FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
General Description
Features
Functional Diagram
The HMC362S8G & HMC362S8GE are low noise
Divide-by-4 Static Dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages.
This device operates from DC (with a square wave
input) to 12 GHz input frequency with a single +5V
DC supply. The low additive SSB phase noise of -149
dBc/Hz at 100 kHz offset helps the user maintain good
system noise performance.
Ultra Low SSB Phase Noise: -149 dBc/Hz
Wide Bandwidth
Output Power: -6 dBm
Single DC Supply: +5V
S8G SMT Package
Electrical Speci cations, TA = +25° C, 50 Ohm System, Vcc = 5V
Typical Applications
Prescaler for DC to X Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Point-to-Point and Point-to-Multi-Point Radios
• VSAT
v03.0505
Parameter Conditions Min. Typ. Max. Units
Maximum Input Frequency 12 13 GHz
Minimum Input Frequency Sine Wave Input. [1] 0.2 0.5 GHz
Input Power Range Fin = 1 to 8 GHz -15 >-20 +10 dBm
Fin = 8 to 10 GHz -10 >-15 +3 dBm
Fin = 10 to 12 GHz -5 >-8 0 dBm
Ouput Power Fin = 11 GHz -9 -6 dBm
Reverse Leakage Both RF Outputs Terminated 60 dB
SSB Phase Noise (100 kHz offset) Pin = 0dBm, Fin = 6 GHz -149 dBc/Hz
Output Transition Time Pin = 0 dBm, Fout = 882 MHz 100 ps
Supply Current (Icc) 68 mA
1. Divider will operate down to DC for square-wave input signal.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 9
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
-30
-20
-10
0
10
20
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
HMC362S8G / 362S8GE
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
Input Sensitivity Window, T= 25 °C Input Sensitivity Window vs. Temperature
Output Power vs. Temperature
Recommended
Operating Window
Reverse Leakage, Pin= 0 dBm, T= 25 °C
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
v03.0505
-30
-20
-10
0
10
20
02468101214
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -40 C
Max Pin -40 C
INPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-10
-8
-6
-4
-2
0
02468101214
+25 C
+85 C
-40 C
OUTPUT POWER (dBm)
INPUT FREQUENCY (GHz)
-160
-140
-120
-100
-80
-60
-40
-20
0
102103104105106107
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-80
-60
-40
-20
0
02468101214
Both Output Ports Terminated
One Output Port Terminated
POWER LEVEL (dBm)
INPUT FREQUENCY (GHz)
-50
-40
-30
-20
-10
0
02468101214
Pfeedthru
2nd Harmonic
3rd Harmonic
OUTPUT LEVEL (dBm)
INPUT FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 10
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C Absolute Maximum Ratings
Outline Drawing
Typical Supply Current vs. Vcc
Note: Divider will operate over full voltage range shown above
RF Input (Vcc = +5V) +13 dBm
Vcc +5.5V
VLogic Vcc -1.6V to Vcc -1.2V
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Vcc (V) Icc (mA)
4.75 61
5.0 68
5.25 74
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC362S8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC362
XXXX
HMC362S8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] HMC362
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
v03.0505
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
-300
-200
-100
0
100
200
300
22.7 23.1 23.5 23.9 24.3 24.7
AMPLITUDE (mV)
TIME (nS)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 11
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Pin Description
Pin Number Function Description Interface Schematic
1 OUT Divided output 180° out of phase with pin 3.
2, 6 N/C No connection. These pins must not be grounded.
3 OUT Divided Output.
4 VCC Supply voltage 5V ± 0.25V.
5 IN RF Input must be DC blocked.
7IN
RF Input 180° out of phase with pin 5 for differential operation.
A/C ground for single ended operation
8GND
Ground Backside of package has exposed metal ground slug which
must be connected to ground.
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
v03.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 12
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Evaluation PCB
List of Materials for Evaluation PCB 104631 [1]
The circuit board used in the nal application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and backside ground slug should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Item Description
J1 - J3 PCB Mount SMA RF Connector
C1 - C4 100 pF Capacitor, 0402 Pkg.
C5 1000 pF Capacitor, 0603 Pkg.
C6 10 μF Tantalum Capacitor
U1 HMC362S8G / HMC362S8GE Divide-by-4
PCB [2] 104627 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
v03.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
6
6 - 13
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Application Circuit
HMC362S8G / 362S8GE
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 12 GHz
v03.0505
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
