MS75008-22 - Vishay Presicion Group

IM

Vishay Dale

Document Number 34030

Revision 18-Oct-04

www.vishay.com

8For technical questions, contact Magnetics@vishay.com

Inductors

Military, MIL-PRF-15305 Qualified, Type LT

and Commercial, Molded

FEATURES

•Wide inductance range in small package.

•Flame retardant coating.

•Precision performance, excellent reliability, sturdy construction.

•Epoxy molded construction provides superior moisture

protection.

INDUCTANCE RANGE AND MILITARY STANDARD

MODEL TO CLASS

GRADE MILITARY

STANDARD

CLASSIFICATION

FROM

INDUCTANCE RANGE

Mil. Range in bold face

—

B

A

B

A

—

B

A

—

A

—

1

—

1

—

1

100µH

0.082µH

1µH

27µH

1000µH

4.7µH

33µH

240µH

1800µH

2.7µH

27µH

220µH

1000µH

3600µH

150µH

10,000µH

0.10µH

0.022µH

0.10µH

1.2µH

33µH

0.15µH

5.6µH

36µH

270µH

0.10µH

3.3µH

33µH

270µH

1100µH

68µH

3900µH

IM-1

IM-2

IM-4

IM-6

IM-8

IM-9

IM-10

—

MS75083

MS75084

MS75085

MS18130

MS14046

MS90538

—

MS75008 Not QPL'd

MS75101

—

MS90539 Not QPL'd

MS90540 Not QPL'd

MS14047 Not QPL'd

MS90541 Not QPL'd

ELECTRICAL SPECIFICATIONS

Inductance Tolerance: ± 1%, ± 3%, ± 5%, ± 10%,

± 20%. Other tolerances available on request.

Insulation Resistance: 1000 Megohm minimum per

MIL-STD-202, Method 302, Test Condition B.

Dielectric Strength: Per MIL-STD-202, Method 301:

1000 VAC for IM-2, -4, -6, -8, -9 and -10.

200 VAC for IM-1.

MECHANICAL SPECIFICATIONS

Terminal Strength: Per MIL-STD-202, Method 211,

Test Condition A: For IM-1, 3 pounds pull.

For IM-2, -4, -6, -8, -9 and -10, 5 pounds pull and twist.

Weight: IM-1 = .25 gram maximum.

IM-2 = .30 gram maximum.

IM-4 = .65 gram maximum.

IM-6 = .95 gram maximum.

IM-8 = 1.5 gram maximum.

IM-9 = 2.0 gram maximum.

IM-10 = 2.5 gram maximum.

MATERIAL SPECIFICATIONS

Encapsulant: Epoxy.

Standard Terminals: IM-1 and IM-2, 24 AWG;

IM-4, IM-6 and IM-9, 22 AWG; IM-8, 21 AWG;

and IM-10, 20 AWG, tinned copper.

TEST EQUIPMENT*

•H/P 4342A Q-Meter.

•Measurements Corporation Megacycle Meter, Model 59.

•Wheatstone bridge.

*Test procedures per MIL-PRF-15305.

MODEL

IM-1

IM-2

IM-4

IM-6

IM-8

IM-9

IM-10

Maximum

Minimum

Maximum

Minimum

Maximum

Minimum

Maximum

Minimum

Maximum

Minimum

Maximum

Minimum

Maximum

Minimum

A (Dia.)

0.086 [2.18]

0.070 [1.78]

0.105 [2.67]

0.085 [2.16]

0.165 [4.19]

0.145 [3.68]

0.200 [5.08]

0.180 [4.57]

0.225 [5.72]

0.205 [5.21]

0.260 [6.60]

0.240 [6.10]

0.250 [6.35]

0.230 [5.84]

B

0.210 [5.33]

0.190 [4.83]

0.260 [6.60]

0.240 [6.10]

0.385 [9.78]

0.365 [9.27]

0.450 [11.43]

0.430 [10.92]

0.570 [14.48]

0.550 [13.97]

0.570 [14.48]

0.550 [13.97]

0.750 [19.05]

0.730 [18.54]

C (Typ.)

1.62 [41.15]

1.38 [35.05]

1.63 [41.40]

1.25 [31.75]

1.63 [41.40]

1.25 [31.75]

1.63 [41.40]

1.25 [31.75]

1.63 [41.40]

1.25 [31.75]

1.63 [41.40]

1.25 [31.75]

1.63 [41.40]

1.25 [31.75]

DIMENSIONS in inches [millimeters]

B

C

Typ.

