1
®
FN6113.0
ISL1540
Data Sheet September 11, 2006
-52V Dual Channel Differential DSL Line
Driver
The ISL1540 is a -52V dual channel differential ampli fier
designed for driving full rate ADSL signals at very low power
dissipation. The high supply voltage allows opera tion from a
single standard -52V negative battery supply. It contains two
pairs of wideband, high voltage, current mode feedback
amplifiers optimized for lower power consumption and
highest performance in ADSL and ADSL2+ systems. The
line drivers have fixed gain AV = 48 with integrated feedback
and gain resistors. Its output clamping circuit eliminates the
requirement for the Zener protection diodes.
These drivers achieve an MTPR distortion measurement of
better than 70dB while consuming typically 3mA per DSL
channel of total supply current.
The ISL1540 is supplied in a the r mally-enhanced 8mm x
8mm 32 Ld QFN package and is specified for operating over
the full -40°C to +85°C temperature range.
Features
• 100mA output current driving capability
• Operates from a single -40V to -60V power supply
• 800mW per channel total power dissipation
• MTPR of -70dB
•96V
P-P differential output swing
• Fixed gain, integrated gain resistors
• Current control pins
• Output clamp for lightning and surge protection
• Channel separation
-75dB @ 1MHz
• Pb-free plus anneal available (RoHS compliant)
Applications
• Dual port ADSL and ADSL2+ line drivers
• HDSL, HDSL2, HDSL 4 and SHDSL line drivers
• DSLAM, DLC, MDU/MTU line drivers
• Performance upgrade to Le87213 and Le87213A
Pinout ISL1540
[32 Ld QFN (8mm x 8mm)]
TOP VIEW
Ordering Information
PART
NUMBER
TAPE &
REEL PACKAGE PKG. DWG. #
ISL1540IRZ
(See Note) - 32 Ld QFN
(8mm x 8mm)
(Pb-free)
MDP0046
ISL1540IRZ-T7
(See Note) 7” 32 Ld QFN
(8mm x 8mm)
(Pb-free)
MDP0046
ISL1540IRZ-T13
(See Note) 13” 32 Ld QFN
(8mm x 8mm)
(Pb-free)
MDP0046
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020. THERMAL
PAD
24
23
22
21
20
19
32
31
30
29
28
9
10
11
12
13
1
2
3
4
5
6
NC
NC
NC
NC
NC
INA
OUTD
NC
NC
NC
NC
NC
OUTA
VBAT
GND
OUTB
NC
NC
MONAB
ENAB
NC
GND
7
8
18
17
14 27
15 26
IND
INC
VCC
MONCD
INB
NC
OUTC
NC
16ENCD 25 NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
Get Full Datasheet
2
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No lice nse is gran t ed by i mpli catio n or other wise u nder an y p a tent or patent right s of I nter sil or it s sub sidi aries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN6113.0
September 11, 2006
ISL1540
