REVISION AG DO NOT SCALE FROM THIS PRINT 01 (No OF POS x .050[1.27]) + .015[0.38] REF CL .250 6.35 REF 02 .050 1.27 REF .080 2.03 REF "A" C .440 11.18 REF N-1 (SEE TABLE 2) SFSDX-XX-XXX-XX-XX.XX-XX-XXX FEP CABLE OPTION -T: FEP (LEAVE BLANK FOR STANDARD PVC INSULATION) No OF POSITIONS -02, -04, -05, -07, -10, -15, -20, -25, -30 -35 -40, -45, & -50 (PER ROW) .120 3.05 REF .145 3.68 REF AVAILABLE AS STANDARD -02 THRU -50 AVAILABLE AS ASO WIRE GAUGE (AWG) N (SEE TABLE 2) -28, -30 COLOR CODE: FIG 1 LEAVE BLANK FOR ALL BLACK WIRE -S: SINGLE END C: COLOR CODED WIRE, SEE COLOR (SFSD-10-28-XX-XX.XX-S SHOWN) SEQUENCE TABLE, SHEET 3 (NOT AVAILABLE WITH FEP OPTION) ISDF-XX-D PLATING SPECIFICATION .050 1.27 REF -H: 30" HEAVY GOLD IN CONTACT AREA, 3" GOLD ON TAIL -G: 10" LIGHT GOLD IN CONTACT AREA, 3" GOLD ON TAIL -F: 3" FLASH GOLD IN CONTACT AREA, 3" GOLD ON TAIL -GF: 3" FLASH SELECTIVE IN CONTACT AREA, 3" GOLD ON TAIL (ONLY AVAILABLE TO EXISTING .249 6.32 CUSTOMERS; SEE -F PLATING) REF (SEE TABLE 3, SHEET 1) C ASSEMBLED LENGTH: (SEE NOTE 8) ASSEMBLED LENGTH SPECIFY IN INCHES (SINGLE END: 03.00 INCH [76.2mm] MINIMUM, DOUBLE END: 03.25 INCH [82.6mm] MINIMUM) AG -NXX OPTION (END 2) (ONLY AVAILABLE WITH -D, -DL, -DR, -DS & -SS) -NUS: NOTCH UP, STRAIGHT (PIN 1 TO PIN N-1) -NDS: NOTCH DOWN, STRAIGHT (PIN 1 TO PIN 2) -NUX: NOTCH UP, CROSSED (PIN 1 TO PIN N) -NDX: NOTCH DOWN, CROSSED (PIN 1 TO PIN 1) END OPTION (END OPTION COMBINATIONS NOT AVAILABLE) -S: SINGLE END -D: DOUBLE END (MUST CHOOSE FROM -NXX OPTIONS) -SL: SINGLE ENDED WITH FRICTION LOCK (SEE SHEET 2, FIG 3)(ONLY AVAILABLE ON *5,*7, 10 THRU 50 POSITION) -DL: DOUBLE ENDED WITH FRICTION LOCK (SEE SHEET 2, FIG 4) (ONLY AVAILABLE ON *5,*7, 10 THRU 50 POSITION) (MUST CHOOSE FROM -NXX OPTIONS) -SR: SINGLE ENDED WITH RETENTION LATCH (SEE SHEET 3, FIG 5)(USE SUB-IM-LTC-07-01-N) (ONLY AVAILABLE ON -02 THRU -50 POS) -DR: DOUBLE ENDED WITH RETENTION LATCH (SEE SHEET 3, FIG 6)(USE SUB-IM-LTC-07-01-N) (ONLY AVAILABLE ON -02 THRU -50 POS) (MUST CHOOSE FROM -NXX OPTIONS) -SS: DUAL SCREW DOWN, SINGLE ENDED CABLE (SEE SHT 4, FIG 7) (ONLY AVAILABLE ON 02 THRU 40 POSITIONS) (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01, MUST CHOOSE FROM NXXX OPTIONS) -DS: DUAL SCREW DOWN, DOUBLE ENDED CABLE (SEE SHT 4, FIG 8) (ONLY AVAILABLE ON 02 THRU 40 POSITIONS) (NOT AVAILABLE WITH OPTIONS SL, DL, SR & DR USES ISDF-XX-D-DS, CPS-RR-XX-XX-X & ACCRT-01, MUST CHOOSE FROM NXXX OPTIONS) (* = NOT AVAILABLE WITH POLARIZATION KEY) DWCX-XX-XX-300 C AG POLARIZATION KEY AG "A" ASSEMBLED LENGTH: XX.XX .125[3.18] SECTION "A"-"A" AG NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. MINIMUM PULLOUT FORCE: 3.0 LBS [13.3 N]. C 3. CONTACT MUST BE INSERTED UNTIL RETENTION FEATURE LOCKS INTO PLACE. C 4. ALL FINISHED GOODS ARE TO BE ELECTICAL TESTED INCLUDING HI-POT TEST AT 1000 VOLTS DC. AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH 1 LABEL-ET. 5. TINNED COPPER WIRE IS RoHS COMPLIANT. 6. PARTS TO BE LAYER PACKAGED. 7. END OF DISCRETE WIRE MUST BE IN THE RANGE AFTER CRIMP. 8. FOR LENGTHS LESS THAN 12 in, TOLERANCE SHALL BE +/-.125. FOR OTHER LENGTHS, TOLERANCE SHALL BE +/-2%. 9. NOTE DELETED. C 10. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS, TOLERANCES, TOOLING AND ITS REQUIREMENTS. 11. 