U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
1/7
High Accuracy
CE Compliant
Compact
Variety of Pressure Ports and Electrical Configurations
Optional Stainless Steel Snubber
Weatherproof
Gage, Sealed, Absolute, Compound
Expedite Configurations Available (10 Days)
DESCRIPTION
The U5200 pressure transducers from the UltraStable line of MEAS, with their modular design, offer maximum
flexibility for different configurations. This latest series features high accuracy and a quick turnaround for demanding
commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for
difficult media such as contaminated water, steam, and mildly corrosive fluids.
The wetted material is made of 316L stainless steel and the transducer’s durability is excellent with no o-rings or
organics exposed to the pressure media. The U5200 is weatherproof and exceeds the latest heavy industrial CE
requirements including surge protection. The circuit is protected from reverse wiring at input and short circuit at output.
This product is geared to the OEM customer for low to mid volumes. MEAS stands ready to provide a custom
design of the U5200 where the volume and application warrants. Additional configurations not listed are either available or
possible. Please inquire for further information.
FEATURES APPLICATIONS
Heavy Industrial CE Approval
Industrial Process Control and Monitoring
10 V/m EMI Protection
Advanced HVAC Systems
Reverse Polarity Protection on Input
Refrigeration Systems
Short Circuit Protection on Output
Automotive Test Stands
Up to ±0.1% Accuracy
Off-Road Vehicles
Up to ±0.75% Total Error Band
Pumps and Compressors
Compact Outline
Hydraulic/Pneumatic Systems
-40°C to +125°C Operating Temperature
Agriculture Equipment
Weatherproof
Energy Generation and Management
STANDARD RANGES
Range (psi)
Range (Bar)
Gage
Sealed
Absolute
Compound
0 to 002
0 to .14
0 to 005
0 to .35
0 to 015
0 to 001
0 to 030
0 to 002
0 to 050
0 to 3.5
0 to 100
0 to 007
0 to 200
0 to 014
0 to 300
0 to 020
0 to 500
0 to 035
0 to 01k
0 to 070
0 to 03k
0 to 200
0 to 05k
0 to 350
0 to 10k
0 to 700
Intermediate ranges available upon request.
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
2/7
PERFORMANCE SPECIFICATIONS
Ambient Temperature: 25°C (unless otherwise specified)
PARAMETERS
MIN
TYP
MAX
UNITS
NOTES
Accuracy
(RSS of linearity, hysteresis, and repeatability)
-0.5
0.5
%F.S. BFSL
≤ 2psi @ 25°C
-0.25
0.25
%F.S. BFSL
> 2psi and ≤ 5psi @ 25°C
-0.1
0.1
%F.S. BFSL
> 5psi and ≤ 500psi @ 25°C
-0.25
0.25
%F.S. BFSL
> 500psi and ≤ 5000psi @ 25°C
-0.75
0.75
%F.S. BFSL
> 5000psi @ 25°C
Isolation, Body to any Lead
100
MΩ
@500VDC
Dielectric Strength
2
mA
@500VAC, 1min
Pressure Cycles
1.00E+6
0~FS Cycles
Proof Pressure
3X
20k psi
Rated
Burst Pressure
4X
20k psi
Rated
Long Term Stability (1 year)
-0.1
0.1
%F.S.
Total Error Band
-1.25
1.25
%F.S.
≤ 2psi
-1.0
1.0
%F.S.
> 2psi and ≤ 5psi
-0.75
0.75
%F.S.
> 5psi and ≤ 5000psi
-1.25
1.25
%F.S.
> 5000psi
Compensated Temperature
-20
+85
°C
Operating Temperature
-40
+125
°C
Except cable 105°C max
Storage Temperature
-40
+125
°C
Except cable 105°C max
Load Resistance (RL)
RL > 100k
Ω
Voltage Output
Load Resistance (RL)
< (Supply Voltage -9V) / 0.02A
Ω
Current Output
Current Consumption
5
mA
Voltage Output
Rise Time (10% to 90%)
<2ms (Voltage Output); <3ms (Current Output); Without Snubber
Pressure Port Material
316L Stainless Steel; 316L Stainless Steel Snubber
Shock
50g, 11msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A
Vibration
±20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L
For custom configurations, consult factory.
Notes
Compensated Temperature: The temperature range over which the product will produce an output proportional to pressure within the
specified performance limits.
Operating Temperature: The temperature range over which the product will produce an output proportional to pressure but may not remain
within the specified performance limits.
