SMT Common Mode Chokes
1.0A to 20.0A
Wide variety of package sizes available
1Arms to 20Arms current rating
Inductances from 61uH to 10mH
Dielectric strength: 1500Vrms
(380Vrms continuous)
Electrical Specifications at 25 deg C Temp Range -40 ° C to 125 ° C
Part Number
Inductance4
per Winding
(uH +30%/-35%)
Irated1
(Arms or Adc)
DCR per Winding
(mΩ Max)
Leakage Inductance
(uH Min) Package Name
Package Size
L x W x H
(mm Max)
PA2742NL 397 192 0.6 High Shasta 9.1 x 8.9 x 7.9
PA2741NL 94 1.1 30 0.3 Low Shasta 9.1 x 8.9 x 3.8
PA2752NL 10150 1.4 210 25 LCCI-50 19.6 x 17.0 x 9.9
PA2748NL 1125 1.8 55 3 Polecat 12.7 x 13.2 x 5.6
PA3927NL 800 3 27 1.5 Polecat 13x13x8.6
PA2743NL 383* 3.3 18 1 Polecat 13.0 x 13.0 x 5.6
PA2749NL 536 3.8 17.1 1.2 LCCI-37 16.4 x 14.2 x 8.9
PA2744NL 280 4 13.2 0.7 Polecat 13.0 x 13.0 x 5.6
PA2751NL 486 4.2 16 1 LCCI-44LP 18.2 x 15.0 x 7.6
PA2745NL 130* 5 6.75 0.4 Polecat 13.2 x 13.2 x 5.6
PA2746NL 96* 6 4.3 0.25 Polecat 13.2 x 13.2 x 5.6
PA2750NL 400 6 9.4 1.25 LCCI-44 18.2 x 15.0 x 10.0
PA2747NL 61* 7 2.9 0.15 Polecat 13.5 x 13.5 x 5.6
PA2756NL 484 8 7.7 1.5 LCCI-50 19.6 x 17.0 x 9.9
PA2757NL 1030 9 9.75 3 HCCI-80 31.0 x 25.4 x 12.7
PA2754NL 215 10 3.75 0.5 Makeni 21.1 x 19.1 x 11.2
PA2753NL 95 12.5 3 0.15 LCCI-50 19.6 x 17.0 x 9.9
PA2755NL 117 14 1.95 0.3 Makeni 21.1 x 19.1 x 11.2
PA2670NL 500 16 4.25 1.5 HCCI-80 31.0x25.4x12.7
PG1265NL 380 20 4.1 1.2 HCCI-80 31.0x25.4x12.7
NOTE:
1. The current rating (Irated) is based upon the temperature rise of the component and represents the rms current which will cause a typical temperature rise of 55C with 50LFM forced cooling
2. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range.
3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA2741NL becomes PA2741NLT). Pulse complies to industry standard tape and reel specification EIA481.
4. Components identified by an asterisk have an inductance tolerance of +/- 35%. All other components are +30/-35%.
5. Parts marked with the AEC-Q200 symbol are AEC-Q200 qualified. Parts not identified as AEC-Q200 are still under test.
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
1
SMT Common Mode Chokes
1.0A to 20.0A
0
100
200
300
400
500
600
700
0.11 10 10
0
Frequency (MHz)
Impedance (ohms)
PA2741NL PA2745NL PA2746NL PA2747NL
PA2753NL PA2754NL PA2755NL
0
500
1000
1500
2000
2500
3000
3500
0.1110 100
Frequency (MHz)
Im
pedance
(ohms)
PA2742NLPA2743NLPA2744NLPA2748NL PA2749NL
PA2750NLPA2751NLPA2756NLPA2757NL
Impedance Plots
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
2
SMT Common Mode Chokes
1.0A to 20.0A
PA2670NLPA3927NL PG1265NL
0
500
1000
1500
2000
2500
3000
3500
0.11 10 10
0
0
5000
10000
15000
20000
25000
30000
0.1110 10
0
Frequency (MHz)
Im
pedance
(ohms)
PA2752NL
Impedance Plots
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
3
SMT Common Mode Chokes
1.0A to 20.0A
PoleCat - PA2743NL, PA2744NL, PA2745NL, PA2746NL, PA2747NL , PA2748NL and PA3927NL
Schematic
Schematic
Please note that for PA2741NL and PA2742NL the part should be connected as follows:
Customer to connect pins (1,2) and (4,3) together on board to form a single winding (1,2-4,3).
Customer to connect pins (8,7) and (5,6) together on board to form a single winding (8,7-5,6)
All ratings (leakage and DCR) are with respect to the above winding configuration.
Mechanicals
Low Shasta - PA2741NL High Shasta - PA2742NL
Polecat Dimensions
Part Number A B X Y Z
PA2743NL 13.0 13.0 8.4 10.4 5.6
PA2744NL 13.0 13.0 8.4 10.4 5.6
PA2745NL 13.2 13.2 8.6 10.7 5.6
PA2746NL 13.2 13.2 8.6 10.7 5.6
PA2747NL 13.5 13.5 8.6 10.7 5.6
PA2748NL 12.7 13.2 8.4 10.4 5.6
PA3927NL 13.0 13.0 8.4 10.4 8.6
A
Schematic
B
X
Z
Y
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
4
SMT Common Mode Chokes
1.0A to 20.0A
LCCI-37 - PA2749NL
LCCI-44LP - PA2751NL
LCCI-44 - PA2750NL
LCCI-50 - PA2752NL
Schematic
Schematic
Schematic
14.22
8.6 ±
13.46±
8.9
16.4 MAX
13.21±
9.4 ±
15.49±
0,127
18.16 MAX
15.24±
14.99
9.4 ±
15.49±
9.91
18.16 MAX
15.24±
17.02 11.3±
16.76±
9.91
19.56 MAX
16.51±
15.0 MAX
7,62 MAX
0,127
15.24
18.2 MAX
0,381
Schematic
Mechanicals
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
5
SMT Common Mode Chokes
1.0A to 20.0A
19,05 MAX
7.62
2,03
17,02
11,94
11,2 MAX
0,127
16,89
21.1
Schematic
Makeni - PA2754NL, PA2755NL
LCCI-50 - PA2753NL and PA2756NL
Schematic
17.02 11.3±
16.76±
9.91
19.56 MAX
16.51±
Mechanicals
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
P688.O (09/19)
6
SMT Common Mode Chokes
1.0A to 20.0A
HCCI-80 - PA2757NL
Schematic
Mechanical
4
1
2
3
1:1 ±2%
HCCI-80 - PA2670NL and PG1265NL
Schematic
4
1
2
3
1:1 ±2%
P688.O (09/19)
power.pulseelectronics.com http://www.power.pulseelectronics.com/contact
Pulse Worldwide
Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
U.S.A.
Tel: 858 674 8100
Fax: 858 674 8262
Pulse Europe
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen, P.R.
China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
3 Fraser Street
0428 DUO Tower
Singapore 189352
Tel: 65 6287 8998
Fax: 65 6280 0080
Pulse North Asia
1F, No.111
Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 886 3 4356768
Fax: 886 3 4356820
For More Information
Performance warranty of products oered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
7