume extraction Weller soldering irons. ESD WFE For 2 soldering irons Compressed air operated Order-no. Model T005 36 402 99 WFE Description Portable fume extraction unit for tip suction, compressed air operated low sound level Scope of supply: Fume extraction unit Compressed air cleaning filter Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 WFE P For 2 soldering irons With built in pump low sound level Order-no. Model T005 36 386 99 WFE P Description Portable fume extraction unit for tip suction with built in pump (do not use for 24 h continuous operation) Scope of supply: Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 www.labem.pl 128 Fume Extraction Zero Smog 20T For 20 soldering irons low sound level Order-no. Model Description T005 36 4706 99 Zero Smog 20T Fume extraction unit 230 V / 50 Hz, for tip suction with built in turbine Scope of supply: Fume extraction unit 230 V / 50 Hz Compact filter (EPA filter E12 and wide band gas filter 50% active carbon / 50% Puratex) Fine dust filter F 7 Specifications Zero Smog 20T Dimensions L x B x H Weight Mains supply voltage Electrical power rating Fuse Maximum vacuum Maximum quantity supplied Noise emission level Pre filter Stage 1 Combined filter Stage 2,3 RS232 port USB port 450 x 450 x 695 mm 45 kg T005 36 706 99: 230 V / 50 Hz T005 36 702 99: 120 V / 60 Hz 530 VA T 3, 15 A 10.000 Pa 100 m3/h 51 dB(A) Pre filter mat class F7 Combined E12 high efficiency submicron filter (99.95 % particle separation upto 0.12 m) and wide band gas filter (50 % activated carbon, 50 % Puratex) All system functions can be operated and remotely monitored via the RS232 port. The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically. www.labem.pl 129 Accessories Tip Extraction FE 75 Set Order-no. T005 33 151 99 Scope of supply: T005 29 166 99 T005 15 020 99 T005 87 447 28 T005 25 409 99 Model FE 75 Set Description FE-Soldering iron Set 80 W / 24 V FE 75 KH 20 FE-Soldering iron 80 W / 24 V with soldering tip LT B Safety rest Funnel for FE 75 Cleaning brush for FE tube Model FE 80 Description FE-Soldering iron 80 W / 24 V FE 80 Order-no. T005 26 162 99 Scope of supply: FE 80 FE-Soldering iron 80 W / 24 V with soldering tip HT B T005 87 337 59 Funnel for FE 80 T005 25 409 99 Cleaning brush for FE tube Please order related safety rest KH 20 separately! Accessories for FE-soldering irons Safety rest KH 20 Order-no. T005 15 020 99 Description KH 20 Safety rest Order-no. T005 36 352 99 Description Locking clip for extraction hose Order-no. T005 25 410 00 Description Extraction hose (spare), by metre, 5 mm Locking clip Extraction hose 130 www.labem.pl Fume Extraction FE attachments A range of FE attachments is available to fit to Weller soldering and desoldering irons to convert standard products to fume extraction versions. The attachments are supplied with all necessary fittings and hoses. The performance of the retro fitted tools is not affected. Order-no. T005 25 125 99 Description FE-attachment for LR 21, LR 82, TCPS, W 61, W 101, WP 200, WXP 200 WSP 150 T005 28 126 99 FE-attachment for WSF 80D5/D8 for AKS safety rest T005 13 125 99 FE-attachment for DS 22, DS 80 and DSX 80 desoldering iron Universal FE attachments For Weller soldering irons WP 80, WSP 80, WMP, WMRP, MLR 21 or soldering irons with handle diameter O 10-13 mm. Clip will be fasten with an O-ring to the soldering iron. Order-no. T005 29 186 99 Description FE-attachment with tube O 6 mm for WSP 80, WP 80, MLR 21, WMP, WP 120 T005 29 214 99 FE-attachment with tube, O 6 mm for WP 65 and WP 120 T005 29 185 99 FE-attachment with tube O 4,5 mm, for WMRP and WSP 80, WP 80, MLR 21, MLR 80, WMP, for fine soldering applications T005 87 448 75 T005 87 448 76 FE-Clip-Set for FE-attachment, tube O 4,5 mm FE-Clip-Set for FE-attachment, tube O 6,0 mm T005 87 657 98 T005 87 657 99 FE-Add-on kit, attachment tube O 6 mm WXP 120 FE-Add-on kit, attachment tube O 6 mm WXP 65 Safety rest WDH 50 With Stop+Go function Order-no. Model T005 15 156 99 WDH 50 www.labem.pl Description Safety rest with Stop+Go function for WMRP iron with FE-attachment 131 Accessories Tip Extraction Compressed air cleaning filter Top Oben For WFE and WFE P Order-no. T005 87 357 57 Description Compressed air cleaning filter (active carbon) Compact filter Top Oben For WFE and WFE P Order-no. T005 36 410 99 Description Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) Compact filter For adhesive fumes For WFE and WFE P Top Oben Order-no. T005 36 407 99 Description Compact filter (EPA filter E 12 and wide band gas filter 100% active carbon Fine dust filter F 7 For WFE and WFE P 3 pieces Top Oben Order-no. T005 36 421 99 Description Fine dust filter F7 Compact filter For Zero Smog 20T / WFE 20D Order-no. T005 87 358 38 Description Compact filter (EPA filter E 12 and wide band gas filter 50% active carbon / 50% Puratex) www.labem.pl 132 Fine dust filter M 5 For Zero Smog 20T / WFE 20D 10 pieces Order-no. T005 87 358 37 Description Fine dust filter M 5 for Zero Smog 20T / WFD 20D F7 Fine dust filter F 7 ForZero Smog 20T / WFE 20D 10 pieces Order-no. T005 87 358 36 Description Fine dust filter F 7 for Zero Smog 20T / WFD 20D Pipe System 50 Tip extraction systems demand a high value and constant level of vacuum across the installation, the volume of air extracted is of lesser importance. To achieve this it is necessary to use a pipe system with Zero Smog 20T small diameter. The Weller FT pipe system 50 allows extraction installations of up to 200 m when used with the WFE 20D unit in a stand alone system. The pipe sections are designed to stick together and have internal sealing bushes. In a central system, the FE irons are connected directly to the fume extraction units. *PEHD = Polyethylen high density Pipe 50, 2 m Order-no. T005 36 323 99 Description Pipe 2 m, with seal at one end, plastic, PEHD black Order-no. T005 36 322 99 Description Right angle pipe 90, 0,2 m, with seal at one end, PEHD black Order-no. T005 36 344 99 Description T-piece 2 x 90, 0,5 m, with 3 seals, plastic, PEHD black Order-no. T005 36 321 99 Description Branch 2 x 45, 0,3 m, with 2 seals, plastic, PEHD black Right angle pipe 50, 90 T-piece 50 2 x 90 Branch 50 2 x 45 www.labem.pl 133 Fume Extraction F5 Accessories Tip Extraction Pipe clamps 50 Order-no. T005 36 329 99 Description Pipe clamps for 50 pipe system, grey Order-no. T005 36 324 99 Description End seal, PE, transparent Order-no. T005 36 319 99 Description Double socket for pipe system 50, PEHD black End seal 50 Double socket 50 Extraction hose 40 Order-no. T005 36 316 99 Description Extraction hose 40, 1 m, O 40 mm, complete with 2 connecting elements Extraction hose 40 Order-no. T005 36 414 00 Description Extraction hose 40, O 40 mm, without connecting elements, sold by metre www.labem.pl 134 Fume Extraction Connection element 40-50 Order-no. T005 36 415 99 Description Connection element 40-50 Order-no. T005 36 326 99 Description Extension hose DN 17, 5 m Order-no. T005 36 338 99 Description Connection nipple for extraction hose 5 mm (T005 25 410 00) Order-no. T005 87 350 50 Description End cap for connection nipple (T005 36 338 99) Extension hose DN 17 End cap Adapter Order-no. T005 36 343 99 Description Adapter for connection extension hose 17 with 5 mm extraction hose (T005 36 326 99), 5 mm Connection nipple Order-no. T005 87 358 65 Description Connection nipple on extension hose DN 17 (T005 36 326 99) Order-no. T005 87 358 66 Description Nut G 3/8" for connection nipple (T005 87 358 99), 3 pieces Order-no. Description Nut G 3/8" Connection adapter T005 87 628 10 Connection adapter for Zero Smog 20 T www.labem.pl 135 Accessories Tip Extraction Safety Rests with Stop+Go function for FE Irons with WFE or WFE P The Weller safety rests with Stop+Go function are recommended accessories for FE irons using the WFE or WFE P extraction units. A fibre optic sensor switches the extraction unit on when the FE iron is removed from the safety rest and when the FE iron is replaced in the safety rest, after a short delay to gather the fumes from any solder on the tip it switches the unit off. This reduces running costs. ESD KHP Order-no. Model T005 15 086 99 KHP Description Basic unit pneumatic (for WFE) safety rest with Stop+Go function with fibre optic sensor for FE 75 and FE 80 Order-no. Model T005 15 076 99 KHE Description Basic unit electric (for WFE P) safety rest with Stop+Go function with fibre optic sensor for FE 75 and FE 80 Order-no. Model T005 15 080 99 KHE/P Description Second safety rest with fibre optic sensor for extending to 2 workplaces Order-no. Model T005 15 168 99 KHP 81 Description Basic unit electric (for WFE) safety rest with Stop+Go function with fibre optic sensor for WSP 80, WP 80, WP 120 KHE KHE/P KHP 81 www.labem.pl 136 Fume Extraction KHE 81 Order-no. Model T005 15 167 99 KHE 81 Description Basic unit electric (for WFE P) safety rest with Stop+Go function for soldering irons WSP 80, WP 80, WP 120 with fibre optic sensor KHE / KHP 81 Order-no. Model Description T005 15 161 72 WDH 10T OPTO Second safety rest for KHE / KHP with fibre optic sensor for extending to 2 workplaces KH 6 Order-no. T005 15 006 99 Model KH 6 Description Safety rest for FE 75, FE 80 WDH 30 Order-no. Model T005 15 152 99 WDH 30 Description Safety rest for FE 75, FE 80 and LR 21, LR 82 and TCPS with FE attachment www.labem.pl 137 Lotstationen Weller Safety Rests - Overview Tools AK 51 AKT 30 KH 4 KH 6 KH 18 KH 20 KH 20 + FE 75 funnel KH 20 + FE 80 funnel KH 25P KH 27 KHE/KHP KHE 81 / KHP 81 Power-Response WP 65 page 142 WP 120 page 144 WP 200 page 145 WXP 65 page 142 WXP 120 page 143 WXP 200 page 145 Silver-Line FE 75 page 126 / 130 / 148 FE 80 page 126 / 130 / 149 MPR 80 page 147 WP 80 page 146 WSP 80 page 146 WSP 150 page 147 Active Tip WMRP page 140 WMRT page 141 WXMP page 140 WXMT page 141 Standard-Line LR 21 page 149 WTA 50 page 158 Magnastat controlled low voltage soldering irons TCPS page 150 W 61 page 151 W 101 page 151 Desoldering irons DSX 80 page 154 DXV 80 page 155 WXDP 120 page 157 DSX 120 page 157 WXDV 120 page 155 Hot air irons HAP 1 page 158 HAP 200 page 159 HAP 3000 page 70 WXHAP 200 page 159 Inert gas soldering irons WP 80IG/120IG page 37 Solder feeder system WSFP 5/8 page 39 Standard safety rest Safety rest with Stop & Go function www.labem.pl 138 Alternative safety rest WDH 40 WDH 50 WDH 51 WDH 60 WDH 70 WPH 80 WMRTH www.labem.pl 139 Accessory WDH 10 WDH 10T WDH 10P WDH 20 WDH 20T WDH 30 WDH 30T WDH 31 Lotstationen Active-Tip Heating Technology Quick tip exchange without any tools E xtremely short heating time 100C/sec Energy saving by standby function Optimal reaction time ESD Optimum for soldering applications Optimal tool where heating element and sensor are integrated in the soldering tip. By lowering the soldering joint temperature a faster reaction time is possible. With this tool the performance is exactly at the solder joint. WXMP Set 40 W (55 W with RT 11), 12 V F or WX stations Fine slim soldering iron. Ideal for microscope work. High performance by integrated active soldering tip. 3 1 2 Order-no. T005 29 204 99 Model WXMP Set Description Micro soldering iron WXMP with safety rest Scope of supply 1 T005 29 203 99 WXMP 2 T005 44 603 99 3 T005 15 171 99 RT 3 WDH 51 Micro soldering iron WXMP 40 W, 12 V with Active-Tip Heating Technology Standard soldering tip, chisel 1,3 x 0,4 mm Safety rest with dry cleaner RT Soldering tip series page 164/165 WMRP Set 40 W (55 W with RT 11), 12 V Fine slim soldering iron. Ideal for microscope work. 3 High performance by integrated active soldering tip. 1 RT Soldering tip series page 164/165 4 2 Order-no. T005 29 190 99 Scope of supply 1 T005 29 171 99 2 T005 44 603 99 3 T005 15 156 99 Accessory 4 T005 87 518 16 Model WMRP Set Description Micro soldering iron WMRP with safety rest WMRP Micro soldering iron WMRP 40 W, 12 V mit with Active-Tip Heating Technology Standard soldering tip, chisel 1,3 x 0,4 mm Safety rest with dry cleaner RT 3 WDH 50 racket can be plugged sidewards into B the rest and hold 2 RT tips www.labem.pl 140 Soldering WXMT Set Desoldering 3 x 40 W, 12 V 2 For WX stations Slim tweezers. Ideal for soldering and desoldering of very small SMD components. RTW Soldering tip series page 166/167 2 1 Order-no. Model T005 13 178 99 WXMT Set Description Micro desoldering tweezers WXMT with safety rest Scope of supply 1 T005 13 177 99 WXMT Micro desoldering tweezers 2 x 40 W, 12 V (hand piece without tips) with Active-Tip Heating Technology 2 T005 44 652 99 3 T005 15 169 99 RTW 2 WDH 60 Soldering tiplet, 0,7 x 0,4 mm, 45 Safety rest with dry cleaner WMRT Set 3 x 40 W, 12 V 2 For rework stations WR 3M Slim tweezers. Ideal for soldering and desoldering of very small SMD components. 1 RTW Soldering tip series page 166/167 2 Order-no. Model T005 13 173 99 WMRT Set Scope of supply 1 T005 13 174 99 WMRT 2 T005 44 652 99 3 T005 15 146 99 RTW 2 WMRTH Description Micro desoldering tweezers WMRT with safety rest Micro desoldering tweezers 2 x 40 W, 12 V (hand piece without tips) with Active-Tip Heating Technology Soldering tiplet, 0,7 mm x 0,4 mm, 45 Safety rest www.labem.pl 141 Lotstationen Technology Power-Heating Beneficial soldering tip prices Max. heating transfer Soldering tip in optimized sensor position Fast reaction time ESD Power-Response Heating Technology Due to an optimized sensor position a high perfomance is given. With a wide range of beneficial soldering tips these tools are an alternative to the micro soldering irons. WXP 65 Set 3 5 W, 24 V 6 Small fast soldering iron with 65 W for for WX stations. Qualified for fine solder jobs with high heating demand. 1 2 XNT Soldering tip series page 168/169 Order-no. T005 29 212 99 Scope of supply 1 T005 29 211 99 2 T005 44 851 99 3 T005 15 121 99 Optional: T005 29 211 70 Model WXP 65 Set Description Soldering iron WXP 65 with safety rest WXP 65 XNT A WDH 10 Soldering iron 65 W, 24 V with Power-Response Heating Technology Standard soldering tip, Chisel, 1,6 x 0,4 mm Safety rest with dry cleaner WXP 65 Set WXP 65 Set with cable 2,5 m WP 65 Set 3 5 W, 24 V 6 Small fast soldering iron with 65 W. Qualified for fine solder jobs with high heating demand. XNT Soldering tip series page 168/169 1 2 Order-no. T005 29 216 99 Model WP 65 Set Description Set Soldering iron WP 65 with safety rest Scope of supply 1 T005 29 215 99 WP 65 2 T005 44 851 99 3 T005 15 121 99 XNT A WDH 10 Soldering iron 65 W, 24 V with Power-Response Heating Technology Standard soldering tip, Chisel, 1,6 x 0,4 mm Safety rest with dry cleaner Accessory for both sets: T005 87 657 58 Barrel www.labem.pl 142 Soldering WXP 120 Set 20 W, 24 V 1 Allrounder with 120 watts. For soldering applications from small to large components with high temperature demand. XT Soldering tip series page 172/173 3 1 2 Order-no. T005 29 202 99 Model WXP 120 Set Description Soldering iron WXP 120 with safety rest Scope of supply 1 T005 29 201 99 WXP 120 2 T005 44 704 99 3 T005 15 121 99 XT B WDH 10 Soldering iron 120 W, 24 V with Power-Response Heating Technology Standard soldering tip, XT B, Chisel 2,4 x 0,8 mm Safety rest with dry cleaner Accessory T005 87 657 11 Barrel WXP 120 Solar 20 W, 24 V 1 For solar modules 2,5 m connection cable 1 2 XT Soldering tip series page 172/173 Order-no. T005 29 210 99 Model WXP 120 Solar Description Soldering iron WXP 120 Scope of supply 1 T005 29 201 99 WXP 120 2 T005 44 730 99 XTDDH 45 Soldering iron 120 W, 24 V with Power-Response Heating Technology Soldering tip 4 mm slopped Accessory: T005 87 657 11 Barrel www.labem.pl 143 Power-Response Heating Technology WP 120 Set 20 W, 24 V 1 Allrounder with 120 watts. For soldering applications from small to large components with high temperature demand. 3 1 XT Soldering tip series page 172/173 2 Order-no. T005 29 194 99 Model WP 120 Set Description Soldering iron WP 120 with safety rest Scope of supply 1 T005 29 193 99 WP 120 2 T005 44 704 99 3 T005 15 161 99 XT B WDH 10T Soldering iron 120 W, 24 V with Power-Response Heating Technology Standard soldering tip, XT B, Chisel 2,4 x 0,8 mm Safety rest with Stop & Go function with dry cleaner Accessory T005 87 657 09 Spare barrel WP 120 Solar 1 20 W, 24 V 1 For solar modules 2,5 m connection cable 2 XT Soldering tip series page 172/173 Order-no. Model T005 29 207 99 WP 120 Solar Scope of supply 1 T005 29 207 99 WP 120 Solar 2 T005 44 730 99 Accessory T005 87 637 43 XTDDH 45 Description Soldering iron WP 120 with safety rest, with 2,5 m connection cable Soldering iron 120 W, 24 V with Power-Response Heating Technology XTDDH 45 4 mm slopped Spare barrel www.labem.pl 144 Soldering WXP 200 Set 00 W, 24 V 2 High Power soldering iron compatible to the WX stations. Ideal for applications with a high temperature demand e.g. LED backpanels or HF shieldings 3 1 2 XHT Soldering tip series page 176 Order-no. T005 29 206 99 Model WXP 200 Set Description Soldering iron WXP 200 with safety rest Scope of supply 1 T005 29 205 99 WXP 200 2 T005 44 801 99 3 T005 15 158 99 XHT D WDH 31 Soldering iron 200 W, 24 V with Power-Response Heating Technology Standard soldering tip, 5,0 x 1,2 mm Safety rest with dry cleaner Accessory T005 87 637 25 WP 200 Set 00 W, 24 V 2 High Power soldering iron. Ideal for applications with a high temperature demand e.g. LED backpanels or HF shieldings Barrel 3 1 2 XHT Soldering tip series page 176 Order-no. T005 29 200 99 Model WP 200 Set Description Soldering iron WP 200 with safety rest Scope of supply 1 T005 29 199 99 WP 200 2 T005 44 801 99 3 T005 15 158 99 XHT D WDH 31 Soldering iron 200 W, 24 V with Power-Response Heating Technology Standard soldering tip, 5,0 x 1,2 mm Safety rest with dry cleaner Accessory T005 87 637 25 www.labem.pl Barrel 145 Lotstationen Silver-Line Heating Technology Effective heat transfer Wide soldering tip range Universal use ESD Silver-Line Heating Technology Approved heating technology with effective heat transfer. For all purpose industrial applications. A wide range of soldering tips are available. WSP 80 Set 3 0 W, 24 V 8 Fast and precise reach of soldering temperature. Slim iron design For all purpose soldering jobs 2 LT Soldering tip series page 177-180 1 Order-no. T005 33 125 99 Scope of supply 1 T005 29 161 99 2 T005 44 405 99 3 T005 15 170 99 Accessory T005 87 447 10 Model WSP 80 Set Description Soldering iron WSP 80 with safety rest WSP 80 Soldering iron 80 W, 24 V with Silver-Line Heating Technology Soldering tip chisel 2,4 x 0,8 mm Safety rest with sponge LT B KH 18 Barrel for WSP 80 (spare) WP 80 Set 3 80 W, 24 V Soldering iron WP 80 with short tip-to-grip design. Comfortable safety rest with 4 step varying inclination LT Soldering tip series page 177-180 2 1 Order-no. T005 29 181 99 Model WP 80 Set Description Soldering iron WP 80 with safety rest WP 80 Soldering iron 80 W, 24 V with Silver-Line Heating Technology Soldering tip chisel 2,4 x 0,8 mm Safety rest with dry cleaner Scope of supply 1 T005 29 180 99 2 T005 44 405 99 3 T005 15 121 99 Accessory T005 87 448 46 T005 87 448 45 146 LT B WDH 10 arrel long, 55 mm B Barrel short, 40 mm www.labem.pl Soldering 3 WSP 150 Set 150 W, 24 V For soldering applications with high temperature demand 1 2 LHT Soldering tip series page 183 Order-no. T005 29 189 99 Model WSP 150 Set Description Soldering iron WSP 150 with safety rest Scope of supply 1 T005 29 170 99 WSP 150 2 T005 44 450 99 3 T005 15 152 99 LHT F WDH 30 Soldering iron 150 W, 24 V with Silver-Line Heating Technology Soldering tip chisel 9,3 x 2,0 mm Safety rest with dry cleaner 3 MPR 80 Set 80 W, 24 V S oldering iron with an adjustable head up to 40 1 LT Soldering tip series page 177-180 2 Order-no. T005 33 131 99 Model MPR 80 Set Description Soldering iron MPR 80 with safety rest Scope of supply 1 T005 29 163 99 MPR 80 2 T005 44 405 99 3 T005 15 033 99 LT B KH 25P Soldering iron 80 W, 24 V, with Silver-Line Heating Technology Soldering tip chisel 2,4 x 0,8 mm Safety rest with sponge Accessory T005 87 447 10 Barrel for WSP 80 (spare) www.labem.pl 147 Silver-Line Heating Technology Weller FE soldering irons are specifically designed for tip extraction applications (tip extraction see page 126). The fume extraction tube is integrated to the iron and positioned above the soldering tip. Regardless the iron is ergonomical and allows precise work. The FE soldering irons are controlled electronically and can be connected to all Weller soldering sations except WX stations. Different perfomances and the wide range of Weller soldering tips gives a multi-puropse applications to the FE irons. Weller FE soldering irons are delivered with a 5,0 mm heat resistant fume extraction hose (2,5 mm). Irons are ESD safe. ESD 2 FE 75 Set 80 W, 24 V For tip extraction 1 LT Soldering tip series page 177-180 Order-no. T005 33 151 99 Scope of supply 1 T005 29 166 99 2 T005 44 405 99 3 T005 15 020 99 T005 87 447 28 T005 25 409 99 Accessory T005 87 447 10 Model FE 75 Set Description Soldering iron FE 75 with safety rest FE 75 FE-Soldering iron 80 W, 24 V with Silver-Line Heating Transfer Soldering tip chisel 2,4 x 0,8 mm Safety rest with sponge Funnel for FE 75 Cleaning brush for extraction tube LT B KH 20 Barrel for FE 75 (spare) www.labem.pl 148 Soldering FE 80 80 W, 24 V For tip extraction HT Soldering tip series page 185 Order-no. T005 26 162 99 Model FE 80 Description FE-Soldering iron Scope of supply T005 26 162 99 FE 80 HT 2 FE-Soldering iron 80 W, 24 V with Silver-Line Heating Transfer Soldering tip Funnel for FE 80 Cleaning brush for extraction tube WDH 30 Safety rest T005 44 261 99 T005 87 337 58 T005 25 409 99 Accessory T005 15 152 99 LR 21 Set 3 50 W, 24 V For standard soldering applications 2 1 LT Soldering tip series page 177-180 Order-no. T005 29 187 99 Model LR 21 Set Description Soldering iron LR 21 with safety rest Scope of supply 1 T005 25 106 99 LR 21 2 T005 44 415 99 3 T005 15 152 99 LT M WDH 30 Soldering iron 50 W, 24 V with LT-B soldering tip adapter Standard soldering tip, LT M, 3,2 mm X 1,2 mm Safety rest with dry cleaner www.labem.pl 149 Magnastat Soldering Iron The Magnastat system operates through a ferro-magnetic senor device which changes its characteristics whe specific temperatures are reached. This causes it to either attract or repel a permanant magnet which operates a power supply switch. In this way power to the heating element can be quickly switched on or off to either provide extra power. Magnastat Controlled Low Voltage Soldering Iron TCPS 0 W, 24 V 5 3 wire silicone cord and plug for Weller WTCP 51 Magnastat soldering station. Hard grounded LT Soldering tip series page 177-180 Order-no. Model T00 532 105 99 TCPS Description Magnastat Soldering iron 50 W, 24 V with adapter PT 7 (370C) and soldering tip LT M Order-no. Model T005 10 001 99 TCP 24 Description Magnastat Soldering iron 50 W, 24 V, with adapter PT 7 (370C) and soldering tip LT M TCP 24 0 W, 24 V 5 2 wire silicone cord without plug No grounding possible LT Soldering tip series page 177-180 TCP 42 5 W, 24 V 4 2 wire cord (4 m) without plug LT Soldering tip series page 177-180 Order-no. Model T005 10 055 71 TCP 42 Description Magnastat Soldering iron 45 W, 24 V, with adapter PT 7 (370C) and soldering tip LT M Order-no. Model T005 10 053 99 TCP 12 Description Magnastat Soldering iron 30/40 W, 12/14 V, with adapter PT 7 (370C) and soldering tip LT M TCP 12 m cord with battery 3 clamps e.g. for car battery LT Soldering tip series page 177-180 www.labem.pl 150 Soldering Magnastat controlled line voltage soldering irons W 61 60 W, 230 V CT 5 Soldering tip series page 188 Order-no. Model T005 61 036 99 W 61 Description Line voltage soldering iron 60 W, 230 V, Magnastat controlled Order-no. Model T005 61 046 99 W 101 Description Low voltage soldering iron 100 W, 230 V, Magnastat controlled W101 00 W, 230 V 1 Complete with soldering tip CT6E7 and safety rest CT 6 Soldering tip series page 189 W 101SP 00 W, 230 V 1 Complete with welding wedge Teflon coated 50 x 40 x 4 mm, twist lock and safety rest Welding wedge spare page 189 Order-no. Model T005 61 096 99 W 101SP Description Line voltage soldering iron 100 W, 230 V, Magnastat controlled with welding wedge (260C-295C) Order-no. Model T005 61 056 99 W 201 Description Line voltage soldering iron 200 W, 230 V, Magnastat controlled W 201 00 W, 230 V 2 Complete with soldering tip CT2F7 and safety rest CT 2 Soldering tip series page 190 www.labem.pl 151 Unregulated Line Voltage Soldering Iron Robust heating elements of special steel between natural mica-leaves, embedded in cast ceramics and first-class material make the Weller SPI irons outstanding in technology and life-time. Ideal for professional applications in crafts and schools. SPI 16 5 W, 230 V 1 Heating up time approx. 180 sec. Tip temperature approx. 360C SPI 16-Soldering tip series page 191 Order-no. Model T005 64 005 99 SPI 16 Description Line voltage soldering iron unregulated 15 W, 230 V Scope of supply Complete with soldering tip 4SPI15212 chisel tip 1,2 mm and safety rest SPI 27 5 W, 230 V 2 Heating up time approx. 180 sec. Tip temperature approx. 410C SPI 27-Soldering tip series page 191 Order-no. Model T005 64 021 99 SPI 27 Description Line voltage soldering iron unregulated 25 W, 230 V Scope of supply Complete with soldering tip 4SPI26206 chisel tip 1,2 mm and safety rest www.labem.pl 152 Soldering SPI 41 0 W, 230 V 4 Heating up time approx. 180 sec. Tip temperature approx. 450C SPI 41-Soldering tip series page 191 Order-no. Model T005 64 037 99 SPI 41 Description Line voltage soldering iron unregulated 40 W, 230 V Scope of supply Complete with soldering tip 4SPI402224 chisel tip 2,0 mm and safety rest SPI 81w 0 W, 230 V 8 Heating up time approx. 180 sec. Tip temperature approx. 480C SPI 81-Soldering tip series page 191 Order-no. Model T005 64 053 99 SPI 81 Description Line voltage soldering iron unregulated 80 W, 230 V Scope of supply Complete with soldering tip 4SPI80237 chisel tip 5,0 mm and safety rest www.labem.pl 153 Desoldering Iron The desoldering irons of the X-series feature a novel threadless desoldering nozzle fixture system whereby the nozzle is inserted into the head and locked into place by applying a 1/4 turn. This patented feature allows the desoldering nozzles to be quickly and easily exchanged and also improves the rate of thermal transfer from the desoldering head to the desoldering nozzle providing the tools with a faster heating up time and recovery rate. Together with a 80 watts heating element the desoldering iron is qualified for solder joints where a high temperature is required. Desoldering iron with external solder collector (DSX 80) for SMD components. Same working position as usual soldering irons. Electronic temperature control. Micro finger switch for activating the vacuum pump. Various desoldering nozzles as well as CSF desoldering heads are available. ESD 2 DSX 80 Set 0 W, 24 V 8 With external solder collector Same working position as usual soldering irons 1 3/4 DX Desoldering nozzle series page 194 Order-no. Model T005 13 183 99 DSX 80 Set 1 2 3 4 Scope of supply T005 13 190 99 T005 15 152 99 T005 13 142 00 T005 13 143 00 T005 13 500 99 T005 13 603 99 DSX 80 WDH 30 DX 112 DX 113 Description Desoldering iron set 80 W, 24 V with threadless nozzle fixture system Desoldering iron 80 W, 24 V Safety rest Nozzle inner o 1,0 mm Nozzle inner o 1,2 mm Cleaning Set Gaskets for glastube (10 pieces) Accessory Order-no. T005 13 604 99 Description Filter for glastube (10 pieces) www.labem.pl 154 2 7 8 5 DXV 80 Set 0 W, 24 V 8 Internal solder reservoir For vertical applications 1 6 DX Nozzle series page 194 3/4 Order-no. Model T005 13 182 99 DXV 80 Set 1 2 3 4 5 6 7 8 Scope of supply T005 13 180 99 T005 15 153 99 T005 13 142 00 T005 13 143 00 T005 13 500 99 T005 87 418 15 T005 87 418 23 T005 87 067 94 Description Inline desoldering iron 80 W, 24 V with threadless nozzle fixture system DXV 80 WDH 40 DX 112 DX 113 Inline desoldering iron 80 W, 24 V Safety rest Nozzle inner o 1,0 mm Nozzle inner o 1,2 mm Cleaning Set Filter cartridge for DXV 80 (5 pieces) Brush for heating element Cone cleaner 2 WXDV 120 Set 20 W, 24 V 1 Temperature range 100C - 350C, 120 W, 24 V Heat-up time ca. 35 sec. (50C - 350C / 122 F- 662F) Setback capable Blue LED indication light Integrated tin collector Internal parameter storage 1 (Zero Tolerance) 2 Connectable to WXD 2 XDS Nozzle series page 197 1 Available from September 2013 Order-no. T005 13 205 99 Lieferumfang T005 13 204 99 T005 15 153 99 T005 87 658 01 T005 13 252 00 T005 13 254 00 T005 87 657 73 T005 87 657 72 T005 87 418 19 Model WXDV 120 Description Desoldering iron 120 W, 24 V WXDV 120 WDH 40 PDN Desoldering iron 120 W, 24 V Safety rest Pliers for desoldering nozzles XDS 3 Nozzle XDS 5 Nozzle Cleaning Set Cone cleaner Filter cartridge (5 pieces) www.labem.pl 155 Desoldering Inline desoldering iron with internal solder reservoir for vertical handling. Electronic temperature control. Micro finger switch controls quick start of fast action vacuum pump. Different nozzles and CSF heads are available. Desoldering Irons Maintenance set for Desoldering Irons and nozzles For cleaning nozzles and for nozzle exchange Order-no. T005 87 658 01 Description PDN Pliers for desoldering nozzles Order-no. T005 87 637 73 T005 13 500 99 Description Cleaning set for WXDP 120 and WSDV 120 Cleaning set for DSX 80 und DXV 80 Order-no. T005 87 657 78 T005 13 605 99 Description Glas tube for WXDP 120 Glas tube for DSX 120 and DSX 80 (4 pieces) Order-no. T005 87 657 72 T005 87 067 94 Description Cone cleaner for WXDP 120 / WXDV 120 / DSX 120 Cone cleaner for DSX 80 and DXV 80 Order-no. T005 13 500 99 Description Cleaning set complete Scope of supply T005 87 488 61 T005 13 501 99 Handle Spare needle set, 0,6 mm / 0,9 mm / 1,4 mm / 1,9 mm Accessory T005 13 502 99 T005 13 503 99 T005 13 504 99 Spare needle set, 1 x 1,9 mm, 3 x 0,9 mm Spare needle set, 1 x 1,9 mm, 3 x 0,5 mm Spare needle set, 1 x 1,9 mm, 3 x 1,4 mm www.labem.pl 156 Desoldering New products enlarge the WX family. A new WXD 2 desoldering station and a new WXDP desoldering iron. These tools are ideal for professional rework applications of the latest electronic components in the industrial operation. Typically for the WX stations: soldering and desoldering parameters can be saved easily on the iron. The WXDP 120 heats up within 35 sec. only. With stand-by function. WXDP 120 Set 2 20 W, 24 V High power 1 desoldering iron Heat up time 35 sec only Set-back function Push and pull technolgy: cartridge change with one hand possible Programmable, intelligent WX desoldering iron XDS-Nozzles page 197 1 Order-no. T005 13 202 99 Scope of supply 1 T005 13 201 99 2 T005 15 172 99 3 T005 87 657 78 T005 87 657 72 T005 87 657 73 T005 87 657 73 T005 87 658 01 Model Description WXDP 120 SetDesoldering iron 120 W, 24 V with excenter fixture WXDP 120 WDH 70 Desoldering iron 120 W, 24 V Safety rest with dry cleaner Glas tube with strap Cone cleaner Filter o 17 fur Glasrohr (10 pieces) Cleaning set WXDP / DSX 120 Pliers desoldering nozzles PDN DSX 120 20 W, 24 V High power 1 desoldering iron Heat up time 35 sec only, set-back function XDS-Nozzles page 197 1 2 Order-no. Model 1 T005 13 198 99 DSX 120 2 Scope of supply T005 13 604 99 XDS 1 Accessory T005 15 152 99 WDH 30 Description Desoldering iron 120 W, 24 V with excenter fixture, without safety rest. Safety rest must be ordered separately. Nozzle Safety rest with dry cleaner www.labem.pl 157 Hot Air Irons WTA 50 Set 3 Tweezers 50 W, 24 V F or desoldering of SMD components 2 1 WTA tips page 185 Order-no. T005 33 133 99 Scope of supply 1 T005 13 171 99 2 T005 44 141 99 3 T005 15 042 99 Model WTA 50 Set Description Tweezers WTA 50 with safety rest WTA 50 WTA 1 AK 51 Tweezers 2 x 25 W, 24 V Tip set, bent 45, 0,5 mm X 0,5 mm Safety rest The hot air irons HAP 1 and HAP 200 work with a temperature range from 50-550C. They provide a directional hot air flow that is adjustable. Finger switch controls adjustable pump. Different nozzles are available. ESD 3 HAP 1 Set 00 W, 24 V 1 Temperature range 50C to 550C Hot air flow ionic free Activated by finger switch 1 Hot air nozzles page 198-204 2 Order-no. T005 27 118 99 Model HAP 1 Set Description Hot air iron set 100 W, 24 V Scope of supply 1 T005 27 115 99 HAP 1 2 T005 87 278 21 3 T005 15 152 99 R 04 WDH 30 Hot air iron 100 W / 24 V with Hot air nozzle R 06 round o 3,0 mm Hot air nozzle round o 1,2 mm Safety rest with dry cleaner The hot air iron HAP 200 works with the rework station WR 3M only. www.labem.pl 158 Hot Air 3 HAP 200 Set 00 W, 24 V 2 Temperature range 50C to 550C Activated by finger switch Hot air nozzles page 198-204 1 2 Order-no. T005 27 117 99 Scope of supply 1 T005 27 116 99 2 T005 87 278 21 3 T005 15 152 99 T005 87 617 28 4 T005 87 278 22 Model HAP 200 Set Description Hot air iron set 200 W, 24 V HAP 200 R 04 WDH 30 Hot air iron 200 W / 24 V Hot air nozzle round o 1,2 mm Safety rest with dry cleaner Adapter M6 for HAP 200 Hot air nozzle o 3,0 mm R 06 2 WXHAP 200 Set 3 00 W, 24 V 2 Temperature range 50C to 550C Blue LED light Internal Parameter storage (zero tolerance) Hot air flow ionic free Hot air nozzles page 198-204 ESD 1 Available from September 2013 Order-no. T005 27 120 99 Scope of supply 1 T005 27 119 99 2 T005 15 152 99 4 T005 87 278 22 T005 87 278 21 T005 87 617 28 Model Description WXHAP 200 Set Hot air soldering iron set 200 W, 24 V WXHAP 200 WDH 30 R 06 R 04 Hot air iron 200 W / 24 V with hot air nozzle R 06 round o 3,0 mm Safety rest with dry cleaner Hot air nozzle o 3,0 mm Hot air nozzle round o 1,2 mm Adapter M6 for WXHAP 200 www.labem.pl 159 Recommended treatment of Soldering Tips Solutions for cleaning challenges with lead free solder! When using lead free it will be experienced an increased oxidation in the wettable area of the tip. These oxides must be removed regularly otherwise it will make the tip completely unwettable and not usable anymore. When cleaning the tip by means of the Weller WDC Dry Cleaner a special brass wool is used. First the surplus solder is removed by tapping the tip on the soft edge of the collector box.The final cleaning is then done by pushing and turning the tip in the brass wool. After cleaning there is still a fine layer of solder on the tip avoiding fast oxidation of the iron layer which is an advantage versus the cleaning by the wet sponge. The brass wool can be soaked in flux which may improve even the performance. Why dry cleaning? Best cleaning effect Soldering tip will be cleaned but stays wetted Flux will be removed Safe from oxidation Less temperature shock Individual cleaning methods Wet cleaning with cleaning sponge Dry cleaning with steel or brass wool To ensure continued pleasure of our products it is essential to use only genuine Weller parts. Weller`s soldering tip and heater form a unit and therefore a perfect heating system to produce high quality solder joints. Perfect interaction between the heater and soldering tip protects the soldering iron from irreparable damage. Other tips often damage the heating system. A manufacturer`s warranty is given only if genuine Weller replacement parts are used. Genuine Weller tips can be identified by the Weller marking on the shaft of the tip as well as the Genuine Weller seal on the packging. www.labem.pl 160 Soldering Tips Use all possiblities and accessories for lowering the soldering tip temperature Stand-by mode Auto-off mode Safety rests with Stop & Go function Tools with Acceleration sensor After use wet the soldering tip again - with Weller WSW Always use the lowest possible tip temperature and add sufficient solder to the tip before placing the iron back to the safety rest. High power infra-red preheating plate Support for hand soldering processes without risking overheating Tip activator Regeneration of oxidized tips. Use when tip is hot. Dry cleaning with WDC Soldering tip will be cleaned but stays wetted. Flux will be removed. Best treatment for soldering tips. Polishing bar WPB 1 Removes compact oxid films and regenerates tip surfaces when tip is cold. www.labem.pl 161 Weller Summary Soldering Tips Soldering Tips XT XTR LTR ET XHT XNT RT RTW LT NT LHT HT WTA PT Soldering Tools Page Page Page Page Page Page Page Page Page 177/ Page Page Page Page Page 172 / 173 175 182 184 176 168 / 169 164 / 165 166 / 167 Fast response 178/179/180 170 183 185 185 186 / 187 WP 65 Page 142 120 WP Page 144 WP 200 Page 145 WXP 65 Page 142 120 WXP Page 143 WXP 200 Page 145 Silver-Line Page 130 /148 / 126 FE 75 FE 80 Page 130, 149, 126 MPR 80 Page 147 WP 80 Page 146 WSP 80 Page 146 WSP 150 Page 147 Active-Tip WMRP Page 140 WMRT Page 141 WXMP Page 140 WXMT Page 141 Standard-Line LR 21 Page 149 with Ad. LR 82 WTA 50 Page 158 Unregulated Line Voltage Soldering Irons SPI 16,27,41,81 Page 152, 153 Magnastat Controlled Line Voltage Soldering Irons Page 150 TCPS,TCP 12,TCP 24 with Ad. Page 151 W 61,101,201 Desoldering Irons DS 22,80,DSV 80 DSX 80 Page 154 DXV 80 Page 155 WXDP 120 Page 157 DSX 120 Page 157 WXDV 120 Page 155 Hot Air Irons Page 158 / 159 HAP 1,HAP 200 HAP 3000 Page 70 WXHAP 200 Page 159 Gas Powered Soldering Irons Page 43 Pyropen Jr. Pyropen and P. Piezo Page 42 WP 60 Page 43 Inert Gas Soldering Irons WSP 80IG Page 37 WSP 120IG Page 37 Heating Elements HER 120 Page 35 HER 80 Page 35 www.labem.pl 162 188 / 189 / 190 191 195 194 198 198 199 199 200 201 202 203 197 192 193 192 XT soldering head Page 173 / 174 www.labem.pl 163 Soldering Tips CT SPI DS DX F R D Q NR ND NQ NQT XDS 60 70 71 Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Soldering Tips RT Soldering Tip Series Soldering Tips for Soldering irons WMRP, WXMP WMRP / WXMP Excellent heat transfer and sensors Soldering tips can be changed quickly and easily Excellent reaction time Extremely short heating time Fine slim soldering iron. Ideal for microscope work. High performance by integrated active soldering tip. 40 W (55 W with RT 11), 12 V Chisel Oa mm b mm Order-no. Type Oa mm b mm Order-no. RT 1SC 0,4 0,15 T005 44 612 99 RT 1SCMS 0,4 0,15 T005 44 615 99 RT 1SCNW* 0,3 0,1 T005 44 626 99 RT 1SCNWMS* 0,3 0,1 T005 44 626 71 RT 3 1,3 0,4 T005 44 603 99 RT 3MS 1,3 0,4 T005 44 616 99 RT 4 1,5 0,4 T005 44 604 99 RT 4MS 1,5 0,4 T005 44 618 99 RT 8 2,2 0,4 T005 44 608 99 RT 8MS 2,2 0,4 T005 44 622 99 RT 9 0,8 0,4 T005 44 609 99 RT 9MS 0,8 0,4 T005 44 623 99 RT 11 3,6 0,9 T005 44 611 99 RT 11MS 3,6 0,9 T005 44 631 99 RT 5 30 0,8 0,4 T005 44 605 99 RT 5MS 30 0,8 0,4 T005 44 619 99 RT 3XMS 30 1,3 0,5 T005 44 603 73 TypeRT RT a c b Sloped Type a mm Order-no. Type a mm Order-no. RT 6 45 1,2 T005 44 606 99 RT 6MS 45 1,2 T005 44 620 99 a * none wettable www.labem.pl 164 MS tips: separate grounded Soldering Tips Conical a Gull Wing b c Type Oa mm Order-no. Type Oa mm Order-no. RT 1 0,2 T005 44 601 99 RT 1MS 0,2 T005 44 614 99 RT 1NW* 0,1 T005 44 625 99 RT 1NWMS* 0,1 T005 44 625 71 RT 2 0,8 T005 44 602 99 RT 2MS 0,8 T005 44 617 99 RT 12MS 25 0,5 T005 44 632 99 RT 13MS 30 0,4 T005 44 633 99 Type Oa mm b mm Order-no. Type Oa mm b mm Order-no. RT 10GW 1,2 2,0 T005 44 610 99 RT 10GWMS 1,2 2,0 T005 44 624 99 a Knife Type Oa mm Order-no. Type Oa mm Order-no. RT 7 45 2,2 T005 44 607 99 RT 7MS 45 2,2 T005 44 621 99 a MS tips: separate grounded Measuring tip Type Order-no. Measuring tip T005 44 613 99 * none wettable MS handles and MS soldering tips have to be used together. MS soldering tips are for use with MS handles only (WXMP MS / WMRP MS) MS handles for RT MS soldering tips T005 29 213 99 WXMP MS soldering iron handle packed T005 29 217 99 WXMP MS soldering iron with safety rest WDH 51 T005 29 192 99 WMRP MS soldering iron handle packed www.labem.pl 165 Soldering Tips RTW Soldering Tip Series Soldering tips for desoldering tweezers WMRT, WXMT WXMT / WMRT Slim tweezers. Ideal for soldering and desoldering of very small SMD components. Excellent heat transfer and sensors Solder tips can be changed quickly and easily Excellent reaction time Extremely short heating time 2 x 40 W, 12 V RTW = tweezers Chisel Oa mm b mm Order-no. Type Oa mm b mm Order-no. RTW 2 45 0,7 0,4 T005 44 652 99 RTW 2MS45 0,7 0,4 T005 44 657 99 RTW 3 45 3,0 1,0 T005 44 653 99 RTW 3MS 45 3,0 1,0 T005 44 658 99 RTW 4 45 6,0 1,0 T005 44 654 99 RTW 4MS 45 6,0 1,0 T005 44 659 99 RTW 9 3,0 1,0 T005 44 666 99 RTW 9MS 3,0 1,0 T005 44 669 99 RTW 11 6,0 1,0 T005 44 667 99 RTW 11MS 6,0 1,0 T005 44 670 99 RTW 10 10,0 1,0 T005 44 668 99 RTW 10MS 10,0 1,0 T005 44 671 99 RTW 8 1,3 0,4 T005 44 664 99 RTW 8MS 1,3 0,4 T005 44 665 99 RTW 7NWMS* 0,8 0,4 T005 44 663 71 Type a RTW b www.labem.pl 166 Soldering Tips Conical a Type Oa mm Order-no. Type Oa mm Order-no. RTW 1 45 0,4 T005 44 651 99 RTW 1MS 45 0,4 T005 44 655 99 RTW 6NW* 45 0,2 T005 44 656 99 RTW 6NWMS* 45 0,2 T005 44 656 71 * none wettable MS tips: separate grounded MS handles and MS soldering tips have to be used together. MS soldering tips are for use with MS handles only (WXMT MS / WMRT MS) MS handles for RTW MS soldering tips T005 29 213 99 WXMT MS Micro tweezers handle packed T005 29 217 99 WXMT MS Micro tweezers with safety rest WDH 60 T005 29 192 99 WMRT MS Micro tweezers handle without tips www.labem.pl 167 Soldering Tips XNT Soldering Tip Series Soldering Tips for Soldering irons WXP 65, WP 65 WXP 65 / WP 65 Interchangeable soldering tips at low prices Maximum heat transfer Heater with improved sensor position Fast recovery time Small fast soldering iron. Suitable for fine solder jobs with high heating demand. 