Storage Temperature: The temperature range over which the product can be stored safely in occasions without pressure applied or power
input and remains rated performance. Beyond this temperature range may cause permanent damage to the product.
All configurations are built with supply voltage reverse and output short-circuit protections.
CE Compliance
EN 55022 Emissions Class A & B
IEC 61000-4-2 Electrostatic Discharge Immunity (8kV contact/15kV air)
IEC 61000-4-3 Radiated, Radio-Frequency Electromagnetic Field Immunity (10V/m, 80M-1GHz)
IEC 61000-4-4 Electrical Fast Transient Immunity (1kV)
IEC 61000-4-5 Surge Immunity (V+ to V-: ±2KV/42Ω; L to Case: ±1KV/12Ω; V- to V0: ±1KV/42Ω)
IEC 61000-4-6 Immunity to Conducted Disturbances Induced by Radio Frequency
Fields (150K~80MHz, 10V level for voltage output models, 3V level for current output model)
IEC 61000-4-9 Pulse Magnetic Field Immunity (100A/m peak)
For all CE compliance tests, max allowed output deviation ±1.5 %F.S.
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
3/7
DIMENSIONS [mm]
Note: Refer to installation instructions supplied with devices for
recommended torque.
CODE
CONNECTION TYPE
DIM A
1
CABLE 2 FT
2.19 [55.6]
E
CABLE 3 FT
2.19 [55.6]
2
CABLE 4 FT
2.19 [55.6]
3
CABLE 10 FT
2.19 [55.6]
4
PACKARD CONNECTOR A
2.25 [57.2]
5
BAYONET CONNECTOR
2.11 [53.6]
6
FORM C
1.95 [49.5]
7
FORM A
2.10 [53.3]
9
PACKARD CONNECTOR B
2.25 [57.2]
D
M12 CONNECTOR
1.95 [49.5]
M
CABLE 1 M
2.19 [55.6]
N
CABLE 2 M
2.19 [55.6]
P
CABLE 5 M
2.19 [55.6]
R
CABLE 10 M
2.19 [55.6]
A
AMP CONNECTOR
2.10 [53.3]
S
SUMITOMO CONNECTOR
1.95 [49.5]
C
1/2" NPT CONDUIT
2.10 [53.3]
PRESSURE PORT TYPE
CODE
PORT
DIM B
DIM C REF.
2
1/4-19 BSPP
0.472
0.366
[11.94]
[9.3]
3
G3/8 JIS B2351
0.540
0.366
[13.72]
[9.3]
4
7/16-20UNF MALE SAE J1926-
2 STRAIGHT THREAD O-
RING BUNA-N 90SH-904
0.433
0.366
[11.0]
[9.3]
5
1/4-18 NPT
0.600
0.366
[15.24]
[9.3]
6
1/8-27 NPT
0.390
0.366
[9.91]
[9.3]
B
G1/4 JIS B2351
0.472
0.366
[11.94]
[9.3]
E
1/4-19 BSPT
0.500
0.366
[12.7]
[9.3]
F
1/4-19 BSPP FEMALE
(without snubber)
0.771
0.366
[19.58]
[9.3]
P
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
WITH INTEGRAL VALVE
DEPRESSOR
0.687
0.366
[17.5]
[9.3]
N
7/16-20UNF FEMALE SAE
J513 STRAIGHT THREAD
0.687
0.366
[17.5]
[9.3]
Q
M10 x 1.0 mm ISO 6149-2
0.374
0.366
[9.5]
[9.3]
S
M12 x 1.5 mm ISO 6149-2
0.433
0.366
[11.0]
[9.3]
U
G/14 DIN 3852 FORM E
GASKET DIN3869-14 NBR
0.472
0.445
[11.94]
[11.3]
W
M20 x 1.5 mm ISO 6149-2
0.551
0.366
[14.0]
[9.3]
G
M14 x 1.5 mm ISO 6149-2
0.433
0.366
[11.0]
[9.3]
1
4
3
2
2
1
3
2
1
3
21 3
2
1 3
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
4/7
WIRING
CONNECTION +SUPPLY -SUPPLY P REF VENT
Bayonet A B F
Packard, A A B
Hole Through
Connector
Packard, B B A
Hole Through
Connector
Cable RED BLK In Cable
1/2NPT CONDUIT RED BLK In Cable
M12 1 3
Hole Through
Connector
AMP/TE 1 2
Hole Through
Connector
FORM C 1 2
Threads Through
Connector
FORM A 1 2
Threads Through
Connector
Sumitomo 1 2
Hole Through
Connector
CONNECTION +SUPPLY +OUTPUT COMMON NC. PINS P REF VENT
Bayonet A B C D,E F
Packard, A A C B
Hole Through
Connector
Packard, B B C A
Hole Through
Connector
Cable RED WHT BLK In Cable
1/2NPT CONDUIT RED WHT BLK In Cable
M12 1 2 3 4
Hole Through
Connector
AMP/TE 1 3 2
Hole Through
Connector
FORM C 1 2 3 4
Threads Through
Connector
FORM A 1 3 2 4
Threads Through
Connector
Sumitomo 1 3 2
Hole Through
Connector
Current Output Wiring
Voltage Output Wiring
NC. PINS
C,D,E
C
C
2,4
3
3,4
3,4
3
Notes:
1. NC pins are reserved for factory use only. Customers should not use these connections.
2. For cable connection, the drain wire is internally terminated to pressure port.
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
5/7
CONNECTION TYPES
Note: Transmitter of gage pressure type requires vent to atmosphere on the pressure reference side. This is accomplished via cable from
the transmitter (the end of the cable should be terminated to clean and dry area) or through the customer mating connector/cable
assembly which has internal vent path.
Suggested vented M12 mating connector P/N MB12FWAFF04ST-4 and MB12FWAFF04ST-3 at www.finecables.com for
0.157”~0.236” and 0.236”~0.315” diameter cable respectively.
WEATHERPROOF
Note: Weatherproof ratings are met when the mating connectors are installed properly and the cable termination is to dry and clean area.
OUTPUTS
CONNECTION DESCRIPTION
MATING HOUSING
P/N MATING TERMINAL
P/N RUBBER SEAL
P/N
Bayonet BAYONET PTIH-10-6P OR EQUIV PT06A-10-6S MIL-C-26482 - -
Packard 3-PIN METRI-PACK 150 12078090 12103881, QTY 3 -
Cable &
1/2NPT
Conduit
4-WIRE,22 AWG, SHIELDED,
PVC JACKET, 105 DEGC
- - -
M12
BINDER SERIES 713,
09 3431 77 04 OR EQUIV
4-POS FEMALE CONNECTOR - -
AMP/TE
AMP / TE 3-PIN ECONOSEAL
J SERIES
174357-2 & 174358-7
171630-1 (AWG 20~24)
171662-1 (AWG 16~20)
QTY 3
172746-1 (AWG 20~24)
172888-2 (AWG 16~20)
QTY 3
FORM C
INDUSTRIAL STANDARD 9.4MM
FORM C
HIRSCHMANN 933 024-100,OR,
ATAM KD046000B7 (SEAL INCL.)
- HIRSCHMANN 730 185-002
FORM A DIN EN 175 301-803-A 18MM
HIRSCHMANN 931 969-100,OR,
ATAM KA245000B4 (SEAL INCL.)
- HIRSCHMANN 730 801-002
Sumitomo SUMITOMO 3-PIN HV040
6189-6907
8100-3067 (AWG 20~22)
8100-3068 (AWG 16~18)
QTY 3
7165-1075 (INS. DIA 1.1~1.6MM)
7176-0621 (INS. DIA 1.6~1.9MM)
7165-0622 (INS. DIA 1.8~2.2MM)
QTY 3
CONNECTION TYPES
CONNECTION IP CODE
Bayonet IP67
Packard IP66
Cable IP67
1/2NPT CONDUIT IP67
M12 IP67
AMP/TE IP67
FORM C IP65
FORM A IP65
Sumitomo IP67
WEATHER-PROOF RATING
CODE
OUTPUT SIGNAL SUPPLY VOLTAGE
3
0.5 - 4.5V
RATIOMETRIC
5 ± 0.25V
PROTECTED to 30V
4
1 - 5V 8 - 30V
5
4 - 20mA 9 - 30V
6
0 - 5V 8 - 30V
7
0 - 10V 12 - 30V
8
1 - 6V 8 - 30V
9
0.5 - 4.5V 5 - 30V
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
6/7
ORDERING INFORMATION
U52
3
1
-
0
0
00
0
5
-
100P
G
Model
Output
Signal
Connection Type
-
Shipping
Snubber
00
Label
Pressure
Port
-
Pressure
Range
Pressure
Type
U52
3 = 0.5 – 4.5V
Ratiometric
4 = 1 – 5V
5 = 4 – 20mA
6 = 0 – 5V
7 = 0 – 10V
8 = 1 – 6V
9 = 0.5 – 4.5V
1 = Cable 2 ft
E = Cable 3 ft
2 = Cable 4 ft
3 = Cable 10 ft
4 = Packard
Connector A
5 = Bayonet
Connector
6 = Form C
7 = Form A
9 = Packard
Connector B
D = M12 Connector
M = Cable 1 m
N = Cable 2 m
P = Cable 5 m
R = Cable 10 m
A = Amp Connector
S = Sumitomo
Connector
C = 1/2“ NPT
Conduit
-
0 = Standard
H = Expedite
0 = No Snubber
1 = With Snubber
00
0 = Adhesive Label
1 = Laser Marking
2 = 1/4-19 BSPP
