HALL EFFECT LINEAR OUTPUT PUSHBUTTONS LINEAR OUTPUT
PUSHBUTTONS
HPL
Specifications Subject To Change Without Notice www.ottoexcellence.com 19
HALL EFFECT
PROVIDES 10 MILLION LINEAR OUTPUT CYCLES USING CONTACTLESS HALL EFFECT TECHNOLOGY
The HPL Series is a revolutionary new switch utilizing Hall Effect
technology to provide the user an output proportional to the travel of
the button. Available IP68 with seal, the HPL delivers 10,000,000
actuations. This rugged switch is ideal for applications where a simple
On/Off control is insufficient, and a linear output is desired. Using the
HPL, an operator can control the motion of a device as well as the
speed of the movement. The HPL switch is an ideal control device for
valves and variable speed drives, and can be used in industrial control,
heavy equipment, and material handling applications.
The HPL is offered as a stand-alone switch and in a dual HPL rocker
assembly. As with all OTTO switches, a wide variety of case and button
styles and colors are offered, along with various termination styles and
two levels of sealing. OTTO can also provide custom configurations as
well as provide the HPL switches installed in a control grip.
Quality Features:
• Programmable outputs of .5 to 4.5 volts
• 10 million cycle performance
• Hall Effect for reliable contactless switching
• Can be sealed watertight per IP68
• Front or behind panel mounting
• Choice of termination styles
• Rocker version available
Rocker
Assembly
Using
2 HPL’s
HPL Part Number Code
HPL- X X X X X X X
Case Style Output Terminal Style Seal Level Case Color Button Color Button Style
1. Press Fit 1. 1-4V 1. 3 Pin 1. IP65 Splashproof 1. Clear 1. Red 1. .375” OD (Case
3. Front Mount 2. 4-1V .025 SQ Pins, 2. IP68S Watertight Anodize 2. Black Styles 1, 3, 4, & 6)
5/8” Thread 3. .5-4.5V .100 Centers 2. Black 3. Orange 2. .500” OD Domed
4. Rear Mount 4. 4.5-.5V 2. 18” Potted 22AWG Anodize 4. Yellow (Case Styles 1, 3, & 6)
15/32” Thread Wire Leads 5. Green R. Rocker Assembly
6. Rear Mount 6. Blue (Case Style R)
5/8” Thread 7. Pur ple
R. Rocker Assembly 8. Grey Consult factory for availablity
9. White of larger button diameters.
HALL EFFECT LINEAR OUTPUT PUSHBUTTONS
LINEAR OUTPUT
PUSHBUTTONS
HPL
20 OTTO 2007 Full Line Catalog Specifications Subject To Change Without Notice
PROVIDES 10 MILLION LINEAR OUTPUT CYCLES USING CONTACTLESS HALL EFFECT TECHNOLOGY
HPL-1
Press Fit
HPL-3
5/8" Thread
Front Mount
Button Style 1
HPL-4
15/32" Thread
Rear Mount
HPL-3
5/8" Thread
Front Mount
Dome Button
Button Style 2
Linear Output Graphs (Vcc=5V@20°C)
HPL-6
5/8" Thread
Rear Mount
HPL-R*
Rocker
R.110 (2)
Case Styles
.830 .710
HPL dimensions are equivalent to standard OTTO P1 pushbutton dimensions as shown in the
catalog except for overall length. Total button height is .25" on standard .375" O.D. buttons.
Overall length from button top to rear of potting is 1.26" nominal, except for the HPL-4 and .500
O.D. button styles which measures 1.56". Panel mounting hardware is included, except with the
HPL-1 which is meant to press-fit into mounting hole in a control grip. Refer to the dimensions
shown or consult OTTO to design the control grip to meet your specifications.
* Contact Factory For
Alternative Bracket Styles
&External Boot Options.
Standard Characteristics/Ratings:
OPERATIONAL:
Mechanical Life: 10,000,000 cycles
Seal Options: IP64 & IP68
Temperature Range: -40°C to+85°C
Button Travel: .14 to .16 inches
OperatingForce: 2.0±.0.2 lbs.
MATERIALS:
Button: Thermoplastic
Case: Black anodized
aluminum alloy
ELECTRICAL:
Supply Voltage: 4.5VDC to 5.5 VDC max.
Supply Current: 10 mA max.
Continuous Current Output: 1 mA max.
Reverse Voltage Protection: -5V max.
Schematic
HPL-R
HPL-R
HPL
HPL
4700 pF
4700 pF
Vcc+(Red)
Output o(Yellow)
GND -(Black)