65 W, 24 V Chisel a c Oa mm b mm c Order-no. mm Type Oa mm b mm c Order-no. mm XNT 1SCNW* 0,3 0,1 27,0 T005 44 881 99 T005 44 881 10 XNT C 3,2 0,8 27,0 T005 44 858 99 T005 44 858 10 XNT 1SC 0,4 0,15 27,0 T005 44 862 99 T005 44 862 10 XNT D 4,0 0,8 28,0 T005 44 853 99 T005 44 853 10 XNT H 0,8 0,4 28,0 T005 44 859 99 T005 44 859 10 XNT HX 30 0,8 0,4 36,5 T005 44 873 99 T005 44 873 10 XNT K 1,2 0,4 28,0 T005 44 860 99 T005 44 860 10 XNT 4X 45 1,2 0,4 34,6 T005 44 874 99 T005 44 874 10 XNT A 1,6 0,4 28,0 T005 44 851 99 T005 44 851 10 XNT AX 1,6 0,8 28,0 T005 44 864 99 T005 44 864 10 XNT 6 1,6 0,4 29,5 T005 44 856 99 T005 44 856 10 XNT BX 2,4 0,8 36,5 T005 44 882 99 T005 44 882 10 XNT B 2,4 0,8 27,0 T005 44 857 99 T005 44 857 10 XNT MX 3,2 0,8 37,5 T005 44 883 99 T005 44 883 10 Type a mm Order-no. Type a mm Order-no. XNT 4 1,2 T005 44 855 99 T005 44 855 10 XNT CC 45 3,2 T005 44 886 99 T005 44 886 10 XNT AA 45 1,6 T005 44 884 99 T005 44 884 10 XNT F 45 1,2 T005 44 887 99 T005 44 887 10 XNT BB 45 2,4 T005 44 885 99 T005 44 885 10 Type b Sloped a Conical XNT Typ Oa mm c mm Order-no. Typ Oa mm c mm Order-no. XNT 1 0,5 27,0 T005 44 850 99 T005 44 850 10 XNT S 0,4 37,5 T005 44 868 99 T005 44 868 10 Type Oa mm c mm Order-no. XNT KN 2,0 33,0 T005 44 863 99 T005 44 863 10 a Knife c a T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces * none wettable 168 www.labem.pl b c a Round c SMT a b mm c mm Order-no. XNT GW 1 2,0 33,0 T005 44 854 99 T005 44 854 10 XNT GW 1,5 27,5 T005 44 880 99 T005 44 880 10 Type Oa mm c mm Order-no. Type Oa mm c mm Order-no. XNT 1S 0,2 28,5 T005 44 852 99 T005 44 852 10 XNT 1X 0,4 28,0 T005 44 865 99 T005 44 865 10 XNT 1LX 0,2 T005 44 872 99 T005 44 872 10 XNT 1SLX 45 0,4 39,5 T005 44 875 99 T005 44 875 10 XNT Type Oa mm b mm c Order-no. mm Type Oa mm b mm c Order-no. mm XNT SMT 01 10,4 0,6 7,1 T005 44 876 99 XNT SMT 03 20,8 0,6 7,1 XNT SMT 02 16,8 0,6 7,1 T005 44 877 99 Soldering Tips Type Gull Wing T005 44 878 99 High Speed High Speed heat transfer Weller High Speed solder tip High Speed soldering tips provide enhanced heat transfer to the solder area. 12 s 24 s Weller standard tip 12 s High Speed Accessories 24 s Heat transfer to the solder area 35C 200C c Order-no. mm Type Oa mm 0,5 27,0 T005 44 888 99 T005 44 888 10 XNT S HS 0,4 T005 44 896 99 T005 44 896 10 XNT 1S HS 0,2 28,5 T005 44 889 99 T005 44 889 10 XNT AS HS 1,6 T005 44 897 99 T005 44 897 10 XNT 4 HS 1,2 T005 44 890 99 T005 44 890 10 XNT 1L HS 0,2 T005 44 898 99 T005 44 898 10 XNT 6 HS 1,6 0,4 29,5 T005 44 891 99 T005 44 891 10 XNT 1LX HS 0,2 XNT H HS 0,8 0,4 28,0 T005 44 892 99 T005 44 892 10 XNT HX HS 30 0,8 0,4 36,5 T005 44 900 99 T005 44 900 10 XNT K HS 1,2 0,4 28,0 T005 44 893 99 T005 44 893 10 XNT 4XHS 45 1,2 0,4 34,6 T005 44 901 99 T005 44 901 10 XNT AX HS 1,6 0,8 28,0 T005 44 894 99 T005 44 894 10 XNT 1SLX HS 45 0,4 39,5 T005 44 902 99 T005 44 902 10 XNT 1X HS 0,4 28,0 T005 44 895 99 T005 44 895 10 XNT F HS45 1,2 T005 44 903 99 T005 44 903 10 Type Oa mm XNT 1 HS b mm b mm c Order-no. mm T005 44 8 99 99 T005 44 8 99 10 Type Oa mm c Order-no. mm Type Order-no. Measuring tip 0,6 31,3 T005 44 861 99 Barrel T005 87 657 58 26,0 T005 44 879 99 Barrel for bent T005 87 657 67 XNT Screw M4 www.labem.pl 169 Soldering Tips NT Soldering Tip Series Soldering Tips for WMP Order-no. Model Description Width A Thickness B Length L NT 1SC NT 1SC Chisel tip slim 0,4 mm 0,15 mm 14 mm NT H NT K NT A NT 6 NT B NT C NT D NT H NT K NT A NT 6 NT B NT C NT D Chisel tip Chisel tip Chisel tip Chisel tip Chisel tip Chisel tip Chisel tip 0,8 mm 1,2 mm 1,6 mm 1,6 mm 2,4 mm 3,2 mm 4,0 mm 0,4 mm 0,4 mm 0,4 mm 0,7 mm 0,8 mm 0,8 mm 0,8 mm 8,4 mm 8,4 mm 9,5 mm 7,4 mm 7,8 mm 8,2 mm 8,6 mm NT AX NT AX Chisel tip bent 1,6 mm 0,4 mm 8,2 mm NT 1S NT 1S Round tip slim O 0,25 mm 8,5 mm NT 1 NT 1 Round tip O 0,50 mm 7,4 mm NT 1X NT 1X Round tip bent 45 O 0,4 mm 8,6 mm NT 4 NT 4 Round tip sloped 45 O 1,2 mm 9,9 mm NT GW NT GW Gullwing tip NT MS NT MS NT Measuring tip for thermoelement O 0,5 mm 2,0 mm 3,0 mm www.labem.pl 170 13,4 mm Soldering Tips Continuation page 170, further soldering tips for WMP Order-no. Description T005 87 517 17 Silicon pad for changing bent NT tips T005 87 517 10 Tip changing tool for changing straight NT tips www.labem.pl 171 Soldering Tips XT Soldering Tip Series Soldering Tips for Soldering irons WP 120 and WXP 120 WXP 120 / WP 120 All-rounder with 120 watts. For soldering applications from small to large components with higher heat demand. 120 W, 24 V Chisel c b Round c a Sloped c Oa mm b mm c Order-no. mm Type Oa mm b mm c Order-no. mm XT H 0,8 0,4 36,5 T005 44 713 99 T005 44 713 10 XT D 4,6 0,8 34,5 T005 44 706 99 T005 44 706 10 XT A 1,6 0,7 36,5 T005 44 703 99 T005 44 703 10 XT CSL 3,2 0,45 36,0 T005 44 742 99 T005 44 742 10 XT AL 1,6 1,0 39,5 T005 44 701 99 T005 44 701 10 XT E 5,9 1,2 34,5 T005 44 707 99 T005 44 707 10 XT ASL 1,6 0,45 36,5 T005 44 740 99 T005 44 740 10 XT DL 4,6 0,8 39,5 T005 44 736 99 XT M 3,2 1,2 39,5 T005 44 702 99 T005 44 702 10 XT MX 3,2 0,8 53,5 T005 44 745 99 T005 44 745 10 XT B 2,4 0,8 36,0 T005 44 704 99 T005 44 704 10 XT HX 0,8 0,4 51,5 T005 44 737 99 XT BSL 2,4 0,45 36,0 T005 44 741 99 T005 44 741 10 XT AX 30 1,6 0,7 51,5 T005 44 743 99 T005 44 743 10 XT B SL 2,5 0,8 36,3 T005 44 738 99 T005 44 738 10 XT BX 30 2,4 0,8 51,5 T005 44 744 99 T005 44 744 10 XT C 3,2 0,8 36,0 T005 44 705 99 T005 44 705 10 Type a a XT Type Oa mm c mm Order-no. Type Oa mm c mm Order-no. XT BS 2,4 36,5 T005 44 715 99 T005 44 715 10 XT DS 5,0 34,5 T005 44 717 99 T005 44 717 10 XT CS 3,2 36,5 T005 44 716 99 T005 44 716 10 Type a mm c mm Order-no. Type a mm c mm Order-no. XT F 30 1,2 36,5 T005 44 718 99 T005 44 718 10 XT CC 45 3,2 36,5 T005 44 710 99 T005 44 710 10 XT AA 60 1,6 36,5 T005 44 708 99 T005 44 708 10 XT DDH 45 45 4,0 40,5 T005 44 730 99 T005 44 730 10 XT BB 45 2,4 36,5 T005 44 709 99 T005 44 709 10 XT AA 60 1,6 36,5 T005 44 708 99 T005 44 708 10 www.labem.pl 172 Interchangeable soldering tips at low prices Maximum heat transfer Heater with improved sensor position Fast reaction time Soldering Tips Gull Wing Type b c a Knife Conical c XT Oa b c mm mm mm Order-no. XT GW1 2,3 3,2 36,5 T005 44 712 99 T005 44 712 10 XT GW2 3,5 4,8 36,5 T005 44 735 99 Type Oa mm c mm Order-no. XT KN 60 2,0 45,0 T005 44 711 99 T005 44 714 10 Type Oa mm c mm Order-no. XT O 1,0 36,5 T005 44 714 99 T005 44 714 10 Type a mm b mm Order-no. XT Soldering head + adapter 10,0 4,0 T005 44 731 99 Soldering head 10,0 4,0 T005 44 731 90 XT Soldering head + adapter 20,0 4,0 T005 44 732 99 Soldering head 20,0 4,0 T005 44 732 90 XT Soldering head + adapter 33,0 4,0 T005 44 733 99 Soldering head 33,0 4,0 T005 44 733 90 Type Oa b c mm mm mm XT GW3 0,8 0,9 Order-no. 41,5 T005 44 711 99 T005 44 711 10 a Soldering head T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces www.labem.pl 173 Soldering Tips XT Soldering Tip Series Soldering Tips for Soldering irons WP 120 and WXP 120 The XT soldering head is an ideal tool for tin coating, soldering and desoldering different components. The additional required barrel must be ordered separately. Accessories Type Measuring tip c Order-no. mm Type 0,5 40,0 T005 44 722 99 Barrel WXP 120 WP 120 T005 87 657 11 T005 87 637 09 Barrel for bent WXP 120 WP 120 T005 87 657 66 T005 87 658 02 a mm XT Adapter M4 36,0 T005 44 719 99 XT Adater M5 36,0 T005 44 720 99 Order-no. T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces www.labem.pl 174 Soldering Tips XTR Soldering Tip Series Soldering tip with twist lock. For use with robot heating element HER 120 and HERX 120. Order-no. Model Description Width A Thickness B Length L T005 44 723 99 XTR A T005 44 723 10 Chisel tip, (1 piece) (10 pieces) 1,6 mm 0,7 mm 36,0 mm T005 44 724 99 XTR B T005 44 724 10 Chisel tip, (1 piece) (10 pieces) 2,4 mm 0,8 mm 35,0 mm T005 44 725 99 XTR C T005 44 725 10 Chisel tip, (1 piece) (10 pieces) 3,2 mm 0,8 mm 35,0 mm T005 44 726 99 XTR D T005 44 726 10 Chisel tip, ( 1 piece) (10 pieces) 4,6 mm 0,8 mm 34,5 mm T005 44 727 99 XTR E T005 44 727 10 Chisel tip, (1 piece) (10 pieces) 5,9 mm 1,2 mm 34,5 mm T005 44 728 99 XTR M T005 44 728 10 Chisel tip, (1 piece) (10 pieces) 3,2 mm 1,2 mm 39,0 mm www.labem.pl 175 Soldering Tips Lotspitzen XHT Soldering Tip Series Soldering Tips for Soldering irons WP 200,WXP 200 WXP 200 / WP 200 High Power soldering iron. Ideal for applications with highest heat demand e.g. LED backpanels or RF shieldings. 200 W, 24 V Chisel c Accessories Oa mm b mm c Order-no. mm Type Oa mm b mm c Order-no. mm XHT C 3,2 1,2 48,0 T005 44 804 99 XHT E 7,6 1,5 48,0 T005 44 802 99 XHT D 5,0 1,2 48,0 T005 44 801 99 XHT F 9,3 2,0 48,0 T005 44 805 99 Type a mm b mm c Order-no. mm Measuring tip 1,25 6,0 55,0 T005 44 803 99 Type a b Barrel XHT T005 87 637 25 www.labem.pl 176 Interchangeable soldering tips at low prices Maximum heat transfer Heater with improved sensor position Fast reaction time Further soldering tip dimensions on request. WSP 80 / WP 80 For universal applications Effective heat transfer Extensive range of soldering tips High quality heater core Soldering tip with low material use and therefore lower cost Approved heating technology with effective heat transfer. For all purpose industrial applications. A wide range of soldering tips are available. Chisel a c b Round c Oa mm b mm Type Oa mm b mm c Order-no. mm LT 1SC 0,4 0,15 15,0 T005 44 494 99 T005 44 494 10 LT DLL 4,6 1,2 12,5 T005 44 448 99 T005 44 448 10 LT 1SCNW* 0,3 0,1 15,0 T005 44 497 99 LT K 1,2 0,4 20,0 T005 44 438 99 T005 44 438 10 T005 44 413 11 LT A 1,6 0,7 12,5 T005 44 440 99 T005 44 440 10 T005 44 403 11 LT L 2,0 1,0 20,0 T005 44 414 99 T005 44 414 10 T005 44 414 11 LT ASL 1,6 0,45 12,5 T005 44 516 99 T005 44 516 11 LT M 3,2 1,2 20,0 T005 44 415 99 T005 44 415 10 T005 44 415 11 LT B 2,4 0,8 LT HX 30 0,8 0,4 17,5 T005 44 420 99 T005 44 420 11 LT BSL 2,4 0,45 12,5 T005 44 517 99 T005 44 517 11 LT ALX 30 1,6 0,7 17,5 T005 44 443 99 T005 44 443 10 LT H 0,8 0,4 12,5 T005 44 437 99 T005 44 437 10 T005 44 412 11 LT BX 30 2,4 0,8 17,5 T005 44 442 99 T005 44 442 10 LT HSL 0,8 0,4 12,5 T005 44 518 99 T005 44 518 11 LT AX 30 1,6 0,8 14,1 T005 44 427 99 T005 44 427 10 LT C 3,2 0,8 12,5 T005 44 407 99 T005 44 407 10 T005 44 407 11 LT 4X 30 1,2 0,4 17,2 T005 44 428 99 T005 44 428 10 LT D 4,6 0,8 12,5 T005 44 409 99 T005 44 409 10 T005 44 409 11 LT MX 30 3,2 1,2 20,0 T005 44 469 99 Type a LT c Order-no. mm 12,5 T005 44 405 99 T005 44 405 10 T005 44 405 11 Type Oa mm c mm Order-no. Type Oa mm c mm Order-no. LT 1S 0,2 15,0 T005 44 436 99 T005 44 402 10 LT 1A 0,5 13,0 T005 44 489 99 T005 44 489 10 T005 44 489 11 LT 1SNW* 0,1 15,0 T005 44 496 99 LT AS 1,6 12,5 T005 44 404 99 T005 44 404 10 T005 44 404 11 LT 1SA 0,5 15,0 T005 44 488 99 LT CS 3,2 12,5 T005 44 411 99 T005 44 411 10 LT 1 0,25 13,0 T005 44 435 99 T005 44 435 10 T005 44 401 11 LT 1SLX 30 0,4 22,0 T005 44 426 99 T005 44 426 10 LT 1LNW* 0,1 25,4 T005 44 498 99 LT 1X 30 0,4 13,0 T005 44 425 99 T005 44 425 10 * none wettable www.labem.pl 177 Soldering Tips LT Soldering Tip Series Soldering Tips for Soldering irons WP 80, WSP 80, MPR 80 and FE 75, TCP-Soldering irons , LR 21, MLR 21 with adapter Soldering Tips Continuation page 177, further soldering tips for WP 80, WSP 80, MPR 80, FE 75 and TCP irons Knife c a Sloped c a Conical a Gull Wing b c a Type Oa mm c mm Order-no. LT KN 2,0 16,5 T005 44 479 99 T005 44 479 10 LT KNSL 45 2,0 16,5 T005 44 519 99 Type a mm c mm Order-no. Type a mm c mm Order-no. LT 4 45 1,2 15,0 T005 44 439 99 T005 44 439 10 T005 44 421 11 LT DD 45 4,0 20,0 T005 44 478 99 T005 44 478 10 LT F 45 1,2 12,5 T005 44 408 99 T005 44 408 10 T005 44 408 11 LT DD 45 4,6 17,0 T005 44 486 99 T005 44 486 10 T005 44 486 11 LT AA 60 1,6 12,5 T005 44 487 99 T005 44 487 10 LT 11CP 45 1,2 15,0 T005 44 421 71 LT BB 60 2,4 17,0 T005 44 444 99 T005 44 444 10 LT 22CP 45 2,0 20,0 T005 44 408 73 LT BB 45 2,4 17,0 T005 44 484 99 LT 33CP 45 3,0 20,0 T005 44 408 77 LT CC 60 3,2 17,0 T005 44 445 99 T005 44 445 10 LT 44CP 45 4,0 20,0 T005 44 408 81 LT CC 45 3,2 17,0 T005 44 485 99 Type Oa mm c mm Order-no. Type Oa mm c mm Order-no. LT 1L 0,2 25,4 T005 44 423 99 T005 44 423 10 T005 44 423 11 LT T 0,6 13,0 T005 44 482 99 T005 44 482 10 T005 44 482 11 LT 1LNW* 0,1 25,4 T005 44 498 99 LT O 0,8 17,0 T005 44 481 99 T005 44 515 10 LT S 0,4 21,0 T005 44 406 99 T005 44 406 10 T005 44 406 11 LT 1LX 35 0,2 25,4 T005 44 424 99 T005 44 424 10 T005 44 424 11 Type Oa mm b mm c Order-no. mm LT GW1 2,3 3,2 17,8 T005 44 410 99 T005 44 410 10 T005 44 410 11 LT GW2 3,5 4,8 17,8 T005 44 511 99 T005 44 511 10 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces * none wettable 178 www.labem.pl High Speed High Speed heat transfer Weller High Speed solder tip High Speed soldering tips provide enhanced heat transfer to the solder area. 12 s 24 s Weller standard tip Heat transfer to the solder area 12 s High Speed Accessories Type LT Oa b c mm mm mm Order-no. 24 s 35C Oa b c mm mm mm Type 200C Order-no. LT 1 HS 0,25 13,0 T005 44 520 99 T005 44 520 10 T005 44 520 11 LT 1SLX HS 30 0,4 LT 1S HS 0,2 15,0 T005 44 521 99 T005 44 521 10 T005 44 52 111 LT AX HS 30 1,6 0,8 14,1 T005 44 532 99 T005 44 532 10 LT AS HS 1,6 12,5 T005 44 522 99 T005 44 522 10 T005 44 522 11 LT 4X HS 30 1,2 0,4 17,2 T005 44 533 99 T005 44 533 10 LT S HS 0,4 21,0 T005 44 523 99 T005 44 523 10 T005 44 523 11 LT O HS 0,8 17,0 T005 44 534 99 T005 44 534 10 LT F HS 45 1,2 12,5 T005 44 524 99 T005 44 524 10 T005 44 524 11 LT T HS 0,6 13,0 T005 44 535 99 T005 44 535 11 LT K HS 1,2 0,4 20,0 T005 44 525 99 T005 44 525 10 T005 44 525 11 LT 1SA HS 0,5 15,0 T005 44 536 99 LT HX HS 30 0,8 0,4 17,5 T005 44 526 99 T005 44 526 10 T005 44 526 11 LT 1A HS 0,5 14,0 T005 44 537 99 T005 44 537 10 T005 44 537 11 LT 4 HS 45 1,2 15,0 T005 44 527 99 T005 44 527 10 T005 44 527 11 LT O HS 1,4 17,0 T005 44 538 99 LT 1L HS 0,2 LT ASL HS 1,6 0,45 12,5 T005 44 539 99 T005 44 539 11 LT 1LX HS 35 0,2 LT HSL HS 0,8 0,4 LT 1X HS 30 0,4 25,4 T005 44 528 99 T005 44 528 10 T005 44 528 11 25,4 T005 44 529 99 T005 44 529 10 T005 44 529 11 13,0 T005 44 530 99 T005 44 530 10 Type a mm c Order-no. mm Measuring tip MLR 80/ WSP 80 0,5 13,0 T005 44 416 99 Screw M4 external thread 8,0 T005 44 449 99 ET-LT Adapter 22,0 T005 44 531 99 T005 44 531 10 12,5 T005 44 540 99 T005 44 540 11 T005 87 207 81 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces * none wettable www.labem.pl 179 Soldering Tips Continuation page 177/178, further soldering tips for WP 80, WSP 80, MPR 80, FE 75 and TCP irons Soldering Tips MT-LT Adapter All TCP, LR 21 soldering irons are delivered with adapter. Order-no. Description T005 44 121 99 T005 87 207 95 MT-LT Adapter for use with LT soldering tip series (see page 87) Barrel for MT-LT Adapter Caution: Not qualified for lead free solder bath or other electronic solder. Soldering tips for high melting solder for WP 80, WSP 80, MPR 80 and FE 75 Order-no. Model Description Width A Thickness B Length L T005 44 430 99 LT H HPB T005 44 430 10 Chisel tip, (1 piece) (10 pieces) 0,8 mm 0,4 mm 13,5 mm T005 44 431 99 LT A HPB T005 44 431 10 Chisel tip, (1 piece) (10 pieces) 1,6 mm 0,7 mm 13,5 mm T005 44 432 99 LT B HPB T005 44 432 10 Chisel tip, (1 piece) (10 pieces) 2,4 mm 0,8 mm 13,5 mm LT D HPB Chisel tip, (1 piece) 4,6 mm 0,8 mm 13,5 mm T005 44 483 99 * for HPB solder = solder with high consumption of lead www.labem.pl 180 Soldering Tips For quick change of hot soldering tips for soldering irons WP 80 / WSP 80. If not in use place soldering iron with barrel in the safety rest Barrel Order-no. Description T005 87 447 10 Barrel for WSP 80 spare part T005 87 448 45 Barrel short (40 mm) for WP 80, spare part, (standard for WP 80) T005 87 448 46 Barrel long (55 mm) for WP 80, spare part For WSP 80, WSP 80IG and WP 80, WP 120, WP 120 IG, WXP 120, barrel and screw M4 has to be ordered separately. SMD Soldering Tip Series Order-no. Model Description Width A Thickness B Length L T005 44 501 99 T005 44 429 99 T005 44 502 99 T005 44 503 99 T005 44 467 89 SMT01 SMT SMT02 SMT03 SMT for PAD-Cleaning for PAD-Cleaning for PAD-Cleaning for PAD-Cleaning for PAD-Cleaning 10,4 mm 10,5 mm 16,8 mm 20,8 mm 35,0 mm 0,6 mm 0,6 mm 0,6 mm 0,6 mm 3,0 mm 7,1 mm 7,5 mm 7,1 mm 7,1 mm 4,0 mm T005 44 504 99 T005 44 505 99 T005 44 506 99 T005 44 507 99 SMT04 SMT05 SMT06 SMT07 for Chip for Chip for Chip for Chip 1,8 mm 1,5 mm 2,5 mm 2,3 mm 3,4 mm 2,3 mm 1,7 mm 4,5 mm 1,8 mm 1,8 mm 1,4 mm 1,8 mm T005 44 508 99 T005 44 509 99 T005 44 510 99 SMT08 SMT09 SMT10 for DIP for DIP for DIP 4,6 mm 10,4 mm 11,5 mm 5,1 mm 5,1 mm 6,9 mm 2,3 mm 2,3 mm 2,3 mm www.labem.pl 181 Soldering Tips SMT Adapter + Tips for LR 21, WP 80, WSP 80, WSP 80FE, WSP 80IG and MPR 80 Order-no. Model Description T005 44 417 99 SMT SMT Adapter for WSP 80 SMTA SMTA SMT Adapter for LR 21 SMT0504A SMT0504A A/1, for components 1,0 x 1,2 mm, 12 x 1,0 mm, 1,2 x 1,2 mm, 1,6 x 0,8 mm SMT1206D SMT1206D D/1, for components 3,2 x 1,6 mm, 3,2 x 2,5 mm SMT8K SMT8K K/2, for components 5,0 x 4,0 mm For use with soldering robot application with heating element HER 80 LT Soldering Tips with twist lock Order-no. Model T005 44 441 99 LTR A T005 44 441 10 Description Width A Thickness B Length L Chisel tip (1 piece) (10 pieces) LTR BChisel tip 1,5 mm wettable (1 piece) T005 44 422 10 (10 pieces) T005 44 422 71 (1 piece) none wettable 1,6 mm 0,8 mm 17,0 mm 2,4 mm 0,8 mm 17,0 mm 2,4 mm 0,8 mm 17,0 mm 3,2 mm 3,2 mm 0,8 mm 0,8 mm 17,0 mm 17,0 mm T005 44 422 99 T005 44 433 99 LTR C T005 44 433 10 Chisel tip (1 piece) (10 pieces) Special tips on request www.labem.pl 182 Soldering Tips LHT Soldering Tip Series Soldering Tips for Soldering irons WSP 150 Order-no. Model Description Width A T005 44 455 99 T005 44 452 99 T005 44 451 99 T005 44 450 99 LHT C LHT D LHT E LHT F Chisel tip Chisel tip Chisel tip Chisel tip 3,2 mm 4,7 mm 6,7 mm 9,3 mm 1,2 mm 1,8 mm 1,8 mm 1,8 mm T005 44 513 99 T005 44 462 99 T005 44 461 99 T005 44 460 99 LHT CX LHT DX LHT EX LHT FX Chisel tip bent Chisel tip bent Chisel tip bent Chisel tip bent 3,2 mm 5,0 mm 7,0 mm 9,2 mm 1,2 mm 2,0 mm 2,0 mm 2,0 mm T005 44 456 99 LHT D 45 Sloped 45 for solar cell production 1,8 mm T005 44 454 99 LHT Screw in tip with outside thread M6 T005 44 453 99 LHT Measuring tip for thermoelement O 0,5 mm T005 87 447 95 Box nut WSP 150 Thickness B www.labem.pl 183 Soldering Tips ET Soldering Tip Series Soldering Tips for Soldering irons LR 21 Order-no. Model Description Width A 4ETS 4ETO ET S ET O Longform Conical Longform Conical O 0,4 mm O 0,8 mm 4ETR ET R Chisel tip slim 1,6 mm 0,7 mm 4ETH 4ETA 4ETB 4ETC 4ETD 4ETE ET H ET A ET B ET C ET D ET E Chisel tip Chisel tip Chisel tip Chisel tip Chisel tip Chisel tip 0,8 mm 1,6 mm 2,4 mm 3,2 mm 4,6 mm 5,6 mm 0,4 mm 0,7 mm 0,8 mm 0,8 mm 0,8 mm 1,2 mm 4ETK 4ETL 4ETM ET K ET L ET M Chisel tip long Chisel tip long Chisel tip long 1,2 mm 2,0 mm 3,2 mm 0,4 mm 1,0 mm 1,2 mm 4ETF 4ETBB 4ETCC ET F ET BB ET CC Round tip sloped 45 Round tip sloped 45 Round tip sloped 45 O 1,2 mm O 2,4 mm O 3,2 mm 4ETP 4ETBS 4ETCS ET P ET BS ET CS Round tip blunt Round tip blunt Round tip blunt O 0,8 mm O 2,4 mm O 3,2 mm T005 41 039 99 T005 41 040 99 ET SMD ET SMD Chip soldering / desoldering tip, component size 2,5 mm x 1,5 mm Chip soldering / desoldering tip, component size 3,8 mm x 1,5 mm T005 41 045 99 ET GW Gullwing tip T005 41 703 99 Screw in tip with M5 outside thread T005 24 750 99 ET Measuring tip for thermoelement O 0,5 mm T005 10 311 99 Barrel Thickness B ET-LT Adapter Soldering tips of the LT series are used with an adapter in the soldering iron LR 21. Order-no. Model T005 87 207 81 T005 87 207 94 Description ET-LT Adaptor with barrel for use with LT series tips with LR 21 and FE 50 soldering irons Spare barrel for ET-LT Adapter www.labem.pl 184 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces Soldering Tips HT Soldering Tip Series Soldering Tips for Soldering irons LR 82 and FE 80 Order-no. Model Description Width A Thickness B T005 44 260 99 T005 44 261 99 T005 44 262 99 HT 1 HT 2 HT 3 Chisel tip Chisel tip Chisel tip 3,2 mm 5,2 mm 7,0 mm 1,0 mm 1,2 mm 1,2 mm T005 44 267 99 T005 44 268 99 T005 44 269 99 HT C HT D HT E Chisel tip long Chisel tip long Chisel tip long 3,2 mm 4,6 mm 5,6 mm 1,0 mm 1,0 mm 1,0 mm T005 44 264 99 T005 44 265 99 T005 44 266 99 HT BS HT CS HT DS Round tip Round tip Round tip O 2,4 mm O 3,2 mm O 5,0 mm T005 44 270 99 HT Screw in tip with outside thread M8nde T005 44 263 99 HT Measuring tip for thermoelement O 0,5 mm T005 26 202 99 Barrel WTA Soldering Tip Series Tweezer Tips for WTA 50 Order-no. Model Description Width A Thickness B T005 44 145 99 T005 44 141 99 T005 44 146 99 T005 44 147 99 T005 44 143 99 T005 44 144 99 WTA 1S WTA 1 WTA 2 WTA 3 WTA 4 WTA 5 Tip set Tip set Tip set Tip set Tip set Tip set 0,5 mm 1,0 mm 3,0 mm 6,0 mm 12,5 mm 18,5 mm 0,5 mm 0,5 mm 0,5 mm 0,5 mm 0,5 mm 0,5 mm T005 44 152 99 T005 44 153 99 WTA 11 WTA 12 Tip set for vertical use Tip set for vertical use 1,0 mm 3,0 mm 0,5 mm 0,5 mm T005 44 149 99 bent 45 bent 45 bent 45 bent 45 bent 45 bent 45 WT Measuring tip for thermoelement O 0,5 mm www.labem.pl 185 Soldering Tips PT Soldering Tip Series Soldering Tips for TCPS, TCP 12, TCP 24 Order-no. Model Description Width A Dicke B 4PTR7 4PTR8 PT R7 PT R8 Chisel tip slim 370C Chisel tip slim 425C 1,6 mm 1,6 mm 0,7 mm 0,7 mm 4PTH6 4PTH7 4PTH8 PT H6 PT H7 PT H8 Chisel tip 310C Chisel tip 370C Chisel tip 425C 0,8 mm 0,8 mm 0,8 mm 0,4 mm 0,4 mm 0,4 mm 4PTA6 4PTA7 4PTA8 PT A6 PT A7 PT A8 Chisel tip 310C Chisel tip 370C Chisel tip 425C 1,6 mm 1,6 mm 1,6 mm 0,7 mm 0,7 mm 0,7 mm 4PTB6 4PTB7 4PTB8 4PTB9 PT B6 PT B7 PT B8 PT B9 Chisel tip 310C Chisel tip 370C Chisel tip 425C Chisel tip 480C 2,4 mm 2,4 mm 2,4 mm 2,4 mm 0,8 mm 0,8 mm 0,8 mm 0,8 mm 4PTC7 4PTC8 4PTC9 PT C7 PT C8 PT C9 Chisel tip 370C Chisel tip 425C Chisel tip 480C 3,2 mm 3,2 mm 3,2 mm 0,8 mm 0,8 mm 0,8 mm 4PTD7 4PTD8 4PTD9 4PTE8 4PTE9 PT D7 PT D8 PT D9 PT E8 PT E9 Chisel tip 370C Chisel tip 425C Chisel tip 480C Chisel tip 425C Chisel tip 480C 4,6 mm 4,6 mm 4,6 mm 5,6 mm 5,6 mm 0,8 mm 0,8 mm 0,8 mm 1,2 mm 1,2 mm 4PTK6 4PTK7 4PTK8 PT K6 PT K7 PT K8 Chisel tip long 310C Chisel tip long 370C Chisel tip long 425C 1,2 mm 1,2 mm 1,2 mm 0,4 mm 0,4 mm 0,4 mm 4PTL6 4PTL7 4PTL8 PT L6 PT L7 PT L8 Chisel tip long 310C Chisel tip long 370C Chisel tip long 425C 2,0 mm 2,0 mm 2,0 mm 1,0 mm 1,0 mm 1,0 mm 4PTM7 4PTM8 4PTM9 PT M7 PT M8 PT M9 Chisel tip long 370C Chisel tip long 425C Chisel tip long 480C 3,2 mm 3,2 mm 3,2 mm 1,2 mm 1,2 mm 1,2 mm Chisel tip bent, 1 side wettable 370C 3,2 mm 1,2 mm T005 41 307 99 PT MX7 4PTCS7 4PTDS7 PT CS7 PT DS7 Round tip 370C Round tip 370C O 3,2 mm O 5,0 mm 4PTS7 4PTS8 PT S7 PT S8 Round tip long 370C Round tip long 425C O 0,4 mm O 0,4 mm 4PTO6 4PTO7 4PTO8 PT O6 PT O7 PT O8 Round tip long 310C Round tip long 370C Round tip long 425C O 0,8 mm O 0,8 mm O 0,8 mm www.labem.pl 186 Soldering Tips Continuation page 186, further soldering tips for TCPS, TCP 12, TCP 24 Order-no. Model Description Width A Thickness B 4PTF7 4PTF8 PT F7 PT F8 Round tip sloped 370C Round tip sloped 425C O 1,2 mm O 1,2 mm 4PTAA7 4PTAA8 4PTAA9 PT AA7 PT AA8 PT AA9 Round tip sloped 370C Round tip sloped 425C Round tip sloped 480C O 1,6 mm O 1,6 mm O 1,6 mm 4PTBB7 4PTBB8 4PTBB9 PT BB7 PT BB8 PT BB9 Round tip sloped 370C Round tip sloped 425C Round tip sloped 480C O 2,4 mm O 2,4 mm O 2,4 mm 4PTCC7 4PTCC8 4PTCC9 PT CC7 PT CC8 PT CC9 Round tip sloped 370C Round tip sloped 425C Round tip sloped 480C O 3,2 mm O 3,2 mm O 3,2 mm 4PTDD7 4PTDD8 4PTDD9 PT DD7 PT DD8 PT DD9 Round tip sloped 370C Round tip sloped 425C Round tip sloped 480C O 5,0 mm O 5,0 mm O 5,0 mm If other soldering tip dimensions are required, please use LT tips with the PT/LT adapter. Soldering tips of LT soldering tip series are used with an adapter in soldering iron TCPS, TCP 12 and TCP 24. All TCP and LR 21 soldering irons are delivered with the adapter. PT-LT Adapter for TCPS, TCP 12,TCP 24 Order-no. Model Description T005 87 207 86 T005 87 207 87 T005 87 207 88 T005 87 207 89 PT6-LT PT7-LT PT8-LT PT9-LT PT6-LT-adapter with barrel 310C PT7-LT-adapter with barrel 370C PT8-LT-adapter with barrel 425C PT9-LT-adapter with barrel 480C T005 87 207 94 Spare barrel for PT/LT adapter www.labem.pl 187 Soldering Tips CT5 Soldering Tip Series Soldering Tips for W 61 Order-no. Model Description Width A 4CT5A6 4CT5A7 4CT5A8 CT5 A6 CT5 A7 CT5 A8 Chisel tip 310C Chisel tip 370C Chisel tip 425C 1,6 mm 1,6 mm 1,6 mm 4CT5B7 4CT5B8 CT5 B7 CT5 B8 Chisel tip 370C Chisel tip 425C 2,4 mm 2,4 mm 4CT5C6 4CT5C7 4CT5C8 CT5 C6 CT5 C7 CT5 C8 Chisel tip 310C Chisel tip 370C Chisel tip 425C 3,2 mm 3,2 mm 3,2 mm 4CT5D7 4CT5D8 CT5 D7 CT5 D8 Chisel tip 370C Chisel tip 425C 4,7 mm 4,7 mm T005 42 107 99 T005 42 108 99 CT5 AX7 CT5 AX8 Chisel tip bent 370C Chisel tip bent 425C 1,6 mm 1,6 mm T005 42 117 99 CT5 BX7 Chisel tip bent 370C 2,4 mm T005 42 128 99 CT5 CX8 Chisel tip bent 425C 3,2 mm T005 42 138 99 CT5 DX8 Chisel tip bent 425C 5,0 mm www.labem.pl 188 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces Soldering Tips CT6 Soldering Tip Series Soldering Tips for W 101 Order-no. Model Description Width A 4CT6C7 4CT6C8 CT6 C7 CT6 C8 Chisel tip 370C Chisel tip 425C 3,2 mm 3,2 mm 4CT6D7 4CT6D8 CT6 D7 CT6 D8 Chisel tip 370C Chisel tip 425C 5,0 mm 5,0 mm 4CT6E7 4CT6E8 CT6 E7 CT6 E8 Chisel tip 370C Chisel tip 425C 7,0 mm 7,0 mm T005 42 307 99 CT6 CX7 Chisel tip bent 370C 3,2 mm T005 42 318 99 CT6 DX8 Chisel tip bent 425C 5,0 mm Welding wedge Order-no. Description T005 11 767 99Welding wedge Teflon-coated,50 x 40 x 4 mm (260C-295C) for W 101SP with twist lock T005 11 767 74 Welding wedge PTFE-coated, 50 x 40 x 4 mm for W 201 (260C - 295C) Adapter For use with LHT tips (page 183) and soldering iron W 101 Order-no. Model Description T005 61 046 67 T005 61 046 68 T005 61 046 69 CT6-7 CT6-8 CT6-9 Adapter for LHT tips, 370 Adapter for LHT tips, 425 Adapter for LHT tips, 480 www.labem.pl 189 Soldering Tips CT2 Soldering Tip Series Soldering Tips for W 201 Order-no. Model Description Width A T005 42 407 99 T005 42 408 99 CT2 E7 CT2 E8 Chisel tip 370C Chisel tip 425C 7,0 mm 7,0 mm T005 42 417 99 T005 42 418 99 CT2 F7 CT2 F8 Chisel tip 370C Chisel tip 425C 10,0 mm 10,0 mm T005 42 428 99 CT2 G8 Chisel tip 425C 11,0 mm T005 42 507 99 T005 42 508 99 CT2 EX7 CT2 EX8 Chisel tip bent 370C Chisel tip bent 425C 7,0 mm 7,0 mm T005 42 517 99 T005 42 518 99 CT2 FX7 CT2 FX8 Chisel tip bent 370C Chisel tip bent 425C 10,0 mm 10,0 mm www.labem.pl 190 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces Soldering Tips SPI Soldering Tip Series Soldering tips for soldering iron SPI 16 Order-no. Model Description Width A 4SPI15 210 4SPI15 213 SPI15 210 SPI15 213 Needle tip Needle tip 0,4 mm 0,8 mm 4SPI15 212 4SPI15 211 SPI15 212 SPI15 211 Chisel tip Chisel tip 1,2 mm 2,0 mm Soldering tips for soldering iron SPI 27 Order-no. Model Description 4SPI26206 4SPI26200 4SPI26201 SPI26 206 SPI26 200 SPI26 201 Chisel tip Chisel tip Chisel tip Width A 1,2 mm 2,0 mm 3,0 mm Soldering tips for soldering iron SPI 41 Order-no. Model Description Width A 4SPI40224 4SPI40225 4SPI40220 SPI40 224 SPI40 225 SPI40 220 Chisel tip Chisel tip Chisel tip 2,0 mm 3,0 mm 5,0 mm 4SPI40226 SPI40 226 Chisel tip bent 2,0 mm Soldering tips for soldering iron SPI 81 Order-no. Model Description Width A 4SPI80234 4SPI80235 4SPI80230 4SPI80231 SPI80 234 SPI80 235 SPI80 230 SPI80 231 Chisel tip Chisel tip Chisel tip Chisel tip 3,0 mm 5,0 mm 7,0 mm 9,5 mm 4SPI80237 4SPI80232 SPI80 237 SPI80 232 Chisel tip bent Chisel tip bent 5,0 mm 7,0 mm www.labem.pl 191 Soldering Tips Soldering Tips for WP 60 Order-no. Model Description Width A T005 16 134 99 T005 16 443 99 60-01-05 60-01-01 Needle tip Needle tip O 0,5 mm O 1,0 mm T005 16 444 99 T005 16 446 99 60-01-02 60-01-04 Chisel tip Chisel tip T005 16 445 99 60-01-03 Round tip sloped 45 O 2,0 mm T005 16 447 99 60-01-52 Hot air nozzle O 4,7 mm T005 16 135 99 60-01-06 Knife 45 T005 16 448 99 60-07U Ejector unit T005 16 450 99 60-02 Protective cap for WP 60 (spare part) 2,4 mm 5,0 mm 5,0 mm Soldering Tips for Pyropen Jr. Order-no. Model Description Width A T005 16 165 99 71-01-01 Needle tip O 1,0 mm T005 16 166 99 T005 16 161 99 71-01-02 71-01-04 Chisel tip Chisel tip T005 16 167 99 71-01-03 Round tip sloped 45 O 2,0 mm T005 16 168 99 T005 16 169 99 71-01-50 71-01-52 Hot air nozzle Hot air nozzle O 1,5 mm O 4,7 mm T005 16 172 99 71-07U Ejector unit 2,0 mm 5,0 mm www.labem.pl 192 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces T005XXXXX11 = 100 Pieces Soldering Tips Soldering Tips for Pyropen and Pyropen Piezo Order-no. Model Description T005 16 120 99 T005 16 124 99 70-01-01 70-01-05 Needle tip Needle tip extra slim O 1,0 mm O 0,5 mm T005 16 129 99 70-01-10 Needle tip bent 30 O 1,0 mm T005 16 121 99 T005 16 132 99 T005 16 130 99 70-01-02 70-01-13 70-01-11 Chisel tip Chisel tip Chisel tip T005 16 122 99 T005 16 123 99 T005 16 125 99 T005 16 127 99 70-01-03 70-01-04 70-01-06 70-01-08 Round tip sloped Round tip sloped Round tip sloped, conical Round tip sloped 35 O 2,0 mm O 3,0 mm O 2,0 mm O 2,0 mm T005 16 140 99 T005 16 141 99 T005 16 142 99 T005 16 143 99 70-01-50 70-01-51 70-01-52 70-01-53 Hot air nozzle Hot air nozzle Hot air nozzle Hot air nozzle O 1,7 mm O 3,3 mm O 4,9 mm O 7,0 mm T005 16 151 99 T005 16 150 99 70-07TU 70-07SU Ejector unit, not for Piezo Solder ejector, not for Piezo T005 16 159 99 70-01-55 T005 16 158 99 70-01-54 Reflector for heat shrinking Reflector for heat shrinking Diameter O Width A 3,0 mm 5,0 mm 7,7 mm O 6,0 mm 18,0 mm O 8,0 mm 22,0 mm www.labem.pl 193 Desoldering Nozzles DX Desoldering Nozzle series The DX series tools feature a novel threadless desoldering nozzle fixture system whereby the nozzle is inserted into the head and locked into place by applying a 1/4 turn. This patented feature allows the desoldering nozzles to be quickly and easily exchanged and also improves the rate of thermal transfer from the desoldering head to the desoldering nozzle providing the tools with a faster heat up time and recovery rate. Additionally, because there are no threads in the head to block, maintenance and costs are reduced. Desoldering nozzles with threadless fixture system for DSX 80 and DXV 80 Order-no. Model Description Outer O Inner O Nozzle Length T005 13 140 00 DX 110 T005 13 140 10 Nozzle (1 piece) (10 pieces) 1,9 mm 0,7 mm 25 mm T005 13 141 00 DX 111 T005 13 141 10 Nozzle (1 piece) (10 pieces) 2,5 mm 0,7 mm 25 mm T005 13 142 00 DX 112 T005 13 142 10 Nozzle (1 piece) (10 pieces) 2,3 mm 1,0 mm 25 mm T005 13 143 00 DX 113 T005 13 143 10 Nozzle (1 piece) (10 pieces) 2,5 mm 1,2 mm 25 mm Nozzle (1 piece) with improved thermal transfer (10 pieces) 2,5 mm 1,2 mm 25 mm T005 13 144 00 DX 114 T005 13 144 10 Nozzle (1 piece) (10 pieces) 3,3 mm 1,8 mm 25 mm T005 13 145 00 DX 115 T005 13 145 10 Nozzle (1 piece) (10 pieces) 1,9 mm 0,7 mm 29 mm T005 13 146 00 DX 116 T005 13 146 10 Nozzle (1 piece) (10 pieces) 2,7 mm 1,2 mm 29 mm T005 13 147 00 DX 117 T005 13 147 10 Nozzle (1 piece) (10 pieces) 2,9 mm 1,5 mm 25 mm T005 13 148 00 DX 118 T005 13 148 10 Nozzle (1 piece) (10 pieces) 1,5 mm 0,7 mm 23 mm T005 13 151 00 DX 119 T005 13 151 10 Needle tiplet (1 piece) with unwettable stainless steel tube for removal of solder bridges in connection with hot air pencil (10 pieces) 1,1 mm 0,7 mm 33 mm T005 13 152 00 DX 120 T005 13 152 10 Nozzle (1 piece) without inside tube for cleaning SMD pads. (10 pieces) 2,5 mm 1,1 mm 22 mm T005 13 153 99 Measuring nozzle 3,3 mm 0,55 mm 21,5 mm T005 87 067 94 Conus insert cleaning tool T005 13 790 99 Nozzle -Set DX 110 - DX 115 T005 13 150 00 DX 113HM T005 13 150 10 www.labem.pl 194 Desoldering Nozzles DS Desoldering nozzles Desoldering nozzles with thread for DS 22, DS 80 and DSV 80 Order-no. Model Description T005 13 510 99* DS 110 T005 13 532 99* DS 110HM Outer O Inner O Nozzle Length Nozzle 1,9 mm 0,7 mm 18 mm Nozzle with improved heat transfer 1,9 mm 0,7 mm 18 mm T005 13 511 99* DS 111 Nozzle 2,5 mm 0,7 mm 18 mm T005 13 512 99* DS 112 Nozzle 2,3 mm 1,0 mm 18 mm Nozzle with improved heat transfer 1,9 mm 0,9 mm 18 mm Nozzle 2,5 mm 1,2 mm 18 mm Nozzle with improved heat transfer 2,5 mm 1,2 mm 18 mm T005 13 533 99* DS 112HM T005 13 513 99* DS 113 T005 13 530 99* DS 113HM T005 13 514 99* DS 114 Nozzle 3,3 mm 1,8 mm 18 mm T005 13 515 99* DS 115 Nozzle 1,9 mm 0,7 mm 24,5 mm T005 13 516 99* DS 116 Nozzle 2,7 mm 1,2 mm 24,5 mm T005 13 550 99* DS 117 Nozzle 2,9 mm 1,5 mm 18 mm T005 13 551 99* DS 118 Nozzle 1,5 mm 0,7 mm 18 mm T005 13 527 99* DS 119 Needle tiplet with unwettable 1,9 mm stainless steel tube for removal of solder bridges in connection with hot air pencil 0,7 mm 26 mm T005 13 552 99* DS 120 Nozzle without inside tube, for cleaning SMD pads 2,5 mm 1,1 mm 15,5 mm T005 24 749 99* Measuring nozzle 3,3 mm 0,55 mm 18 mm T005 13 770 99* Nozzle-Set DS 110 - DS 115 *Discontinuation www.labem.pl 195 Desoldering Nozzles Cleaning set for DS + DX nozzles Order-no. T005 13 500 99 Description Cleaning set complete for cleaning desoldering nozzles and for nozzle exchange consists of: T005 87 488 61 T005 13 501 99 Handle Replacement needle set 0,6 mm / 0,9 mm / 1,4 mm / 1,9 mm consists of: T005 13 502 99 T005 13 503 99 Replacement needle set je 1 x 1,9 mm,3 x 0,9 mm Replacement needle set ,je 1 x 1,9 mm,3 x 0,5 mm Cone Cleaner T005 87 067 94 Cone insert - Cleaning tool ESD Order-no. Description T005 87 658 01 PDN Pliers for changing nozzles * * * * * * * * For DX, XDS and XDSL nozzles Simple, safe and fast change of Weller desoldering nozzles. Especially designed grip for changing the nozzle without damaging the soldering tool. Ergonomic design for easy handling. ESD safe soft grip. For all ESD work places. Save and easy embracement for professional desoldering nozzle change. fachgerechten Wechsel der Entlotduse Highest Weller product quality for long lifetime. Made in Germany. Fast cleaning process saves maintenance costs. www.labem.pl 196 Order-no. Model Description Inner O Outer O Nozzle Length T005 13 250 99 T005 13 250 10 XDS 1 Nozzle (1 piece) (10 pieces) 1,4 mm 2,5 mm 10,5 mm T005 13 251 99 T005 13 251 10 XDS 2 Nozzle (1 piece) (10 pieces) 3,0 mm 5,3 mm 10,5 mm T005 13 252 99 T005 13 252 10 XDS 3 Nozzle (1 piece) (10 pieces) 1,0 mm 2,3 mm 10,5 mm T005 13 253 99 T005 13 253 10 XDS 4 Nozzle (1 piece) (10 pieces) 1,2 mm 2,5 mm 10,5 mm T005 13 254 99 T005 13 254 10 XDS 5 Nozzle (1 piece) (10 pieces) 1,8 mm 3,3 mm 10,5 mm T005 13 255 99 T005 13 255 10 XDS 6 Nozzle (1 piece) (10 pieces) 0,7 mm 1,9 mm 16,5 mm T005 13 256 99 T005 13 256 10 XDS 7 Nozzle (1 piece) (10 pieces) 1,2 mm 2,7 mm 16,5 mm T005 13 257 99 T005 13 257 10 XDS 8 Nozzle (1 piece) (10 pieces) 1,5 mm 2,9 mm 10,5 mm T005 13 258 99 XDS 9 Measuring tip (1 piece) T005 13 259 99 XDSL 1 T005 13 259 10 Nozzle (1 Stuck) (10 Stuck) 1,4 mm 2,5 mm 10,5 mm T005 13 260 99 XDSL 2 T005 13 260 10 Nozzle (1 piece) (10 piece) 3,0 mm 5,3 mm 10,5 mm T005 13 261 99 XDSL 3 T005 13 261 10 Nozzle (1 Stuck) (10 Stuck) 1,0 mm 2,3 mm 10,5 mm T005 13 262 99 XDSL 4 T005 13 262 10 Nozzle (1 piece) (10 Stuck) 1,2 mm 2,5 mm 10,5 mm T005 13 263 99 XDSL 5 T005 13 263 10 Nozzle (1 piece) (10 Stuck) 1,8 mm 3,3 mm 10,5 mm T005 13 264 99 XDSL 6 T005 13 264 10 Nozzle (1 piece) (10 piece) 0,7 mm 1,9 mm 16,5 mm T005 13 265 99 XDSL 7 T005 13 265 10 Nozzle (1 Stuck) (10 piece) 1,2 mm 2,7 mm 16,5 mm T005 13 266 99 XDSL 8 T005 13 266 10 Nozzle (1 piece) (10 piece) 1,5mm 2,9 mm 10,5 mm Maintenance tool for XDS Nozzles Order-no. Description T005 87 657 73 Cleaning Set complete T005 87 657 72 Cone Cleaner Desoldering Nozzles XDS Desoldering nozzle series Desoldering nozzles for DSX 120, WXDP 120, WXDV 120 T005XXXXX99 = 1 Piece T005XXXXX10 = 10 Pieces www.labem.pl 197 Hot Air Nozzles Hot air nozzles for HAP 1, HAP 200 and WXHAP 200 Order-no. Model T005 87 617 28 Description Width A Thickness B Adapter M6 for HAP 200 T005 87 277 74 F02 Flat nozzle 8,0 mm 1,5 mm T005 87 277 73 F04 Flat nozzle 10,5 mm 1,5 mm T005 87 277 72 F06 Flat nozzle 12,0 mm 1,5 mm Hot air nozzles for HAP 1, HAP 200 and WXHAP 200 Order-no. Model Description Diameter D Distance C Length C T005 87 278 23 R02 Round nozzle O 0,8 mm T005 87 278 21 R04 Round nozzle O 1,2 mm T005 87 278 22 R06 Round nozzle O 3,0 mm T005 87 277 87 R10 Round nozzle long O 2,0 mm 50 mm T005 87 277 86 R08 Round nozzle long bent O 2,0 mm 50 mm T005 87 277 76 FD2 Dual nozzle O 1,5 mm 8 mm T005 87 277 75 FD4 Dual nozzle O 1,5 mm 10 mm www.labem.pl 198 Hot Air Nozzles Hot air nozzles for HAP 1, HAP 200 and WXHAP 200 2 sides heated (Type D, Length X =heated side) Order-no. Model Description Length X Width Y T005 87 277 79 D04 Hot air nozzle, 2 sides heated with pre-heating plate 10,5 mm 10,5 mm T005 87 277 82 D06 Hot air nozzle, 2 sides heated with pre-heating plate 13,0 mm 10,0 mm T005 87 277 81 D08 Hot air nozzle, 2 sides heated with pre-heating plate 15,0 mm 10,0 mm T005 87 277 84 D10 Hot air nozzle, 2 sides heated with pre-heating plate 18,0 mm 10,0 mm Hot air nozzles for HAP 1, HAP 200 and WXHAP 200 4 sides heated (Type Q) Order-no. Model Description Length X Width Y T005 87 277 77 Q02 Hot air nozzle, 4 sides heated 6,0 mm 6,5 mm Q04 Hot air nozzle, 4 sides heated 6,0 mm 9,0 mm T005 87 277 80 Q06 Hot air nozzle, 4 sides heated with pre-heating plate 15,0 mm 10,0 mm T005 87 277 83 Q08 Hot air nozzle, 4 sides heated with pre-heating plate 12,5 mm 15,0 mm T005 87 278 12 SK709 Hot air nozzle, 4 sides heated with pre-heating plate 12,0 mm 12,0 mm T005 87 277 85 Q10 Hot air nozzle, 4 sides heated with pre-heating plate 18,0 mm 18,0 mm T005 87 277 78 T005 87 278 08 R01 Measuring nozzle for calibration www.labem.pl 199 Hot Air Nozzles "c lic k" The ND and NQ nozzles have an integrated pre-heating plate for pre-heating components by means of contact heat. Air outlet slots are located around the plate with a width of approx. 