https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page1/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Replacement plug for type 3 device protection from the PLUGTRAB SEC T3 product range. 230 V nominal
voltage.
Your advantages
Varistor-based device protection
Can be used without separate backup fuse thanks to integrated overcurrent protection
Pluggable
Optical status indicator via LED
Plugs can be checked with CHECKMASTER 2
Key Commercial Data
Packing unit 1 pc
GTIN
GTIN 4046356939768
Weight per Piece (excluding packing) 40.000 g
Custom tariff number 85363030
Country of origin Germany
Technical data
Dimensions
Height 60.9 mm
Width 17.5 mm
Depth 44.8 mm
Horizontal pitch 1 Div.
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page2/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Technical data
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -40 °C ... 80 °C
Ambient temperature (storage/transport) -40 °C ... 80 °C
Altitude ≤ 2000 m (amsl (above mean sea level))
Permissible humidity (operation) 5 % ... 95 %
Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation) 5g (10 ... 150 Hz/20 cycles/axis/X, Y, Z)
General
EN type T3
IEC power supply system TN-S
TT
Mode of protection L-N
L-PE
N-PE
(L+) - (L-)
(L+/L-) - PE
Mounting type on base element
Color light grey RAL7035
Housing material PA 6.6-FR 20% GF
PA 6.6-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type Male
Number of positions 2
Surge protection fault message optical
Protective circuit
Nominal voltage UN230VAC(TN-S)
230VAC(TT - only in use with RCD)
Nominal frequency fN50 Hz (60Hz)
Maximum continuous voltage UC264 VAC
230 VDC
Residual current IPE ≤ 5 µA
Nominal discharge current In (8/20) µs 3 kA
Standby power consumption PC≤ 275 mVA (at UREF)
≤ 300 mVA (at UC)
Reference test voltage UREF 255 VAC
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page3/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Technical data
Protective circuit
Combination wave UOC 6 kV
Voltage protection level Up (L-N) ≤ 1.35 kV
Voltage protection level Up (L-PE) ≤ 1.5 kV
Voltage protection level Up (N-PE) ≤ 1.5 kV
TOV behavior at UT (L-N) 440 VAC (5s / withstand mode)
440 VAC (120min / withstand mode)
TOV behavior at UT (L-PE) 440 VAC (5s / withstand mode)
440 VAC (120min / withstand mode)
1455 VAC (200ms / safe failure mode)
TOV behavior at UT (N-PE) 1200 VAC (200ms / safe failure mode)
Response time tA (L-N) ≤ 25 ns
Response time tA (L-PE) ≤ 100 ns
Response time tA (N-PE) ≤ 100 ns
Short-circuit current rating ISCCR 1.5 kA AC
0.25 kA DC
Connection data
Connection method pluggable
UL specifications
SPD Type 4CA
Maximum continuous operating voltage MCOV 255 VAC
230 VDC
Nominal voltage 230 VDC
Mode of protection L-N
L-G
N-G
(L+) - (L-)
(L+) - G
(L-) - G
Power distribution system Single phase
Nominal frequency 50/60Hz
Measured limiting voltage MLV (L-N) 1290 V
Measured limiting voltage MLV (L-G) 1310 V
Measured limiting voltage MLV (N-G) 1310 V
Measured limiting voltage MLV (L+) - (L-) 1290 V
Measured limiting voltage MLV (L+) - G 1310 V
Measured limiting voltage MLV (L-) - G 1310 V
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page4/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Technical data
UL specifications
Nominal discharge current In3 kA
Standards and Regulations
Standards/specifications IEC61643-11 2011
EN61643-11 2012
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
L
N PE
Dimensional drawing
17,544,8
51,4
60,9
Classifications
eCl@ss
eCl@ss 4.0 27130800
eCl@ss 4.1 27130800
eCl@ss 5.0 27130800
eCl@ss 5.1 27130800
eCl@ss 6.0 27130800
eCl@ss 7.0 27130806
eCl@ss 9.0 27130890
ETIM
ETIM 6.0 EC000942
ETIM 7.0 EC000942
UNSPSC
UNSPSC 13.2 39121620
UNSPSC 18.0 39121620
UNSPSC 19.0 39121620
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page5/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Classifications
UNSPSC
UNSPSC 20.0 39121620
UNSPSC 21.0 39121620
Approvals
Approvals
Approvals
CSA / GL / CCA / KEMA-KEUR / IECEE CB Scheme / EAC / UL Recognized
Ex Approvals
UL Recognized
Approval details
CSA http://www.csagroup.org/services-industries/product-listing/ 70056020
GL https://approvalfinder.dnvgl.com/ 14588-15 HH
CCA NTR-NL 7399
KEMA-KEUR http://www.dekra-certification.com 2173868.01
IECEE CB Scheme http://www.iecee.org/ NL-35777
EAC RU C-
DE.*09.B.00169
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page6/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Approvals
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181
Accessories
Accessories
Device marking
Label-EML (20XE)R-0803452
Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field
size: continuous x 20mm
Label-EML (20XE)R YE-0803453
Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field
size: continuous x 20mm
End block
End clamp-CLIPFIX 35-3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
Marker pen
https://www.phoenixcontact.com/us/products/2905235
06/20/2021Page7/7
Type 3 surge protection plug-PLT-SEC-T3-230-P-2905235
Accessories
Marker pen-X-PEN 0,35-0811228
Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm
Additional products
Type 3 surge protection base element-PLT-SEC-T3-BE-2905557
Base element for protective plugs from the PLUGTRAB SEC product series with remote indication contact.
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com