D

Dia.

A Dia.

D (Dia.)

0.0215 [.546]

0.0185 [.470]

0.0215 [.546]

0.0185 [.470]

0.027 [.686]

0.023 [.584]

0.027 [.686]

0.023 [.584]

0.030 [.762]

0.026 [.660]

0.027 [.686]

0.023 [.584]

0.034 [.864]

0.030 [.762]

TEST

Barometric Pressure

Thermal Shock

Flammability

Overload

Low Temperature

Storage

Resistance to

Soldering Heat

Resistance to

Solvents

CONDITIONS

Test Condition C

Test Condition A-1

—

Test Condition A

—

SPECIFICATIONS

MIL-STD-202,

Method 105

MIL-STD-202,

Method 107

MIL-STD-202,

Method 111

MIL-PRF-15305

MIL-STD-202,

Method 210

MIL-STD-202,

Method 215

ENVIRONMENTAL PERFORMANCE

Document Number 34030

Revision 18-Oct-04 www.vishay.com

9

IM

Vishay Dale

For technical questions, contact Magnetics@vishay.com

STANDARD ELECTRICAL SPECIFICATIONS

NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.

NOTE: Products with dashes instead of Military Standard value and type designations are not qualified.

*Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.

MODEL IND.

(µH) TOL. MIL.

STD. MIL.

TYPE Q

MIN.

TEST FREQ.

L & Q

(MHz)

SELF- RESONANT*

FREQ. MIN.

(MHz)

DCR

MAX.

(Ohms)

RATED**

DC CURRENT

(mA)

PHENOLIC CORE

IRON CORE

PHENOLIC CORE

IRON CORE

895

835

760

705

645

525

460

420

410

510

485

465

435

410

310

290

257

236

198

178

150

130

122

104

95

126

118

112

105

100

95

83.5

76

69

64

54.5

52

2400

2200

2000

1900

1800

1700

1500

1400

1350

1270

1200

1105

1025

960

815

700

650

545

495

415

385

590

535

455

395

355

270

250

230

0.13

0.15

0.18

0.21

0.25

0.38

0.49

0.59

0.62

0.18

0.20

0.22

0.25

0.28

0.49

0.56

0.72

0.85

1.2

1.5

2.1

2.8

3.2

4.4

5.2

3.0

3.4

3.8

4.3

4.7

5.2

6.8

8.2

10.0

11.5

16.0

17.5

0.025

0.03

0.035

0.04

0.045

0.05

0.06

0.07

0.08

0.09

0.10

0.12

0.14

0.16

0.22

0.30

0.35

0.50

0.60

0.85

1.0

0.18

0.22

0.30

0.40

0.55

0x.85

1.0

1.2

680.0

650.0

560.0

540.0

500.0

440.0

410.0

380.0

340.0

250.0

215.0

200.0

190.0

170.0

150.0

135.0

130.0

110.0

100.0

95.0

88.0

78.0

69.0

52.0

47.0

31.0

26.0

23.0

20.0

17.0

15.0

13.5

12.5

11.5

10.5

10.0

9.5

900.0

875.0

850.0

825.0

800.0

775.0

750.0

725.0

680.0

640.0

600.0

550.0

510.0

430.0

410.0

365.0

330.0

300.0

275.0

250.0

230.0

150.0

140.0

125.0

115.0

100.0

90.0

80.0

75.0

25.0

7.9

2.5

50.0

25.0

7.9

35

30

25

40

35

40

45

50

55

45

40

45

50

40

38

35

33

30

28

25

28

30

37

45

—

LT4K

339

340

341

342

343

344

345

346

347

348

349

350

351

LT10K

061

062

063

064

065

066

067

068

—

MS75083

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

MS75084

-01

-02

-03

-04

-05

-06

-07

-08

± 10%

± 20%

± 10%

0.10

0.12

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10.0

12.0

15.0

18.0

22.0

27.0

33.0

39.0

47.0

56.0

68.0

82.0

100.0

0.022

0.027

0.033

0.039

0.047

0.056

0.068

0.082

0.10

0.12

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

IM-1

IM-2

Inductors, Military, MIL-PRF-15305 Qualified,

Type LT and Commercial, Molded

IM

Vishay Dale

Document Number 34030

Revision 18-Oct-04

www.vishay.com

10 For technical questions, contact Magnetics@vishay.com

STANDARD ELECTRICAL SPECIFICATIONS

NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.

NOTE: Products with dashes instead of Military Standard value and type designations are not qualified.

*Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.