1 mm for the hot air. 005 87 578 93 005 87 578 99 005 87 578 94 005 87 578 92 Hot air nozzles for HAP 3000 (WHA 3000P / V), HAP 2 (WHA 2000) and HAP 3 (WHA 700, WHA 300) Order-no. Model Description T005 87 368 81 NR04 Round nozzle, without vacuum O 2,5 mm T005 87 368 67 NR05 Round nozzle, without vacuum O 4,0 mm T005 87 368 70 NR10 Round nozzle, without vacuum O 7,0 mm T005 87 507 70 NRV07 Hot air nozzle with vacuum for small components O 7,0 mm T005 87 507 72 NRV10 Hot air nozzle with vacuum for small components O 10,0 mm T005 87 507 74 NRV12 Hot air nozzle with vacuum for small components O 12 mm T005 87 368 82 NR02 Round nozzle, bent without vacuum O 1,7 mm x 45 T005 87 507 65 NR06 Round nozzle, bent without vacuum O 6,0 mm x 45 T005 87 368 83 DR05 Diameter O Dual nozzle round, without vacuum www.labem.pl 200 2 x O 2,5 mm Hot Air Nozzles 2 sides heated (Type ND, Width X = heated side) Order-no. Model Description Length X Width Y T005 87 368 43 ND05 Hot air nozzle, 2 sides heated 10,7 mm 10,7 mm T005 87 368 42 ND 10 Hot air nozzle, 2 sides heated 14,0 mm 10,0 mm T005 87 368 41 ND 15 Hot air nozzle, 2 sides heated 19,0 mm 12,0 mm T005 87 368 40 ND 20 Hot air nozzle, 2 sides heated 21,5 mm 14,8 mm T005 87 369 32 ND SK535/A Hot air nozzle, without edge for thin components 8,5 mm 20,0 mm T005 87 369 33 ND SK535/B Hot air nozzle, without edge for thin components 10,5 mm 20,0 mm T005 87 507 34 ND SK699 Hot air nozzle, without edge for thin components 12,5 mm 20,0 mm T005 87 369 34 ND SK535/C Hot air nozzle, without edge for thin components 14,0 mm 20,0 mm www.labem.pl 201 Hot Air Nozzles Four sides heated (Type NQ) Order-no. Model Description Length X Width Y T005 87 368 39 NQ05 Hot air nozzle, 4 sides heated 10,7 mm 10,7 mm T005 87 368 38 NQ15 Hot air nozzle, 4 sides heated 14,5 mm 10,0 mm T005 87 368 18 NQ10 Hot air nozzle, 4 sides heated 14,8 mm 14,8 mm T005 87 368 37 NQ20 Hot air nozzle, 4 sides heated 15,5 mm 13,0 mm T005 87 368 14 NQ25 Hot air nozzle, 4 sides heated 18,0 mm 18,0 mm T005 87 507 21 NQ30 Hot air nozzle, 4 sides heated 17,5 mm 23,5 mm T005 87 368 07 NQ35 Hot air nozzle, 4 sides heated 20,5 mm 20,5 mm T005 87 368 80 NQ Hot air nozzle, 4 sides heated 24,0 mm 12,0 mm T005 87 368 04 NQ40 Hot air nozzle, 4 sides heated 26,0 mm 26,0 mm T005 87 368 33 NQ45 Hot air nozzle, 4 sides heated 31,3 mm 31,3 mm T005 87 368 91 NQ50 Hot air nozzle, 4 sides heated 36,0 mm 36,0 mm T005 87 368 90 NQ55 Hot air nozzle, 4 sides heated 43,0 mm 43,0 mm www.labem.pl 202 Hot Air Nozzles 4 sides heated (Type NQ) continuation Order-no. Model Description Length X Width Y T005 87 507 41 NQT 10 Hot air nozzle, 4 sides heated, 14,8 mm 14,8 mm without protruding edge for thin components T005 87 507 42 NQT25 Hot air nozzle, 4 sides heated, 18,0 mm 18,0 mm without protruding edge for thin components T005 87 507 39 NQT Hot air nozzle, 4 sides heated, 22,0 mm 22,0 mm without protruding edge for thin components T005 87 368 75 NA 20 Measuring nozzle for calibration Special tips on request Pre heating nozzle for HAP 3 Order-no. Description T005 87 578 92 Pre heating nozzle for HAP 3 Multi rest Order-no. Description T005 15 048 99 Multi rest for nozzle NR, ND NQ Rubber insert for CSF heads (spare) Order-no. Description T005 87 137 99 T005 87 137 98 O 4,5 mm, 10 pieces O 10,0 mm, 10 pieces www.labem.pl 203 Hot Air Nozzles The patented hot air nozzles of the WQB rework systems, coupled with digital control of the hot air temperature and its flow rate provide an even convective heating of the component. This in turn ensures reatability of the reflow process. Hot air nozzle for WQB 4000SOPS Order-no. T005 87 479 47 T005 87 479 43 T005 87 479 45 T005 87 479 61 T005 87 549 67 T005 87 478 48 T005 87 479 04 T005 87 479 35 T005 87 478 93 T005 87 548 36 T005 87 479 77 T005 87 478 33 T005 87 547 70 T005 87 548 20 T005 87 477 64 T005 87 479 93 T005 87 478 50 T005 87 479 27 T005 87 479 99 T005 87 479 06 T005 87 548 87 T005 87 477 53 T005 87 478 71 T005 87 478 74 T005 87 549 03 T005 87 477 63 T005 87 479 16 T005 87 479 41 T005 87 479 85 Nozzle housing inside 7,6 x 6,5 x 8,5 x 8,5 x 10,0 x 12,0 x 13,5 x 15,5 x 15,0 x 18,5 x 15,5 x 18,0 x 21,0 x 22,0 x 25,0 x 27,0 x 27,0 x 29,0 x 28,0 x 33,0 x 35,0 x 37,0 x 39,5 x 42,0 x 45,0 x 46,0 x 47,0 x 49,0 x 57,0 x 7,99 mm 6,5 mm 8,5 mm 10,6 mm 10,0 mm 12,0 mm 13,5 mm 15,5 mm 11,0 mm 10,0 mm 23,5 mm 18,0 mm 21,0 mm 22,0 mm 25,0 mm 23,0 mm 27,0 mm 29,0 mm 32,0 mm 33,0 mm 35,0 mm 37,0 mm 39,5 mm 42,0 mm 11,0 mm 46,0 mm 47,0 mm 49,0 mm 18,5 mm Nozzle housing outside 8,6 x 8,9 mm 7,5 x 7,5 mm 9,5 x 9,5 mm 9,5 x 11,6 mm 11,0 x 11,0 mm 13,0 x 13,0 mm 14,3 x 14,3 mm 16,5 x 16,5 mm 16,0 x 12,0 mm 19,5 x 11,0 mm 16,5 x 24,5 mm 20,0 x 20,0 mm 23,0 x 23,0 mm 24,0 x 24,0 mm 27,0 x 27,0 mm 29,0 x 25,0 mm 29,0 x 29,0 mm 31,0 x 31,0 mm 30,0 x 34,0 mm 35,0 x 35,0 mm 37,0 x 37,0 mm 39,0 x 39,0 mm 41,5 x 41,5 mm 44,0 x 44,0 mm 47,0 x 13,0 mm 48,0 x 48,0 mm 49,0 x 49,0 mm 51,0 x 51,0 mm 59,0 x 20,0 mm Special sizes on request www.labem.pl 204 Hot Air Nozzles www.labem.pl 205 Electric Screwdriver "Power is nothing without control..." Flexible solutions Wide accessory program - analog or digital power units, torque tester, tool connection cables as well as a large bit portfolio www.labem.pl 206 Electric Screwdriver Operational safety and environment pollution Noise level as of standard conversations (below emission level in hospitals during day duty) Ergonomic unit Light and compact ESD safe No emission No harmful carbon dust due to brushless motor ESD Low running costs Brushless, maintenance free motor Compatible units Analog and digital power units, clutch systems or electronic screwdrivers - all tools are compatible and for different applications www.labem.pl 207 Electric Srewdriver WTS A WTS D Digital Power Unit Digital Power Unit Photo similar Photo similar Photo similar Photo similar Photo similar WBTS12L WBTS35L WTBS35ECL WBTS12P WBTS35P Accessories WAH12 WCAB5M WAH35 WCAB5MS WBAL W TT5 www.labem.pl 208 Electric Screwdriver Technical data WTS A WTS D Mains supply voltage 100 - 240 VAC Speed control from 60% to 100% of nominal speed Display Operation panel no Simply rotary dial adjustment Torque range display Order-No. LED Text display no yes T005 39 016 99 T005 39 006 99 Photo similar Photo similar Photo similar Photo similar Photo similar WBTS12L WBTS35L WBTS35ECL WBTS12P WBTS35P Rotational speed 650 UpM 800 UpM 800 UpM 650 UpM 800 UpM Start Lever start Lever start Lever start Push to start Push to start 0,05 - 1,2Nm 0,5 - 3,5 Nm 0,5 - 3,5 Nm 0,05 - 1,2Nm 0,5 - 3,5Nm For use with 1/4" bits 1/4" 1/4" 1/4" 1/4" 1/4" Brushless, maitenance free motor yes yes yes yes yes Right and left rotation yes yes yes yes yes <55dBA <55dBA <55dBA <55dBA <55dBA Torque range Low noise www.labem.pl 209 Electric screwdriver WTS A S imply rotary dial adjustment Soft start capability - ramp from 0 to 2 sec. ESD compliant housing Order-No. Model Description T005 39 016 99 WTS A Analogue Power Unit Order-No. Model Description T005 39 006 99 WTS D Digital Power Unit, recommended ECL Electric Screwdriver WTS D E asy operation with text display and simple programming, multiple languages Soft start capability - ramp from 0 to 2 sec. Suitable for complex tightening applications ESD compliant housing www.labem.pl 210 Electric Screwdriver WBTS12L Electric Screwdriver Lever start Torque setting via clutch spring compression Photo similar Order-No. Model Description T005 39 091 99 WBTS12L Electric Screwdriver with lever start and 8-pin interface cable, connecting cable 2,5 m WBTS35L Electric Screwdriver Lever start Torque setting via clutch spring compression Photo similar Order-No. Model Description T005 39 093 99 WBTS35L E lectric Screwdriver with lever start and 8-pin interface cable, connecting cable 2,5 m WBTS35ECL Electric Screwdriver L ever start Torque setting via digital controller Photo similar Order-No. Model Description T005 39 095 99 WBTS35ECL Electric Screwdriver with lever start and 8-pin interface cable, connecting cable 2,5 m WBTS12P Electric Screwdriver P ush to start Torque setting via clutch spring compression Photo similar Order-No. Model Description T005 39 092 99 WBTS12P Electric Screwdriver push to start and 8-pin interface cable, connecting cable 2,5 m WBTS35P Electric Screwdriver Push to start Torque setting via clutch spring compression Photo similar Order-No. Model Description T005 39 094 99 WBTS35P Electric Screwdriver push to start and 8-pin interface cable, connecting cable 2,5 m www.labem.pl 211 Accessories WAH12 Angle head Especially for tight work spaces Order-No. Model Description T005 87 677 01 WAH12 90 Angle head for WBTS12L Order-No. Model Description T005 87 677 02 WAH35 90 Angle head for WBTS35L Order-No. Model Description T005 87 677 03 WBAL Balancer WAH35 Angle head Especially for tight work spaces WBAL Balancer Working load limit from 0,4 to 1,0 kg www.labem.pl 212 Electric Screwdriver WCAB5M Connecting cable Flexible connecting cable Order-No. Model Description T005 87 677 04 WCAB5M Connecting cable 5 m, 8-pin Order-No. Model Description T005 87 677 05 WCAB5MS Connecting cable with twist 5 m, 8-pin Order-No. Model Description T005 87 677 06 WTT5 Torque tester from 0,2 until 5 Nm WCAB5MS Connecting cable F lexible connecting cable with twist WTT5 Torque tester Tester for screwdriver calibration 3 units of torque measurements Automatic shut down 2 Display mode selectable Battery powered or power supply www.labem.pl 213 Suitable Bits and Drive Phillips(R)-Bits A /4" Hex Insert Bits 1 Limited Clearance Order-No. Point Size B Overall Length Inch mm Turned Length (A) Inch mm Turned OD (B) Inch mm 446-0X 0 1 25 7/16 11 0,108 4,06 446-1X 1 1 25 7/16 11 0,108 4,06 446-2X 2 1 25 7/16 11 0,108 4,06 Pozidriv(R) Bits A 1/4" Hex Insert Bits B Order-No. Point Size Overall Length Inch mm Turned Length (A) Inch mm Turned OD (B) Inch mm 440-1-PZDX 1 1 25 440-2-PZDX 2 1 25 440-215-PZDX 2 11/2 38 440-22-PZDX 2 2 51 440-3-PZDX 3 1 25 440-4-PZDX 4 11/4 32 446-1-PZDX * 1 1 25 7/16 11 0,18 4,6 446-2-PZDX * 2 1 25 7/16 11 0,18 4,6 www.labem.pl 214 Electric Screwdriver Slotted Bits /4" Hex Insert Bits 1 Limited Clearance Order-No. Screw Size Length Inch mm Blade Thickness Inch mm Blade Width Inch mm 445-000X 1F-2R 1 25 ,021 ,53 ,125 3,2 445-00X 2F-3R 1 25 ,025 ,64 ,140 3,6 445-0X 3F-4R 1 25 ,030 ,76 ,154 3,9 445-10X 4F-5R 1 25 ,034 ,86 ,185 4,7 445-20X 5F-6R 1 25 ,036 ,91 ,216 5,5 445-30X 6F-7R 1 25 ,038 ,97 ,248 6,3 Torx(R) Bits 1/4" Hex Insert Bits Order-No. Point Size Overall Length Inch mm 440-TX-05X T-5 1 25 440-TX-06X T-6 1 25 440-TX-07X T-7 1 25 440-TX-08X T-8 1 25 440-TX-09X T-9 1 25 440-TX-10X T-10 1 25 440-TX-15X T-15 1 25 440-TX-20X T-20 1 25 440-TX-25X T-25 1 25 440-TX-27X T-27 1 25 440-TX-30X T-30 1 25 440-TX-40X T-40 1 25 www.labem.pl 215 Suitable Bits and Drive Socket Head Bits 1/4" Hex Insert Bits - Metric Order-No. Point Size Overall Length Inch mm 185-1.5MM 1,5 mm 1 25 185-2MM 2,0 mm 1 25 185-2.5MM 2,5 mm 1 25 185-3MM 3,0 mm 1 25 185-4MM 4,0 mm 1 5/16 33 185-5MM 5,0 mm 1 5/16 33 185-6MM 6,0 mm 1 5/16 33 185-7MM 7,0 mm 1 1/4 32 185-8MM 8,0 mm 1 1/4 32 185-9MM 9,0 mm 1 1/4 32 185-10MM 10,0 mm 1 1/4 32 Bit Holder Hex Drive for 1/4" Hex Inserts Order-No. Size Overall Length mm M-490-2 2 51 Magnetic M-490-NR 2 31/32 75 Magnetic; No lock ring M-490 2 31/32 75 Magnetic M-497 3 3/32 Magnetic; 3/8" (9,5 mm) reduced dia. www.labem.pl 216 Electric Screwdriver Slotted Drive 1/4" Hex Power Drive Order-No. Screw Size Length Inch mm Blade Thickness Inch mm Blade Width / Body O Inch mm 320-000X 1F-2R 1 15/16 49 ,022 ,56 ,122 3,10 326-000X 1F-2R 2 3/4 70 ,022 ,56 ,122 3,10 320-00X 2F-3R 1 15/16 49 ,026 ,66 ,134 3,40 326-00X 2F-3R 2 3/4 70 ,026 ,66 ,134 3,40 320-0X 3F-4R 1 15/16 49 ,030 ,76 ,151 3,84 326-0X 3F-4R 2 3/4 70 ,030 ,76 ,151 3,84 320-1X 4F 6R 1 15/16 49 ,034 ,86 ,187 4,75 326-1X 4F-5R 2 3/4 70 ,034 ,86 ,187 4,75 320-20X 5F-6R 1 15/16 49 ,036 ,91 ,215 5,46 326-20X 5F-6R 2 3/4 70 ,036 ,91 ,215 5,46 320-2X 5F-6R 1 15/16 49 ,036 ,91 ,250 6,35 326-2X 5F-6R 2 3/4 70 ,036 ,91 ,250 6,35 www.labem.pl 217 Suitable Bits and Drive Socket Head Drive 1/4" Hex Power Drive - Metric Order-No. Point Size Overall Length Inch mm AM-1.5MM 1,5 mm 1 15/16 49 AM-2MM 2,0 mm 1 15/16 49 AM-2.5MM 2,5 mm 1 15/16 49 AM-3MM 3,0 mm 1 15/16 49 AM-3MM-3 3,0 mm 3 76 AM-3MM-4 3,0 mm 4 102 AM-4MM 4,0 mm 1 15/16 49 AM-5MM 5,0 mm 1 15/16 49 AM-5MM-4 5,0 mm 4 AM-6MM 6,0 mm 1 15/16 AM-6MM-4 6,0 mm 4 AM-7MM 7,0 mm 1 15/16 49 AM-8MM 8,0 mm 1 15/16 49 AM-10MM 10,0 mm 1 15/16 49 102 49 102 Pozidriv(R)-Drive 1/4" Hex Power Drive Order-No. Size Overall Length Inch mm Body O Inch mm Turned Length Inch mm 491-PZDX 1 1 15/10 49 3/10 4,6 1 1/4 32 491-A-PZDX 1 2 3/4 70 3/16 48 2 51 492-PZDX 2 1 15/16 49 1/4 6,4 1 1/4 32 492-A-PZDX 2 2 3/4 70 1/4 6,4 2 51 493-PZDX 3 1 15/16 49 5/16 7,9 1 25 493-A-PZDX 3 2 3/4 70 5/16 7,9 1 3/4 44 www.labem.pl 218 Electric Screwdriver Torx(R) Drive 1/4" Hex Power Drive Order-No. Driver Size Body O mm Overall Length Inch mm 49-TX-05 T5 3,0 1 15/16 49 49-A-TX-05 T-5 3,0 2 3/4 70 49-TX-06 T-6 3,0 1 15/16 49 49-A-TX-06 T-6 3,0 2 3/4 70 49-TX-07 T-7 3,0 1 15/16 49 49-A-TX-07 T-7 3,0 2 3/4 70 49-A-TX-08 T-8 3,0 2 3/4 70 49-TX-09 T-9 3,0 1 15/16 49 49-A-TX-09 T-9 3,0 2 3/4 70 49-TX-10 T-10 3,8 1 15/16 49 49-A-TX-10 T-10 3,8 2 3/4 70 49-TX-15 T-15 3,8 1 15/16 49 49-A-TX-15 T-15 3,8 2 3/4 70 49-TX-20 T-20 4,3 1 15/16 49 49-A-TX-20 T-20 4,3 2 3/4 70 49-TX-25 T 25 4,0 1 15/16 49 49-B-TX-25 T-25 4,9 3 1/2 89 49-TX-27 T-27 5,5 1 15/16 49 49-B-TX-27 T 27 5,5 3 1/2 89 49-TX-30 T-30 6,0 1 15/16 49 49-B-TX-30 T-30 6,0 3 1/2 89 49-TX-40 T 40 7,8 1 15/16 49 49-B-TX-40 T-40 7,8 3 1/2 89 www.labem.pl 219 Suitable Bits and Drive Phillips(R) Drive 1/4" Hex Power Drive Order-No. Point Size Overall Length Inch mm Body O Inch mm Turned Length Inch mm 4910X 0 1 15/16 49 1/8 3,2 1 1/4 32 4910-AX 0 2 3/4 70 1/8 3,2 2 51 491X 1 1 15/16 49 3/16 4,8 1 1/4 32 491-AX 1 2 3/4 70 3/16 4,8 2 51 492X 2 1 15/16 49 1/4 6,4 1 1/4 32 492-AX 2 2 3/4 70 1/4 6,4 2 51 493X 3 1 15/16 49 5/16 7,9 1 25 493-AX 3 2 3/4 70 5/16 7,9 1 3/4 44 www.labem.pl 220 www.labem.pl 221 Electric Screwdriver Dispensers, Syringes Adapters, Needles Less is more ... www.labem.pl 222 Dispensers Easy handling reduced sources of errors due to manual control dispensing time via potentiometer protection against pollution vacuum technology for drop stop Easy equipment selection the adequate dispenser for every application 2 versions of dispenser, 1 or 2 channel tremendous economy of consumables quick overview and selection of accessories www.labem.pl 223 Dispensers KDS824A S hot time duration adjustable from 0,01 to 99,99 seconds Vacuum feature prevents dripping Electrically actuated foot pedal One channel without time controlled air Order No. Model T0053163699 KDS824A Order No. Model T0053165699 KDS834A Order No. Model KDS806V KDS806V Description Deluxe Shot Meter 230V/120V KDS834A ot time duration adjustable H from 0,01 to 99,99 seconds Vacuum feature prevent dripping Electrically actuated foot pedal Description Economy Shot Meter 230V/120V KDS806V asic ON-OFF function B Foot actuated for excellent ergonomics Works on compressed air input only, no electricity required 0 -100 PSI regulator and gauge Vacuum feature prevents dripping Description Foot Valve with Vacuum www.labem.pl 224 Dispensers Vacuum Pick-up wand KDS301 ttaches to the air accessory A port of the KDS824A A finger control on the wand allows an easily pick up of small components Comes with three sizes of conductive suction cups KDS260S (3,2 mm), KDS260M (6,3 mm), KDS260L (9,5 mm) Order No. Model KDS301 KDS301 Description Vacuum Pick-up Wand Spare Parts Suction Cups KDS301 Order No. Model Description KDS260S KDS260S Suction Cup Small 3,2 mm for KDS301 KDS260M KDS260M Suction Cup Medium 6,3 mm for KDS301 KDS260L KDS260L Suction Cup Large 9,5 mm for KDS301 www.labem.pl 225 Syringe Adapters Unique design works with all manufacturers syringes 360 swivel on adapter head for ease of motion Use with single component, two part, self-leveling and non-self-leveling materials Syringe Adapters Metal Adapters Assemblies (universal) etal syringe adapter with M 6" (2 m) air line and fitting Plugs directly into any shot meters Fittes all syringes usual in trade Order No. Size Airline Diameter Inch mm KDS805S6 5CC 3/32" 2,4 1 KDS810S6 10CC 3/32" 2,4 1 Miscellaneous Accessories Order No. KDS816 Description Syringe Holder Stand www.labem.pl 226 Pack quantity Dispensers Needles Stainless Steel Plastic Hub Dispensing Needles Order No. Description Gauge Inside O Inch mm Outside O Inch mm Length Colour Inch mm Pack quantity KDS1412P KDS141P Threaded Hub Needle 14 Threaded Hub Needle 14 0,067 0,067 1,70 1,70 0,083 0,083 2,11 2,11 1/2 12,70 1 25,40 dark green dark green 50 50 KDS1512P Threaded Hub Needle 15 0,060 1,52 0,072 1,83 1/2 12,70 orange 50 KDS1612P KDS161P KDS16112P Threaded Hub Needle 16 Threaded Hub Needle 16 Threaded Hub Needle 16 0,053 0,053 0,053 1,35 1,35 1,35 0,064 0,064 0,064 1,63 1,63 1,63 1/2 12,70 1 25,40 1 1/2 38,10 purple purple purple 50 50 50 KDS1712P Threaded Hub Needle 17 0,045 1,14 0,060 1,52 1/2 12,70 white 50 KDS1812P KDS181P Threaded Hub Needle 18 Threaded Hub Needle 18 0,038 0,038 0,97 0,97 0,050 0,050 1,27 1,27 1/2 12,70 1 25,40 pink pink 50 50 KDS1912P KDS191P Threaded Hub Needle 19 Threaded Hub Needle 19 0,032 0,032 0,81 0,81 0,042 0,042 1,07 1,07 1/2 12,70 1 25,40 brown brown 50 50 KDS2012P KDS201P Threaded Hub Needle 20 Threaded Hub Needle 20 0,026 0,026 0,66 0,66 0,035 0,035 0,89 0,89 1/2 12,70 1 25,40 yellow yellow 50 50 KDS2112P Threaded Hub Needle 21 0,023 0,58 0,032 0,89 1/2 12,70 green 50 KDS2212P KDS221P Threaded Hub Needle 22 Threaded Hub Needle 22 0,019 0,019 0,48 0,48 0,028 0,028 0,71 0,71 1/2 12,70 1 25,40 black black 50 50 KDS2312P Threaded Hub Needle 23 0,017 0,43 0,025 0,64 1/2 12,70 light blue 50 KDS2512P Threaded Hub Needle 25 0,012 0,30 0,020 0,51 1/2 12,70 blue 50 KDS3012P Threaded Hub Needle 30 0,006 0,15 0,012 0,30 1/2 12,70 lavender 50 KDS660 Pieces Needle Kit 500 KDSSAMPLEPACK Needle Sample Pack 5 Packages 1.000 pcs. on request www.labem.pl 227 Needles Tapered Tip Needles Order No. Description Gauge Inside O Colour Inch mm Pack quantity KDS14TNP Taper Tip Needle 14 0,063 1,60 salmon 50 KDS16TNP Taper Tip Needle 16 0,048 1,22 grey 50 KDS18TNP Taper Tip Needle 18 0,034 0,86 green 50 KDS20TNP Taper Tip Needle 20 0,024 0,61 pink 50 KDS22TNP Taper Tip Needle 22 0,017 0,43 blue 50 www.labem.pl 228 Dispensers Miscellaneous Accessories Order No. Description Pack quantity KDS825 Panel Mount Coupler 1 KDS900 Male Connector large Barb 5 KDS901 Female Connector for KDS301 1 TAL332CH Air-line for syring adapter 1 APC5132CM Air-line for KDS301 1 www.labem.pl 229 Contents Erem Tools Precision Made in Switzerland 232 - 233 Tweezers 234 - 257 Erem impresses 236 - 237 Special applications 238 - 239 Tweezers with pointed tips 240 - 247 Tweezers with flat round tips Tweezers with ergonomic handles SMD tweezers Locking gripping tweezers Wafer tweezers 249 250 - 252 253 254 - 255 Cutting tweezers 255 Stripping tweezers 256 Extraction tweezers 257 Cutters 258 - 299 Erem impresses 262 - 263 Choosing the right tool 264 - 269 Special applications 270 - 271 Series 600 Micro cutters 272 - 275 Series 2400 MagicSense cutters 276 - 279 Series 500 Medium cutters 280 - 285 Series 800 Maxi cutters 286 - 289 Tungsten-carbide cutters 290 - 293 Special applications 294 - 295 Pneumatic side cutters and tip cutters 296 - 297 Distance cutters 298 - 299 www.labem.pl 230 248 Pliers 300 - 313 Erem pliers 302 - 307 Stripping pliers 308 - 309 Forming pliers 310 - 313 Special tools 314 - 323 IC and SMD tools 316 - 317 Fibre optic tools 318 - 319 Vacuum micromanipulator 320 - 323 Kits 324 - 332 www.labem.pl 231 Tweezers Precision Made in Switzerland The quality and performance of our Erem precision tools are the product of more than 40 years of development and know-how. Made in Switzerland, Erem tools are the result of constant product development and innovation to meet customer demands and the requirements of modern manufacturing techniques. Constantly changing market developments encourage Erem to design and manufacture forward looking tools for appli cations in the fields of electronics, aviation / aero-space, biology, medical accessories, the watch industry and telecommunications. Erem tools enjoy the deserved high reputation of Swiss precision manufacture and our expertise, combined with ease of use and operator comfort make them an ideal partner in global manufacturing processes. Since 1963 The genuine Swiss pliers & tweezers www.labem.pl 232 Tweezers www.labem.pl 233 233 Tweezers Erem manufacture a wide range of tweezers. The combination of expert manufacture, symmetry and balance give Erem tweezers their renowned reputation for precision and the highest quality. Pointed tips for precision work Ergonomically shaped handles prevent hand fatigue Large selection of matching SMD tweezers and cutting tweezers for individual applications www.labem.pl 234 Tweezers www.labem.pl 235 Erem impresses Erem manufactures a wide range of precision tweezers. The range covers tweezers made from hardened steel, stainless steel, non-magnetic acid resistant stainless steel, titanium, brass, nickel silver and nickel-plated tweezers. Tweezer tips can be serrated or smooth metal, or made from synthetic ESD safe material to prevent damage to fragile surfaces. Erem can make to order tweezers for specialised applications. The combination of precision-manufactured, symmetrical tips and perfect balance make Erem t weezers outstanding high-precision tools of the highest quality. In addition to SMD and stripping tweezers, the range includes special gripping tweezers, which enable particularly fine wires or insulated optical fibres to be held and manipulated. Material The choice of which tweezers to use will depend as much on the material it is made from as the function it carries out: Hardened steel Tweezers made from hardened steel are typified by their particularly hard tips, which ensure great durability. The tweezers are magnetic and the material is not non-rusting. Stainless steel Titanium Tweezers made from stainless steel have robust tips and are non-rusting. The material is less hard than hardened steel. Titanium tweezers are light weight and resistant to high temperatures. Stainless-steel tweezers have the identification letter S" in their order numbers. Erem special stainless steel This alloy is non-magnetic. The tweezers are non-rusting, acid-proof and heatresistant up to 300C (512F). Tweezers made from special stainless steel tweezers have the identification letter SA" in their order numbers. www.labem.pl 236 Tweezers Coating Only Erem offers tweezers with a special Pyroplast coating. Advantages: Heat-resistant up to 500C (932F), almost twice as high as Teflon(R) or Cralon No capillary effect on tips, e.g. while soldering (non-stick property) No contamination caused by positive or negative charge Water-resistant Radiation-resistant Thickness of coating 60-80 The Pyroplast coating is not available on all Erem tweezers. It is made to order and requires a minimum order quantity. Please contact your nearest sales office for more information. Ergonomic Erem has developed a series of tweezers with ergonomic handles to reduce the risk of Repetitive Strain Injuries (RSI) to the hands. The identification letter in the order number is E". Erem also offers two further innovative tweezers with ergonomically shaped handles: Advantages: Ergonomically shaped handles reduce Carpal Tunnel Syndrome (CTS) and early hand fatigue Two-color, thermally insulated soft-grip handles made from soft foam material ensure high user comfort Manufactured from non-magnetic, acid-proof and stainless steel alloy ESD-safe E15AGW cutting tweezers with hardened cutting edges for increased service life EOODSA precision tweezers with straight strong tips which are inside-serrated for secure handling Teflon(R) is a registered Trademark of E.I. Dupont de Nemours and Company www.labem.pl 237 Special applications The quality and performance of Erem precision tweezers are the result of more than 40 years of development and know-how. Erem is one of the leaders in the development of high-precision tools for a wide variety of applications in electronics, aeronautical engineering, light engineering, telecommunications, laboratory technology, medicine and the jewelry, watchmaking and goldsmith industries. Tweezers for biology and laboratory applications Erem micro-tweezers are suitable for use in biology (e.g. model 5MBS, 5FSA or M5S). These tweezers with very pointed tips enable confined spaces to be accessed and offer excellent visibility when performing precision work and when working under a microscope. High precision tweezers are particularly suitable for analysis applications and the handling of tissues, fine threads and other very small objects. www.labem.pl 238 Tweezers Tweezers for use in the jewelry industry These stainless steel tweezers with Teflon(R) coated tips (e.g. type 2ASASLT) are particularly suited for use in the jewelry industry. They are robust and the Teflon(R) coated tips are non stick. Titanium tweezers type like 3CTA are also ideal for this application. Their lightweight maintains fingertip control over extended working periods and their resistance to high temperatures allows them to be used where gas flames might be encountered. Tweezers for use in light engineering and dental applications Erem offers special gripping pliers for appli-cations in light engineering. The lockable gripping tweezers type 940AS can withstand a tensile force of 5 kg and can securely hold small wires. The stainless steel construction allows the tweezers to be sterilised in an autoclave. www.labem.pl 239 Tweezers Precision tweezers: Pointed tips straight For applications in microelectronics, jewelrymaking, watchmaking, medicine and laboratory technology Suitable for delicate standard applications and precision work on small components or wires For all models with the suffix SA or SASL in the o rder number: Special stainless steel, non- magnetic, non-rusting, acid-proof, heat-resistant For all models with the suffix S in the order number: Stainless steel, robust tips, non-rusting, non-reflecting surface 80 mm/3.150 Inch Model M5S Description 6g 0.21 oz. Micro-tweezers, very pointed tips, e.g. for precision work under a microscope. 108 mm/4.252 Inch Model Description ACSA 0.56 oz.handling. 20AS 0.42 oz.serrated 16 g 12 g Precision tweezers with serrated finger grips for secure For precise bending and holding of components or wires. Precision tweezers with serrated finger grips and insidetips for secure handling. Guide pin to avoid overlapping of tips. For precise bending and holding of components or wires. www.labem.pl 240 Tweezers Precision tweezers: Pointed tips straight 110 mm/4.331 Inch Model Description 3CS 0.39 oz. 3CSA 0.39 oz. 11 g 11 g 3CSASL 11 g Precision tweezers with long tips for precision work on printed-circuit boards. Precision tweezers, standard model for delicate work. Same as 3CSA, but economy model. 0.39 oz. 3CTA 0.28 oz. 53CSA 0.39 oz.Prevents 8g 11 g Model same as 3CSA, but made from titanium: non-magnetic, very heat-resistant and very light. Precision tweezers with anti-crush feature. damage to sensitive components. Tweezers relieved at front for secure handling. 120 mm/4.724 Inch Model Description 3SA 0.49 oz. 3SASL 0.49 oz. 1SA 0.49 oz. 1SASL 0.49 oz. OOSA 0.71 oz. Suitable 14 gPrecision tweezers with pointed tips for work in microelectronics. 14 g 14 g 14 g 20 g Same as 3SA, but economy model. Precision tweezers with pointed tips for standard applications.. Same as 1SA, but economy model. Precision tweezers with pointed tips. Very robust. for standard applications, e.g. for assembly in electronics. www.labem.pl 241 Tweezers Precision tweezers: Pointed tips straight 120 mm/4.724 Inch Model Description OOSASL* 0.71 oz. OOCSA 0.64 oz. OOBSA 0.71 oz. OODSA 0.71 oz. 64SA 0.60 oz. 11N 0.60 oz. AAZ* 0.56 oz. 20 g 18 g Same as OOSA, but economy model. Model same as 00SA, but with shorter tips. 20 gModel same as 00SA, but with serrated finger grips for secure handling. 20 g 17 g Model same as 00SA, but with serrated finger grips and inside-serrated tips for secure handling. Precision tweezers with pointed tips and serrated finger grips for secure handling. 17 gPrecision tweezers with medium-pointed tips for use on soft components. Nickel-silver, non-magnetic. 16 g Precision tweezers with medium-pointed tips, nickel-plated. Suitable for electronic assembly tasks. 125 mm/4.921 Inch Model Description AAS 0.56 oz. AASA 0.56 oz. AASASL* 0.56 oz. 16 g 16 g 16 g Precision tweezers with fine but robust tips. Precision tweezers with fine but robust tips for standard applications. Same as AASA, but economy model. *Not available in North America www.labem.pl 242 Tweezers Precision tweezers: Pointed tips straight 125 mm/4.921 Inch Model Description AM 17 g Precision tweezers made from brass. The soft protects sensitive components against damage. No sparks. 0.60 oz.metal 130 mm/5.118 Inch Model Description 249SA 20 gPrecision tweezers with pointed synthetic tips (PPS) and 0.71 oz. serrated finger grips for secure handling. Volume resistance 16 /cm. Heat-resistant up to 250C (480F). Resistant to acids and molten soldering tin. Water-repellent. 249CER* 24 g 0.84 oz. Same as 249SA, but with ceramic tips. Heat-resistant up to 900C (1500F). 140 mm/5.512 Inch Model RRS Description 30 g 1.05 oz. SSSA 11 g 0.39 oz. Precision tweezers with strong tips for heavy-duty applications. Precision tweezers with long, narrow grips and low tension, responds to minimal pressure. The long grips allow precision work close to heat sources. 150 mm/5.906 Inch Model Description 29SA 26 gReverse-action tweezers with wide, rounded tips. For hol 0.92 oz. ding parts by reverse clamping action. Insulated handles, e.g. for protecting against heat. 160 mm/6.299 Inch Model Description 21SA 23 g 0.81 oz. Precision tweezers with medium-pointed tips and serrated finger grips and inside-serrated tips for secure handling. Very robust. The long grips allow precision work close to heat sources. www.labem.pl *Not available in North America 243 Tweezers Precision tweezers: Pointed tips straight relieved For precision work e.g. under a microscope Relieved shape facilitates excellent access to the most confined spaces For all models with the suffix SA or SASL in the o rder number: Special stainless steel, non- magnetic, non-rusting, acid-proof, heat-resistant For all models with the suffix S in the order number: Stainless steel, robust tips, non-rusting, non-reflecting surface 90 mm/3.543 Inch Model M4AS* Description 9g 0.32 oz. Micro-tweezers, very pointed tips, e.g. for working under a microscope. 110 mm/4.331 Inch Model Description 4SA 0.46 oz. 4SASL 0.46 oz. 13 g 13 g Precision tweezers with very pointed tips. Same as 4SA, but economy model. *Not available in North America www.labem.pl 244 Tweezers Precision tweezers: Pointed tips straight relieved 115 mm/4.528 Inch Model Description 5MBS* 12 g 0.42 oz. Precision tweezers with extremely pointed tips (~ 0.03 x 0.07 mm/.002 Inch) for use in dissection procedures and working under a microscope. For use on soft materials only. 5FSA* 12 g 0.42 oz. Precision tweezers with extremely pointed tips (~ 0.05 x 0.1 mm/.003 Inch) for use in dissection procedures and working under a microscope. For use on soft materials only. 5SA 0.42 oz. Precision tweezers with very pointed tips, suitable for very fine wires. 5SASL 0.42 oz. 2SA 0.56 oz. 2SASL 0.56 oz. 12 g 12 g 16 g 16 g Same as 5SA, but economy model. Precision tweezers with medium-pointed tips. Same as 2SA, but economy model. 120 mm/4.724 Inch Model Description 258SA 15 g 0.53 oz. Precision tweezers with pointed synthetic tips (PPS) and serrated finger grips for secure handling. Volume resistance 16 /cm. Heat-resistant up to 250C (480F). Resistant to acids and molten soldering tin. Water-repellent. *Not available in North America www.labem.pl 245 Tweezers Precision tweezers: Pointed tips bent For applications in biology, medicine, laboratory technology and microelectronics Bent shape facilitates access to confined spaces For all models with the suffix SA or SASL in the order number: Special stainless steel, nonmagnetic, non-rusting, acid-proof, heat-resistant For all models with the suffix S in the order number: Stainless steel, robust tips, non-rusting, non-reflecting surface 110 mm/4.331 Inch Model Description 3CBS 15 g 0.53 oz. Precision tweezers, curved 40, with pointed tips, for precision work such as assembly on printed-circuit boards. 115 mm/4.528 Inch Model Description 5CSA 12 gPrecision tweezers, curved 30, relieved. Pointed tips. 0.42 oz. Relieved shape at front of handle provides excellent visibility of the area to be worked on. 5BSA 12 gPrecision tweezers, curved 30, relieved. Pointed tips. 0.42 oz. Relieved shape at front of handle provides excellent visibility of the area to be worked on. 51SA 12 gPrecision tweezers, curved 30, relieved. Very pointed tips. 0.42 oz. Relieved shape at front of handle provides excellent visibility of the area to be worked on. www.labem.pl 246 Tweezers Precision tweezers: Pointed tips bent 115 mm/4.528 Inch Model Description 51SASL 0.42 oz. 5ASA 0.42 oz. 5ASASL 0.42 oz. 12 g 12 g 12 g Same as 51SA, but economy model. Precision tweezers, lightly curved 15, relieved. Very pointed tips, e.g. for installing small components. Same as 5ASA, but economy model. 120 mm/4.724 Inch Model Description 7SA 0.53 oz. 7SASL 0.53 oz. 15 g 15 g Precision tweezers, curved, relieved, with pointed tips. Excellent handling in confined spaces. Same as 7SA, but economy model. 140 mm/5.512 Inch Model Description 65ASA 11 g 0.39 oz. Precision tweezers, curved 50. Very pointed tips. For working with extra-small chips and other miniature components. 150 mm/5.906 Inch Model Description 24SA 22 g 0.78 oz. 30SA Precision tweezers, curved 40, with robust pointed tips. Serrated finger grips and inside-serrated tips for secure handling. Guide pin to avoid overlapping of tips. Ideally suitable for soldering and assembly jobs. 26 gReverse-action tweezers, curved 30, with robust pointed Fibreglass handles for protection against heat. Reverse clamping action for comfortably holding parts. Particularly suitable for soldering and assembly jobs. 0.92 oz.tips. www.labem.pl 247 Tweezers Precision tweezers: Flat round tips straight Suitable for all standard gripping applications and assembly jobs on printed-circuit boards, e.g. in the goldsmith and jewelry industries For all models with the suffix SA or SASL in the order number: Special stainless steel, nonmagnetic, non-rusting, acid-proof, heat-resistant 120 mm/4.724 Inch Model Description 2ASA 0.53 oz. 2ASASL 0.53 oz. 15 g 15 g 2ASASLT* 0.56 oz. 2ASARU 0.56 oz. 16 g Same as 2ASA, but economy model. Same as 2ASA, but with Teflon(R)-coated tips for non-stick holding of self-adhesive parts. 16 gSame as 2ASA, but with coated tips for non-stick holding of self-adhesive parts. 25SA 15 g 0.53 oz. 52ASA Precision tweezers with flat rounded tips for gripping small components. Tip width 2 mm/.078 Inch. Precision tweezers with flat, round tips slightly wider than the 2ASARU model. Serrated finger grips for secure handling. For standard gripping jobs. 15 gPrecision tweezers with pointed, rounded and flexibly movable tips. Prevents damage to sensitive components. 0.53 oz. *Not available in North America www.labem.pl 248 Tweezers Precision tweezers with ergonomic handles This series offers models with thin shaped tips to suit every application Ergonomically shaped handles reduce hand fatigue and facilitates comfortable working Thermally insulated, soft foam handles, ESD-safe For all models with the suffix SA in the order number: Special stainless steel, non-magnetic, non-rusting, acid-proof, heat-resistant 120 mm/4.724 Inch Model Description E5SA 0.88 oz. E3CSA 0.88 oz. EOOSA 1.05 oz. EOODSA 1.05 oz. E7SA 0.99 oz. 25 gErgonomic precision tweezers with straight, very pointed tips for gripping fine wires. 25 gErgonomic precision tweezers with long, straight and pointed tips, e.g. for assembly jobs on printed-circuit boards. 30 gErgonomic precision tweezers with straight, strong tips for standard applications. Very robust. 30 gModel same as EOOSA, but with inside-serrated tips. 28 gErgonomic precision tweezers with curved strong tips, e.g. for working in confined spaces. E2ASA 28 gErgonomic precision tweezers with straight, flat 0.99 oz. and rounded tips for simple gripping jobs. Tip width 2 mm/.078 Inch. E15AGW 30 gCutting tweezers, carbon-steel tips. 1.05 oz. www.labem.pl 249 Tweezers SMD tweezers High-quality precision tweezers for SMD jobs with different designs (chip, MELFs, mini MELFs) Blunted edges prevent damage to printed-circuit boards SMD tweezers - Angled tips Suitable for perfect handling of chips and miniature components Suitable for assembling SMD printed-circuit boards or ceramic substrates Bent shape facilitates optimum access to confined spaces and provides excellent visibility of the area to be worked on For all models with the suffix CA in the order number: Special stainless steel, non-magnetic, non-rusting, acid-proof, heat-resistant 115 mm/4.528 Inch Model Description 102ACA 0.53 oz. 102ACAX 0.49 oz. 103ACA 0.53 oz. 15 gSMD tweezers, angled 45, with pointed tips for vertical application. 