7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 2 20 LOC GP ALL RIGHTS RESERVED. 11 11 D 3 1 MATERIAL: CAGE - 0.25mm THICK NICKEL SILVER ALLOY HEATSINK - ALUMINUM HEATSINK CLIP - STAINLESS STEEL EMI SPRING(S) - COPPER ALLOY 2 FINISH: HEATSINK - ELECTROLESS NICKEL HEATSINK CLIP - PASSIVATE EMI SPRING(S) - 0.8um MIN MATTE TIN OVER 0.8um MIN NICKEL, NON-PLATED EDGES PERMISSIBLE. 1 REVISIONS DIST 00 P LTR CAGE ASSEMBLY PIN TYPE HEATSINK CAGE ASSEMBLY FIN TYPE HEATSINK DESCRIPTION DATE DWN APVD E1 ADD PART NUMBER WITH TAPE 27JUL2012 TX AC F REVISED PER ECO-12-021462 10DEC2012 TX AC F1 REVISED PER ECO-13-014600 11OCT2013 PP SH F2 REVISED PER ECO-14-000741 16JAN2014 PP SH HEATSINK CLIP HEATSINK CLIP D 2007464-1 2007464-5 3. MATES WITH SFP MSA COMPLIANT TRANSCEIVERS. 4 PADS AND VIAS CHASSIS GROUND. 5 DATUM AND BASIC DIMENSION ESTABLISHED BY CUSTOMER. 6. MINIMUM PC BOARD THICKNESS: SINGLE SIDED = 1.50mm DOUBLE SIDED = 3.00mm 7 REFERENCE APPLICATION SPEC. 114-13120, HOLE A, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. -C- 14 0.1 PORT OPENING C C H MAX 8.95 0.15 PORT OPENING 9 -C( 3 ) TYP ( 11.5 ) B 8 REFERENCE APPLICATION SPEC. 114-13120, HOLE C, FOR RECOMMENDED DRILL HOLE DIAMETER AND PLATING THICKNESS. 9 DIMENSION APPLIES PRIOR TO INSERTION OF SFP MODULE. 10. CAGE ASSEMBLY, HEATSINK CLIP AND HEATSINK SHIPPED ASSEMBLED. 11 HEAT SINK 1829903-2 1829904-2 1829905-2 2170426-4 2170427-4 2170428-4 REFERENCE PART NUMBERS: = 4.2 HIGH - PCI,PIN TYPE = 6.5 HIGH - SAN,PIN TYPE = 13.5 HIGH - NETWORKING,PIN TYPE = 4.2 HIGH - PCI,PIN TYPE = 6.5 HIGH - SAN,PIN TYPE = 13.5 HIGH - NETWORKING,PIN TYPE APPROXIMATE LOCATION OF DATE CODE ( 48.7 ) B -C- W/O INSULATING TAPE 13.5 W/O INSULATING TAPE 22.8 W/ INSULATING TAPE ( 14.5 ) W/O INSULATING TAPE W/O INSULATING TAPE 12. REMOVED W/O INSULATING TAPE DESCRIPTION A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm MATERIAL 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES 0.1 0.1 0.1 0.05 0.05 FINISH 1 4805 (3/11) TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 13.5 PCI CHK 20NOV2007 APVD 20NOV2007 M.R.SCHMITT R.H.WERTZ 108-2364 APPLICATION SPEC 114-13120 WEIGHT - Customer Drawing 2007464-6 2007464-5 NETWORKING NETWORKING 20NOV2007 2007464-8 PCI 22.8 DWN PRODUCT SPEC - SAN 2007464-4 2007464-3 SAN H MAX Z.M.REAM 2007464-7 15.8 15.8 W/O INSULATING TAPE NETWORKING NETWORKING 22.8 W/O INSULATING TAPE 2007464-9 22.8 13.5 W/ INSULATING TAPE PCI 2007464-2 2007464-1 PART NUMBER APPLICATION A TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY, PRESS-FIT PRESS-FIT, EMI SPRINGS WITH HEATSINK SIZE CAGE CODE A1 00779 DRAWING NO 2007464 SCALE 2 SHEET 1 RESTRICTED TO OF - 4 REV F2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION BY - 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. 1 REVISIONS DIST 00 P LTR - DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - D D C C 2007464-4 AS SHOWN WITH INSULATING TAPE,PIN TYPE HEAT SINK 2007464-1,2,3 WITHOUT INSULATING TAPE,TAPE,PIN TYPE HEAT SINK 2007464-8 AS SHOWN WITH INSULATING TAPE,WITH FIN TYPE HEAT SINK 2007464-5,6,7 WITHOUT INSULATING TAPE,WITH FIN TYPE HEAT SINK B B A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: mm 2007464-9 AS SHOWN MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 0.1 0.05 0.05 DWN 20NOV2007 CHK 20NOV2007 APVD 20NOV2007 Z.M.REAM