3 = G3/8 JIS B2351
4 = 7/16-20UNF
Male SAE J514
Straight Thread O-
Ring BUNA-N 90SH-
904
5 = 1/4-18 NPT
6 = 1/8-27NPT
B = G1/4 JIS B2351
E = 1/4-19 BSPT
F = 1/4-19 BSPP
Female
P = 7/16-20UNF
Female SAE J514
with Integral Valve
Depressor
Q = M10 x 1.0 mm
ISO 6149-2
N = 7/16-20UNF
Female SAE J513
Straight Thread
S = M12 x 1.5 mm
ISO 6149-2
U = G1/4 DIN 3852
Form E Gasket
DIN3869-14 NBR
W = M20 x 1.5 mm
ISO 6149-2
G = M14 x 1.5 mm
ISO 6149-2
-
002P
005P
015P
030P
050P
100P
200P
300P
500P
01KP
03KP
05KP
10KP
.14B
.35B
001B
002B
3.5B
007B
014B
020B
035B
070B
200B
350B
700B
G = Gage
S = Sealed
A = Absolute
C = Compound
G = Gage
S = Sealed
A = Absolute
C = Compound
G = Gage
S = Sealed
(Port 2, 5 only)
A = Absolute
(Port 2, 5 only)
C = Compound
Note: Selections in blue (expedite) have a 10 business day lead time with a 19 piece maximum order.
Compound pressure range is -14.7 to xxxpsig or -1 to xxxbarg. (e.g. 200PC: -14.7 to 200psig, 020BC: -1 to 20barg)
Refer to online installation instruction for recommended torque.
Installation instructions will no longer be shipped with unit delivery.
This document is available on our website in English and Chinese.
Standard In-Stock Models: M12 Connector, ¼-18 NPT Pressure Port, Gage Type
These popular configurations below are typical units available off the shelf:
4 - 20mA Output
0 - 5V Output
0 - 10V Output
U525D-000005-01KPG
U526D-000005-01KPG
U527D-000005-01KPG
U525D-000005-050PG
U526D-000005-050PG
U527D-000005-050PG
U525D-000005-05KPG
U526D-000005-05KPG
U527D-000005-05KPG
U525D-000005-150PG
U526D-000005-150PG
U527D-000005-150PG
U525D-000005-500PG
U526D-000005-500PG
U527D-000005-500PG
U5200 Industrial Pressure Transducer
U5200 www.meas-spec.com August 2015
7/7
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties
45738 Northport Loop West
Fremont, CA 94538
Tel: 1-800-767-1888
Fax: 1-510-498-1578
Sales: pfg.cs.amer@meas-spec.com
Measurement Specialties
(Europe), Ltd.
26 Rue des Dames
78340 Les Clayes-sous-Bois, France
Tel: +33 (0) 130 79 33 00
Fax: +33 (0) 134 81 03 59
Sales: pfg.cs.emea@meas-spec.com
Measurement Specialties
(China), Ltd.
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
Sales: pfg.cs.asia@meas-spec.com
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for
inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the
manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement
Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does
Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement
Specialties, Inc. does not convey any license under its patent rights nor the rights of others.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
TE Connectivity:
U5254-000005-005PG U5244-000005-200PA U5244-000005-030PA U5244-000002-.14BG U5254-000002-002BA
U5254-000005-030PA U5254-000002-.14BG U5244-000002-002BA U5244-000002-014BA U5254-000005-200PA
U5244-000005-005PG U5254-000002-014BA