14 gModel same as 102ACA, but reverse clamping action for easy holding. 15 gSMD tweezers, angled 45, with slightly wider tips for vertical application. www.labem.pl 250 Tweezers SMD tweezers - Round tips straight Suitable for gripping and holding round components and wires Blunted edges prevent damage to printed-circuit boards For all models with the suffix SA in the order number: Special stainless steel, non-magnetic, non-rusting, acid-proof, heat-resistant 110 mm/4.331 Inch Model Description 39SA 0.53 oz.Serrated 40SA 0.53 oz.Serrated 15 g 15 g SMD tweezers with round tips, dia. 0.3 mm/.011 Inch. finger grips for secure handling. For gripping small wires and cylindrical components. SMD tweezers with round tips, dia. 0.4 mm/.015 Inch. finger grips for secure handling. For gripping small wires and cylindrical components. 120 mm/4.724 Inch Model Description 150SAMF 0.46 oz..047 150SAD 0.46 oz..059 150SA 0.46 oz..059 151SA 0.46 oz..118 13 g SMD tweezers with round, very narrow tips, dia. 1.2 - 2.5 mm/ - .098 Inch. Serrated finger grips for secure handling. For gripping cylindrical components, mini MELFs, etc. 13 gSMD tweezers with round tips, dia. 1.5 - 3 mm/ -.118 Inch.Serrated finger grips for secure handling. For gripping cylindrical components, mini MELFs, etc. 13 g 13 g SMD tweezers with round tips, dia. 1.5 - 3 mm/ -.118 Inch. Serrated finger grips for secure handling. For gripping cylindrical components. SMD tweezers with round tips, dia. 3 - 6 mm/ -.236 Inch. Serrated finger grips for secure handling. For gripping cylindrical components. www.labem.pl 251 Tweezers SMD tweezers - Round tips bent Suitable for gripping fine wires and cylindrical components Blunted edges prevent damage to printed-circuit boards For all models with the suffix SA in the order number: Special stainless steel, non-magnetic, non-rusting, acid-proof, heat-resistant 115 mm/4.528 Inch Model Description 32BSA 0.60 oz. 32BSA20* 0.60 oz. 32BSA25 0.60 oz. 17 gSMD tweezers, angled 45, with round tips, dia. 5 mm/.197 Inch. 17 g SMD tweezers, angled 45, with round tips, dia. 2 mm/.078 17 gMD tweezers, angled 45, with round tips, dia. 2.5 mm/.098 Inch. 150SAMB 13 gMD tweezers, angled 40, with round tips, 0.46 oz. dia. 1.2 - 2.5 mm/ .047 - .098 Inch. Serrated finger grips for secure handling. *Not available in North America www.labem.pl 252 Tweezers Locking Gripping Tweezers Gripping tweezers enable the user to hold and manipulate particularly fine wires with a diameter from 0.3 mm/.011 Inch or insulated optical fibres with a diameter of between 1.5 mm/.059 Inch and 5 mm/.197 Inch Suitable as a ligature clamp in dentistry Can be disinfected and sterilized 120 mm/4.724 Inch Model Description 940AS* 17 g Gripping tweezers with locking mechanism. ring-shaped tip provides for secure handling up to a tensile force of 5 kg. 0.60 oz.The *Not available in North America www.labem.pl 253 Tweezers Wafer tweezers Suitable for 3" to 6" wafers Serrated finger grips for secure handling Wafer tweezers are available to order in various sizes and coatings For all models with the suffix SA in the order number: Special stainless steel, non-magnetic, non-rusting, acid-proof, heat-resistant 125 mm/4.921 Inch 130 mm/5.118 Inch A = Paddle width B = Paddle depth Model Dimensions in mm/Inch A B Description 91SA 12 7 .472 .276 15 g 0.53 oz. Model Dimensions in mm/Inch A B Description 600ASA 23 g 0.81 oz. 19,5 608ASA 23 g 0.81 oz. 600JSA 24 g 0.84 oz. .768 30 8Wafer tweezers with flat lower paddle and .3156 upper fingers for protecting wafers against damage. For 6" wafers. 8,5Model same as 600ASA, but 30 mm/1.181 Inch wide. 1.181 .276 20 8Wafer tweezers with free-floating Teflon(R) .315upper paddle for secure, damage-free gripping. For 4" - 6" wafers. .787 www.labem.pl 254 Standard wafer tweezers for 3" and 4" wafers. Tweezers Wafer tweezers 150 mm/5.906 Inch Model Dimensions in mm/Inch A B Description 141SAP 30 8 1.181 .315protecting 30 g 1.05 oz. Wafer tweezers with polyester tips for Si, GaAs or Ti wafers against damage. For 4" - 6" wafers. Cutting tweezers Suitable for cutting fine, soft wires and small components Delivers high-precision cuts Hardened cutting edges for long service life For all models with the suffix S in the order number: Stainless steel, robust tips, non-rusting, non-reflecting surface 115 mm/4.528 Inch Model Description 15AGS 0.74 oz. 15AGW 0.92 oz. 21 g Cutting tweezers with narrow oblique head. For soft wires up to dia. 0.25 mm/.010 Inch. 26 gSCutting tweezers with narrow oblique head. For soft wires up to dia. 0.25 mm/.010 Inch. www.labem.pl 255 Tweezers Stripping tweezers Suitable for stripping fine wires with PVC or Teflon(R) insulation Non-reflecting surface Please send a wire sample when ordering 120 mm/4.724 Inch Model Description 29Y30* 0.78 oz. 29Y32* 0.78 oz. 29Y34* 0.78 oz. 29Y36* 0.78 oz. 29Y40* 0.78 oz. 22 g Miniature stripping tweezers, dia. 0.25 mm/.010 Inch (AWG 30). Stainless steel. Serrated finger grips for secure handling. 22 gMiniature stripping tweezers, dia. 0.2 mm/.007 Inch (AWG 32). Stainless steel. Serrated finger grips for secure handling. 22 gMiniature stripping tweezers, dia. 0.16 mm/.006 Inch (AWG 34). Stainless steel. Serrated finger grips for secure handling. 22 gMiniature stripping tweezers, dia. 0.13 mm/.005 Inch (AWG 36). Stainless steel. Serrated finger grips for secure handling. 22 gMiniature stripping tweezers, dia. 0.08 mm/.003 Inch (AWG 40). Stainless steel. Serrated finger grips for secure handling. 120 mm/4.724 Inch Model Description 29W30 28 gStripping tweezers with synthetic fibre handle. For wires 0.99 oz. of dia. 0.25 - 0.3 mm/.010 - .011 Inch (AWG 30 - 28). For standard and Teflon(R) insulation. XB29W301 Spare blade for 29W30 *Not available in North America www.labem.pl 256 Tweezers Extraction tweezers A = Outside diameter of pin B = Inside diameter of pin Suitable for extracting contacts from the rear of a plug connector 120 mm/4.724 Inch Model Dimensions in mm/Inch OA O B Description 024C 12 15 g 0.53 oz. .472 7Extraction tweezers for Sub-D connectors. .276 Stainless steel. www.labem.pl 257 Side Cutters and Tip Cutters Erem offers a wide range of precision side and tip cutters for almost every application Special tool steel is hardened with an unique Swiss technology This particular hardening process guarantees high durability www.labem.pl 258 www.labem.pl 259 259 Side Cutters and Tip Cutters Side Cutters and Tip Cutters ESD-safe The interchangeable foam-cushion handles are ESD-safe and are fitted as standard on all Erem cutters and pliers. 10 conductive 100 EMI/RF Sources:DOD/CECC static dissipating 105 antistatic 1012 insulating 1020 /cm2 Erem cutters and pliers Internal patented Erem Magic Spring Reduce costs by long life Constant spring force Guarantees more than 1 million operations High precision screw joint Smooth jaw action with no play Smooth cutting operation with no jaw overlapping Erem Cut: Options for semi flush, full flush or super flush cuts www.labem.pl 260 Side Cutters and Tip Cutters Ergonomically shaped handles for high comfort, better grip and added safety EMOS maximum opening stop limits the cutting-edge tips from opening more than 5 mm/.197 Inch. The limited extent to which the handles can open prevent user hand fatigue. Erem cutting-edge protection for tip cutters All tip cutters are fitted with a special stop system which prevents the cutting edges from overlapping. Induction-hardened cutting edges in Rockwell hardness 63 - 65 HR Safety device for holding wire scraps This safety device for side cutters holds wire scraps securely after cutting. Available on most Series 500, 600 and 2400 cutters (oval head). Order suffix W", e.g. 595EW. for exceptionally long life www.labem.pl 261 Erem impresses Erem Technology Handle Special tool steel Erem cutters and pliers with ergonomic handles Erem electronics tools are made from bright steel. They are not drop forged. The special tool steel is made using an unique Swiss processing technique. The bright tool steel gives additional strength and toughness to the tools pro-moting a long service life. Work Related Upper Limb Disorder (WRULD) can be caused by positional fatigue or nerve damage brought about by the repeated use of non-ergonomic hand tools, otherwise known as Repetitive Strain Injuries (RSI). High precision screw joint This self locking screw joint system gives a smooth cutting and opening action and ensures that there is no blade overlap or play. Precision cutting and reduced shock to components. The internal patented Erem Magic Spring The Magic Spring system used in Erem precision tools is unique. It is integral to the cutting head and provides a constant closing and re-opening force. It is guaranteed for 1 million operations. The Magic Spring system is highly reliable, makes the tools easy to use and reduces operator fatigue. EMOS maximum opening stop The unique EMOS (Erem Maximum Opening Stop) system prevents the tips from opening more than 5 mm/.197 Inch. It reduces user fatigue by preventing excessive hand spread. Comfortable and fatigue free working. www.labem.pl 262 WRULDS is a direct consequence of insufficient ergonomics in manufacturing processes and working practices. To reduce the factors which cause WRULDS, Erem has developed a range of tools with ergonomic handles (Series 2400 MagicSense). The handle shape and special m aterials ensure a soft feel, operating comfort and safety. The specially shaped handles ensure that the gripping pressure is evenly spread over the entire palm of the hand. The thumb and fingers automatically find their best position. The effort that has to be exerted by the user is reduced, thereby reducing hand fatigue. The anti-slip surface provides excellent grip. The material is highly resistant to perspiration, water, oil and chemicals. The handles are ESD-safe and are easily interchangeable. Semi Flush SF Semi Flush SF Semi Flush SF Erem Service Cut shape Rockwell hardness Re-sharpening There are three blade options, which determine the shape left on a lead after cutting. (see also P. 35) The cutting blades of Erem cutters are hardened to Rockwell 63-65 HRc by an induction heating process. Continuous process control ensures that the blades achieve the correct level of hardening and are not embrittled. Erem is your service partner. All Erem side and tip cutters except those with carbide insert blades can be re-sharpened up-to three times.Carriage charges will apply. 1. Semi-flush The re-sharpened tool is as good as new, its life is extended and costs are reduced. Flush F Flush F Flush F 2. Flush er Full Flush FF er Full Flush FF er Full Flush FF 3. Super full flush This level of hardening plus the high-grade tool steel used in the manufacture of the tools and continuous process control promote an exceptionally long service life. Replacement parts Erem cutters and pliers and their component parts are warranted against manufacturing defects. Magic springs, precision joint components are available as spare parts. Cutting edge Erem cutters are noted for their ease of use, one of the reasons for this is the ability of the blade to cut equally well over its full length. This promotes operator comfort and reduces fatigue. The warranty and availability of spares guarantee long service life. Semi-flush cutters offer the best performance and the longest service life. Super full flush cutters leave a flat wire end with minimal effort and prevent components from being subjected to load. High level of user comfort thanks to special cutting edge. ESD-safe The ergonomic, interchangeable molded handles are ESD-safe and are fitted as standard on all Erem cutters and pliers. Erem cut Super full flush: perfect flush cut Standard cut Super full flush" www.labem.pl 263 Side Cutters and Tip Cutters Erem Cut Choosing the right tool Selection criteria Erem offers a wide selection of precision side and tip cutters for virtually any application. When choosing the right cutter, it is important to take Size Cut Head shape Cutting capacity into consideration. Size Erem offers the right head size to suit every application. There are three main sizes: Micro, M edium and Maxi. Each head size is available in different head shapes. Head width Head thickness Classification of cutter heads Micro Medium Series 600 Series 2400 MagicSense Series 500 Series 800 Size Head width 9.0 mm/.354 Inch Head thickness 6.0 mm/.236 Inch Head width 11.0 mm/.433 Inch Head thickness 6.0 mm/.236 Inch Head width 11.0 mm/.433 Inch Head thickness 6.5 mm/.256 Inch Head width 13.5 mm/.531 Inch Head thickness 7.5 mm/.295 Inch Miniature cutter for applications in microelectronics and for fine wires. Offers a large variety of head shapes for very good access even to hard-to-reach areas. Maxi Medium-size cutter. Combines robustness, visibility and accessibility. Large variety of head shapes for precision working in hard-to-reach areas. The Series 2400 MagicSense offers an optimised ergonomic shape and an improved grade of hardness. www.labem.pl 264 The strongest and most robust head size for general cutting applications in electronics, cuts large wire diameters. There are three blade options, which determine the shape left on a lead after cutting. Erem cut Super full flush: perfect flush cut Semi-flush Semi Flush SF Flush F Standard cut Super full flush" This cut leaves a pyramidal tip at the end of the wire. It is particularly suitable for standard jobs where the final shape does not play a significant role. Cutters with this cut are suitable for both soft copper wires and very hard wires such as stainless steel. Semi SF Full Flush FF Flush Flush F r Full Flush FF Semi Flush SF This cut leaves a much smaller tip at the end of the wire than the semi-flush cut - without reducing the cutting capacity. The cutting edges are finer than on semi-flush cutters. The effort exerted when cutting is less and the load on the component is reduced. Flush wire ends reduce the effort needed to fit components on printedcircuit boards. Erem guarantees precise cutting even after frequent use. Flush F r Full Flush FF Super full flush Only Erem offers you a super full flush cut. This cut provides absolutely flush wire ends. No rework is needed. Cutters with this cut are absolutely precision-ground and sharpened. The effort exerted when cutting is low, as is the load on the component caused by the cut. Soldering tags in soldering-bath procedures are prevented. Cutters of this type are used in microelectronics, space travel or medical technology. These cutters are suitable for soft wires. www.labem.pl 265 Side Cutters and Tip Cutters Cut Choosing the right tool Head shape Erem offers the right head shape to suit your application. The head shapes differ in terms of shape and design. There are six basic shapes: Shape Tip cutter Straight relieved head Tip cutter Pointed relieved head Tip cutter Angled narrow head This head is suitable for horizontal and vertical cuts. The long tips facilitate cutting in hard-to-reach areas. This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. The angled head provides for precise cuts at different working angles. Series 600 Micro 670E*, 670EP*, 670EPF* (P. 265) 622NB, 632NCF, 676E, 776E (P. 264) Series 2400 MagicSense 2470E (P. 269) 2475E, 2482E (P. 269) Series 500 Medium 570E, 573E** (P. 275) 555E, 572E, 582E (P. 53) 575E, 593AE (P. 273) Visibility and accessibility Cutting at the outermost tip of the cutter Series 800 Maxi 592E, 792E (P. 274) 884E (P. 278) * Very short head ** Straight head for vertical working Erem cutting-edge protection for tip cutters Erem tip cutters are equipped with cutting-edge protection.A special stop system prevents the cutting edges from overlapping. www.labem.pl 266 Side cutter Tapered head Side Cutters and Tip Cutters Tip cutter Angled wide head Side cutter Oval head High cutting capacity Cutting over the full length of the cutter This is the most widely used head shape, it is robust and size for size offers the highest cutting capacity. The angled head provides for precise cuts at different working angles. The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. 622NA (P. 264) 612N, 622N, 632N (P. 263) 2403E, 2404E (P. 48) 2477E (P. 268) 2412E, 2422E, 2432E (P. 267) 503E, 504E (P. 52) 577E, 595E (P. 272) 512E, 512N, 522N, 532N, 599E (P. 271) 886E (P. 278) 812N, 822N, 896E (P. 277) Erem offers carbide cutters (see P. 39) for cutting high-hardness wire (piano wire). www.labem.pl 267 Choosing the right tool Wire quality Piano wire, stainless spring steel wire, material 1.4310, tensile strength 2000-2400 MPa Hard wire, stainless steel wire, material 1.4301, tensile strength 1800 MPa Medium-hard wire, stainless steel wire, material 1.4301, tensile strength 800 MPa Soft wire, copper, aluminium, tensile strength 250 MPa Model Cut Cutting capability mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078 Semi Flush SF Semi Flush SF Semi Flush SF 612N 622N Flush F Flush F Flush F Semi Flush SF 632N Super Full Flush FF Super Full Flush FF Super Full Flush FF 622NA Flush F Semi-flush Flush Super full flush Flush Semi Flush SF Super Full Flush FF Semi Flush SF Semi Flush SF Flush F 622NB Semi Flush SF Flush Flush F Super Full Flush FF Flush Flush F 676E Flush F Super Full Flush FF 776E Super Full Flush FF Semi Flush SF Super Full Flush FF 632NCF Semi Flush SF Flush F 670E Super full flush Super full flush Flush Semi Flush SF Flush F Super Full Flush FF Flush Flush F Super Full Flush FF Flush 670EP 670EPF Only for soft materials: silicone, rubber, etc. For micro-package contacts Only for micro pitches under 0.5 mm / .019 Inch Super Full Flush FF mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078 Series 2400 MagicSense Semi Flush SF Semi Flush SF Semi Flush SF 2412E Flush F Flush F 2422E Flush F Semi Flush SF Super Full Flush FF 2432E Super Full Flush FF Super Full Flush FF 2477E Flush F Semi-flush Flush Super full flush Flush Semi Flush SF Super Full Flush FF Semi Flush SF 30 F 2403E Flush Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF 2475E 45 Flush Flush F Super Full Flush FF 2470E Flush 2404E 30 2482E 45 Super Full Flush FF www.labem.pl 268 Cut Cutting capability mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078 Series 500 Medium Semi Flush SF 512N Semi Flush SF Semi Flush SF Flush F Semi Flush SF 512E Semi Flush SF Flush F 522N Flush F Super Full Flush FF Flush F Flush F Super Full Flush FF 599E Super Full Flush FF Semi Flush SF 532N Super SuperFull FullFlush Flush FF FF Semi Flush SF Flush F 595E Semi-flush Semi-flush Flush Flush Super full flush Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF 30 593AE Semi Flush SF Flush Semi Flush SF Flush F Super Full Flush FF 575E Flush 577E 503E 504AE 555E 35 572E 40 582E 45 582EW 45 Flush F Flush F Super Full Flush FF 592E Semi Flush SF 792E Super Full Flush FF Super Full Flush FF 570E Flush F Flush Super full flush Flush Semi Flush SF Super Full Flush FF 573E Flush F Flush Super Full Flush FF mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078 Series 800 Maxi Semi Flush SF 812N Semi Flush SF Semi Flush SF Flush F 896E Semi Flush SF Flush F 822N Flush F Super Full Flush FF Flush F Super Full Flush FF 886E Super Full Flush FF For vertical cutting Semi-flush Semi-flush Flush Flush Semi Flush SF Super Full Flush FF 884E Flush F Flush Super Full Flush FF mm 0,03 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1,0 1,1 1,2 1,3 1,4 1,5 1,6 1,7 1,8 1,9 2,0 Inch .0001 .003 .007 .011 .015 .019 .023 .027 .031 .035 .039 .043 .047 .051 .055 .059 .062 .066 .070 .074 .078 Semi Flush SF Tungsten-carbide cutters 622TX Flush F Semi Flush SF Flush 599T Super Full Flush FF Semi-flush Flush F 599TF Flush F Flush 595T Super Full Flush FF Semi-flush Semi Flush SF Semi Flush SF Semi Flush SF Super Full Flush FF Semi Flush SF Flush F 595TF Flush F Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Semi Flush SF Flush F Super Full Flush FF Flush Flush F Super Full Flush FF 576TX Flush Semi Flush SF 503ET 30FF Super Full Flush Semi-flush Semi Flush SF 503ETF 30F Flush Semi-flush 2476TX1 Super Full Flush FF 576TX1 2476 TX Flush F Super Full Flush FF Super Full Flush FF www.labem.pl 269 Side Cutters and Tip Cutters Model Special applications Side cutters for use in medical device manufacturing The 632NCF miniature side cutter is ideally suitable for soft material such as silicone tubes in medical device applications, precision connector seals or miniature rubber seals. The miniature cutter is also the ideal tool for cutting soft synthetic parts, e.g. in the manufacture of hearing aids. The cutting edges of the 632NCF side cutter are precision-ground to an extremely high level. This enables the cutter to deliver a razor-like full-flush cut. Tip cutters to remove fine pitch SMD ICs A simple method to remove SMD ICs is to cut each of the individual leads to remove the device and then reflow the joint with a soldering iron and remove the component lead from the board. The solder left on the board can then be removed with a desoldering tool or desolder braid and a new component fitted. The 670EP and 670EPF have fine pointed tapered and relieved heads that are able to fit between individual leads and cut them without causing damage to the printed circuit. www.labem.pl 270 Side Cutters and Tip Cutters Tungsten-carbide cutter for the preparation of cardio-vascular stents A stent is a vascular-wall prop. It is a lattice-shaped tube made of stainless steel or nickel-titanium. It serves to hold open constricted coronary blood vessels and improves the flow of blood through the vessels. It is important in stent manufacture that the cut end of any wire in the lattice is as flat as possible, otherwise it will be necessary rework the stents. These side cutters have fine polished carbide cutting blades to accurately cut the lattice and reduce the need for rework. High precision side cutter for cutting stainless wires The 599TFO has wear resistant tungsten carbide cutting edges and all round capability. It is able to cut VectranTM braided wires, fibre optics, Kevlar(R) and small stainless steel braids and wires. A further application lies in telecommunications, i.e. working on fibre-optic cables, Kevlar(R) silks and piano wires. VectranTM is a Trademark of Kurary Co., Ltd. Kevlar(R) is a registered Trademark of E.I. Dupont de Nemours and Company www.labem.pl 271 Side Cutters and Tip Cutters Series 600 Micro Miniature cutters Offers a wide variety of head shapes for access in difficult to reach areas Suitable for SMD and leads (670EP, 670EPF) Made from high grade tool steel with cutting edges hardened to 63-65HRc Non reflecting surface, ESD safe, resharpenable www.labem.pl 272 Side Cutters and Tip Cutters Series 600 Micro D A B C D Tip cutter Straight short relieved head = length of cutting edges = head width = head thickness = head length Tip cutter Pointed relieved head Side cutter Tapered head Visibility and accessibility Side cutter Oval head Robustness, high cutting capacity Side cutter - oval head 110 mm/4.331 Inch 48 g/1.69 oz. Model Cut Semi Flush SF 612N Semi Flush SF Semi-flush Flush F 622N Semi Flush SF Flush F Super Full Flush FF Flush Flush F Dimensions in mm/Inch A B C D This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity. Max. cutting capability in mm/Inch Diameter Hard wire Medium hardness Copper wire 9 9 6 15 0.5 0.81.3 .354 .354 .236 .590 .019 .031.051 9 9 6 15 - .354 .354 .236 .590 0.8 1.3 .031.051 Super Full Flush FF 632N Super Full Flush FF Super full flush Wire quality, see P. 38 9 9 6 15 .354 .354 .236 .590 - 0.7 1.3 .027.051 www.labem.pl 273 Side Cutters and Tip Cutters Series 600 Micro Side cutter - tapered head 110 mm/4.331 Inch 48 g/1.69 oz Model Cut Semi Flush SF 622NA Flush F Flush Dimensions in mm/Inch A B C D The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 9 9 6 15 0.7 1.0 .354 .354 .236 .590 .027 .039 Super Full Flush FF Tip cutter - pointed relieved head Model Semi Flush SF Cut Flush F 622NB Flush Semi Flush SF Super Full Flush FF 676E Semi Flush SF Flush F Flush F Flush 110 mm/4.331 Inch 48 g/1.69 oz. This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. Dimensions in mm/Inch A B C D Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 9 9 6 15 0.6 0.8 .354 .354 .236 .590 .023 .031 Model same as 622NB, but with short, robust head 9 9 6 15 .354 .354 .236 .590 9 9 6 15 0.6 0.8 .354 .354 .236 .590 .023 .031 For soft material such as small silicone tubes, miniature rubber seals or for cutting soft synthetic parts Super Full Flush FF 776E Semi Flush SF Super Full Flush FF full flush FlushSuper F 632NCF Super Full Flush FF 9 9 6 15 .354 .354 .236 .590 Super full flush www.labem.pl 274 Side Cutters and Tip Cutters Series 600 Micro Tip cutter - straight short relieved head 110 mm/4.331 Inch 48 g/1.69 oz. Model Semi Flush SF Cut Flush F Dimensions in mm/Inch A B C D Suitable for cutting SMD and micro-package contacts. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 670E Flush Semi Flush SF 9 9 6 18 0.5 0.8 .354 .354 .236 .709 .019 .031 670EP Flush F 9 9 6 18 0.4 0.6 .354 .354 .236 .709 .015 .023 Super Full Flush FF Super Full Flush FF Semi Flush SF FlushHigh-precision working on SMD and micro-package contacts up to 0.25 mm/.010 Inch 670EPF* Flush F Super Full Flush FF 9 9 6 18 .354 .354 .236 .709 Model same as 670EP, but smaller version only for micro pitches under 0.5 mm/.019 Inch (see also P. 40) Flush *Not available in North America www.labem.pl 275 Side Cutters and Tip Cutters Series 2400 MagicSense Medium-size cutter Combines robustness, visibility and accessibility. Large variety of head shapes for precision working in hard-to-reach areas. The optimised ergonomic shape of the Series 2400 MagicSense prevents hand fatigue Improved induction-hardened cutting edges up to 64 - 65 HRc for an extremely long service life Cutting edges made from special tool steel Non-reflecting surface, ESD-safe nd resharpenable www.labem.pl 276 Side Cutters and Tip Cutters Series 2400 MagicSense D A B C D Tip cutter Straight long relieved head = length of cutting edges = head width = head thickness = head length Tip cutter Angled narrow head Tip cutter Angled wide head Side cutter Tapered head Visibility and accessibility Side cutter Oval head Robustness, high cutting capacity Side cutter - oval head 130 mm/5.118 Inch 70 g/2.47 oz. Model Cut Semi Flush SF 2412E Semi Flush SF Semi-flush Flush F Dimensions in mm/Inch A B C D This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity. Max. cutting capability in mm/Inch Diameter Hard wire Medium hardness Copper wire 12 11 6 19 0.5 1.01.6 .472 .433 .236 .748 .019 .039.062 - 2422E Semi Flush SF Flush F Super Full Flush FF Flush Flush F 12 11 6 19 .472 .433 .236 .748 2432E Super Full Flush FF Super full flush. 12 11 6 19 472 .433 .236 .748 1.01.6 .039.062 Super Full Flush FF - 0.81.6 .039.062 Wire quality, see P. 38 Optional: Safety device for wire scraps. Order suffix W", e.g. 2412W. www.labem.pl 277 Side Cutters and Tip Cutters Series 2400 MagicSense Side cutter - tapered head 127 mm/5.999 Inch 70 g/2.47 oz. Model Semi Flush SF Cut Flush F 2477E Super Full Flush FF Flush Dimensions in mm/Inch A B C D The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 12 11 6 19 1.0 1.3 .472 .472 .433 .236 .039 .051 Tip cutter - angled wide head 127 mm/5.118 Inch 70 g/2.47 oz. 30 Model Semi Flush SF Cut Dimensions in mm/Inch A B C D Flush F 2403E 9 11 6 19 Flush .354 .433 .236 .748 Flush FF SF SuperSemi Full Flush Flush F 2404E Flush The angled head provides for precise cuts at different working angles. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 1.0 1.6 .039 .062 Wide, robust head, fine cut 9 11 6 20 0.8 1.3 .354 .433 .236 .787 .031 .051 Super Full Flush FF Model same as 2403E, but with pointed rounded head www.labem.pl 278 Side Cutters and Tip Cutters Series 2400 MagicSense Tip cutter - angled narrow head 135 mm/5.315 Inch 72 g/2.54 oz. 45 Model Semi Flush SF Cut Flush F 2482E Super Full Flush FF Flush Dimensions in mm/Inch A B C D 6 11 6 26 0.6 1.2 .433 .236 1.024 .023 .047 Semi Flush SF 2475E Flush F Super Full Flush FF Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire .236 The angled head provides for precise cuts at different working angles. Suitable for working on printed-circuit boards, component connections, can be used in both 90 and 180 applications 4 11 6 22 0.4 0.6 .157 .433 .236 .866 .015 .023 FlushSuitable for fine cutting work on hybrid circuits of miniature components Tip cutter - straight long relieved head 140 mm/5.512 Inch 72 g/2.54 oz. Model Semi Flush SF Cut Flush F 2470E Flush Super Full Flush FF Dimensions in mm/Inch A B C D This head is suitable for horizontal and vertical cuts. The long tips facilitate cutting in hard-to-reach areas. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 4 11 6 29 0.4 0.6 .157 .433 .236 1.142 .015 .023 Safety device for wire scraps only possible on 2412EW, 2422EW, 2432EW, 2477EW, 2482EW models. www.labem.pl 279 Side Cutters and Tip Cutters Series 500 Medium Medium size, robust, precision cutters Wide range of head shapes Manufactured from high grade tool steel Cutting edges hardened to Rockwell 63-65 HRc Non reflecting surface, ESD safe and resharpenable www.labem.pl 280 Side Cutters and Tip Cutters Series 500 Medium D A B C D Tip cutter Straight long relieved head = length of cutting edges = head width = head thickness = head length Tip cutter Pointed relieved head Tip cutter Angled narrow head Tip cutter Angled wide head Visibility and accessibility Side cutter Tapered head Side cutter Oval head Robustness, high cutting capacity Side cutter - oval head 115 mm/4.527 Inch 67 g/2.36 oz. Model Cut Semi Flush SF 512N Flush F Semi-flush 512E Semi Flush SF Super Full Flush FF 522N FlushFF F Super Full Flush Semi Flush SF Super Full Flush FF Flush F Super Full Flush FF 11 6.5 19 0.5 1.0 1.6 .433 .256 .748 .019 .039 .062 Model same as 512N, but with burnished head 12 11 6.5 19 .472 .433 .256 .748 12 11 6.5 19 .472 .433 .256 .748 - 10 11 6.5 17 .472 .433 .256 .669 Flush 532N Super Full Flush FF 12 .472 1.0 1.6 .039 .062 Flush Semi Flush SF 599E Flush F Max. cutting capability in mm/Inch Diameter Hard wire Medium hardness Copper wire Semi Flush SFF Semi-flush Flush Dimensions in mm/Inch A B C D This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity. - 1.0 1.6 .039 .062 Short, robust head 12 11 6.5 19 .472 .433 .256 .748 - 0.8 1.6 .039 .062 Super full flush Wire quality, see P. 38 Optional: Safety device for wire scraps. Order suffix W", e.g. 512NW. www.labem.pl 281 Side Cutters and Tip Cutters Series 500 Medium Side cutter - tapered head 115 mm/4.527 Inch 67 g/2.36 oz. Model Semi Flush SF Cut Dimensions in mm/Inch A B C D Flush F The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 595E 12 11 6.5 19 Flush .472 .433 .256 .748 Super Full Flush FF Semi Flush SF 1.0 1.3 .039 .051 577E 10 11 6.5 17 Flush F .472 .433 .256 .669 Flush 1.0 1.3 .039 .051 Super Full Flush FF Tapered head Tapered, short head Tip cutter - angled wide head 110 mm/4.331 Inch 67 g/2.36 oz. 30 Model Semi Flush SF Cut Dimensions in mm/Inch A B C D Flush F The angled head provides for precise cuts at different working angles. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 503E 9 11 6.5 19 Flush .354 .433 .256 .748 Super Full Flush FF Semi Flush SF 1.0 1.6 .039 .062 504AE 9 11 6.5 19 Flush F .354 .433 .256 .748 Flush 0.8 1.3 .031 .051 Super Full Flush FF Wide, robust head Model same as 503E, but with pointed rounded head www.labem.pl 282 Tip cutter - angled narrow head 120 mm/4.724 Inch 68 g/2.40 oz. 35 Model Semi Flush SF Cut Flush F 555E Flush Super Full Flush FF Dimensions in mm/Inch A B C D Semi Flush SF Cut Flush F 572E Flush Super Full Flush FF 11 6.5 24 0.6 1.3 .236 .433 .256 .945 .023 .051 Dimensions in mm/Inch A B C D Semi Flush SF Cut Flush F 582E Flush Super Full Flush FF Semi Flush SF Flush F Cut 582EW Flush Super Full Flush FF Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 6 11 6.5 21 0.6 1.3 .433 .256 .827 .023 .051 Dimensions in mm/Inch A B C D Suitable for working on printed-circuit boards, component connections, can be used in both 90 and 180 applications. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 6 11 6.5 26 0.6 1.3 .236 .433 .256 1.024 .023 .051 115 mm/4.527 Inch 67 g/2.36 oz. 45 Model Relieved cutting edge for easy access. .236 115 mm/4.527 Inch 68 g/2.40 oz. 40 Model Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 6 115 mm/4.527 Inch 68 g/2.40 oz. 40 Model The angled head provides for precise cuts at different working angles. Narrow, robust head, suitable for working with high cutting force in confined areas. Dimensions in mm/Inch A B C D Model same as 582E, but with safety device for wire scraps. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 6 11 6.5 26 0.6 1.3 .236 .433 .256 1.024 .023 .051 www.labem.pl 283 Side Cutters and Tip Cutters Series 500 Medium Side Cutters and Tip Cutters Series 500 Medium Tip cutter - angled narrow head 115 mm/4.527 Inch 68 g/2.40 oz. 30 Model Semi Flush SF Cut Flush F 593AE Flush Super Full Flush FF Dimensions in mm/Inch A B C D Semi Flush SF Cut Flush F 575E Flush Super Full Flush FF Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 4 11 6.5 26 0.4 1.0 .157 .433 .256 1.024 .015 .039 110 mm/4.331 Inch 67 g/2.36 oz. 45 Model Ideal rework tool, suitable for cutting DIL contacts at front and rear and densely printed circuit boards. Dimensions in mm/Inch A B C D Suitable for fine cutting work on hybrid circuits or miniature components. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 4 11 6.5 22 0.2 0.6 .157 .433 .256 .866 .007 .023 Tip cutter - pointed relieved head Model Semi Flush SF Cut Semi Flush SF Flush F 592E Flush Flush F Super Full Flush FF 792E Super Full Flush FF Super full flush 115 mm/4.527 Inch 67 g/2.36 oz. This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. Dimensions in mm/Inch A B C D Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 12 11 6.5 19 0.4 0.8 .472 .433 .256 .748 .015 .031 12 11 6.5 19 0.4 0.6 .472 .433 .256 .748 .015 .023 www.labem.pl 284 Side Cutters and Tip Cutters Series 500 Medium Tip cutter - straight long relieved head 120 mm/4.724 Inch 67 g/2.36 oz. Model Semi Flush SF Cut Dimensions in mm/Inch A B C D Flush F 570E 4 11 6.5 29 Flush .157 .433 .256 1.142 Super Full Flush FF This head is suitable for horizontal and vertical cuts. The long tips facilitate cutting in hard-to-reach areas. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 0.6 1.2 .023 .047 For cutting at extreme tips Tip cutter - straight head for vertical use 120 mm/4.724 Inch 67 g/2.36 oz. Model Semi Flush SF Cut Flush F 573E Flush Super Full Flush FF Dimensions in mm/Inch A B C D Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 4 11 6.5 29 0.4 0.6 .157 .433 .256 1.142 .015 .023 www.labem.pl 285 Side Cutters and Tip Cutters Series 800 Maxi Maxi-sized cutter for general cutting applications in electronics Made from high grade tool steel, cutting edges hardened to Rockwell 63-65 HRc www.labem.pl 286 Cuts large wire diameters Non-reflecting surface, ESD-safe and resharpenable Side Cutters and Tip Cutters Series 800 Maxi D A B C D = length of cutting edges = head width = head thickness = head length Tip cutter Pointed relieved head Side cutter Tapered head Side cutter Oval head Visibility and accessibility Robustness, high cutting capacity Side cutter - oval head 120 mm/4.724 Inch 67 g /2.36 oz. Model Cut Semi Flush SF 812N Semi-flush Flush F Dimensions in mm/Inch A B C D Max. cutting capability in mm/Inch Diameter Hard wire Medium hardness Copper wire 15 .590 0.6 .023 13.5 .531 7.5 .295 21 .827 896E 15 13,5 7,5 21 Semi Flush SF Super Full Flush FF .590 .531 .295 .827 Semi Flush SF Semi-flush Flush F 822N Flush F Super Full Flush FF Flush This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity. 1.2 .047 1.8 .070 o 0,6 o 1,2 o 1,8 .023 .047 .070 Suitable for cutting hard wires, Kovar, connector pins 15 13.5 7.5 21 .590 .531 .295 .827 - 1.2 1.8 .047 .070 Super Full Flush FF Wire quality, see P. 38 www.labem.pl 287 Side Cutters and Tip Cutters Series 800 Maxi Side cutter - tapered head 120 mm/4.724 Inch 83 g/2.93 oz. Model Semi Flush SF Cut Flush F 886E Super Full Flush FF Flush Dimensions in mm/Inch A B C D The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 15 13.5 7.5 21 1.0 1.8 .590 .531 .295 .827 .039 .070 Tip cutter - pointed relieved head Model Semi Flush SF Cut Flush F 884E Super Full Flush FF Flush 120 mm/4.724 Inch 81 g/2.86 oz. This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. Dimensions in mm/Inch A B C D Max. cutting capability in mm/Inch Diameter Medium hardness Copper wire 15 13.5 7.5 21 0.8 1.6 .590 .531 .295 .827 .031 .062 www.labem.pl 288 Side Cutters and Tip Cutters Series 800 Maxi www.labem.pl 289 Side Cutters and Tip Cutters Tungsten-carbide cutters Medium sized precision cutters Wear resistant tungsten carbide edged cutting blades Manufactured from high grade tool steel Suitable for cutting hard and tough wires e.g. piano wire, nickel and diode leads Non reflecting surface, ESD safe and resharpenable www.labem.pl 290 Side Cutters and Tip Cutters Tungsten-carbide cutters D A B C D Tip cutter Pointed relieved head = length of cutting edges = head width = head thickness = head length Tip cutter Angled wide head Side cutter Tapered head Visibility and accessibility Side cutter Oval head Robustness, high cutting capacity Side cutter - oval head 115 mm/4.527 Inch 67 g/2.36 oz. Model Semi Flush SF Cut This is the most widely used head shape. Fits for all cutting applications where easy access is given It is robust and size for size offers the highest cutting capacity. Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A B C D Piano wire Hard wire Medium hardness Copper wire Flush F 622TX 8 9 6 15 Flush .315 .354 .236 .590 Super Full Flush FF 0.2 0.4 0.6 1.2 .007 .015 .023 .047 Miniature cutter 599T Semi Flush SF Semi Flush SFF Semi-flush Flush 12 11 6.5 19 0.6 0.8 1.0 1.5 .472 .433 .256 .748 .023 .031 .039 .059 599TF FlushFFF Super Full Flush Flush 12 11 6.5 19 0.6 0.8 1.0 1.5 .472 .433 .256 .748 .023 .031 .039 .059 Super Full Flush FF Wire quality, see P. 38 www.labem.pl 291 Side Cutters and Tip Cutters Tungsten-carbide cutters Side cutter - tapered head 115 mm/4.527 Inch 67 g/2.36 oz. Model Cut Semi Flush SF 595T Semi Flush SFSemi-flush The jaws of the cutter have straight edges and taper to a point. This head shape allows access to difficult to reach areas but reduces the cutting capacity in comparison to the same size oval head cutter. Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A B C D Piano wire Hard wire Medium hardness Copper wire 12 11 6.5 19 0.4 0.6 0.8 1.5 .472 .433 .256 .748 .015 .023 .031 .059 12 11 6.5 19 0.4 0.6 0.8 1.5 .472 .433 .256 .748 .015 .023 .031 .059 2476TX1Flush 11 11 6 19 F .433 .433 .236 .748 Semi Flush SF Flush 0.3 0.4 0.5 1.0 .011 .015 .019 .039 Flush F 595TF Flush F Super Full Flush FF Semi Flush SF Flush Super Full Flush FF Super Full Flush FF 576TX1 Flush F Flush Series 2400 MagicSense model (Length: 130 mm / 5.118 Inch) 11 11 6.5 19 0.3 0.4 0.5 1.0 .433 .433 .256 .748 .011 .015 .019 .039 Super Full Flush FF www.labem.pl 292 Tip cutter - pointed relieved head 115 mm/4.527 Inch 67 g/2.36 oz. Model Cut Semi Flush SF Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A B C D Piano wire Hard wire Medium hardness Copper wire 2476TX 11 11 6 19 0.1 Flush F .433 .433 .236 .748 .003 Semi Flush SF Flush Super Full Flush FF 576TX Flush F Flush This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. 0.2 0.3 1.0 .007 .011 .039 Series 2400 MagicSense model 11 11 6.5 19 0.1 0.2 0.3 1.0 .433 .433 .256 .748 .003 .007 .011 .039 Super Full Flush FF Tip cutter - angled wide head 110 mm/4.331 Inch 67 g/2.36 oz. 30 Model Cut The angled head provides for precise cuts at different working angles. Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A B C D Piano wire Hard wire Medium hardness Copper wire 503ET Semi Flush SF Semi Flush Semi-flush FlushSFF 9 11 6.5 19 0.4 0.6 0.8 1.2 .354 .433 .256 .748 .015 .023 .031 .047 503ETF Flush Super Full Flush FFF Flush 9 11 6.5 20 0.4 0.6 0.8 1.2 .354 .433 .256 .787 .015 .023 .031 .047 Super Full Flush FF www.labem.pl 293 Side Cutters and Tip Cutters Tungsten-carbide cutters Side Cutters and Tip Cutters Special applications D A B C D = length of cutting edges = head width = head thickness = head length Special applications - Special tool steel, ESD-safe 120 mm/4.724 Inch 100 g/3.53 oz. Model Cut Semi Flush SF 147A Semi-flush Flush F Dimensions in mm/Inch A B C Side cutter with compound action. Max. cutting capability in mm/Inch Diameter Copper wire 12 10.5 7.5 1.8 .472 .413 .295 .070 Super Full Flush FF 147AT 12 10.5 7.5 1.8 Semi Flush SF .472 .413 .295 .070 Semi-flush Flush F For cutting hard wires with minimal effort Model same as 147A, but with cutting edges made from tungsten carbide, model on request Super Full Flush FF 115 mm/4.527 Inch 79 g/2.79 oz. Model Semi Flush SF Cut Flush F 1884EPCM Flush Super Full Flush FF *Not available in North America 294 Side cutter, suitable for cutting printed-circuit boards. Max. cutting capability in mm/Inch Max. D Max. B 1.5 2.0 .059 .078 www.labem.pl Side Cutters and Tip Cutters Special applications 110 mm/4.331 Inch 48 g/1.69 oz. Side cutter, suitable for precision cuts on soft materials, e.g. small silicone tubes in medical applications, precision connector seals, miniature rubber seals, soft synthetic parts. Semi Flush SF Model Flush F Cut Super Full Flush FF 632NCF Super full flush Dimensions in mm/Inch A B C 9 9 6 .354 .354 .236 115 mm/4.527 Inch 67 g/2.36 oz. Model 599FO Dimensions in mm/Inch A B C D 12 11 6.5 19 .472 .433 .256 .748 115 mm/4.527 Inch 67 g/2.36 oz. Model Cut Side cutter, suitable for cutting Kevlar(R) silks. Side cutter with cutting edges made from tungsten carbide. Dimensions in mm/Inch A B C D Semi Flush SF 599TFO 12 10.5 6.5 19 Semi-flush .472 .413 .256 .748 Flush F Model same as 599FO, but with cutting edges made from tungsten carbide. Suitable for cutting Kevlar(R) silks, VectranTM-sheathed wires, optical fibres and small stainless wires Super Full Flush FF www.labem.pl 295 Side Cutters and Tip Cutters Pneumatic side cutters and tip cutters Pneumatic cutter Handy, light and precise E xtremely versatile thanks to a selection of different cutting heads Easily interchangeable cutting heads Suitable for cutting conventional components, soft metals or small plastic parts Pneumatic side cutters and tip cutters 130 mm/5.118 Inch 130 g/4.59 oz. Pneumatic-cutter housing Model Dimensions in mm/Inch Diameter D 1500 BSF 28 Cutting heads for 1500BSF Requires 4 - 6 bar oil-free clean compressed air A B C C B A = length of cutting edges B = head width C = head thickness Side cutter - oval head 35 g/1.16 oz. Model Cut Semi Flush SF 1512N Semi Flush SFSemi-flush Flush F 1522N Flush F Super Full Flush FF Flush Dimensions in mm/Inch A B C This is the standard head shape. It is used for all cutting jobs in easy-to-reach areas. The oval head provides for a high cutting capacity and is characterised by its robustness. Max. cutting capability in mm/Inch Diameter Copper wire 10 10.5 6.5 1.6 .394 .413 .256 .062 10 10.5 6.5 1.6 .394 .413 .256 .062 Super Full Flush FF Wire quality, see P. 38 296 www.labem.pl Side cutter - tapered head 35 g/1.16 oz. Model Semi Flush SF Cut Flush F 1522NA Flush Super Full Flush FF Dimensions in mm/Inch A B C The edges of the cutter head are straight and taper to a point, allowing access to hard to reach areas. Max. cutting capability in mm/Inch Diameter Copper wire 9 10.5 6.5 1.4 .354 .413 .256 .055 Side cutter - pointed relieved head 32 g/1.12 oz. This is the narrowest head shape. The underside is relieved and facilitates optimum access even to extremely hard-to-reach areas. Model Semi Flush SF Cut Flush F 1522NB Flush Super Full Flush FF Dimensions in mm/Inch A B C Max. cutting capability in mm/Inch Diameter Copper wire 9 10.5 6.5 1.2 .354 .413 .256 .047 Tip cutter - angled head 38 g/1.34 oz. 30 Model Semi Flush SF Flush F Cut 1503E Flush Super Full Flush FF Dimensions in mm/Inch A B C The angled head provides for precise cuts at different working angles. Max. cutting capability in mm/Inch Diameter Copper wire 12 10.5 6.5 1.2 .472 .413 .256 .047 www.labem.pl 297 Side Cutters and Tip Cutters Pneumatic side cutters and tip cutters Side Cutters and Tip Cutters Distance cutters Erem distance cutters are available with fixed and variable cutting lengths The tips are polished so as to prevent board damage For cutting wires to the right length and for fixing components D B C The protective stop screw D improves the performance of Erem distance cutters: -Clearance B larger than the wire diameter = cut wire is ejected. -Clearance B smaller than the wire diameter = cut wire is held. Adjust protective stop screw D so that cutting edge C does not hit the opposite side. This increases the lifetime of the cutting edge. A = jaw length E = width of tips F = cutting length Fixed cutting length (F) 120 mm/4.724 Inch 67 g/2.36 oz. Model Semi Flush SF Cut Flush F 530E06** Semi Flush SF Flush Super Full Flush FF Flush F 530E08 Semi Flush SF Flush Special tool steel ESD-safe Fixed cutting length (= F) Reduces mechanical shock on components Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A E F Copper wire 20 3 0.6 1.2 .787 .118 .023 .047 20 3 0.8 1.2 .787 .118 .031 .047 Cuts copper wire to a length of 0.6 mm/.023 Inch Cuts copper wire to a length of 0.8 mm/.031 Inch Super Full Flush FF Flush F 530E10 Semi Flush SF Flush 20 3 1.0 1.2 .787 .118 .039 .047 20 3 1.2 1.2 .787 .118 .047 .047 Cuts copper wire to a length of 1.0 mm/.039 Inch Super Full Flush FF Flush F 530E12* Semi Flush SF Flush Cuts copper wire to a length of 1.2 mm/.047 Inch Super Full Flush FF Flush F 530E13* Semi Flush SF Flush 20 3 1.3 1.2 .787 .118 .051 .047 20 3 1.5 1.2 .787 .118 .059 .047 Cuts copper wire to a length of 1.3 mm/.051 Inch Super Full Flush FF Flush F 530E15 Flush Cuts copper wire to a length of 1.5 mm/.059 Inch Super Full Flush FF Wire quality, see P. 38 298 *Not available in North America **Order as 539E060 in North America www.labem.pl Side Cutters and Tip Cutters Distance cutters Model Semi Flush SF Cut Flush F 530E18* Semi Flush SF Flush Super Full Flush FF Flush F 530E20* Flush Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A E F Copper wire 20 3 1.8 1.2 .787 .118 .070 .047 20 3 2.0 1.2 .787 .118 .078 .047 Cuts copper wire to a length of 1.8 mm/.070 Inc Cuts copper wire to a length of 2.0 mm/.078 Inch Super Full Flush FF 120 mm/4.724 Inch 67 g/2.36 oz. 45 Model Cut Semi Flush SF Flush F 549E Semi Flush SF Flush Super Full Flush FF Flush F 549E10* Semi Flush SF Flush Special tool steel ESD-safe Fixed length distance cutter Tapered 45 Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A E F Copper wire 20 3 1.5 1.2 .787 .118 .059 .047 20 3 1.0 1.2 .787 .118 .039 .047 Cuts wire to a length of 1.5 mm/.059 Inch Cuts wire to a length of 1.0 mm/.039 Inch Super Full Flush FF Flush F 549E12* Flush 20 3 1.2 1.2 .787 .118 .047 .047 Cuts wire to a length of 1.2 mm/.047 Inch Super Full Flush FF Variable cutting length (V) 120 mm/4.724 Inch 70 g/2.47 oz. Model Cut Semi Flush SF Flush F 530E15A* Flush Super Full Flush FF Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A E V Copper wire 20 4.5 1.2 - 6 1.2 .787 .177 .047 - .236 .047 115 mm/4.527 Inch 70 g/2.47 oz. Model Semi Flush SF Cut Flush F 573EB Flush Super Full Flush FF Special tool steel ESD-safe Variable cutting length (= V) With protective stop screw Variable cutting length from 1.2 mm to 6 mm/ 047 to .236 Inch Special tool steel ESD-safe Variable cutting length (= V) With protective stop screw Interchangeable plastic stop protects the printed-circuit board against damage Dimensions in mm/Inch Max. cutting capability in mm/Inch Diameter A E V Copper wire 20 4.5 0-5 0.8 .787 .177 0 - .197 .031 *Not available in North America Variable cutting length from 0 mm to 5 mm/ 0 to .197 Inch www.labem.pl 299 Pliers Good grip due to precise produced tips even at the thinnest part The choice of materials used for production of the pliers and a special hardening process is very important. www.labem.pl 300 Pliers www.labem.pl 301 Pliers Erem pliers, stripping pliers, forming pliers Gripping and bending pliers with standard and ergonomic handles MagicSense - moulded handle for increase comfort Wide variety of head shapes Special tool steel, non-reflecting surface, ESD-safe Internal patented Erem Magic Spring lange Lebensdauer Constant spring force Guarantees more than 1 million operations High precision screw joint Smooth jaw action with no play Smooth cutting operation with no jaw overlapping Precision ground jaws www.labem.pl 302 Pliers Ergonomically shaped handles for high comfort, better grip and added safety EMOS maximum opening stop limits the cutting-edge tips from opening more than 5 mm/.197 Inch. The limited extent to which the handles can open prevent user hand fatigue. ESD-safe The interchangeable foam-cushion handles are ESD-safe and are fitted as standard on all Erem cutters and pliers. 10 EMI/RF Sources: DOD/CECC conductive 100 static dissipating 10 5 antistatic 1012 insulating 1020 W/cm2 Erem cutters and pliers www.labem.pl 303 Pliers Erem Pliers Pliers for miniature and standard electronics Special tool steel, non-reflecting surface, ESD-safe High grade tool steel A = jaw length B = head width C = head thickness E = width of tips G = total height of both tips Round nose pliers 120 mm/4.724 Inch 62 g/2.18 oz. Round nose pliers with very precise, smooth jaws. Suitable for forming, bending, laying and feeding in wires. Model Shape Dimensions in mm/Inch A B C Eo 543E* 23 9 6.5 0.8 1.6 .905 .354 .256 .031 .062 G *Order as 543 in North America Needle nose pliers 120 mm/4.724 Inch 62 g/2.18 oz. Needle nose pliers with very precise, smooth and rounded jaws. Suitable for forming, bending, laying and feeding in wires. Model Shape Dimensions in mm/Inch A B C E 547 23 9 6.5 0.9 1.2 .905 .354 .256 .035 .047 G www.labem.pl 304 Pliers Erem pliers Flat nose pliers 120 mm/4.724 Inch 67 g/2.36 oz. Flat nose pliers with smooth jaws and precision-machined edges. Suitable for gripping flat workpieces. Model Shape Dimensions in mm/Inch A B C E 542E* 23 9 6.5 2.4 1.4 .905 .354 .256 .094 .055 G *Order as 542 in North America 125 mm/4.921 Inch 67 g/2.36 oz. Flat nose pliers with replaceable nylon jaws. Nylon jaws prevent nicking and scratching. Suitable for forming precious metals and component connections. Model Shape Dimensions in mm/Inch A B C E 531E* 23 9 6.5 5 3 .905 .354 .256 .197 .118 G *Order as 531 in North America Chain nose pliers 120 mm/4.724 Inch 67 g/2.36 oz. Chain nose pliers with narrow half-round jaws. For securely handling components. Model Shape Dimensions in mm/Inch A B C E 544E* 23 9 6.5 1 1.4 .905 .354 .256 .039 .055 G *Order as 544 in North America 120 mm/4.724 Inch 67 g/2.36 oz. Model Shape Dimensions in mm/Inch A B C E 544D 23 9 6.5 1 1.4 .905 .354 .256 .039 .055 G Inside-serrated jaws for secure handling www.labem.pl 305 Pliers Series 2400 MagicSense pliers Pliers for miniature and standard electronics Optimized ergonomically shaped handles for increased comfort Special tool steel, non-reflecting surface, ESD-safe A = jaw length B = head width C = head thickness E = width of tips G = total height of both tips Needle nose pliers 146 mm/5.748 Inch 72 g/2.54 oz. Needle nose pliers with very precise, smooth and rounded jaws. Model Shape Dimensions in mm/Inch A B C E 2411P 33.5 11 6 1 1.2 1.319 .433 .236 .039 .047 2411PD 35.5 11 6 1 1.2 1.319 .433 .236 .039 .047 G www.labem.pl 306 Model same as 2411P, but with insideserrated jaws for secure handling Pliers Series 2400 MagicSense pliers Flat nose pliers 146 mm/5.748 Inch 72 g/2.54 oz. Flat nose pliers with smooth jaws and precision-machined edges. Suitable for gripping flat workpieces. Model Shape Dimensions in mm/Inch A B C E 2442P 33.5 11 6 3.4 1.2 1.319 .433 .236 .139 .047 G Round nose pliers 146 mm/5.748 Inch 72 g/2.54 oz. Round nose pliers with very precise, smooth jaws. Suitable for bending wires. Model Shape Dimensions in mm/Inch A B C Eo 2443P 33.5 11 6 0.8 1.6 1.319 .433 .236 .031 .062 G www.labem.pl 307 Stripping pliers High precision stripping pliers Robust, high-precision tools for use in electronics and aeronautical engineering The required diameter is set by means of screws Screwdriver and key are included Interchangeable blades ESD-safe Special designs also available on request Front stripping 120 mm/4.724 Inch 75 g/2.65 oz. Suitable for all types of insulation and optical fibres. Integral side cutting blade. A = jaw length E = width of tips G = total height of both tips H = length of cutting blade Model Dimensions in mm/Inch A E G H 510AE 21 5 4 7 0.25 mm - 1.02 mm (AWG 30 - 18) .827 .197 .157 .276 .010 Inch - .040 Inch www.labem.pl 308 Wire diameter Stripping pliers High precision stripping pliers Front stripping 120 mm /4.724 Inch 80 g/2.82 oz Unique precision for damage-free stripping of fine wires. Suitable for all types of insulation, Teflon(R), Tefzel and optical fibres. A = jaw length E = width of tips F = depth of interchangeable blade G = total height of both tips H = length of cutting blade Model Dimensions in mm/Inch A E F G 552E 23 6.5 1 11 9 0.06 mm - 0.6 mm (AWG 42 - 24) .905 .256 .039 .433 .354 .002 Inch - .023 Inch H Wire diameter Side stripping 120 mm /4.724 Inch 80 g/2.82 oz Unique precision for damage-free stripping of fine wires. Suitable for all types of insulation, Teflon(R), Tefzel and optical fibres. A = jaw length E = width of tips F = depth of interchangeable blade G = total height of both tips H = length of cutting blade Model Dimensions in mm/Inch A E F G 552S 21 6.5 6.7 11 9 0.06 mm - 0.6 mm (AWG 42 - 24) .827 .256 .264 .433 .354 .002 Inch - .023 Inch H Wire diameter www.labem.pl 309 Forming pliers Forming pliers for passive components Safe bending, forming and preparation of component connections High grade tool steel Non-reflecting surface ESD-safe 120 mm/4.724 Inch 70 g/2.47 oz. Suitable for component connections, U-shape. A D E F Model 554E* = jaw length = height of tips = width of tips = length of forming tool Dimensions in mm/Inch A D E F Max. connection diameter Diodes Capacitors Resistors 13 10 10 10 0.65 mm 0.7 mm 1/2 W .512 .394 .394 .394 .025 Inch .027 Inch *Order as 554 in North America 120 mm/4.724 Inch 70 g/2.47 oz. Suitable for component connections, U-shape, axial forming. Narrow head shape. A D E F Model 554A Dimensions in mm/Inch A D E F Max. connection diameter Diodes Capacitors 23 5.6 2.5 4.5 0.65 mm 0.7 mm1/2 W .905 .220 .098 .177 .025 Inch .027 Inch www.labem.pl 310 = jaw length = height of tips = width of tips = length of forming tool Resistors Forming pliers Forming pliers for passive components 120 mm/4.724 Inch 70 g/2.47 oz. Suitable for secure assembly. Forms the two opposing Us in one operation. A D E F Model 554TX Dimensions in mm/Inch A D E F Max. connection diameter Diodes Capacitors 20 6.5 6.5 4 0.65 mm 0.7 mm1/2 W .787 .256 .256 .157 .025 Inch .027 Inch 120 mm/4.724 Inch 67 g/2.36 oz. 50788 Max. connection diameter Diodes Capacitors 23 4 3 0.65 mm 0.7 mm1/2 W .905 .157 .118 .025 Inch .027 Inch Resistors For cutting and bending different types of components with two outputs. A D E F 50789Z = jaw length = height of tips = width of tips = length of forming tool Dimensions in mm/Inch A D E F 120 mm/4.724 Inch 67 g/2.36 oz. Model Resistors For cutting and bending components into two operations to a predefined length. A D E F Model = jaw length = height of tips = width of tips = length of forming tool = jaw length = height of tips = width of tips = length of forming tool Dimensions in mm/Inch A D E F Max. connection diameter Diodes Capacitors Resistors 23 3.3 3.5 0.65 mm 0.7 mm 1/2 W .905 .130 .138 .025 Inch .027 Inch www.labem.pl 311 Forming pliers High precision forming tools for active components Safe bending, forming and preparation of component connections, specially for integrated components and power transistors High grade tool steel Non-reflecting surface ESD-safe 120 mm/4.724 Inch 85 g/3.00 oz. Model 500103A* Dimensions in mm/Inch K max. M 15 3 - 12 .590 .118 - .472 120 mm/4.724 Inch 85 g/3.00 oz. Model 500210E *Not available in North America 312 Suitable for bending flat components, contacts, power transistors, Triac connections to a right angle. Suitable for cutting and bending Series TO components, diodes and mechanical parts to a right angle. Easily adjustable with interchangeable cutting edges. Dimensions in mm/Inch K max. M 11 3.8 - 15 .433 .149 - .590 www.labem.pl Forming pliers High precision forming tools for active components 120 mm/4.724 Inch 85 g/3.00 oz. Model 500104A 3 connections, suitable for bending components of Series TO 126, 218, 220 and power transistors through 90 in two rows. Adjusted by means of a screw. Dimensions in mm/Inch K max. M I 13 3.5 - 15 2.54 .512 .138 - .590 .100 High precision forming pliers for Flat Packs, Quads 120 mm /4.724 Inch 100 g/3.53 oz. Suitable for bending flat components, contacts, power transistors, Triac connections to a right angle. Model Dimensions in mm/Inch A K max. 80013C 17 13 2.8 .669 .512 .110 M High precision forming pliers for DIL pins 120 mm/4.724 Inch 98 g/3.46 oz. Suitable for cutting and bending DIL pins through 90 in one operation. Up to max. 20 DIL pins. Model Dimensions in mm/Inch E F 809IC 25 0.9 .984 .035 or www.labem.pl 313 Special tools IC and SMD tools, Fibre optic tools, Vacuum micromanipulator IC and SMD tools with precise fine adjustment for inserting, extracting, straightening and cutting IC and SMD components High-precision tools for optical fibres for professional stripping, suitable for cutting Kevlar(R) silks, VectranTM-sheathed wires, etc. Vacuum system for precise handling of tiny SMD components and silicon wafers, suitable for assembly and laboratory work www.labem.pl 314 Special tools www.labem.pl 315 IC and SMD tools IC and SMD tools IC and SMD tools for inserting, extracting, straightening and cutting IC and SMD components Non-reflecting surface ESD-safer Inserting and extracting 120 mm/4.724 Inch One screwdriver included for fine adjustments. Model Dimensions in mm/Inch E 505C 505C 505BGC 505BG 20 505BGC 505BG Pins: .787 36 1.417 36 Width: 1.417 Straightening 130 mm/5.118 Inch 120 g/4.24 oz. Practical straightening tool, suitable for straightening contacts, DIL/IC connections. Up to 16 connections possible. Model Dimensions in mm/Inch A E G 808G 23 42 1 .905 1.653 .039 www.labem.pl 316 Cutting 110 mm/4.331 Inch 48 g/1.69 oz. Model Semi Flush SF Cut High-precision tip cutter. For connections of SMD micro-packages up to 0.25 mm/ .010 Inch, also for pitches smaller than 1/20". For pitches below 0.5 mm/.019 Inch, you will need the 670EPF model. Please send component when ordering. Dimensions in mm/Inch A D E Flush F 670EP Flush 10 3 2 .394 .118 .079 Super Full Flush FF 115 mm/4.527 Inch 67 g/2.36 oz. Model Semi Flush SF Cut High-precision tip cutter, bent. Practical rework tool. For cutting DIL contacts directly on the component. Ideal for densely printed boards. Dimensions in mm/Inch A D Flush F 593AE Flush 20 4 .787 .157 Super Full Flush FF Kit for SMD work Model For SMD assembly and repair applications. 6-piece tool kit with monitored discharging ESD handles. Special tool steel, non-reflecting surface, resharpenable (cutter). High-quality precision tweezers, non-magnetic. In an ESD-safe plastic case. Description 3900KC Kit for SMD work contents: 51SA Precision tweezers with very pointed tips, bent 30, relieved; length 115 mm/4.527 Inch 102ACA SMD tweezers with angled tips and blunted edges, suitable for vertical working with small components; length 115 mm/4.527 Inch 103ACA SMD tweezers with angled tips and blunted edges for vertical working with small components; length 115 mm/4.527 Inch 150SAMBSMD tweezers with bent tips 40, serrated finger grips for gripping small cylindrical parts, dia. 1.2 - 2.5 mm/.047 - .108 Inch; length 120 mm/4.724 Inch 150SAMFSMD tweezers with straight tips and serrated finger grips for gripping small cylindrical parts, dia. 1.2 - 2.5 mm/.047 - .108 Inch; length 120 mm/4.724 Inch 670EP High-precision tip cutter for connections of SMD micro-packages up to 0.25 mm/.010 Inch www.labem.pl 317 Special tools IC and SMD tools Fibre optic tools High precision tools for optical fibres Suitable for simple and precise stripping of optical fibres High grade tool steel Non-reflecting surface ESD-safe Side stripping 120 mm /4.724 Inch 80 g/2.82 oz. Suitable for all types of insulation, Teflon(R), Tefzel and optical fibres. Unlimited stripping length thanks to side stripping. Diameter is set by means of two screws. Replaceable cutting blade. A = jaw length E = width of tips F = depth of interchangeable blades G = total height of both tips H = length of cutting blade Model Dimensions in mm/Inch A E F G 552S 21 6.5 6.7 11 9 0.06 mm - 0.60 mm (AWG 42 - 24) .827 .256 .264 .433 .354 .002 Inch - .023 Inch H Wire diameter Holding / gripping 120 mm/4.724 Inch 20 g/0.71 oz. Model Stainless-steel tweezers with synthetic tips (PPS). Non-reflecting surface. Non-magnetic. Description 249SAPrecision tweezers with pointed synthetic tips (PPS) to protect optical fibres and serrated finger grips for secure handling. Volume resistance 16 /cm. Heat-resistant up to 250C (480F). Resistant to acids and molten soldering tin. Water-repellent. www.labem.pl 318 Special tools High precision tools for optical fibres Cutting 115 mm/4.527 Inch 67 g/2.36 oz. A B C B Side cutter, suitable for cutting Kevlar(R) silks, VectranTM-sheathed wires, optical fibres and small stainless wires. A = length of cutting edges B = head width C = head thickness Model Dimensions in mm/Inch A B C 599FO 15 10.5 6.5 .590 .413 .256 115 mm/4.527 Inch 67 g/2.36 oz. Model Cut Semi Flush SF 599TFO Semi-flush Flush F Side cutter, suitable for cutting Kevlar(R) silks, VectranTM-sheathed wires, optical fibres and small stainless wires. Dimensions in mm/Inch A B C 15 10.5 6.5 .590 .413 .256 Super Full Flush FF www.labem.pl 319 Vacuum micromanipulator Vacuum micromanipulator Professional vacuum system for precise handling of tiny SMD components and silicon wafers Suitable for assembly and laboratory work Advantages of the vacuum micromanipulator: Easy picking up of components or silicone wafers Immediate set-down/release of parts Full 360 rotating system Direct axial switch for vacuum Ergonomic shape reduces hand and wrist fatigue ESD-safe 3200 2040Z / 2044Z / 2041Z 3000 ESD 2052E 3740 (optional) 3231 3303 / 3305Z / 3310Z / 3315 / 3330 3232 2040Z / 2044Z / 2041Z 2052E Handle 140 mm/5.512 Inch 35 g/1.23 oz. Model 3000ESD* *Not available in North America 320 Ergonomic handle with axial switch, serrated finger grip for secure handling. Dimensions in mm/Inch Dia. 10 mm Handle .394 Inch www.labem.pl Special tools Inserts for 3000ESD housing Adapters Model Description 3200* 25 mm 15 g .984 Inch 0.53 oz. 3231* 5 mm 5g .197 Inch 0.17 oz. 3232* 15 mm total 3g .590 Inch 0.10 oz. Stainless-steel adapter, rotatable through 360, straight suction tip for direct working or as an adapter for suction tips or suction cups Adapter fix, for working with Series 3300 suction tips Adapter fix, for direct working or as an adapter for suction tips 20442/20412 or suction cup 2052E Suction tips, straight Polyethylene suction tip. For working with 3200 or 3232 adapter. Model Outside diameter Inside diameter 2044Z* 1.3 mm 0.9 mm .051 Inch .035 Inch 2041Z* 2.0 mm 1.4 mm .078 Inch .015 Inch *Not available in North America www.labem.pl 321 Vacuum micromanipulator Inserts for 3000ESD housing Suction needles Stainless-steel suction needle. Bent 45. For working with 3200 or 3232 adapter. Model Outside diameter Inside diameter 3303* 0.30 mm 0.16 mm .011 Inch .006 Inch 3305Z* 0.50 mm 0.25 mm .020 Inch .019 Inch 3310Z* 1.0 mm 0.65 mm .039 Inch .025 Inch Suction cups Silicone suction cup. For working with 3200 or 3232 adapter. Model 2052E* *Not available in North America 322 Diameter 4.5 mm .177 Inch www.labem.pl Special tools Inserts for 3000ESD housing Accessories Model Description 3714Z* Diaphragm pump 230 V, 5 l/min, max. vacuum -250 mbar 3008ESD* Tube, flexible, 1.8 m/70.866 Inch, ESD-safe 3717* Filter for tube 3008ESD 3740* Table holder for 3000ESD (without accessories) Vacuum kit Complete accessories for easy pick-up and immediate set-down of components or silicon wafers. Set for laboratory work. In an ESD-safe plastic case. Model Description 3000KCESD* Vacuum kit contents: 3000ESD Handle 3200 Adapter, rotatable through 360 3231 Adapter fix 3305Z, 3310Z, 3315 Suction needles 2052E Suction cup, dia. 4.5 mm / .177 Inch KDS 260L Suction cup, dia. 9.5 mm / .374 Inch 3740 Table holder 3714Z Diaphragm pump 230 V 3008ESD Tube, flexible 3717 Filter 102ACASMD tweezers, 115 mm / 4.527 Inch, with bent tips and blunted edges. For vertical working with small components. Stainless steel, non-reflecting surface, non-magnetic. *Not available in North America www.labem.pl 323 Kits Swiss high precision tools in a kit Large selection of tool kits with high-quality precision tools Optimum combination of suitable precision tools for many a pplications, e.g. in microelectronics, medicine or biology Precision tools in an ESD-safe plastic case with padded foam inlay www.labem.pl 324 Kits www.labem.pl 325 Kits Swiss high precision tools in a kit Erem Toolset Universal For use in electronics assembly, the watchmaking industry, medicine or dentistry. 11-piece tool kit with monitored discharging ESD handles. Special tool steel, non-reflecting surface, resharpenable (cutter). High-quality precision tweezers, non-magnetic, for assembly work in electronics and light engineering. Precision screwdriver with hardened, durable tips, for precision working in confined areas. In an ESD-safe plastic case. Model Description 3600KU* Erem Toolset Universal contents: XP600Precision-screwdriver set for electronics 4 regular screwdrivers: 1.5 x 60 mm/.059 x 2.362 Inch, 2.0 x 60 mm/.078 x 2.362 Inch, 2.5 x 60 mm/.098 x 2.362 Inch, 3.0 x 60 mm/.118 x 2.362 Inch, 2 Phillips screwdrivers No. 0 and No. 00 2412E 2442P 622NB Series 2400 MagicSense side cutter, semi-flush, oval head Robust head for universal use, hard wire 0.5 mm/.019 Inch, medium hardness 1.0 mm/.039 Inch, Cu 1.6 mm/.066 Inch Series 2400 MagicSense flat nose pliersWith smooth jaws, precision-machined edges, e.g. for gripping flat workpieces Tip cutter, flush, relieved, long, fine head Miniature cutter for excellent access, flush, medium hardness 0.6 mm/.023 Inch, Cu 0.8 mm/.031 Inch AASA Precision tweezers Pointed tips straight, special stainless steel, non-magnetic 2ASASL Precision tweezersWith flat rounded tips, tip widths 2 mm/.078 Inch, special stainless steel, non-magnetic *Not available in North America 326 www.labem.pl Kits Swiss high precision tools in a kit Erem Toolset SMD For SMD assembly and repair applications. 6-piece tool kit with monitored discharging ESD handles. Special tool steel, non-reflecting surface, resharpenable (cutter). High-quality precision tweezers, non-magnetic, for SMD work. In an ESD-safe plastic case. Model Description 3900KC Erem Toolset SMD contents: 51SA Precision tweezers With very pointed tips, angled 30, relieved 102ACA SMD precision tweezers Tip width 0.5 mm/.019 Inch, angled 45 103ACA SMD precision tweezers Tip width 1 mm/.039 Inch, angled 45 150SAMB SMD precision tweezersWith round tips, dia. 1.2 mm - 2.5 mm/.047 Inch - .098 Inch, angled 40, serrated finger grips for gripping cylindrical components 150SAMF SMD precision tweezersWith round, very narrow tips, dia. 1.2 mm - 2.5 mm/ .047 Inch - .098 Inch, serrated finger grips 670EPMiniature tip cutter, flush, relieved head *Not available in North America For SMD and micro-package contacts up to 0.25 mm/.010 Inch www.labem.pl 327 Kits Swiss high precision tools in a kit Erem 2400 MagicSense For use in electronics, PCB assembly, wire and connection handling. 3-piece tool kit. MagicSense moulded handle with soft touch for increased comfort and grip. Induction-hardened cutting edges in Rockwell hardness 64-65 HRc, high grade of hardness for exceptionally long life. High grade tool steel, non-reflecting surface, ESD-safe, resharpenable. In an ESD-safe plastic case. Model Description 2400KMS* Erem 2400 MagicSense contents: 2412E Series 2400 MagicSense side cutter, Robust head for universal use, hard wire 0.5 mm/.019 Inch, semi-flush, oval head medium hardness 1.0 mm/.039 Inch, Cu 1.6 mm/.062 Inch 2482E Series 2400 MagicSense tip cutter, Angled 45, ideally suitable for working on printed-circuit flush, narrow headboards, component connections, can be used in both 90 and 180 applications 2411P Series 2400 MagicSense needle nose pliers Smooth, rounded jaws *Not available in North America 328 www.labem.pl Kits Swiss high precision tweezers in a kit Erem Tweezers Prime Selection High-quality precision tweezers for use in microelectronics, light engineering, laboratory work, biology and medicine. 3-piece tweezer kit. Special stainless steel, non-magnetic, nonrusting, acid-proof. In an ESD-safe plastic case. Model Description 3300TPS* Erem Tweezers Prime Selection contents: 3SA Precision tweezers 2ASA Precision tweezersWith flat rounded tips for gripping smaller components, tip width 2 mm/.078 Inch 7SA Precision tweezers *Not available in North America With pointed tips straight Curved, relieved, with pointed tips www.labem.pl 329 Kits Swiss high precision tweezers in a kit Erem SMD Tweezers - Universal High-quality precision tweezers for SMD work with assorted shapes of chip, SOT, MELFs, mini MELFs, flatpacks. 4-piece tweezer kit. Blunted edges prevent PCB damage. Special stainless steel, non-magnetic, non-rusting, acid-proof. In an ESD-safe plastic case. Model Description 3400TSMDU* Erem SMD Tweezers - Universal contents: 103ACA SMD precision tweezers 150SAMF SMD precision tweezersWith round tips, angled 40, serrated finger grips for secure handling, for gripping cylindrical components 102ACAX SMD precision tweezersWith angled pointed tips for vertical use, reverse clamping action for easy handling 7SA Precision tweezers *Not available in North America 330 Angled 45, tip width 0.5 mm/.019 Inch Curved, relieved, with pointed tips www.labem.pl Kits Swiss high precision tweezers in a kit Erem Premium Tweezers High-quality precision tweezers for microelectronics, light engineering and SMD work. 5-piece tweezer kit. Blunted edges prevent PCB damage. Special stainless steel, non-magnetic, non-rusting, acid-proof. In an ESD-safe plastic case. Model Description 3500TP* Erem Premium Tweezers contents: 3SA Precision tweezers 2ASA Precision tweezersWith flat rounded tips for gripping small components, tip width 2 mm/.078 Inch 7SA Precision tweezers Curved, relieved, with pointed tips 102ACA SMD precision tweezers Tip width 0.5 mm/.019 Inch, angled 45 15AGW Cutting tweezersWith narrow oblique head, for soft wires, hardened cutting edges for increased service life *Not available in North America With pointed tips straight www.labem.pl 331 Kits Swiss high precision tools in a kit Vacuum kit Complete accessories for easy pick-up and immediate set-down of components or silicon wafers. Set for laboratory work. In an ESD-safe plastic case. Model Description 3000KCESD* Vacuum kit contents: 3000ESD HandleSize: 400 x 320 x 150 mm/15.748 x 12.598 x 5.905 Inch, 2.2 kg, with axial switch, ergonomic, serrated finger grip 3200 Adapter, rotatable through 360Stainless-steel adapter, rotatable through 360, straight suction tip for direct working or as an adapter for section tips or suction cups 3231 Adapter fix For working with 3300 suction tips 3305Z, 3310Z, 3315Suction needles, 45, stainless steel For working 3231 adapter 2052E Suction cup, dia. 4.5 mm/.177 Inch, silicone For working with 3200 or 3232 adapter KDS 260L Suction cup, dia. 9.5 mm/.374 Inch 3740 Table holder 3714Z Diaphragm pump 230 V, 5 l/min, max. vacuum -250 mbar 3008ESD Tube, flexible, 1.8 m, ESD-safe 3717 Filter for tube 3008ESD 102ACA SMD tweezers115 mm/4.527 Inch, with curved tips and blunted edges, for vertical working with small components, stainless steel, non-reflecting surface, non-magnetic *Not available in North America 332 www.labem.pl Kits www.labem.pl 333 Knives, Shearcutters, Screwdriver, Kits www.labem.pl 334 www.labem.pl 335 Knives & Blades Knives Order No. Description Size Inch XN100 Knife, Light duty for soft material 5 13/16 148 XN200 Knife, Medium duty for hard material 5 3/4 146 XN210 Knife, Heavy duty plastic handle for coars jobs 5 7/16 137 XNS100 Light and medium duty knife set contains 10 assorted blades: XN100, XN200, XNB103 (2 pcs.), XNB105 (2 pcs.), XNB101, XNB203, XNB205 (2 pcs.), XNB201 Blades for XN100 Order No. Description XNB101 Blade, Standard XNB103 XNB103B Blade, Fine pointed Blade, Fine pointed XNB105 Blade, Stencil Pack quantity 5 5 100 5 Blades for XN200 and XN210 Order No. Description Pack quantity XNB201 Blade, Chisel 5 XNB203 Blade, General purpose 5 XNB205 Blade, Pointed 5 www.labem.pl 336 mm Shearcutters & Pliers Shearcutter - general purpose Cutting copper wire to 0,8 mm diameter Order No. Description Size Inch mm 170M Shearcutter, red handles 5 127 175M Shearcutter with safety clips, red handles 5 127 Sheet metal Snip Order No. Description Size Inch 86NCG Snip, electronic 6 1/ 2 mm 165 Wire Stripper & Cutters Order No. Description Size Inch mm 100XV Wire Stripper & Cutter, adjustable 5 127 101SNV Wire Stripper & Cutter, spring-opening 5 127 www.labem.pl 337 Screwdriver & Nutdriver Sets Mini Screwdriver Set with Slotted/Phillips Screwdrivers Order No. Description M60 Mini Screwdriver Set with Slotted/Phillips Screwdrivers (7 pcs.) Offset Ratches Screwdriver Set Order No. Description XL75 Offset Ratches Screwdriver Set www.labem.pl 338 Screwdriver Set for slotted Screws - Inch Size Order No. Description Length Colour Inch mm PS88 Screwdriver Set for Slotted Screws - Inch Size consists of: P3321* Screwdriver, Midget 3/32" (2,38 mm) 3 1/ 2 89 green P181* Screwdriver, Midget 1/8" (3,18 mm) 3 1/ 2 89 red P5321* Screwdriver, Midget 5/32" (3,97 mm) 3 1/ 2 89 black P3161* Screwdriver, Midget 3/16" (4,76 mm) 3 1/ 2 89 orange P141 Screwdriver, Midget 1/8" (3,18 mm) 3 1/ 2 89 amber P0* Screwdriver, Philips Nr. 0 3 1/ 2 89 blue P1* Screwdriver, Philips Nr. 1 3 1/ 2 89 brown P2* Screwdriver, Philips Nr. 2 3 1/ 2 89 amber TA2* Torque amplifier handle black Screwdriver Set for Hex Socket Screws - Inch Size Order No. Description Length Inch mm PS89 Screwdriver Set for Hex Socket Screws - Inch Size consists of: P18* Screwdriver, Midget, Hex, 0,028" (0,71 mm) 3 1/ 2 89 P19* Screwdriver, Midget, Hex, 0,035" (0,89 mm) 3 1/ 2 89 P20* Screwdriver, Midget, Hex, 0,050" (1,27 mm) 3 1/ 2 89 P21* Screwdriver, Midget, Hex, 1/16" (1,59 mm) 3 1/ 2 89 P22* Screwdriver, Midget, Hex, 5/64" (1,98 mm) 3 1/ 2 89 P23* Screwdriver, Midget, Hex, 3/32" (2,38 mm) 3 1/ 2 89 P764* Screwdriver, Midget, Hex, 7/64" (2,78 mm) 3 1/ 2 89 P24* Screwdriver, Midget, Hex, 1/8" (3,18 mm) 3 1/ 2 89 TA2* Torque amplifier handle, black *Discontinued www.labem.pl 339 Screwdriver & Nutdriver Sets Compact Convertible Hex Socket Srewdriver Set - Metric Size Order No. Description Length Inch mm PS90MM Compact Convertible Hex Socket Srewdriver Set - Metric Size consists of: P71* Screwdriver, Midget, Hex, 1,27 mm 3 1/ 2 89 P72* Screwdriver, Midget, Hex, 1,5 mm 3 1/ 2 89 P73* Screwdriver, Midget, Hex, 0,89 mm 3 1/ 2 89 P74* Screwdriver, Midget, Hex, 2,5 mm 3 1/ 2 89 P75* Screwdriver, Midget, Hex, 3 mm 3 1/ 2 89 P76* Screwdriver, Midget, Hex, 4 mm 3 1/ 2 89 P77* Screwdriver, Midget, Hex, 5 mm 3 1/ 2 89 P78* Screwdriver, Midget, Hex, 0,89 mm 3 1/ 2 89 TA2* Torque amplifier handle, black Nutdriver Set - Inch Sizes Order No. Description Length Inch mm PS120 Nutdriver Set - Inch Size consists of: P3* Nutdriver, Midget, 3/32" (2,38 mm) 3 1/2 89 P4* Nutdriver, Midget, 1/18" (3,18 mm) 3 1/2 89 P5* Nutdriver, Midget, 5/32" (3,97 mm) 3 1/2 89 P6* Nutdriver, Midget, 3/16" (4,76 mm) 3 1/2 89 P7* Nutdriver, Midget, 7/32" (5,56 mm) 3 1/2 89 P8* Nutdriver, Midget, 1/4" (6,35 mm) 3 1/2 89 P9* Nutdriver, Midget, 9/32" (7,14 mm) 3 1/2 89 P10* Nutdriver, Midget, 5/16" (7,94 mm) 3 1/2 89 P11* Nutdriver, Midget, 11/32" (8,73 mm) 3 1/2 89 P12* Nutdriver, Midget, 3/8" (9,53 mm) 3 1/2 89 TA2* Torque amplifier handle *Discontinued 340 www.labem.pl Colour blue red amber black brown rred orange amber green blue black Compact Convertible Nutdriver Set - Metric Sizes Order No. Description Length Inch mm PS121MM Compact Convertible Nutdriver Set - Metric Size consists of: P3MM* Nutdriver, Midget, 3 mm (0,118") 3 1/ 2 89 P35MM* Nutdriver, Midget, 3,5 mm (0,138") 3 1/ 2 89 P4MM* Nutdriver, Midget, 4 mm (0,157") 3 1/ 2 89 P45MM* Nutdriver, Midget, 4,5 mm (0,177") 3 1/ 2 89 P5MM* Nutdriver, Midget, 5 mm (0,197") 3 1/ 2 89 P55MM* Nutdriver, Midget, 5,5 mm (0,217") 3 1/ 2 89 P6MM* Nutdriver, Midget, 6 mm (0,236") 3 1/ 2 89 P7MM* Nutdriver, Midget, 7 mm (0,276") 3 1/ 2 89 P8MM Nutdriver, Midget, 8 mm (0,315") 3 1/ 2 89 P10MM Nutdriver, Midget, 10 mm (0,394") 3 1/ 2 89 TA2* Torque amplifier handle, black *Discontinued www.labem.pl 341 Series 99 Service Kits & Sets Order No. Description 99MP consists of: 991X 994 99X5 99820 99821 99822 996 997 998 998M 999 9910 9911 9912 9914 9916 9920 9921 9922 9923 99764 9924 99964 9925 9926 9961 9962 9963 9964 9965 9966 9967 9968 9969 99125 99811 99250 99312 9938 Multi-purpose Tool Kit, Roll Kit Regular Handle T-Handle Extension, 4" Blade, Screwdriver, Phillips No. 0 Blade, Screwdriver, Phillips No. 1 Blade, Screwdriver, Phillips No. 2 Blade, Nutdriver, 3/16" Blade, Nutdriver, 7/32" Blade, Nutdriver, 1/4" Blade, Nutdriver, magnetic, 