M.R.SCHMITT R.H.WERTZ PRODUCT SPEC 108-2364 APPLICATION SPEC - 114-13120 WEIGHT - Customer Drawing 4805 (3/11) TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY, PRESS-FIT PRESS-FIT, EMI SPRINGS WITH HEATSINK SIZE CAGE CODE A1 00779 DRAWING NO 2007464 SCALE 2 SHEET 2 RESTRICTED TO OF - 4 REV F2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR DESCRIPTION DATE SEE SHEET 1 - DWN APVD - - - 15.45 4X R 0.3 MAX EACH CUTOUT 3.2 20X 10.4 D 16.25 ( 10.17 ) 20X RECOMMENDED BEZEL CUTOUT SCALE 4:1 0.05 5 D 0.03 PIN #20 PIN #1 +0.10 0.23 -0.14 TOP OF PC BOARD TO INSIDE OF BEZEL MIN 0.5 2 7.1 RECOMMENDED BEZEL AND PC BOARD ORIENTATION SCALE 4:1 3.5 0.3 BACK OF BEZEL TO FRONT OF PC BOARD 3.33 10.925 8.13 2.8 10.525 ( 11.93 ) ( 9.6 ) 2.8 X 34.5 3X 10 C 5 THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED) Y 5 Y.YY ( 1.05 ) 4 ( 2.5 7 C 0.85 ) 4 1.55 8 PIN #11 0.9 0.05 2 HOLES PLATING REQUIRED 2.5 B 0.8 PIN #10 7.2 PLATING REQUIRED CROSS-HATCHED AREA DENOTES COMPONENT AND TRACE KEEP-OUT (EXCEPT CHASSIS GROUND) 18X DETAIL A SCALE 8:1 A 5.68 8.58 B 11.08 9.6 14.25 11.925 4.8 16.25 9X 4 11X o2 n 0.95 0.05 PLATING OPTIONAL 10X ( 4 11X 2 1.05 ) 4 7 5 PLATING REQUIRED SEE DETAIL A 10 26.8 A B 6X 41.3 A THIS DRAWING IS A CONTROLLED DOCUMENT. 3X 42.3 DIMENSIONS: mm RECOMMENDED PCB LAYOUT SCALE 7:1 4805 (3/11) MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 0.1 0.05 0.05 DWN 20NOV2007 CHK 20NOV2007 APVD 20NOV2007 Z.M.REAM M.R.SCHMITT R.H.WERTZ PRODUCT SPEC 108-2364 APPLICATION SPEC - 114-13120 WEIGHT - Customer Drawing TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY, PRESS-FIT PRESS-FIT, EMI SPRINGS WITH HEATSINK SIZE CAGE CODE A1 00779 DRAWING NO 2007464 SCALE 2 SHEET 3 RESTRICTED TO OF - 4 REV F2 7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC GP ALL RIGHTS RESERVED. BY - 1 REVISIONS DIST 00 P LTR - 15.45 DESCRIPTION DATE SEE SHEET 1 DWN APVD - - - 4X R 0.3 MAX EACH CUTOUT 3.2 ( 10.17 ) 10.4 20X 2 7.1 5 0.05 PIN #20 D 20X +0.10 -0.14 TOP OF PC BOARD TO INSIDE OF BEZEL 0.5 D 0.03 0.23 16.25 3.5 0.3 BACK OF BEZEL TO FRONT OF PC BOARD RECOMMENDED BEZEL CUTOUT SCALE 4:1 3.33 8.13 ( 11.93 ) 34.5 THIS AREA DENOTES COMPONENT KEEP-OUT (TRACES ALLOWED) Y ( 5 C PIN #1 2.8 10.925 X 5 RECOMMENDED BEZEL AND PC BOARD ORIENTATION SCALE 4:1 Y.YY 1.05 ) 4 2.8 7.2 2.5 ( 2.5 0.85 ) 4 8 18X PLATING REQUIRED 0.8 PIN #11 PIN #10 SEE DETAIL B ( 9.6 ) 3X 10 7 PLATING REQUIRED 10.525 B 1.55 A C 0.05 0.9 2 HOLES DETAIL B SCALE 8:1 1.625 5.68 6.825 11.08 12.625 14.25 11.925 8.58 10.325 9.6 4.8 16.25 B B 4 11X 9X o2 4 11X 0.95 0.05 PLATING OPTIONAL o2 10X 3.325 ( 1.05 ) 4 7 PLATING REQUIRED 8.825 5 23 10 26.8 6X 41.3 4X 42.3 A A THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONS: RECOMMENDED PCB LAYOUT FOR WITH INSULATING TAPE PART SCALE 8:1 mm MATERIAL TOLERANCES UNLESS OTHERWISE SPECIFIED: 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES FINISH 0.1 0.1 0.1 0.05 0.05 DWN 20NOV2007 CHK 20NOV2007 APVD 20NOV2007 Z.M.REAM M.R.SCHMITT R.H.WERTZ PRODUCT SPEC 108-2364 APPLICATION SPEC - 114-13120 WEIGHT - Customer Drawing 4805 (3/11) TE Connectivity NAME SFP+ 1X1 CAGE ASSEMBLY, PRESS-FIT PRESS-FIT, EMI SPRINGS WITH HEATSINK SIZE CAGE CODE A1 00779 DRAWING NO 2007464 SCALE 2 SHEET 4 RESTRICTED TO OF - 4 REV F2 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 2007464-3