3LB MIN WIRE CRIMP STRENGTH FOR -30 AWG AND 4.5LB MIN WIRE CRIMP STRENGTH FOR -28 AWG. 12. NOTE DELETED. F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW FIG 2 -D: DOUBLE END (SFSD-10-28-XX-XX.XX-D-NUS SHOWN) (SAME AS FIG 1, UNLESS OTHERWISE STATED) UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [.3] 2 .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 2:1 INSULATOR: LCP, COLOR: BLACK CONTACT: BeCu CABLE INSULATION: PVC OR FEP, SEE CALLOUT WIRE: DWC: TINNED COPPER. DWCT: SILVER PLATED COPPER (SEE TABLE 1) 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050[1.27] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. SFSDX-XX-XXX-XX-XX.XX-XX-XXX BY: BRATCHER 5/5/2005 SHEET 1 OF 4 REVISION AG N-1 02 N 01 01 01 02 (SEE TABLE 2) N N-1 (SEE TABLE 2) N-1 N (SEE TABLE 2) NOTCH END 1 NOTCH END 2 N 02 01 NOTCH END 1 02 N-1 (SEE TABLE 2) -NUS (END 2 NOTCH UP, CABLE STRAIGHT) (PIN 1 TO PIN N-1) (SEE TABLE 2) N-1 NOTCH END 2 -NDX (END 2 NOTCH DOWN, CABLE CROSSED) (PIN 1 TO PIN 1) 02 N 01 ISDF-XX-D-L ISDF-XX-D-L 01 02 NOTCH END 1 NOTCH END 2 N N-1 (SEE TABLE 2) -NUX (END 2 NOTCH UP, CABLE CROSSED) (PIN 1 TO PIN N) (SEE TABLE 2) (SEE TABLE 2) N-1 N N-1 N 01 02 01 02 FIG 3 -SL: SINGLE END FRICTION LOCK (SFSDX-10-28-XX-XX.XX-SL SHOWN) (SAME AS FIG 1, UNLESS OTHERWISE STATED) NOTCH END 1 FIG 4 -DL: DOUBLE END FRICTION LOCK (SFSDX-10-28-XX-XX.XX-DL-NUS SHOWN) (SAME AS FIG 1, UNLESS OTHERWISE STATED) PROPRIETARY NOTE -NDS NOTCH END 2 (END 2 NOTCH DOWN, CABLE STRAIGHT) (PIN 1 TO PIN 2) F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 1:0.571429 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050[1.27] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. SFSDX-XX-XXX-XX-XX.XX-XX-XXX BY: BRATCHER 5/5/2005 SHEET 2 OF 4 REVISION AG FIG 6 FIG 5 -SR: SINGLE END WITH RETENTION LATCH (SFSDX-10-28-XX-XX.XX-SR SHOWN) (ONLY AVAILABLE ON -02 THRU -50 POS) (SAME AS FIG 1, UNLESS OTHERWISE STATED) C C .113 2.86 C .083 2.11 (TYP) -DR: DOUBLE END WITH RETENTION LATCH (SFSDX-10-28-XX-XX.XX-DR SHOWN) (ONLY AVAILABLE ON -02 THRU -50 POS) (SAME AS FIG 1, UNLESS OTHERWISE STATED) .080 2.03 REF ISDF-XX-D-R SUB-IM-LTC-07-01-N .083 2.11 (TYP) ISDF-XX-D-R .080 2.03 REF .113 2.86 C (No OF POS x .050[1.27]) + .145[3.68] REF (TYP) (No OF POS x .050[1.27]) + .145[3.68] REF PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050[1.27] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. SFSDX-XX-XXX-XX-XX.XX-XX-XXX BY: BRATCHER 5/5/2005 SHEET 3 OF 4 REVISION AG FIG 8 FIG 7 -DS: DOUBLE END WITH SCREW DOWN (SFSDX-10-XXX-XX-01.60-DS-NDS SHOWN) (ONLY AVAILABLE ON -02 THRU -40 POS MUST CHOOSE FROM -NXXX OPTIONS) (SAME AS FIG 1, UNLESS OTHERWISE STATED) -SS: SINGLE END WITH SCREW DOWN (SFSDX-10-XXX-XX-01.60-SS-NDS SHOWN) (ONLY AVAILABLE ON -02 THRU -40 POS MUST CHOOSE FROM -NXXX OPTIONS) (SAME AS FIG 1, UNLESS OTHERWISE STATED) (No OF POS X .050[1.27]) + .360 [9.14] C C CPS-RR-M2-01-X (No OF POS X .050[1.27]) + .360 [9.14] (TYP) .079 2.00 REF .145 3.68 C CPS-RR-M2-01-X ACCRT-01 .079 2.00 REF C .145 3.68 'A' ISDF-XX-D-DS ISDF-XX-D-DS (No OF POS x .050[1.27]) +.015[0.38] REF "B" (No OF POS x .050[1.27]) +.015[0.38] REF "B" DETAIL 'A' SCALE 4 : 1 ACCRT-01 PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. R.057 1.45 REF DO NOT SCALE DRAWING SECTION "B"-"B" SCALE 4 : 1 SHEET SCALE: 2:1 F:\DWG\MISC\MKTG\SFSDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 DESCRIPTION: .050[1.27] SOCKET DISCRETE CABLE ASSEMBLY DWG. NO. SFSDX-XX-XXX-XX-XX.XX-XX-XXX BY: BRATCHER 5/5/2005 SHEET 4 OF 4