1/4" Blade, Nutdriver, 9/32" Blade, Nutdriver, 5/16" Blade, Nutdriver, 11/32" Blade, Nutdriver, 3/8" Blade, Nutdriver, 7/16" Blade, Nutdriver, 1/2" Blade, Screwdriver, Allen Hex Type, 0,050" Blade, Screwdriver, Allen Hex Type, 1/16" Blade, Screwdriver, Allen Hex Type, 5/64" Blade, Screwdriver, Allen Hex Type, 3/32" Blade, Screwdriver, Allen Hex Type, 7/64" Blade, Screwdriver, Allen Hex Type, 1/8" Blade, Screwdriver, Allen Hex Type, 9/64" Blade, Screwdriver, Allen Hex Type, 5/32" Blade, Screwdriver, Allen Hex Type, 3/16" Blade, Bristol 6-flute Multiple Spline, 0,048" Blade, Bristol 6-flute Multiple Spline, 0,060" Blade, Bristol 4-flute Multiple Spline, 0,069" Blade, Bristol 6-flute Multiple Spline, 0,072" Blade, Bristol 4-flute Multiple Spline, 0,076" Blade, Bristol 6-flute Multiple Spline, 0,096" Blade, Bristol 6-flute Multiple Spline, 0,111" Blade, Bristol 6-flute Multiple Spline, 0,145" Blade, Bristol 6-flute Multiple Spline, 0,183" Blade, Screwdriver, Slotted, 1/8" Blade, Screwdriver, Slotted, 3/16" Blade, Screwdriver, Slotted, 1/4" Blade, Screwdriver, Slotted, 5/16" Reamer, 1/8" x 3/8" www.labem.pl 342 Order No. Description 99SPC consists of: E1 X1 T1 R1 99820 99821 9910XTD 9915XTD 996 998 99811 Personal Computer Repair Kit Order No. Description 99PS40 consists of: 991X 99X5 9920 9921 9922 9923 99764 9924 99964 9925 9926 Allen Hex Type Screwdriver Set - Inch Size IC-Inserter IC-Extractor Tweezer Gripping Tool Blade, Screwdriver, Phillips No. 0 Blade, Screwdriver, Phillips No. 1 Torx Blade No. 10 Torx Blade No. 15 Blade, Nutdriver, 3/16" Blade, Nutdriver, 1/4" Blade, Screwdriver, Slotted, 3/16" Regular Handle Extension 4" Blade, Screwdriver, Allen Hex Type, 0,050" Blade, Screwdriver, Allen Hex Type, 1/16" Blade, Screwdriver, Allen Hex Type, 5/64" Blade, Screwdriver, Allen Hex Type, 3/32" Blade, Screwdriver, Allen Hex Type, 7/64" Blade, Screwdriver, Allen Hex Type, 1/8" Blade, Screwdriver, Allen Hex Type, 9/64" Blade, Screwdriver, Allen Hex Type, 5/32" Blade, Screwdriver, Allen Hex Type, 3/16" www.labem.pl 343 Series 99 Service Kits & Sets Order No. Description 99PS41MM consists of: 991X 99X5 9971MM 9972MM 9973MM 9974MM 9975MM 9976MM 9977MM Allen Hex Type Screwdriver Set - Metric Size Order No. Description 99PS40BP consists of: 991X 99X5 9920BP 9921BP 9922BP 9923BP 99764BP 9924BP 99964BP 9925BP 9926BP Ballpoint Allen Hex Socket Type Screwdriver Set - Inch Regular Handle Extension 4" Blade, Screwdriver, Allen Hex Type, 1,27 mm Blade, Screwdriver, Allen Hex Type, 1,5 mm Blade, Screwdriver, Allen Hex Type, 2 mm Blade, Screwdriver, Allen Hex Type, 2,5 mm Blade, Screwdriver, Allen Hex Type, 3 mm Blade, Screwdriver, Allen Hex Type, 4 mm Blade, Screwdriver, Allen Hex Type, 5 mm Extension 4" Verlangerung, 102 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 0,05" Blade, Screwdriver, Allen Hex Type, Ballpoint, 1/16" Blade, Screwdriver, Allen Hex Type, Ballpoint, 5/64" Blade, Screwdriver, Allen Hex Type, Ballpoint, 3/32" Blade, Screwdriver, Allen Hex Type, Ballpoint, 7/64" Blade, Screwdriver, Allen Hex Type, Ballpoint, 1/8" Blade, Screwdriver, Allen Hex Type, Ballpoint, 9/64" Blade, Screwdriver, Allen Hex Type, Ballpoint, 5/32" Blade, Screwdriver, Allen Hex Type, Ballpoint, 3/16" www.labem.pl 344 Order No. Description 99PS41MMBP consists of: 991X 99X5 9971MMBP 9972MMBP 9973MMBP 9974MMBP 9975MMBP 9976MMBP 9977MMBP Ballpoint Allen Hex Socket Type Screwdriver Set - Metric Size Order No. Description 99PS50 consists of: 991X 99X5 99821 99822 996 997 998 999 9910 9911 9912 99811 99250 Screwdriver & Nutdriver Set Regular Handle Extension 4" Blade, Screwdriver, Allen Hex Type, Ballpoint, 1,27 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 1,5 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 2 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 2,5 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 3 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 4 mm Blade, Screwdriver, Allen Hex Type, Ballpoint, 5 mm Regular Handle Extension 4" Blade, Screwdriver, Phillips No. 0 Blade, Screwdriver, Phillips No. 1 Blade, Nutdriver, 3/16" Blade, Nutdriver, 7/32" Blade, Nutdriver, 1/4" Blade, Nutdriver, 9/32" Blade, Nutdriver, 5/16" Blade, Nutdriver, 11/32" Blade, Nutdriver, 3/8" Blade, Screwdriver, Slotted, 3/16" Blade, Screwdriver, Slotted, 1/4" www.labem.pl 345 Series 99 Service Kits & Sets Order No. Description 99PS51MM consists of: 991X 99X5 994MM 9945MM 995MM 9955MM 996MM 997MM 998MM 999MM 9910MM 9911MM Interchangeable Shank, Nutdriver Set - Metric Size Order No. Description 99PS60 consists of: 991X 99X5 9961 9962 9963 9964 9965 9966 9967 9968 9969 Bristol Multiple Spline Socket Screwdriver Set Regular Handle Extension 4" Blade, Nutdriver, 4 mm Blade, Nutdriver, 4,5 mm Blade, Nutdriver, 5 mm Blade, Nutdriver, 5,5 mm Blade, Nutdriver, 6 mm Blade, Nutdriver, 7 mm Blade, Nutdriver, 8 mm Blade, Nutdriver, 9 mm Blade, Nutdriver, 10 mm Blade, Nutdriver, 11 mm Regular Handle Extension 4" Blade, Bristol 6-flute Multiple Spline, 0,048" Blade, Bristol 6-flute Multiple Spline, 0,060" Blade, Bristol 4-flute Multiple Spline, 0,069" Blade, Bristol 6-flute Multiple Spline, 0,072" Blade, Bristol 4-flute Multiple Spline, 0,076" Blade, Bristol 6-flute Multiple Spline, 0,096" Blade, Bristol 6-flute Multiple Spline, 0,111" Blade, Bristol 6-flute Multiple Spline, 0,145" Blade, Bristol 6-flute Multiple Spline, 0,183" www.labem.pl 346 Order No. Description 99XTD7 consists of: 991X 9910XTD 9915XTD 9920XTD 9925XTD 9927XTD 9930XTD Torx Screwdriver Tool Set Regular Handle Torx Blade No. 10 Torx Blade No. 15 Torx Blade No. 20 Torx Blade No. 25 Torx Blade No. 27 Torx Blade No. 30 Single Tools for Service Kits and Set Order No. Description 99831 99832 996XTD 998XTD Screwdriver, Pozidriv No. 1 Screwdriver, Pozidriv No. 2 Torx Blade No. 6 Torx Blade No. 8 www.labem.pl 347 Tool Cases Final appearance may vary Order No. T0044130000 consists of: 991X 994R 99X5 9971MM 9972MM 9973MM 9974MM 9975MM 9976MM 9977MM 994MM 9945MM 995MM 9955MM 996MM 997MM 998MM 999MM 99820 99821 99822 99811 Description Order No. Description 99250 99312 9938 Erop330 542E 543E 2211P 170M 812N 612N 86CG SX101 SX102 XST101 0056103699 0051304199 XL75 103S 0016100402 AC16C 0054002599 0060403504 Blade, Screwdriver, Slotted, 1/4" Blade, Screwdriver Slotted, 5/16" Reamer, 1/8" x 3/8" Tip Cutter, 130 mm, 40 Flat Nose Plier Round Nose Plier Needle Nose Plier Shearcutter, red handles Side Cutter Side Cutter Snip electronic Phillips Screwdriver, Stubby No.1 Phillips Screwdriver, Stubby No.2 Phillips Screwdriver, Super-tru-tip No.1 Soldering Iron W61, 60W DS7N Desoldering head for W 61 Offset Ratches, Screwdriver Set Wire Stripper & Cutter, Cam Stop Adjustable Hand File Cut 2, 100 mm Wrench, 150 mm RL 60/40 - 100 solder Y35CM Ultralock, Measuring Tape 5 m TCE150ST Tool Case synthetic material with special tools out of Apex Tools product lines - Metric Size Regular Handle T-Ratching Handle Extension 4" Blade, Screwdriver, Allen Hex, 1,27 mm Blade, Screwdriver, Allen Hex, 1,5 mm Blade, Screwdriver, Allen Hex, 2 mm Blade, Screwdriver, Allen Hex, 2,5 mm Blade, Screwdriver, Allen Hex, 3 mm Blade, Screwdriver, Allen Hex, 4 mm Blade, Screwdriver, Allen Hex, 5 mm Blade, Nutdriver, 4 mm Blade, Nutdriver, 4,5 mm Blade, Nutdriver, 5 mm Blade, Nutdriver, 5,5 mm Blade, Nutdriver, 6 mm Blade, Nutdriver, 7 mm Blade, Nutdriver, 8 mm Blade, Nutdriver, 9 mm Blade, Screwdriver, Phillips No.0 Blade, Screwdriver, Phillips No.1 Blade, Screwdriver, Phillips No.2 Blade, Screwdriver, Slotted, 3/16" www.labem.pl 348 Order No. Description TC100ST consists of: 991X 991R 994R 99X5 99X10 9961 9962 9963 9964 9965 9966 9967 9968 9969 9920 9921 9922 9923 99764 9924 99964 9925 9926 99125 99811 99250 99312 99820 99821 99822 9938 42H 46CG 50CG 51CG 53CG 54CG 66CG Order No. Description Tool Case with USA Standard Assortment - Inch Size Regular Handle Ratching Handle T-Ratching Handle Extension 4" Extension 7" Blade, Bristol 6-flute Multiple Spline, 0,048" Blade, Bristol 6-flute Multiple Spline, 0,060" Blade, Bristol 4-flute Multiple Spline, 0,069" Blade, Bristol 6-flute Multiple Spline, 0,072" Blade, Bristol 4-flute Multiple Spline, 0,076" Blade, Bristol 6-flute Multiple Spline, 0,096" Blade, Bristol 6-flute Multiple Spline, 0,111" Blade, Bristol 6-flute Multiple Spline, 0,145" Blade, Bristol 6-flute Multiple Spline, 0,183" Blade, Screwdriver, Allen Hex Type, 0,050" Blade, Screwdriver, Allen Hex Type, 1/16" Blade, Screwdriver, Allen Hex Type, 5/64" Blade, Screwdriver, Allen Hex Type, 3/32" Blade, Screwdriver, Allen Hex Type, 7/64" Blade, Screwdriver, Allen Hex Type, 1/8" Blade, Screwdriver, Allen Hex Type, 9/64" Blade, Screwdriver, Allen Hex Type, 5/32" Blade, Screwdriver, Allen Hex Type, 3/16" Blade, Screwdriver, Slotted, 1/8" Blade, Screwdriver, Slotted, 3/16" Blade, Screwdriver, Slotted, 1/4" Blade, Screwdriver, Slotted, 5/16" Blade, Screwdriver, Phillips No.0 Blade, Screwdriver, Phillips No.1 Blade, Screwdriver, Phillips No.2 Reamer, 1/8" x 3/8" Seizer, Straight Nose, Serrated jaw Wrench, adjustable, 6" Plier, adjustable, 6" Plier, Long Nose, 7" Plier, adjustable, 4" Plier, diagonal, 4" Plier, diagonal, 6" 57CG 59CG 86CG 103S M60 XL75 600 SB1 R3323 R181 R184 R3164 R3166 R144 R146 SX101 XST100 XST101 XST102 S3161 S5161 S388 S5166 P18 P19 HS6 HS8 HS10 HS11 HS12 HS14 HS16 HS18 998M 9910M PS120 www.labem.pl Plier, Needle Nose, 16" Plier, Special Purpose, 8" Electronic Snip, cushion grip, 6,5" Wire Stripper & Cutter, Cam Stop Adjustable Mini Screwdriver Set (7 pcs.) Offset Ratches, Screwdriver Set 4-way Pocket Tool Screwdriver/Nutdriver Convertible Blade Screwdriver, Round Blade, Pocket Clip Style, 3/32" x 3" Screwdriver, Round Blade, Pocket Clip Style, 1/8" x 2" Screwdriver, Round Blade, Regular, 1/8" x 2" Screwdriver, Round Blade, Regular, 3/16" x 4" Screwdriver, Round Blade, Regular, 3/16" x 6" Screwdriver, Round Blade, Regular, 1/4" x 4" Screwdriver, Round Blade, Regular, 1/4" x 6" Screwdriver, Phillips, Stubby No.1 Screwdriver, Phillips, Super-tru-tip No.0 Screwdriver, Phillips, Super-tru-tip No.1 Screwdriver, Phillips, Super-tru-tip No.2 Screwdriver, Square Blade, Stubby, 3/8" Screwdriver, Square Blade, Stubby, 5/16" Screwdriver, Square Blade, Regular, 3/8" Screwdriver, Square Blade, Regular, 5/16" Screwdriver, Allen Hex Type, 0,028" Screwdriver, Allen Hex Type, 0,035" Nutdriver, Hollow, 3/16" Nutdriver, Hollow, 1/4" Nutdriver, Hollow, 5/16" Nutdriver, Hollow, 11/32" Nutdriver, Hollow, 3/8" Nutdriver, Hollow, 7/16" Nutdriver, Hollow, 1/2" Nutdriver, Hollow, 9/16" Blade, Nutdriver, 1/4", magnetic Blade, Nutdriver, 5/16", magnetic Nutdriver Set 349 Tool Cases Order No. Description TCMB100ST consists of: 991X 991R 994R 99X5 99X10 9961 9962 9963 9964 9965 9966 9967 9968 9969 9920 9921 9922 9923 99764 9924 99964 9925 9926 99125 99811 99250 99312 99820 99821 99822 9938 42H 46CG 50CG 51CG 53CG 54CG 66CG 57CG Tool Case with Tools - Inch Size 350 Order No. Regular Handle Ratching Handle T-Ratching Handle Extension 4" Extension 7" Blade, Bristol 6-flute Multiple Spline, 0,048" Blade, Bristol 6-flute Multiple Spline, 0,060" Blade, Bristol 4-flute Multiple Spline, 0,069" Blade, Bristol 6-flute Multiple Spline, 0,072" Blade, Bristol 4-flute Multiple Spline, 0,076" Blade, Bristol 6-flute Multiple Spline, 0,096" Blade, Bristol 6-flute Multiple Spline, 0,111" Blade, Bristol 6-flute Multiple Spline, 0,145" Blade, Bristol 6-flute Multiple Spline, 0,183" Blade, Screwdriver, Allen Hex Type, 0,050" Blade, Screwdriver, Allen Hex Type, 1/16" Blade, Screwdriver, Allen Hex Type, 5/64" Blade, Screwdriver, Allen Hex Type, 3/32" Blade, Screwdriver, Allen Hex Type, 7/64" Blade, Screwdriver, Allen Hex Type, 1/8" Blade, Screwdriver, Allen Hex Type, 9/64" Blade, Screwdriver, Allen Hex Type, 5/32" Blade, Screwdriver, Allen Hex Type, 3/16" Blade, Screwdriver, Slotted, 1/8" Blade, Screwdriver, Slotted, 3/16" Blade, Screwdriver, Slotted, 1/4" Blade, Screwdriver, Slotted, 5/16" Blade, Screwdriver, Phillips No.0 Blade, Screwdriver, Phillips No.1 Blade, Screwdriver, Phillips No.2 Reamer 1/8" x 3/8" Seizer, Straight Nose, Serrated jaw Wrench, adjustable, 6" Plier, adjustable, 6" Plier, Long Nose, 7" Plier, adjustable, 4" Plier, diagonal, 4" Plier, diagonal, 6" Plier, Needle-Nose, 16" 59CG 86CG 103S K22 M60 XL75 600 SB1 R3323 R181 R184 R5325 R3164 R3166 R144 R146 SX101 XST100 XST101 XST102 S3161 S5161 S388 S5166 P18 P19 HS6 HS8 HS10 HS11 HS12 HS14 HS16 HS18 998M 9910M PS120 www.labem.pl Description Plier, Special Purpose, 8" Electronic Snip, cushion grip, 6,5" Wire Stripper & Cutter, Cam Stop Adjustable Electricians knife Mini Screwdriver Set (7 pcs.) Offset Ratches, Screwdriver Set 4-way Pocket Tool Screwdriver/Nutdriver Convertible Blade Screwdriver, Round Blade, Pocket Clip Style, 3/32" x 3" Screwdriver, Round Blade, Pocket Clip Style, 1/8" x 2" Screwdriver, Round Blade, Regular, 1/8" x 2" Screwdriver, Round Blade, Regular, 5/32" Screwdriver, Round Blade, Regular, 3/16" x 4" Screwdriver, Round Blade, Regular, 3/16" x 6" Screwdriver, Round Blade, Regular, 1/4" x 4" Screwdriver, Round Blade, Regular, 1/4" x 6" Screwdriver, Phillips, Stubby No.1 Screwdriver, Phillips, Super-tru-tip No.0 Screwdriver, Phillips, Super-tru-tip No.1 Screwdriver, Phillips, Super-tru-tip No.2 Screwdriver, Square Blade, Stubby, 3/8" Screwdriver, Square Blade, Stubby, 5/16" Screwdriver, Square Blade, Regular, 3/8" Screwdriver, Square Blade, Regular, 5/16" Screwdriver, Allen Hex Type, 0,028" Screwdriver, Allen Hex Type, 0,035" Nutdriver, Hollow, 3/16" Nutdriver, Hollow, 1/4" Nutdriver, Hollow, 5/16" Nutdriver, Hollow, 11/32" Nutdriver, Hollow, 3/8" Nutdriver, Hollow, 7/16" Nutdriver, Hollow, 1/2" Nutdriver, Hollow, 9/16" Blade, Nutdriver, 1/4", magnetic Blade, Nutdriver, 5/16", magnetic Nutdriver Set Specials Offset Ratchet Screwdriver Set Order No. Description XL70 consists of: XL3 XL4 XL5 XL6 XL7 XL8 XL9 XL10 XL12 XL14 XL16 XL17 XL18 XL20 XL21 XL24 XL25 XL27 XL50X Offset Ratchet Screwdriver Set Allen Hex Screw Bit 0,050" (1,27 mm) Allen Hex Screw Bit 1/16" (1,54 mm) Allen Hex Screw Bit 5/64" (1,98 mm) Allen Hex Screw Bit 3/32" (2,38 mm) Allen Hex Screw Bit 7/64" (1,54 mm) Allen Hex Screw Bit 1/8" (3,17 mm) Allen Hex Screw Bit 9/64" (3,57 mm) Allen Hex Screw Bit 5/32" (3,97 mm) Allen Hex Screw Bit 3/16" (4,76 mm) Allen Hex Screw Bit 7/32" (5,56 mm) Allen Hex Screw Bit 1/4" (6 mm) Slotted Screw Bit 1/4" (6 mm) Allen Hex Screw Bit 5/16" (7,94 mm) Phillips Screw Bit No. 1 Phillips Screw Bit No. 2 Adapter bit Slotted Screw Bit 3/16" (4,76 mm) Offset Ratchet, reversible Screwdriver Extension www.labem.pl 351 Index Exploded Drawings Model Page DSX 80............................................................................ 353 DSX 120.......................................................................... 353 DXV 80............................................................................ 354 DSXV 80.......................................................................... 354 FE 25............................................................................... 355 FE 50............................................................................... 355 FE 50M............................................................................ 356 FE 75............................................................................... 356 FE 80............................................................................... 357 HAP 200.......................................................................... 357 LR 21............................................................................... 358 MPR 80........................................................................... 358 PUD 151R........................................................................ 359 Pyropen + Pyropen Piezo................................................. 359 Pyropen JR....................................................................... 360 W 61 / W 101.................................................................. 360 WD 1 / WD 1000............................................................. 361 WD 1M / WD 1000M...................................................... 361 WD 2 / WD 2000............................................................. 362 WD 2M............................................................................ 363 WD 3M............................................................................ 362 WDD 161V...................................................................... 363 WDD 81V........................................................................ 364 WDH 10T / 20T............................................................... 364 WFE................................................................................. 365 WFE 2ES.......................................................................... 366 WFE 2S............................................................................ 365 WFE 4S............................................................................ 367 WFE P.............................................................................. 366 WHA 900......................................................................... 367 WHA 3000P..................................................................... 368 WHA 3000V.................................................................... 368 WHP 1000....................................................................... 369 WHP 3000....................................................................... 369 WMD 1S.......................................................................... 370 WMD 3 / WMD 3K2........................................................ 370 WMRT............................................................................. 371 WP 65............................................................................. 371 WP 80............................................................................. 372 WP 120........................................................................... 372 WP 200........................................................................... 373 WR 2............................................................................... 372 WR 3M............................................................................ 374 WS 51.............................................................................. 374 WS 81.............................................................................. 375 WSD 81........................................................................... 376 WSD 81i.......................................................................... 377 WSD 121......................................................................... 377 WSD 151......................................................................... 378 WSD 161......................................................................... 378 WSF 81D......................................................................... 379 WSP 80............................................................................ 379 WTA 50........................................................................... 380 Model WTCP 51......................................................................... 380 WX 1............................................................................... 381 WX 2............................................................................... 381 WXA 2............................................................................. 382 WXD 2............................................................................. 382 WXDP 120....................................................................... 383 WXDV 120...................................................................... 383 WXP 65........................................................................... 384 WXP 120......................................................................... 384 WXP 200......................................................................... 385 www.labem.pl 352 Page DSX 80 DSX 120 www.labem.pl 353 DXV 80 DSXV 80 Exploded Drawings www.labem.pl 354 FE 25 FE 50 www.labem.pl 355 FE 75 FE 50M Exploded Drawings www.labem.pl 356 FE 80 HAP 200 www.labem.pl u am: 1.2.2012 357 MPR 80 Gedruckt durch: Martinu am: 1.2.2012 LR 21 Exploded Drawings 358 www.labem.pl www.labem.pl 359 Pyropen + Pyropen Piezo PUD 151R 360 4D9R048/4 5 87 160 09 5 87 167 80 5 10 660 99 5 11 622 99 5 11 301 99 5 10 203 99 120V 5 61 210 99 230V 5 61 216 99 5 11 343 99 www.labem.pl W101 5 70 031 99 5 87 167 95 5 87 167 82 W 61, W 101 W61 5 70 030 99 5 87 167 95 5 87 167 82 5 87 160 09 5 87 167 80 5 10 660 99 5 11 622 99 5 11 300 99 5 10 203 99 5 61 200 99 120V 5 61 206 99 230V 5 11 342 99 Pyropen JR. Exploded Drawings Gedruckt durch: Martinu am: 1.2.2012 www.labem.pl 361 Since 3. Quarter 2007 WD 1M / WD 1000M Since 3. Quarter 2007 WD 1 / WD 1000 WD 3M Since 3. Quarter 2007 WD 2 / WD 2000 Exploded Drawings 362 www.labem.pl www.labem.pl 363 WDD 161V Since 3. Quarter 2007 WD 2M WDH 10T / 20T WDD 81V Exploded Drawings www.labem.pl 364 WFE WFE 2S www.labem.pl 365 WFE P WFE 2ES Exploded Drawings www.labem.pl 366 WFE 4S WHA 900 www.labem.pl 367 368 5 87 577 92 5 87 577 91 www.labem.pl 5 87 577 96 (230V) 5 87 578 04 (120V) 5 87 367 94 WHA 3000P 5 15 049 99 5 87 577 98 5 15 043 99 WHA 3000P 4D9R0829 5 87 577 95 5 87 577 98 T4A (230V) 5 87 578 08 T8A (120V) 5 87 117 18 5 70 040 99 5 70 070 99 D GB 5 87 577 94 (230V) 5 87 578 03 (120V) F 5 70 043 99 5 70 072 99 5 70 048 99 5 70 073 99 I CH USA DK 5 87 577 96 (230V) 5 87 578 04 (120V) 5 87 577 92 5 87 578 16 5 87 578 15 5 87 578 17 WHA 3000V 515 049 99 5 87 578 14 F 5 87 578 18 5 70 040 99 515 043 99 5 87 578 11 4D9R832 513 703 99 T 3,15A (230V) 587 369 95 T 6,3A (120V) 5 87 117 95 D 5 70 070 99 5 70 043 99 5 70 072 99 GB I CH 5 70 048 99 5 70 073 99 USA DK Exploded Drawings www.labem.pl 369 5 87 577 86 (230V) 5 87 578 02 (120V) 5 87 577 85 (230V) 5 87 578 07 (120V) 5 87 577 83 (230V) 5 87 578 05 (120V) WHP 3000 F 5 87 577 88 5 87 577 84 (230V) 5 87 578 06 (120V) 5 87 577 82 WHP 3000 5 70 040 99 5 70 070 99 D GB 5 70 043 99 5 70 072 99 5 70 048 99 5 70 073 99 I CH USA DK WHP 1000 WMD 3 / WMD 3K2 WMD 1S Exploded Drawings www.labem.pl 370 WMRT WP 65 www.labem.pl 371 WP 120 WP 80 Exploded Drawings www.labem.pl 372 WP 200 WR 2 www.labem.pl 373 374 consists of PU 81 and soldering iron valid from production date November 2005 WS 51 WR 3M 4D9R905 WR 3M Exploded Drawings www.labem.pl www.labem.pl 375 valid until production date October 2005 WS 81 valid until production date October 2005 WS 51 WSD 81 consists of PU 81 and soldering iron WSP 80 valid from production date November 2005 WS 81 Exploded Drawings 376 www.labem.pl WSD 81i WSD 121 www.labem.pl 377 378 www.labem.pl 4D9R731/4 WSD 161 5 87 447 11 5 87 489 76 (120V) 5 87 489 44 (230V) 5 87 488 07 5 87 488 04 5 87 487 32 5 70 073 99 5 70 043 99 5 70 072 99 5 70 070 99 5 70 040 99 5 70 048 99 5 87 447 12 5 29 161 99 WSP80 5 87 447 30 5 87 447 13 F GB D I CH DK USA WSD 161 5 87 447 10 LT-Serie 5 87 489 02 5 87 487 28 (4 Stck) 5 87 489 66 (120V) 5 87 487 74 (230V) 5 87 489 43 5 87 489 70 USA 5 87 038 92 (WSP) 5 87 039 13 (4 Stck) 5 87 447 57 5 87 447 29 (WSP) 5 22 419 99 5 87 489 42 (C) 5 87 489 64 (F) USA 5 87 489 34 (3 Stck) 5 21 417 99 T800mA (230V) (5 Stck) 5 87 157 20 T1,6A (120V) 5 87 488 05 WSD 151 Explosionszeichnungen Exploded Drawings www.labem.pl 379 WSP 80 5 87 328 82 5 87 328 81 P5 5 87 328 80 P8 5 87 489 02 5 87 328 85 5 87 328 84 WSF 81D 1 LT-Serie 5 87 328 83 5 87 328 78 4D9R734_1 WTCP 51 WTA 50 Exploded Drawings www.labem.pl 380 WX 1 WX 2 www.labem.pl 381 WXD 2 WXA 2 Exploded Drawings www.labem.pl 382 www.labem.pl 383 WXDV 120 WXDP 120 WXP 120 WXP 65 Exploded Drawings www.labem.pl 384 WXP 200 www.labem.pl 385 Numerical Index Order No. Page 185-1.5MM......................................216 185-10MM.......................................216 185-10MM.......................................216 185-2.5MM......................................216 185-2MM.........................................216 185-3MM.........................................216 185-4MM.........................................216 185-5MM.........................................216 185-6MM.........................................216 185-7MM.........................................216 185-8MM.........................................216 185-9MM.........................................216 320-000X.........................................217 320-00X...........................................217 320-0X.............................................217 320-1X.............................................217 320-20X...........................................217 320-2X.............................................217 326-000X.........................................217 326-00X...........................................217 326-0X.............................................217 326-1X.............................................217 326-20X...........................................217 326-2X.............................................217 440-1-PZDX......................................217 440-215-PZDX..................................217 440-22-PZDX....................................217 440-2-PZDX......................................217 440-3-PZDX......................................217 440-4-PZDX......................................217 440-TX-05X.......................................215 440-TX-06X.......................................215 440-TX-07X.......................................215 440-TX-08X.......................................215 440-TX-09X.......................................215 440-TX-10X.......................................215 440-TX-15X.......................................215 440-TX-20X.......................................215 440-TX-25X.......................................215 440-TX-27X.......................................215 440-TX-30X.......................................215 440-TX-40X.......................................215 445-000X.........................................215 445-00X...........................................215 445-0X.............................................215 445-10X...........................................215 445-20X...........................................215 445-30X...........................................215 446-0X.............................................214 446-1-PZDX......................................214 446-1X.............................................214 446-2-PZDX......................................214 446-2X.............................................214 4910-AX...........................................220 4910X..............................................220 491-A-PZDX......................................218 491-AX.............................................220 491-PZDX.........................................218 491X................................................220 492-A-PZDX......................................218 492-AX.............................................220 492-PZDX.........................................218 492X................................................220 493-A-PZDX......................................218 493-AX.............................................220 493-PZDX.........................................218 493X................................................220 49-A-TX-05.......................................219 49-A-TX-06.......................................219 49-A-TX-07.......................................219 49-A-TX-08.......................................219 49-A-TX-09.......................................219 49-A-TX-10.......................................219 49-A-TX-15.......................................219 49-A-TX-20.......................................219 49-B-TX-25.......................................219 49-B-TX-27.......................................219 49-B-TX-30.......................................219 49-B-TX-40.......................................219 49-TX-05...........................................219 49-TX-06...........................................219 386 Order No. Page 49-TX-07...........................................219 49-TX-08...........................................219 49-TX-09...........................................219 49-TX-10...........................................219 49-TX-15...........................................219 49-TX-20...........................................219 49-TX-25...........................................219 49-TX-27...........................................219 49-TX-30...........................................219 49-TX-40...........................................219 4CT5A6.............................................188 4CT5A7.............................................188 4CT5A8.............................................188 4CT5B7.............................................188 4CT5B8.............................................188 4CT5C6.............................................188 4CT5C7.............................................188 4CT5C8.............................................188 4CT5D7............................................188 4CT5D8............................................188 4CT6C7.............................................189 4CT6C8.............................................189 4CT6D7............................................189 4CT6D8............................................189 4CT6D9............................................189 4CT6E7.............................................189 4CT6E8.............................................189 4ETA.................................................184 4ETB.................................................184 4ETBB...............................................184 4ETBS...............................................184 4ETC.................................................184 4ETCC...............................................184 4ETCS...............................................184 4ETD.................................................184 4ETDS...............................................184 4ETE.................................................184 4ETF.................................................184 4ETH.................................................184 4ETK.................................................184 4ETL.................................................184 4ETM................................................184 4ETO.................................................184 4ETP.................................................184 4ETR.................................................184 4ETS.................................................184 4PTA6...............................................186 4PTA7...............................................186 4PTA8...............................................186 4PTAA7............................................187 4PTAA8............................................187 4PTAA9............................................187 4PTB6...............................................186 4PTB7...............................................186 4PTB8...............................................186 4PTB9...............................................186 4PTBB7.............................................187 4PTBB8.............................................187 4PTBB9.............................................187 4PTC7...............................................186 4PTC8...............................................186 4PTC9...............................................186 4PTCC7.............................................187 4PTCC8.............................................187 4PTCC9.............................................187 4PTCS7.............................................186 4PTD7...............................................186 4PTD8...............................................186 4PTD9...............................................186 4PTDD7............................................187 4PTDD8............................................187 4PTDD9............................................187 4PTDS7.............................................186 4PTE8...............................................186 4PTE9...............................................186 4PTF7...............................................187 4PTF8...............................................187 4PTH6...............................................186 4PTH7...............................................186 4PTH8...............................................186 4PTK6...............................................186 Order No. Page 4PTK7...............................................186 4PTK8...............................................186 4PTL6...............................................186 4PTL7...............................................186 4PTL8...............................................186 4PTM7..............................................186 4PTM8..............................................186 4PTM9..............................................186 4PTO6...............................................186 4PTO7...............................................186 4PTO8...............................................186 4PTR7...............................................186 4PTR8...............................................186 4PTS7...............................................186 4PTS8...............................................186 4SPI15210........................................191 4SPI15211........................................191 4SPI15212........................................191 4SPI15213........................................191 4SPI26200........................................191 4SPI26201........................................191 4SPI26206........................................191 4SPI40220........................................191 4SPI40224........................................191 4SPI40225........................................191 4SPI40226........................................191 4SPI80230........................................191 4SPI80231........................................191 4SPI80232........................................191 4SPI80234........................................191 4SPI80235........................................191 4SPI80237........................................191 6966EK...............................................71 AM-1.5MM.......................................218 AM-10MM........................................218 AM-2.5MM.......................................218 AM-2MM..........................................218 AM-3MM..........................................218 AM-3MM-3......................................218 AM-3MM-4......................................218 AM-4MM..........................................218 AM-5MM..........................................218 AM-5MM-4......................................218 AM-6MM..........................................218 AM-6MM-4......................................218 AM-7MM..........................................218 AM-8MM..........................................218 APC5132CM.....................................229 KDS1412P........................................227 KDS141P..........................................227 KDS14TNP........................................228 KDS1512P........................................227 KDS16112P......................................227 KDS1612P........................................227 KDS161P..........................................227 KDS16TNP........................................228 KDS1712P........................................227 KDS1812P........................................227 KDS181P..........................................227 KDS18TNP........................................228 KDS1912P........................................227 KDS191P..........................................227 KDS2012P........................................227 KDS201P..........................................227 KDS20TNP........................................228 KDS2112P........................................227 KDS2212P........................................227 KDS221P..........................................227 KDS22TNP........................................228 KDS2312P........................................227 KDS2512P........................................227 KDS260L...........................................225 KDS260M.........................................225 KDS260S..........................................225 KDS301............................................225 KDS3012P........................................227 KDS660............................................227 KDS805S6........................................226 KDS806V..........................................224 KDS810S6........................................226 KDS816............................................226 www.labem.pl Order No. Page KDS825............................................229 KDS900............................................229 KDS901............................................229 KDSSAMPLEPACK.............................227 M-490..............................................216 M-490-2...........................................216 M-497..............................................216 NT1..................................................170 NT1S.................................................170 NT1SC..............................................170 NT1X................................................170 NT4..................................................170 NT6..................................................170 NTA..................................................170 NTAX................................................170 NTB..................................................170 NTC..................................................170 NTD..................................................170 NTGW...............................................170 NTH..................................................170 NTK..................................................170 NTMS...............................................170 PS100A...............................................92 PS2001A.............................................92 PS200A...............................................92 SA21A................................................92 SA21A1..............................................92 SM15748BK.......................................97 SMT0504A........................................182 SMT1206D........................................182 SMT8K..............................................182 SMTA................................................182 T0051000199...................................150 T0051005399...................................150 T0051005571...................................150 T0051031199...................................184 