MODEL IND.

(µH) TOL. MIL.

STD. MIL.

TYPE Q

MIN.

TEST FREQ.

L & Q

(MHz)

SELF-RESONANT*

FREQ. MIN.

(MHz)

DCR

MAX.

(Ohms)

RATED**

DC CURRENT

(mA)

FERRITE CORE

IRON CORE PHENOLIC CORE IRON CORE

IM-2

IM-4

5.6

6.8

8.2

10.0

12.0

15.0

18.0

22.0

27.0

33.0

39.0

47.0

56.0

68.0

82.0

100.0

120.0

150.0

180.0

220.0

270.0

330.0

390.0

470.0

560.0

680.0

820.0

1000.0

0.15

0.22

0.33

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10.0

12.0

15.0

18.0

22.0

27.0

33.0

± 10%

± 20%

± 10%

MS75084

-09

-10

-11

-12

-13

-14

-15

-16

-17

MS75085

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

-14

-15

-16

-17

-18

-19

MS18130

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

-14

-15

-16

MS14046

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

LT10K

069

070

071

072

073

074

075

076

077

LT10K

078

079

080

081

082

083

084

085

086

087

088

089

090

091

092

093

094

095

096

LT4K

074

075

076

077

078

079

080

081

082

083

084

085

086

087

088

089

LT10K

128

129

130

131

132

133

134

135

136

137

50

55

45

40

50

45

50

30

50

45

50

33

45

50

55

65

75

60

65

7.9

2.5

0.79

25.0

7.9

2.5

65.0

60.0

55.0

50.0

40.0

35.0

30.0

25.0

20.0

24.0

22.0

20.0

18.0

15.0

14.0

13.0

12.0

11.0

10.0

9.0

8.0

7.0

6.5

6.0

5.0

4.0

3.8

3.4

525.0

450.0

360.0

310.0

280.0

250.0

220.0

200.0

180.0

160.0

150.0

135.0

120.0

110.0

100.0

90.0

60.0

55.0

50.0

45.0

42.0

40.0

34.0

30.0

25.0

19.0

1.8

2.0

2.7

3.7

2.7

2.8

3.1

3.3

3.5

3.4

3.6

4.5

5.7

6.7

7.3

8.0

13.0

15.0

17.0

21.0

25.0

28.0

35.0

42.0

46.0

60.0

65.0

72.0

0.03

0.055

0.09

0.12

0.135

0.15

0.22

0.29

0.42

0.50

0.65

0.95

1.20

2.0

2.30

2.60

0.32

0.50

0.60

0.90

1.10

1.40

2.25

2.50

2.60

3.0

185

175

155

130

155

150

145

140

135

130

125

110

100

92

88

84

66

61

57

52

47

45

40

36

35

30

29

28

2450

1810

1400

1225

1150

1100

900

785

650

600

525

435

385

300

280

260

495

395

360

290

265

240

185

175

170

165

Inductors, Military, MIL-PRF-15305 Qualified,

Type LT and Commercial, Molded

Document Number 34030

Revision 18-Oct-04 www.vishay.com

11

IM

Vishay Dale

For technical questions, contact Magnetics@vishay.com

STANDARD ELECTRICAL SPECIFICATIONS

NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.

NOTE: Products with dashes instead of Military Standard value and type designations are not qualified.

*Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.

IND.

(µH)

36.0

39.0

43.0

47.0

51.0

56.0

62.0

68.0

75.0

82.0

91.0

100.0

110.0

120.0

130.0

150.0

160.0

180.0

200.0

220.0

240.0

270.0

300.0

330.0

360.0

390.0

430.0

470.0

510.0

560.0

620.0

680.0

750.0

820.0

910.0

1000.0

1100.0

1200.0

1300.0

1500.0

1600.0

1800.0

0.10

0.12

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

TOL.

± 5%

± 20%

± 10%

MODEL

IM-4

IM-6

MIL.

STD.

MS90538

-1

-2

-3

-4

-5

-6

-7

-8

-9

-10

-11

-12

-13

-14

-15

-16

-17

-18

-19

-20

-21

—

MS75008

—

-21

—

-22

—

-23

—

-24

-25

-26

-27

-28

-29

-30

-31

-32

-33

MIL.

TYPE

LT10K

001

002

003

004

005

006

007

008

009

010

011

012

013

014

015

016

017

018

019

020

021

—

LT4K

—

027

—

028

—

029

—

030

031

032

033

034

035

036

037

038

039

Q

MIN.

