DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
THIS PRODUCT MANUFACTURED
WITH LEAD-FREE PROCESSING
Pb
DO NOT
SCALE FROM
THIS PRINT
-ST: STRAIGHT
ORIENTATION
-CA1: CABLE
(RG174 OR RG316)
TERMINATION
-C: CABLE
TYPE
-J: JACK
GENDER
MCX-J-C-X-ST-CA1
PLATING SPECIFICATION
-H: 30µ" GOLD CENTER CONTACT,
3µ" GOLD OUTER CONTACT
(SEE TABLE 1)
15.50
REF
.610
4.50 .177
REF
3
7.50
REF
.295
0.96 .038
REF
2
3.90 .154
REF
7.00
REF
.276
1
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS ANGLES
.X:
0.3 [.01] 5
.XX:
0.13 [.005]
.XXX:
0.051 [.0020]
MATERIAL:
MCX STRAIGHT CABLE JACK, RG174 & RG316- 50 OHM
BY:
MCX-J-C-X-ST-CA1
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
R MUSSER
02/06/2008
2
1
SHEET SCALE: 6:1
F:\DWG\MISC\MKTG\MCX-J-C-X-ST-CA1-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. CENTER CONTACT PUSHOUT FORCE: 10 N [2.25 LB] MIN.
3. NOTE DELETED.
4. NOTE DELETED.
5. PRODUCT TO BE PACKAGED PER PACKAGING STANDARD CO-RF-WI-3040-M.
6. NOTE DELETED.
7. NOTE DELETED.
8. NOTE DELETED.
SHELL, FERRULE: BRASS
CONTACT: COPPER ALLOY
DIELECTRIC: PTFE
REVISION K
10.10
±0.30
.398
±.012
5.00
±0.30
.197
±.012
2.60
±0.30
.102
±.012
IN-PROCESS 1
STRIP AND TIN INNER CONDUCTOR
RG-174 OR RG-316 CABLE
C
C
C
20.0
±2.5
.79
±.10
IN-PROCESS 2
ADD HEAT SHRINK TUBE AND FERRULE
HST-0.125-02-BLK
1
0.10
MAX ALLOWABLE GAP
.004
IN-PROCESS 3
SOLDER SIGNAL SOCKET
C
2
2.30 .091
(MIN. FLARED ID)
IN-PROCESS 4
FLARE SHIELD
'A'
IN-PROCESS 5
ADD SUB ASSEMBLY
3
3.45
HEX CRIMP
.136
(ACROSS 2 FACES)
0.25
MAX ALLOWABLE GAP
.010
IN-PROCESS 6
CRIMP FERRULE
(USE RF CRIMP HAND TOOL # CAT-HT-126667-21)
C
C
0.6 [0.03] MAX GAP ALLOWABLE
IN-PROCESS 7
APPLY HEAT SHRINK TUBING
2.68
REF
.106
TO INSULATOR
2.58
REF
.102
TO CENTER CONTACT
DETAIL 'A'
SCALE 6 : 1
'B'
0.45
REF
.018
DETAIL 'B'
SCALE 8 : 1
SHEET OF
MCX STRAIGHT CABLE JACK, RG174 & RG316- 50 OHM
BY:
MCX-J-C-X-ST-CA1
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
R MUSSER
02/06/2008
2
2
SHEET SCALE: 1:0.666667
REVISION K
F:\DWG\MISC\MKTG\MCX-J-C-X-ST-CA1-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
