Thyristor Modules PSKA 96 ITRMS = 2x180 A
Thyristor/Thyristor Modules ITAVM = 2x105 A
VRRM = 600-1800V
Preliminary Data Sheet
Features
Isolation voltage 3600 V
Planar glass passivated chips
Low forward voltage drop
Leads suitable for PC board
soldering
UL registered, E 148688
Applications
DC motor control
Light and temperature control
Softstart AC motor controller
Solid state switches
Advantages
Easy to mount with two screws
Space and weight savings
Improved temperature and power
cycling capability
High power density
Small and light weight
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
ECO-PACTM 2
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
VRSM VRRM Type
VDSM VDRM
(V) (V)
700 600 PSKA 96/06
900 800 PSKA 96/08
1300 1200 PSKA 96/12
1500 1400 PSKA 96/14
1700 1600 PSKA 96/16
1900 1800 PSKA 96/18
Symbol Test Conditions Maximum Ratings
Data according to IEC 60747 refer to a single thyristor unless otherwise stated
ITRMS 180 A
ITAVM TC = 85 °C, 180° sine 105 A
ITSM TVJ = 45 °C t = 10 ms (50 Hz), sine 2250 A
VR = 0 t = 8.3 ms (60 Hz), sine 2400 A
TVJ = 125 °C t = 10 ms (50 Hz), sine 2000 A
VR = 0 t = 8.3 ms (60 Hz), sine 2150 A
i2 dt TVJ = 45 °C t = 10 ms (50 Hz), sine 25300 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 23900 A²s
TVJ = 125 °C t = 10 ms (50 Hz), sine 20000 A²s
VR = 0 t = 8.3 ms (60 Hz), sine 19100 A²s
(di/dt)cr TVJ = 125 °C repetitive, IT = 250 A 150 A/µs
f=50Hz, tP=200µs
VD=2/3VDRM
IG=0.45 A non repetitive,IT = ITAV M 500 A/µs
diG/dt=0.45A/µs
(dv/dt)cr TVJ = 125 °C VD=2/3VDRM 1000 V/µs
RGK= , method 1 (linear voltage rise)
PGM TVJ = 125 °C tP=30µs 10 W
IT =ITAV M tP=300µs 5 W
PGAVM 0.5 W
VRGM 10 V
TVJ -40... + 125 °C
TVJM 125 °C
Tstg -40... + 125 °C
VISOL 50/60 Hz, RMS t = 1 min 3000 V
IISOL 1 mA t = 1 s 3600 V
MdMounting torque (M4) 1.5 - 2.0 Nm
14 - 18 lb.in.
Weight typ. 24 g
VX-1 8
AC-1
E- 3
K- 1 2
GI-10
http://store.iiic.cc/
ECO-PACTM 2
POWERSEM GmbH, Walpersdorfer Str. 53
D - 91126 Schwabach
Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20
2005 POWERSEM reserves the right to change limits, test conditions and dimensions
Symbol Test Conditions Characteristic Value
ID,IRTVJ = 125°C, VR = VRRM, VD=VDRM 5 mA
VTIT = 150 A, TVJ = 25 °C 1.2 V
VTO For power-loss calculations only 0.8 V
rT 2.4 m
VGT VD=6V TVJ= 25°C 1.5 V
TVJ=-40°C 1.6 V
IGT VD=6V TVJ= 25°C 150 mA
TVJ=-40°C 200 mA
VGD TVJ= 125°C VD=2/3VDRM 0.2 V
IGD TVJ= 125°C VD=2/3VDRM 10 mA
ILTVJ= 25°C, tP=10µs 450 mA
IG=0.45A, diG/dt=0.45A/µs
IHTVJ= 25°C, VD=6V, RGK= ∞≤ 200 mA
tgd TVJ= 25°C, VD=1/2VDRM 2 µs
IG=0.45A, diG/dt=0.45A/µs
RthJC per thyristor; DC 0.26 K/W
per module 0.13 K/W
RthJK per thyristor; sine 180° el 0.46 K/W
per module 0.23 K/W
dsCreeping distance on surface 11.2 mm
dACreeping distance in air 5.0 mm
aMax. allowable acceleration 50 m/s²
Package style and outline
Dimensions in mm (1mm = 0.0394“)
http://store.iiic.cc/