MADL-011014-001000 - M/A-COM Technology Solutions

320 W Peak Power Limiter

1 - 2 GHz

Rev. V4

MADL-011014

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 +55 dBm Peak Power Handling @ +85°C

 +53 dBm CW Power Handling @ +85°C

 0.35 dB Insertion Loss (1.2 - 1.4 GHz)

 19 dB Return Loss (1.2 - 1.4 GHz)

 +19 dBm Flat Leakage Power

 Lead-Free 10.1 x 6.2 x 3.2 mm3 Package

 RoHS* Compliant and 260oC Reflow Compatible

 Hermetic Seal

Description

The MADL-011014 is a lead-free surface mount,

high power limiter which integrates the equivalent of

19 PIN, Schottky, limiter diodes, capacitors,

inductors, and resistors in a compact ceramic

package. This device provides superior low and high

signal performance from 1 - 2 GHz without DC bias.

The MADL-011014 is ideally suitable for higher peak

and CW power receiver-protector microwave circuits

applications where higher performance surface

mount limiter assemblies are required.

Ordering Information

* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.

Functional Schematic

Pin Configuration

2. The exposed paddle centered on the package bottom must be

connected to RF, DC, and thermal ground.

1. Hermetic Seal provides fine leak rate < 5x10-8 atm·cc/s.

Top view

Pin No. Pin Name Description

1 RFIN RF Input

2 RFOUT RF Output

3 Paddle2 Ground

2RFOUT

3GND

RFIN

Part Number Package

MADL-011014-001000 Hermetic Seal1

MADL-011014-001SMB Sample board

(Hermetic Seal Limiter)

320 W Peak Power Limiter

1 - 2 GHz

Rev. V4

MADL-011014

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Absolute Maximum Ratings4,5

Parameter Absolute Maximum

Peak Incident Power

3 ms pulse, 10% duty @ +85°C +55 dBm

CW Incident Power @ +85°C +53 dBm

Junction Temperature6 175°C

Operating Temperature -65°C to +125°C

Storage Temperature -65°C to +150°C

4. Exceeding any one or combination of these limits may cause

permanent damage to this device.

5. MACOM does not recommend sustained operation near these

survivability limits.

6. Operating at nominal conditions with TJ ≤ +175°C will ensure

MTTF > 1 x 106 hours.

Electrical Specifications: TA = +25°C, Z0 = 50 Ω (unless otherwise defined)

Parameter Test Conditions Units Min. Typ. Max.

Insertion Loss -10 dBm, 1.2 - 1.4 GHz

-10 dBm, 1.0 - 2.0 GHz dB — 0.35

0.8

0.6

—

Return Loss -10 dBm, 1.2 - 1.4 GHz

-10 dBm, 1.0 - 2.0 GHz dB — 19

10 —

P1dB Input Compression Power 1.3 GHz dBm — +12 —

C.W. Incident Power3 1.3 GHz dBm — 55 —

Peak Incident Power3 3 ms pulse, 10% duty cycle, 1.3 GHz dBm — 55 —

Flat Leakage Power 3 ms pulse, 10% duty cycle, 1.3 GHz dBm — 19 —

Spike Leakage Power +55 dBm, 3 ms pulse, 10% duty cycle,

1.3 GHz dBm — 28 —

Spike Leakage Energy +55 dBm, 3 ms pulse, 10% duty cycle,

1.3 GHz ergs — 0.5 —

Recovery Time

(3 dB of Insertion Loss)

+55 dBm, 3 ms pulse, 10% duty cycle,

1.3 GHz µs — 3.5 —

Input 3rd Order

Intermodulation Products (IIP3) -10 dBm, F1 = 1.500 GHz, F2 = 1.510 GHz dBm — 20 —

3. Incident power ratings defined with 1.2:1 source VSWR and 1.2:1 maximum load VSWR.

Pulse Width vs. Peak Input Power @ +85°C

(10% Duty Cycle, 1.3 GHz)

Typical Performance Curve

53 54 55 56 57 58 59 60

Peak Incident Power (dBm)

320 W Peak Power Limiter

1 - 2 GHz

Rev. V4

MADL-011014

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Insertion Loss vs. Frequency Input Return Loss vs. Frequency

Pulsed Flat Leakage Power vs. PIN

(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)

-1.0

-0.8

-0.6

-0.4

-0.2

0.0

1.0 1.2 1.4 1.6 1.8 2.0

+25°C

-40°C

+85°C

Frequency (GHz)

-25

-20

-15

-10

-5

1.0 1.2 1.4 1.6 1.8 2.0

+25°C

-40°C

+85°C

Frequency (GHz)

010 20 30 40 50 60

+25°C

-40°C

+85°C

Incident Power (dBm)

010 20 30 40 50 60

+25°C

-40°C

+85°C

Incident Power (dBm)

44 46 48 50 52 54 56

+25°C

-40°C

+85°C

Incident Power (dBm)

CW Flat Leakage Power vs. PIN @ 1.3 GHz

Pulsed Spike Leakage Power vs. PIN

(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)

Pulsed 3 dB Recovery Time vs. PIN

(3 ms Pulse, 10% Duty Cycle, 1.3 GHz)

100

1000

10000

44 46 48 50 52 54 56

+25°C

-40°C

+85°C

Incident Power (dBm)

320 W Peak Power Limiter

1 - 2 GHz

Rev. V4

MADL-011014

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

SMB Layout SMB Layout

Part Quantity Part Number

RF Connector 2 Johnson 142-0701-851

Limiter 1 MADL-011014

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

These devices are sensitive to electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these HBM Class 1C

devices.

Lead-Free 10.1 x 6.2 x 3.2 mm3 2-Lead package†

† Reference Application Note S2083 for lead-free solder reflow recommendations.

Plating is Au over NI over Cu.

320 W Peak Power Limiter

1 - 2 GHz

Rev. V4

MADL-011014

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Application Section

Transmit-Receive Block Diagram

using the L Band MADL-011014 Limiter

Ant

Circulator

50 Ω High

Power Load

Circulator

MAGX-001214

GaN PA

MAAL-010705

LNA

MADL-011014

Limiter