T0051170699.....................................90 T0051170799.....................................90 T0051170899.....................................90 T0051170999.....................................90 T0051176799...................................189 T0051301099.....................................96 T0051301199.....................................96 T0051301299.....................................96 T0051301399.....................................93 T0051301799.....................................93 T0051302699.....................................96 T0051302799.....................................96 T0051302899.....................................96 T0051303199...............................95, 96 T0051312099.........................39, 51, 69 T0051312599...................................131 T0051314000...................................194 T0051314100...................................194 T0051314200...................................194 T0051314300...................................194 T0051314400...................................194 T0051314500...................................194 T0051314600...................................194 T0051314700...................................194 T0051314800...................................194 T0051315000...................................194 T0051315100...................................194 T0051315200...................................194 T0051315399...................................194 T0051317199...................................158 T0051317399...................................141 T0051317499...................................141 T0051317799...................................141 T0051317899...................................141 T0051318099.............................50, 155 T0051318299...................................155 T0051318399...................................154 T0051319099.................50, 53, 61, 154 T0051319899...................................157 T0051320199.............................60, 157 T0051320299...................................157 T0051320499...................................155 T0051320599...................................155 T0051325010...................................197 T0051325099...................................197 Order No. Page T0051325110...................................197 T0051325199...................................197 T0051325210...................................197 T0051325299...................................197 T0051325310...................................197 T0051325399...................................197 T0051325410...................................197 T0051325499...................................197 T0051325510...................................197 T0051325599...................................197 T0051325610...................................197 T0051325699...................................197 T0051325710...................................197 T0051325799...................................197 T0051325899...................................197 T0051325910...................................197 T0051325999...................................197 T0051326010...................................197 T0051326099...................................197 T0051326110...................................197 T0051326199...................................197 T0051326210...................................197 T0051326299...................................197 T0051326310...................................197 T0051326399...................................197 T0051326410...................................197 T0051326499...................................197 T0051326510...................................197 T0051326599...................................197 T0051326610...................................197 T0051326699...................................197 T0051350099...................................196 T0051350199...................................196 T0051350299...................................196 T0051350399...................................196 T0051350499...................................156 T0051351099...................................195 T0051351199...................................195 T0051351299...................................195 T0051351399...................................195 T0051351499...................................195 T0051351599...................................195 T0051351699...................................195 T0051352799...................................195 T0051353099...................................195 T0051353299...................................195 T0051353399...................................195 T0051355099...................................195 T0051355199...................................195 T0051355299...................................195 T0051360499...................................154 T0051377099...................................195 T0051379099...................................194 T0051382499.....................................94 T0051382599.....................................94 T0051382799...............................94, 96 T0051383299.....................................85 T0051383599.....................................88 T0051384099.....................................94 T0051384199.....................................94 T0051384799.....................................83 T0051386099.....................................95 T0051386199.....................................95 T0051386299 . ..................................95 T0051386399.....................................95 T0051386499.....................................95 T0051386599 . ..................................95 T0051386699 . ..................................95 T0051386799.....................................95 T0051386899.....................................95 T0051386999.....................................95 T0051387099 . ..................................95 T0051387299.....................................95 T0051387399.....................................95 T0051387499.....................................95 T0051387599.....................................95 T0051387699.....................................95 T0051387799.....................................95 T0051387899.....................................95 T0051387999.....................................95 T0051388099.....................................95 Order No. Page T0051388199.....................................95 T0051388299.....................................95 T0051388399.....................................95 T0051388499.....................................95 T0051388599.....................................95 T0051388699.....................................95 T0051388799.....................................95 T0051388899.....................................95 T0051500699...................................137 T0051502099...................................130 T0051502699.....................................88 T0051502799...............................28, 69 T0051502899.....................................39 T0051507699...................................136 T0051508099...................................136 T0051508699...................................136 T0051512199..................16, 18, 19, 24, ................................. 26, 51, 53, 60, 61 T0051512499...............................94, 96 T0051512699.....................................96 T0051512799.....................................96 T0051514799.....................................37 T0051515299...................................137 T0051515399.............................50, 155 T0051515599.....................................72 T0051515699...................................131 T0051516199.................24, 37, 50, 144 T0051516799...................................137 T0051516899...................................136 T0051516999.............................17, 141 T0051517199.......................17, 18, 140 T0051517299.............................60, 157 T0051605999.....................................42 T0051606099.....................................42 T0051607599.....................................43 T0051608799.....................................43 T0051612099...................................193 T0051612199.............................193, 42 T0051612299...................................193 T0051612399...................................193 T0051612499...................................193 T0051612599...................................193 T0051612799...................................193 T0051612999...................................193 T0051613099...................................193 T0051613299...................................193 T0051613499.............................43, 192 T0051613599.............................43, 193 T0051614099...................................193 T0051614199...................................193 T0051614299.............................43, 193 T0051614399...................................193 T0051615099...................................193 T0051615199...................................193 T0051615699.....................................42 T0051615899...................................193 T0051615999.............................42, 193 T0051616099...............................42, 43 T0051616199...................................192 T0051616599...................................192 T0051616699...................................192 T0051616799...................................192 T0051616899...................................192 T0051616999...................................192 T0051617299...................................192 T0051644399...................................192 T0051644499...................................192 T0051644599...................................192 T0051644699...................................192 T0051644799.............................43, 192 T0051644899...................................192 T0051645099.............................43, 192 T0052474999...................................195 T0052475099...................................184 T0052503199.....................................91 T0052503299.....................................91 T0052509899.....................................97 T0052510699...................................149 T0052512599...................................131 T0052541000...................................130 T0052609899.....................................97 Order No. Page T0052616299...........................130, 149 T0052620299...................................185 T0052702899.....................................86 T0052702999.....................................86 T0052704099.....................................90 T0052704299.....................................90 T0052704399.....................................90 T0052711599.......................68, 69, 158 T0052711699...................................159 T0052711799.............................52, 159 T0052711899...................................158 T0052711999..............................159,67 T0052712099...................................159 T0052811699.....................................39 T0052812199.....................................39 T0052812299.....................................39 T0052812699...................................131 T0052820699...............................38, 39 T0052822699...............................38, 39 T0052910999.....................................85 T0052916199.......................28, 29, 146 T0052916399...................................147 T0052916699...........................130, 148 T0052917099.............................28, 147 T0052917199...................................140 T0052918099.................24, 50, 53, 146 T0052918199...................................146 T0052918499...............................50, 51 T0052918599...................................131 T0052918699...................................131 T0052918799...................................149 T0052918999...................................147 T0052919099...................................140 T0052919399.......................27, 51, 144 T0052919499...................................144 T0052919799.....................................37 T0052919899.....................................37 T0052919999...................................145 T0052920099...................................145 T0052920199.......................16, 18, 143 T0052920299.............................60, 143 T0052920399.......................17, 18, 140 T0052920499...................................140 T0052920599...................................145 T0052920699...................................145 T0052920799...................................144 T0052921199.............................19, 142 T0052921299...................................142 T0052921499...................................131 T0052921599.......................26, 61, 142 T0052921699...................................142 T0053118099.....................................84 T0053118499.....................................84 T0053118599.....................................25 T0053119099...................79, 83, 84, 87 T0053119199.................79, 84, 87, 115 T0053124699.....................................85 T0053163699...................................224 T0053165699...................................224 T0053171670.....................................71 T0053171699.....................................71 T0053210599.....................................31 T0053220699.....................................31 T0053222499.....................................31 T0053222699.....................................31 T0053250699.....................................29 T0053252699.....................................29 T0053252699.....................................29 T0053260699.....................................28 T0053262699.....................................28 T0053266671...............................36, 37 T0053266699.....................................69 T0053268699.....................................69 T0053276699.....................................28 T0053277670.....................................27 T0053278670.....................................33 T0053293699.....................................41 T0053295699.........................23, 26, 27 T0053296699.....................................26 T0053297699.....................................26 T0053312599...................................146 www.labem.pl Order No. Page T0053313199...................................147 T0053313399...................................158 T0053315199...........................130, 148 T0053316499.....................................89 T0053316599.....................................89 T0053316699.....................................89 T0053316799.....................................88 T0053334699.........................70, 76, 77 T0053336699.........................70, 76, 78 T0053338699...................77, 78, 79, 87 T0053355699.....................................77 T0053359699.....................................78 T0053364699...............................79, 87 T0053364899.....................................86 T0053366699.........................49, 50, 51 T0053368399.....................................50 T0053368699.....................................50 T0053370699................................76,81 T0053371699.....................................87 T0053377699.........49, 53, 59, 61, 66, 68 T0053378699.....................................68 T0053380699.....................................53 T0053400699.........................23, 24, 25 T0053402670.....................................24 T0053402699.....................................24 T0053415699.....................................23 T0053417699...................15, 18, 19, 33 T0053418699.....................................18 T0053419699.....................................18 T0053420699...................15, 16, 17, 33 T0053425699...............................66, 67 T0053426699...............................60, 59 T0053427699.....................................19 T0053428699.....................................60 T0053429699.....................................60 T0053430699.....................................67 T0053631699...................................134 T0053631999...................................134 T0053632199...................................133 T0053632299...................................133 T0053632399...................................133 T0053632499...................................134 T0053632699...................................135 T0053632999...................................134 T0053633899...................................135 T0053634399...................................135 T0053634499...................................133 T0053635299...................................130 T0053638699...................................128 T0053640299...................................128 T0053640799...................................132 T0053641099...................................132 T0053641400...................................134 T0053641599...................................135 T0053642199...................................132 T0053650699...................................109 T0053651689...................................109 T0053657199...........................108, 112 T0053657299...........................107, 112 T0053657399...........................108, 109, ..............................................112, 113, 115 T0053657499...........................107, 108, ..............................................109, 112, 119 T0053657599 . ................................120 T0053657699...................................118 T0053657799...................................115 T0053657899...................................114 T0053657999...................................113 T0053658099...................................114 T0053658899...................................110 T0053658999...................................110 T0053659099...................................123 T0053659199...................................116 T0053659299...................................117 T0053659399...................................115 T0053659899...................................114 T0053660699...................................106 T0053661699...................................106 T0053663699...................................107 T0053665699...................................107 T0053666699...................................111 387 Numerical Index Order No. Page T0053666799...................................111 T0053670699...................................129 T0053900699...........................210, 209 T0053901699.............................209, 21 T0053909199...................................211 T0053909299...................................211 T0053909399...................................211 T0053909499...................................211 T0053909599...................................211 T0054103999...................................184 T0054104099...................................184 T0054104599...................................184 T0054130799...................................186 T0054170399...................................184 T0054210799...................................188 T0054210899...................................188 T0054211799...................................188 T0054212899...................................188 T0054213899...................................188 T0054230799...................................189 T0054231899...................................189 T0054240799...................................190 T0054240899...................................190 T0054241799...................................190 T0054241899...................................190 T0054242899...................................190 T0054250799...................................190 T0054250899...................................190 T0054251799...................................190 T0054251899...................................190 T0054412199...................................180 T0054414199...................................185 T0054414399...................................185 T0054414499...................................185 T0054414599...................................185 T0054414699...................................185 T0054414799...................................185 T0054414999...................................185 T0054415299...................................185 T0054415399...................................185 T0054426099...................................185 T0054426199...................................185 T0054426299...................................185 T0054426399...................................185 T0054426499...................................185 T0054426599...................................185 T0054426699...................................185 T0054426799...................................185 T0054426899...................................185 T0054426999...................................185 T0054427099...................................185 T0054440111...................................177 T0054440311...................................177 T0054440410...................................177 T0054440411...................................177 T0054440499...................................177 T0054440510...................................177 T0054440511...................................177 T0054440599...................................177 T0054440610...................................178 T0054440611...................................178 T0054440699...................................178 T0054440710...................................177 T0054440711...................................177 T0054440799...................................177 T0054440810...................................178 T0054440811...................................178 T0054440873...................................178 T0054440877...................................178 T0054440881...................................178 T0054440899...................................178 T0054440910...................................177 T0054440911...................................177 T0054440999...................................177 T0054441010...................................178 T0054441011...................................178 T0054441099...................................178 T0054441110...................................177 T0054441199...................................177 T0054441211...................................177 T0054441311...................................177 388 Order No. Page T0054441411...................................177 T0054441499...................................177 T0054441510...................................177 T0054441511...................................177 T0054441599...................................177 T0054441699...................................179 T0054441799...................................182 T0054442011...................................177 T0054442099...................................177 T0054442171...................................178 T0054442210...................................182 T0054442271...................................182 T0054442299.............................35, 182 T0054442311...................................178 T0054442399...................................178 T0054442410...................................178 T0054442499...................................178 T0054442510...................................177 T0054442599...................................177 T0054442610...................................177 T0054442699...................................177 T0054442710...................................177 T0054442799...................................177 T0054442810...................................177 T0054442899...................................177 T0054443010...................................180 T0054443099...................................180 T0054443110...................................180 T0054443199...................................180 T0054443210...................................180 T0054443299...................................180 T0054443310...................................182 T0054443399.............................35, 182 T0054443510...................................177 T0054443599...................................177 T0054443699...................................177 T0054443710...................................177 T0054443799...................................177 T0054443810...................................177 T0054443899...................................177 T0054443910...................................178 T0054443999...................................178 T0054444010...................................177 T0054444099...................................177 T0054444110...................................182 T0054444199.............................35, 182 T0054444210...................................177 T0054444299...................................177 T0054444310...................................177 T0054444399...................................177 T0054444410...................................178 T0054444499...................................178 T0054444510...................................178 T0054444599...................................178 T0054444810...................................177 T0054444899...................................177 T0054444999...................................179 T0054445099...................................183 T0054445199...................................183 T0054445299...................................183 T0054445399...................................183 T0054445499...................................183 T0054445599...................................183 T0054445699...................................183 T0054446099...................................183 T0054446199...................................183 T0054446299...................................183 T0054446789...................................181 T0054446999...................................177 T0054447810...................................178 T0054447899...................................178 T0054447910...................................178 T0054447999...................................178 T0054448199...................................178 T0054448210...................................178 T0054448211...................................178 T0054448299...................................178 T0054448399...................................180 T0054448499...................................178 T0054448610...................................178 T0054448699...................................178 Order No. Page T0054448710...................................178 T0054448799...................................178 T0054448899...................................177 T0054448910...................................177 T0054448911...................................177 T0054449410...................................177 T0054449499...................................177 T0054449699...................................177 T0054449799...................................177 T0054449899...................................177 T0054450199...................................181 T0054450299...................................181 T0054450399...................................181 T0054450499...................................181 T0054450599...................................181 T0054450699...................................181 T0054450799...................................181 T0054450899...................................181 T0054450999...................................181 T0054451099...................................181 T0054451110...................................178 T0054451199...................................178 T0054451399...................................183 T0054451611...................................177 T0054451611...................................177 T0054451699...................................177 T0054451711...................................177 T0054451711...................................177 T0054451799...................................177 T0054451811...................................177 T0054451811...................................177 T0054451899...................................177 T0054451999...................................178 T0054451999...................................178 T0054452010...................................179 T0054452011...................................179 T0054452099...................................179 T0054452110...................................179 T0054452111...................................179 T0054452199...................................179 T0054452210...................................179 T0054452211...................................179 T0054452299...................................179 T0054452310...................................179 T0054452311...................................179 T0054452399...................................179 T0054452410...................................179 T0054452411...................................179 T0054452499...................................179 T0054452510...................................179 T0054452511...................................179 T0054452599...................................179 T0054452610...................................179 T0054452611...................................179 T0054452699...................................179 T0054452710...................................179 T0054452711...................................179 T0054452799...................................179 T0054452810...................................179 T0054452811...................................179 T0054452899...................................179 T0054452910...................................179 T0054452911...................................179 T0054452999...................................179 T0054453010...................................179 T0054453099...................................179 T0054453110...................................179 T0054453199...................................179 T0054453210...................................179 T0054453299...................................179 T0054453310...................................179 T0054453399...................................179 T0054453410...................................179 T0054453499...................................179 T0054453510...................................179 T0054453511...................................179 T0054453599...................................179 T0054453699...................................179 T0054453710...................................179 T0054453711...................................179 T0054453799...................................179 www.labem.pl Order No. Page T0054453899...................................179 T0054453911...................................179 T0054453999...................................179 T0054454011...................................179 T0054454099...................................179 T0054460199...................................165 T0054460299...................................165 T0054460399...................................164 T0054460499...................................164 T0054460599...................................164 T0054460699...................................164 T0054460799...................................165 T0054460899...................................164 T0054460999...................................164 T0054461099...................................165 T0054461199...................................164 T0054461299...................................164 T0054461399...................................165 T0054462499...................................165 T0054462599...................................165 T0054465199...................................167 T0054465299...................................166 T0054465399...................................166 T0054465499...................................166 T0054465699...................................167 T0054466699...................................166 T0054466799...................................166 T0054466899...................................166 T0054470110...................................172 T0054470199...................................172 T0054470210...................................172 T0054470299...................................172 T0054470310...................................172 T0054470399...................................172 T0054470410...................................172 T0054470499...................................172 T0054470510...................................172 T0054470599...................................172 T0054470610...................................172 T0054470699...................................172 T0054470710...................................172 T0054470799...................................172 T0054470810...................................172 T0054470899...................................172 T0054470910...................................172 T0054470999...................................172 T0054471010...................................172 T0054471099...................................172 T0054471110...................................173 T0054471199...................................173 T0054471210...................................173 T0054471299...................................173 T0054471310...................................172 T0054471399...................................172 T0054471410...................................173 T0054471499...................................173 T0054471510...................................172 T0054471599...................................172 T0054471610...................................172 T0054471699...................................172 T0054471710...................................172 T0054471799...................................172 T0054471810...................................172 T0054471899...................................172 T0054471999...................................174 T0054472099...................................174 T0054472299...................................174 T0054472310...................................175 T0054472399...................................175 T0054472499...................................175 T0054472599...................................175 T0054472699...................................175 T0054472799...................................175 T0054472899...................................175 T0054473010...................................172 T0054473099...................................172 T0054473190...................................173 T0054473190...................................173 T0054473199...................................173 T0054473290...................................173 T0054473299...................................173 Order No. Page T0054473390...................................173 T0054473399...................................173 T0054474010...................................172 T0054474099...................................172 T0054474110...................................172 T0054474199...................................172 T0054474210...................................172 T0054474299...................................172 T0054474310...................................172 T0054474399...................................172 T0054474410...................................172 T0054474499...................................172 T0054474510...................................172 T0054474599...................................172 T0054480199...................................176 T0054480299...................................176 T0054480399...................................176 T0054480499...................................176 T0054480599...................................176 T0054485010...................................168 T0054485099...................................168 T0054485110...................................168 T0054485199...................................168 T0054485210...................................169 T0054485299...................................169 T0054485310...................................168 T0054485399...................................168 T0054485410...................................169 T0054485499...................................169 T0054485510...................................168 T0054485599...................................168 T0054485610...................................168 T0054485699...................................168 T0054485710...................................168 T0054485799...................................168 T0054485810...................................168 T0054485899...................................168 T0054485910...................................168 T0054485999...................................168 T0054486010...................................168 T0054486099...................................168 T0054486199...................................169 T0054486210...................................168 T0054486299...................................168 T0054486310...................................168 T0054486399...................................168 T0054486410...................................168 T0054486499...................................168 T0054487210...................................169 T0054487299...................................169 T0054487310...................................168 T0054487399...................................168 T0054487410...................................168 T0054487499...................................168 T0054487510...................................169 T0054487599...................................169 T0054488010...................................169 T0054488099...................................169 T0054488110...................................168 T0054488199...................................168 T0054488210...................................168 T0054488299...................................168 T0054488310...................................168 T0054488399...................................168 T0054488410...................................168 T0054488499...................................168 T0054488510...................................168 T0054488599...................................168 T0054488610...................................168 T0054488699...................................168 T0054488710...................................168 T0054488799...................................168 T0054488810...................................169 T0054488899...................................169 T0054488910...................................169 T0054488999...................................169 T0054489010...................................169 T0054489099...................................169 T0054489110...................................169 T0054489199...................................169 T0054489210...................................169 Order No. Page T0054489299...................................169 T0054489310...................................169 T0054489399...................................169 