Quadrature Hybrid,
20 - 40 MHz
Rev. V3
JH-114 / JHS-114 / JH-133
1
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1
Features
Octave Bandwidth
3o Maximum Phase Deviation from 90o
Low Loss: 0.5 dB Max.
Impedance: 50 Ohms Nominal
Input Power: 5 Watts Max.@ 25°C, Derated to 1
Watt @ 100oC
Typical Phase Linearity: 3o from Straight Line
MIL-STD-202 Screening Available
Description
3 dB Hybrids are ideal for dividing a signal into two
signals of equal amplitude and a constant 90o or
180o phase differential and for Quadrature
combining or performing summation/differential
combining.
FP-2 (JH-114)
SF-1 (JHS-114)
TO-8-2 (JH-133)
Quadrature Hybrid,
20 - 40 MHz
Rev. V3
JH-114 / JHS-114 / JH-133
2
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2
OUT
IN
A B C D
A ISO 0° -90°
B ISO -90° 0°
C 0° 90° ISO
D -90° 0° ISO
Electrical Specifications1: TA = -55°C to +85°C
Parameter Test Conditions Frequency Units Min Typ Max
Insertion Loss 2 Less Coupling 20 - 40 MHz dB — — 0.5
Isolation — 20 - 40 MHz dB 20 — —
Amplitude Balance — 20 - 40 MHz dB — — 0.75
VSWR — 20 - 40 MHz Ratio — — 1.2:1
Deviation from Quadrature — 20 - 40 MHz ° — — 3
1. All specifications apply with 50 ohm source and load impedance.
2. Average of coupled output less 3 dB.
This product contains elements protected by United States Patent Number 3,484,724.
Phasing Diagram Pin Configuration (JH-114)
Pin No. Function Pin No. Function
1 A 5 D
2 GND 6 GND
3 GND 7 GND
4 B 8 C
Pin Configuration (JHS-114)
Pin No. Function Pin No. Function
1 A 3 D
2 B 4 C
Pin Configuration (JH-133)
Pin No. Function Pin No. Function
1 GND 7 GND
2 B 8 D
3 GND 9 GND
4 GND 10 GND
5 A 11 C
6 GND 12 GND
All other pins and case are ground.
Quadrature Hybrid,
20 - 40 MHz
Rev. V3
JH-114 / JHS-114 / JH-133
3
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
3
Typical Performance Curves
Ordering Information
Part Number Package
JH-114 PIN FP-2
JHS-114 PIN SF-1
JH-133 PIN TO-8-2
Quadrature Hybrid,
20 - 40 MHz
Rev. V3
JH-114 / JHS-114 / JH-133
4
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
4
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.