60

55

50

60

65

55

30

55

50

45

40

30

TEST FREQ.

L & Q

(MHz)

2.5

0.79

0.25

25.0

7.9

SELF-RESONANT*

FREQ. MIN.

(MHz)

15.5

14.5

13.7

13.0

12.7

12.0

11.5

11.0

10.5

10.3

10.0

9.5

8.9

8.7

8.5

8.0

7.5

7.0

6.5

6.2

5.9

5.7

5.4

5.1

4.8

4.5

4.2

3.9

3.7

3.5

3.3

3.1

2.9

2.7

2.5

2.3

2.1

2.0

1.9

1.8

1.7

1.6

510.0

450.0

415.0

380.0

350.0

320.0

300.0

270.0

250.0

210.0

200.0

180.0

170.0

150.0

140.0

120.0

DCR

MAX.

(Ohms)

2.50

2.60

2.70

2.75

2.85

3.0

3.15

3.30

3.70

3.90

4.30

4.50

4.90

5.20

5.45

6.05

6.40

6.75

7.10

7.45

7.80

11.0

11.5

12.0

15.5

16.3

17.1

17.9

18.8

24.7

25.9

27.2

28.6

30.0

31.5

33.1

43.5

45.7

49.0

52.5

54.0

56.7

.020

.025

.030

.035

.050

.065

.080

.085

.125

.150

.205

.290

.400

.485

.740

.970

1.20

RATED**

DC CURRENT

(mA)

180

176

172

170

167

164

160

156

147

143

136

133

128

124

121

114

111

108

106

103

101

129

125

123

108

105

102

100

98

85

83

81

79

77

76

74

64

63

61

59

58

56

3600

3300

3000

2900

2800

2400

2000

1800

1700

1450

1300

1100

930

785

700

580

505

460

IRON CORE

PHENOLIC CORE

(Not QPL'd)

Inductors, Military, MIL-PRF-15305 Qualified,

Type LT and Commercial, Molded

IM

Vishay Dale

Document Number 34030

Revision 18-Oct-04

www.vishay.com

12 For technical questions, contact Magnetics@vishay.com

STANDARD ELECTRICAL SPECIFICATIONS

MODEL

NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.

NOTE: Products with dashes instead of Military Standard value and type designations are not qualified.

*Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.

IND.

(µH) TOL. MIL.

STD. MIL.

TYPE Q

MIN.

TEST FREQ.

L & Q

(MHz)

SELF-RESONANT*

FREQ. MIN.

(MHz)

DCR

MAX.

(Ohms)

RATED**

DC CURRENT

(mA)

IRON CORE

(Not QPL'd)