T0054489410...................................169 T0054489499...................................169 T0054489510...................................169 T0054489599...................................169 T0054489610...................................169 T0054489699...................................169 T0054489710...................................169 T0054489799...................................169 T0054489810...................................169 T0054489899...................................169 T0054489910...................................169 T0054489999...................................169 T0054490010...................................169 T0054490099...................................169 T0054490110...................................169 T0054490199...................................169 T0054490210...................................169 T0054490299...................................169 T0054490310...................................169 T0054490399...................................169 T0056103699...................................151 T0056104667...................................189 T0056104668...................................189 T0056104669...................................189 T0056104699...................................151 T0056105699...................................151 T0056109399.....................................90 T0056109699...................................151 T0056400599...................................152 T0056402199...................................152 T0056403799...................................153 T0056405399...................................153 T0058706794...................156, 194, 196 T0058713798.......................72, 83, 203 T0058713799.......................72, 83, 203 T0058720781...........................179, 184 T0058720786...................................187 T0058720787...................................187 T0058720788...................................187 T0058720789...................................187 T0058720794...........................184, 187 T0058720795...................................180 T0058725034.....................................91 T0058725722.....................................91 T0058725726.....................................91 T0058725729.....................................91 T0058725732.....................................91 T0058725736.....................................91 T0058725742.....................................91 T0058727772...................................198 T0058727773...................................198 T0058727774...................................198 T0058727775...................................198 T0058727776...................................198 T0058727777...................................199 T0058727778...................................199 T0058727779...................................199 T0058727780...................................199 T0058727781...................................199 T0058727782...................................199 T0058727783...................................199 T0058727784...................................199 T0058727785...................................199 T0058727786...................................198 T0058727787...................................198 T0058727808...................................199 T0058727821...................................198 T0058727822...................................198 T0058727823...................................198 T0058735050...................................135 T0058735427...................................118 T0058735757...................................132 T0058735835...................................124 T0058735836...........................124, 133 T0058735837...........................124, 133 T0058735838...........................124, 133 T0058735840...................................117 T0058735845...................................115 Order No. Page T0058735855...................................125 T0058735856...................................125 T0058735860...................................123 T0058735863...................................125 T0058735864...................................125 T0058735865...................................135 T0058735866...................................135 T0058735869...................................125 T0058735870...................................125 T0058735871...................................125 T0058735879...................................121 T0058735895...................................122 T0058735909...................................115 T0058735915...................................117 T0058735924...................................123 T0058735936...................................122 T0058735937...................................122 T0058735938...................................122 T0058736804...................................202 T0058736807...................................202 T0058736814...................................202 T0058736818...................................202 T0058736833...................................202 T0058736837...................................202 T0058736838...................................202 T0058736839...................................202 T0058736840...................................201 T0058736841...................................201 T0058736842...................................201 T0058736843...................................201 T0058736867...................................200 T0058736870...................................200 T0058736875...................................203 T0058736880...................................202 T0058736881...................................200 T0058736882...................................200 T0058736883...................................200 T0058736890...................................202 T0058736891...................................202 T0058738850...............................51, 69 T0058744710...................................181 T0058744713.....................................35 T0058744738.....................................35 T0058744795...................................183 T0058744845...................................181 T0058744846...................................181 T0058744875...................................131 T0058744876...................................131 T0058747753...................................204 T0058747763...................................204 T0058747764...................................204 T0058747833...................................204 T0058747848...................................204 T0058747850...................................204 T0058747871...................................204 T0058747874...................................204 T0058747893...................................204 T0058747904...................................204 T0058747906...................................204 T0058747916...................................204 T0058747927...................................204 T0058747935...................................204 T0058747941...................................204 T0058747943...................................204 T0058747945...................................204 T0058747947...................................204 T0058747961...................................204 T0058747977...................................204 T0058747985...................................204 T0058747993...................................204 T0058747999...................................204 T0058748861...................................196 T0058748990.....................................29 T0058750721...................................202 T0058750739...................................203 T0058750741...................................203 T0058750742...................................203 T0058750765...................................200 T0058750770...................................200 T0058750772...................................200 T0058750774...................................200 Order No. Page T0058751710...................................171 T0058751717...................................171 T0058751880.....................................41 T0058754770...................................204 T0058754820...................................204 T0058754836...................................204 T0058754873................................82,89 T0058754887...................................204 T0058754903...................................204 T0058754924................................82,89 T0058754948.....................................83 T0058754967...................................204 T0058754970.....................................83 T0058755741.....................................89 T0058755745.....................................89 T0058755782.....................................83 T0058757898.....................................71 T0058761728...................................198 T0058761730.....................................73 T0058761731.....................................73 T0058761732................................72,73 T0058762036...................................118 T0058762701...................................122 T0058762703...................................123 T0058762724.....................................14 T0058762746...................................119 T0058762747...................................114 T0058762750...................................121 T0058762753...................................120 T0058762755...................................118 T0058762756...................................118 T0058762757...................................116 T0058762758...................................116 T0058762763...................................113 T0058762765...................................119 T0058762766...................................120 T0058762767...................................119 T0058762768...................................118 T0058762769...................................119 T0058762770...................................112 T0058762771...................................121 T0058762774...................................120 T0058762808...................................119 T0058762810...................................135 T0058763709...................................174 T0058763725...................................176 T0058763730.....................................35 T0058763732.....................................37 T0058764726.....................................14 T0058765711............................143,174 T0058765740.....................................35 T0058765758............................142,169 T0058765798...................................131 T0058765799...................................131 T0058765801.......................51,156,196 T0058767701...................................212 T0058767702...................................212 T0058767703...................................212 T0058767704...................................213 T0058767705...................................213 T0058767706...................................213 TAL332CH.........................................229 WLSK200............................................93 WLSK200T18......................................93 WLSK200T38......................................93 WPB1.................................................95 www.labem.pl 389 Numerical Index Order No. Page 547...................................................304 3200.................................321, 323, 332 3231.................................321, 323, 332 3232.................................................321 3303.................................................322 3315.........................................323, 332 3717.........................................323, 332 3740.........................................323, 332 50788...............................................311 024C................................................257 102ACA...........................317, 323, 327, ........................................331, 332, 250 102ACAX.................................250, 230, 103ACA....................250, 317, 327, 330 11N..................................................242 141SAP.............................................255 147A................................................294 147AT...............................................294 1500BSF...........................................296 1503E...............................................297 150SA..............................................251 150SAD............................................251 150SAMB.........................317, 327, 352 150SAMF..................251, 317, 327, 330 1512N..............................................296 151SA..............................................251 1522N..............................................296 1522NA............................................297 1522NB............................................297 15AGS..............................................255 15AGW.............................................255 1884EPCM........................................294 1SA..................................................241 1SASL...............................................241 2041Z...............................................321 2044Z...............................................321 2052E...............................322, 323, 332 20AS................................................240 21SA................................................243 2400KMS..........................................328 2403E...............................................278 2404E...............................................278 2411P.......................................306, 328 2411PD............................................306 2412E...............................326, 328, 377 2422E...............................................277 2432E...............................................277 2442P.......................................307, 326 2443P...............................................307 2470E...............................................279 2475E...............................................279 2476TX.............................................293 2476TX1...........................................292 2477E...............................................278 2482E.......................................328, 279 249CER.............................................243 249SA..............................................243 24SA................................................247 258SA..............................................245 25SA................................................248 29W30.............................................256 29Y30...............................................256 29Y32...............................................256 29Y34...............................................256 29Y36...............................................256 29Y40...............................................256 2ASA........................................329, 331 2ASARU............................................248 2ASASL.....................................248, 326 2ASASLT...........................................248 2SA..................................................245 2SASL...............................................245 3000ESD...........................................320 3000KCESD..............................323, 332 3008ESD...................................323, 332 30SA................................................247 32BSA..............................................252 32BSA20..........................................252 32BSA25..........................................252 3300TPS...........................................329 3305Z.......................................322, 323 390 Order No. Page 3310Z...............................322, 323, 332 3400TSMDU.....................................330 3500TP.............................................331 3600KU............................................326 3714Z.......................................323, 332 3900KC....................................317, 327 39SA................................................251 3CBS.................................................246 3CS...................................................241 3CSA................................................241 3CSASL.............................................241 3CTA.................................................241 3SA..................................329, 331, 241 3SASL...............................................241 40SA................................................251 4SA..................................................244 4SASL...............................................244 500103A..........................................312 500104A..........................................313 500210E...........................................312 503E.................................................282 503ET...............................................293 503ETF.............................................293 504AE..............................................282 505C................................................316 50789Z.............................................311 510AE..............................................308 512E.................................................281 512N................................................281 51SA................................246, 317, 327 51SASL.............................................247 522N................................................281 52ASA..............................................248 530E06.............................................298 530E08.............................................298 530E10.............................................298 530E12.............................................298 530E13.............................................298 530E15.............................................298 530E15.............................................298 530E18.............................................298 530E20.............................................298 531E.................................................305 532N................................................281 53CSA..............................................241 542E.................................................305 543E.................................................304 544D................................................305 544E.................................................305 549E.................................................299 549E10.............................................299 549E12.............................................299 552E.................................................309 552S.........................................309, 318 554A................................................310 554E.................................................310 554TX...............................................311 555E.................................................283 570E.................................................285 572E.................................................283 573E.................................................285 573EB...............................................299 575E.................................................284 576TX...............................................293 576TX1.............................................292 577E.................................................282 582E.................................................283 582EW.............................................283 592E.................................................284 593AE..............................................284 595E.................................................282 595T.................................................292 595TF...............................................292 599E.................................................281 599FO......................................295, 319 599T.................................................291 599TF...............................................291 599TFO.....................................295, 319 5ASA................................................247 5ASASL.............................................247 5BSA................................................246 Order No. Page 5CSA................................................246 5FSA.................................................245 5MBS................................................245 5SA..................................................245 5SASL...............................................245 600ASA............................................254 600JSA.............................................254 608ASA............................................254 612N................................................273 622N................................................273 622NA..............................................274 622NB......................................274, 326 622TX...............................................291 632N................................................273 632NCF....................................274, 295 64SA................................................242 65ASA..............................................247 670E.................................................275 670EP...............................275, 317, 327 670EPF.............................................275 676E.................................................274 776E.................................................274 792E.................................................274 7SA..........................247, 329, 330, 331 7SASL...............................................247 80013C............................................313 808G................................................316 809IC...............................................313 812N................................................287 822N................................................287 884E.................................................288 886E.................................................288 896E.................................................287 91SA................................................254 940AS..............................................253 AAS..................................................242 AASA........................................242, 326 AASASL............................................242 AAZ..................................................242 ACSA................................................240 AM...................................................243 E15AGW...........................................249 E2ASA..............................................249 E3CSA...............................................249 E5SA.................................................249 E7SA.................................................249 EOODSA...........................................249 EOOSA..............................................249 KDS260L...........................................225 M4AS...............................................244 M5S..................................................240 OOBSA.............................................242 OOCSA.............................................242 OODSA.............................................242 OOSA................................................242 OOSASL............................................242 RRS...................................................243 SSSA.................................................243 XB29W301.......................................256 XP600...............................................326 www.labem.pl Numerical Index Order No. Page 600...........................................349, 350 994...................................342, 346, 348 996...................................342, 343, 345 997...................................................342 998...................................................345 999...........................................342, 345 9910.........................................342, 345 9911.........................................342, 345 9912.........................................342, 345 9914.................................................342 9916.................................................342 9920.................................................342 9921.........................342, 343, 349, 350 9921.........................342, 343, 349, 350 9922.........................342, 343, 349, 350 9922.........................342, 343, 349, 350 9923.........................342, 343, 349, 350 9923.........................342, 343, 349, 350 9924.........................342, 343, 349, 350 9924.........................342, 343, 349, 350 9925.........................342, 343, 349, 350 9926.........................342, 343, 349, 350 9938.................................348, 349, 350 9961...........................342, 346.349.350 9962.................................346, 349, 350 9963.................................346, 349, 350 9964.................................346, 349, 350 9965.................................346, 349, 350 9966.................................346, 349, 350 9967.................................346, 349, 350 9968.................................346, 349, 350 9969.................................346, 349, 350 99125.......................................349, 350 99250...............................................345 99312...............................348, 349, 350 99312...............................348, 349, 350 99764.......................342, 343, 349, 350 99764.......................342, 343, 349, 350 99811..............................343, 345, 348, ................................................349, 350 99820..............................342, 343, 348, ................................................349, 350 99821..............................342, 343, 345, ........................................348, 349, 350 99822..............................342, 345, 348, ................................................349, 350 99831...............................................347 99832...............................................347 99964.......................342, 343, 349, 350 100XV..............................................337 101S.................................................337 101SNV............................................337 103S.................................348, 349, 350 170M.......................................337, 348 175M...............................................337 2211P...............................................348 42H..........................................349, 350 46CG........................................349, 350 50CG........................................349, 350 51CG........................................349, 350 53CG........................................349, 350 542E.........................................348, 305 543E.........................................348, 304 54CG........................................349, 350 57CG........................................349, 350 59CG........................................349, 350 612N........................................348, 273 66CG........................................349, 350 812N........................................348, 287 86CG................................348, 349, 350 86NCG..............................................337 9910M.............................346, 349, 350 9910MM..........................................346 9910XTD..................................343, 347 9911MM..........................................346 9915XTD..................................343, 347 991R........................................349, 350 991X...............................342, 343, 344, .......................................345, 346, 347, ........................................348, 349, 350 9920BP............................................344 Order No. Page 9920XTD..........................................347 9921BP............................................344 9922BP............................................344 9923BP............................................344 9924BP............................................344 9925BP............................................344 9925XTD..........................................347 9926BP............................................344 9927XTD..........................................347 9930XTD..........................................347 9945MM..................................346, 348 994MM....................................346, 348 994R................................348, 349, 350 9955MM..................................346, 348 995MM....................................346, 348 996MM....................................346, 348 996XTD............................................347 9971MM..................................344, 348 9971MMBP......................................345 9972MM..................................344, 348 9972MMBP......................................345 9973MM..................................344, 348 9973MMBP......................................345 9973MMBP......................................345 9974MM..................................344, 348 9974MMBP .....................................345 9975MM..................................344, 348 9975MMBP......................................345 99764BP..........................................344 9976MM..................................344, 348 9976MMBP......................................345 9977MM..................................344, 348 9977MMBP......................................345 997MM....................................346, 348 998M...............................................349 998MM....................................346, 348 998XTD............................................347 99964BP..........................................344 999MM....................................346, 348 99MP...............................................342 99PS40.............................................343 99PS40.............................................343 99PS40BP.........................................344 99PS41MM.......................................344 99PS41MMBP..................................345 99PS50.............................................345 99PS51MM.......................................346 99PS60.............................................346 99SPC...............................................343 99X10......................................349, 350 99X5.......................342, 343, 344, 345, ................................346, 348, 349, 350 99XTD7............................................347 AC16C..............................................348 E1.....................................................343 Erop330............................................348 HS10........................................349, 350 HS11........................................349, 350 HS12........................................349, 350 HS14........................................349, 350 HS16........................................349, 350 HS18........................................349, 350 HS6..........................................349, 350 HS8..........................................349, 350 M60.................................338, 349, 350 P0.....................................................339 P1.....................................................339 P10...................................................340 P10MM............................................341 P11...................................................340 P12...................................................340 P141.................................................339 P18...................................339, 349, 350 P181.................................................339 P19...................................339, 349, 350 P2.....................................................339 P20...................................................339 P21...................................................339 P22...................................................339 P23...................................................339 P24...................................................339 Order No. Page P3.....................................................340 P3161...............................................339 P3321.........................................339, 34 P35MM............................................341 P3MM..............................................341 P4.....................................................340 P45MM............................................341 P4MM..............................................341 P5.....................................................340 P5321...............................................339 P55MM............................................341 P5MM..............................................341 P6.....................................................340 P6MM..............................................341 P7.....................................................340 P71...................................................340 P72...................................................340 P73...................................................340 P74...................................................340 P75...................................................340 P76...................................................340 P764.................................................339 P77...................................................340 P78...................................................340 P7MM..............................................341 P8.....................................................340 P8MM..............................................341 P9.....................................................340 PS120...............................340, 349, 350 PS121MM.........................................341 PS88.................................................339 PS89.................................................339 PS90MM...........................................340 R1....................................................343 R144........................................349, 350 R146........................................349, 350 R181........................................349, 350 R184........................................349, 350 R3164......................................349, 350 R3166......................................349, 350 R3323......................................349, 350 R5325..............................................350 S3161.......................................349, 350 S388.........................................349, 350 S5161.......................................349, 350 S5166.......................................349, 350 SB1...........................................349, 350 SX101...............................348, 349, 350 SX102...............................................348 T0016100402...................................348 T0044130000...................................348 T0051304199...................................348 T0054002599...................................348 T0056103699...................................348 T0060403504...................................348 T1.....................................................343 TA2...................................339, 340, 341 TC100ST...........................................349 TCMB100ST......................................350 X1....................................................343 XL10.................................................351 XL12.................................................351 XL14.................................................351 XL16.................................................351 XL17.................................................351 XL18.................................................351 XL20.................................................351 XL21.................................................351 XL24.................................................351 XL25.................................................351 XL27.................................................351 XL3...................................................351 XL4...................................................351 XL5...................................................351 XL50X...............................................351 XL6...................................................351 XL7...................................................351 XL70.................................................351 XL75.................................................338 XL8...................................................351 XL9...................................................351 Order No. Page XN100..............................................336 XN200..............................................336 XN210..............................................336 XNB101............................................336 XNB103............................................336 XNB103B..........................................336 XNB105............................................336 XNB201............................................336 XNB203............................................336 XNB205............................................336 XNS100............................................336 XST100.....................................349, 350 XST101.............................348, 349, 350 XST102.....................................349, 350 www.labem.pl 391 Notes Explosionszeichnungen www.labem.pl 392 www.labem.pl 393 Notes Explosionszeichnungen www.labem.pl 394 GERMANY ITALY USA Weller Tools GmbH Carl-Benz-Strae 2 74354 Besigheim Apex Tool S.r.l. Viale Europa 80 20090 Cusago (MI) Apex Tool Group, LLC 1000 Lufkin Road Apex, NC 27539-8160 Tel: +49 (0)7143 580-0 Fax: +49 (0)7143 580-108 Tel: +39 (02)9033101 Fax: +39 (02 )90394231 Tel: +1 (800)476-3030 Ext. Fax: +1 (800)387-2640 GREAT BRITAIN SWITZERLAND CANADA Apex Tool Group (UK Operations) Ltd 4th Floor Pennine House Washington, Tyne & Wear NE37 1LY Apex Tool Switzerland Sarl Rue de la Roseliere 12 1400 Yverdon-les-Bains Apex Tools - Canada 5925 McLaughlin Rd. Mississauga, Ontario L5R 1B8 Tel: +41 (0) 24 426 12 06 Fax: +41 (0) 24 425 09 77 Tel: +1 (905) 501-4785 Fax: +1 (905) 501-4786 Tel: +44 (0) 191 419 7700 Fax: +44 (0) 191 417 9421 FRANCE CHINA AUSTRALIA Apex Tool Group S.N.C. 25 Avenue Maurice Chevalier B.P. 46 77832 Ozoir-la-Ferriere Cedex Apex Tool Group A-8 Building No. 38 Dongsheng Road Heqing Industrial Park, Pudong Shanghai 201201 Apex Tools Australia P.O. Box 366 519 Nurigong Street Albury, N.S.W. 2640 Tel: +33 (0) 1.64.43.22.00 Fax: +33 (0) 1.64.43.21.62 Tel: +86 (21)60880288 Fax: +86 (21)60880289 Tel: +61 (2)6058-0300 Fax: +61 (2)6021-7403 South East Asia Apex Power Tools India Pvt Ltd Gala No. 1, Plot No. 5 S.No. 234, 235 & 245 India land Global Industrial Park. (Next to Tata Johnson Control) Taluka- Mulsi , Phase -I Hinjawadi Pune (411057) Maharashtra, India toolsindia@apextoolgroup.com (c)2013, Weller-Tools GmbH T005 57 265 01 / 08.13 HOL 3.0 www.weller-tools.com www.labem.pl