IM-6

IM-8

3.3

3.9

4.7

5.6

6.8

8.2

10.0

12.0

15.0

18.0

22.0

27.0

33.0

39.0

47.0

56.0

68.0

82.0

100.0

120.0

150.0

180.0

220.0

270.0

300.0

330.0

360.0

390.0

430.0

470.0

510.0

560.0

620.0

680.0

750.0

820.0

910.0

1000.0

1100.0

1200.0

1300.0

1500.0

1600.0

1800.0

2000.0

2200.0

2400.0

2700.0

3000.0

3300.0

3600.0

± 10%

± 5%

MS75101

-01

-02

-03

-04

-05

-06

-07

-08

-09

-10

-11

-12

—

MS90539

-01

-02

-03

-04

-05

-06

-07

-08

-09

-10

-11

-12

-13

-14

-15

MS90540

-01

-02

-03

-04

-05

-06

-07

-08

-09

-10

-11

-12

-13

LT10K

169

170

171

172

173

174

175

176

177

178

179

180

—

LT10K

022

023

024

025

026

027

028

029

030

031

032

033

034

035

036

LT10K

037

038

039

040

041

042

043

044

045

046

047

048

049

30

50

55

60

65

75

65

60

65

70

LT10K

7.9

2.5

0.79

0.25

70.0

65.0

60.0

50.0

48.0

42.0

36.0

30.0

24.0

22.0

20.0

18.0

16.0

15.0

12.0

10.0

8.0

6.0

5.4

5.0

4.7

5.6

5.3

5.0

4.7

4.5

4.3

4.0

3.8

3.6

3.5

3.4

3.3

3.1

2.9

2.8

2.7

2.6

2.4

2.3

2.2

2.1

2.0

1.9

1.8

1.7

1.6

1.5

0.140

0.155

0.210

0.280

0.375

0.440

0.605

1.05

1.20

1.95

2.20

2.75

3.5

3.8

4.0

4.4

4.7

5.3

6.0

5.0

5.8

6.6

7.4

8.2

8.7

9.1

9.6

10.0

10.6

11.1

11.6

12.3

13.0

13.7

14.4

15.1

15.8

16.5

21.0

22.0

23.0

25.0

26.0

28.0

29.0

30.0

31.0

33.0

35.0

38.0

40.0

990

870

745

645

560

540

440

370

310

255

240

205

185

176

170

164

156

143

133

124

118

114

112

110

107

105

102

100

97

95

93

91

88

85

83

81

79

78

76

75

72

70

68

67

66

64

62

61

58

57

STANDARD ELECTRICAL SPECIFICATIONS

Inductors, Military, MIL-PRF-15305 Qualified,

Type LT and Commercial, Molded

Document Number 34030

Revision 18-Oct-04 www.vishay.com

13

IM

Vishay Dale

For technical questions, contact Magnetics@vishay.com

MODEL

IM-9

IM-10

NOTE: Listing of Military Standard does not imply qualification. Contact factory for latest government QPL information.

NOTE: Products with dashes instead of Military Standard value and type designations are not qualified.

*Measured with full length lead. **Rated DC current based on maximum temperature rise as shown in table.

IND.

(µH)

68.0

82.0

100.0

120.0

150.0

3900.0

4300.0

4700.0

5000.0

5600.0

6200.0

6800.0

7500.0

8200.0

9100.0

10000.0

TOL.

± 10%

± 5%

MIL.

STD.

MS14047

-01

-02

-03

-04

-05

MS90541

-01

-02

-03

-04

-05

-06

-07

-08

-09

-10

-11

MIL.

TYPE

LT10K

138

139

140

141

142

LT10K

050

051

052

053

054

055

056

057

058

059

060

Q

MIN.

70

65

75

80

TEST FREQ.

L & Q

(MHz)

2.5

0.79

0.25

SELF-RESONANT*

FREQ. MIN.

(MHz)

13.0

11.7

10.7

9.3

8.3

1.45

1.40

1.35

1.30

1.25

1.20

1.15

1.10

1.05

1.0

0.95

DCR

MAX.

(Ohms)

3.3

3.5

3.8

4.7

5.3

44.0

46.0

48.0

50.0

53.0

56.0

59.0

62.0

65.0

68.0

72.0

RATED**

DC CURRENT

(mA)

168

162

155

142

132

61

59

58

57

56

54

52

51

50

49

47

0.10µH to .47µH = 35°C at + 90°C ambient

0.56µH to 1000µH = 15°C at + 90°C ambient

0.022µH to 1.0µH = 35°C at + 90°C ambient

1.2µH to 27µH = 15°C at + 90°C ambient

33µH to 1000µH = 15°C at + 90°C ambient

0.15µH to 4.7µH = 35°C at + 90°C ambient

5.6µH to 33µH = 15°C at + 90°C ambient

36µH to 240µH = 15°C at + 90°C ambient

270µH to 1800µH = 35°C at + 90°C ambient

0.1µH to 2.7µH = 35°C at + 90°C ambient

3.3µH to 1000µH = 15°C at + 90°C ambient

= 15°C at + 90°C ambient

OPERATING

TEMPERATURE RANGE

- 55°C to + 125°C

- 55°C to + 105°C

- 55°C to + 125°C

- 55°C to + 105°C

- 55°C to + 125°C

- 55°C to + 105°C

- 55°C to + 125°C

- 55°C to + 105°C

MAXIMUM TEMPERATURE RISE

ORDERING INFORMATION

ORDERING INFORMATION - MILITARY PART NUMBER

± 10%

INDUCTANCE TOLERANCE

IM-2

MODEL

10µH

INDUCTANCE

VALUE

MS75084

MILITARY STANDARD

072

ID NUMBER

- 12

INDUCTANCE

VALUE

K

FAMILY

10

GRADE AND CLASS

LT

TYPE

IM-1

IM-2

IM-4

IM-6

IM-8, IM-9, IM-10

IRON CORE

(Not QPL'd)

IRON CORE

STANDARD ELECTRICAL SPECIFICATIONS

(Not QPL'd)

OR

Inductors, Military, MIL-PRF-15305 Qualified,

Type LT and Commercial, Molded

Legal Disclaimer Notice

Vishay

Document Number: 91000 www.vishay.com

Revision: 08-Apr-05 1

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,

or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's

terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness

for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify Vishay for any damages resulting from such improper use or sale.