COPAL ELECTRONICS WIREWOUND MULTITURN TYPE M series Basic construction Wirewound multiturn type RoHS compliant FEATURES Line-up includes products ranging from 3 to 10 turns Cost effective (M-22E10) in house comparison Dial can be attached (M-22 series only) PART NUMBER DESIGNATION M - 1 3 0 3 1 0 0 Series name Nominal resistance value () M-1303, M-1305, M-22S10 M-22E10-000, M-22E10-050 100, 200, 500, 1 k, 2 k, 5 k, 10 k, 20 k, 50 k LIST OF PART NUMBERS Item Nominal resistance value () Part number No. of turn 3 turns M-1303 Resistance value 1 M-1305 Resistance value M-22S10 Resistance value 100, 200, 500, 1 k, 2 k, 5 k, 10 k, 20 k 5 turns 10 turns 100, 200, 500, 1 k, 2 k, 5 k, 10 k, 20 k, 50 k M-22E10-000 Resistance value 2 M-22E10-050 1 : M-1303 200 model is manufactured upon receipt of order basis. 2 : For M-22E10 series, plese refer to the drawing for its shaft size. : Verify the above part numbers when placing orders. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, 2005 COPAL ELECTRONICS M series POTENTIOMETERS STANDARD SPECIFICATIONS Item M-13 series Part number M-1303 Resistance torelance % Independent linearity % End resistance, maximum 5 0.5 0.2 2 % or 4 , whichever is greater 0.5 % or 1 , whichever is greater 1080 Effective electrical angle 1080 Mechanical angle W Power rating 1800 10 1800 0.75 3600 10 Insulation resistance 2 1000 (at DC 500 V) 14.7 {150} mN*m {gf*cm} maximum Strength of tighten screw N*m {kgf*cm} maximum Stop strength N*m {kgf*cm} maximum 9.81 {100} Temp. coefficient resistance M-22E10-000 M-22E10-050 0.784 {8} 0.588 {6} 0.98 {10} 0.147 {1.5} 0.196 {2} maximum Peak noise 20 (at 4 min-1) 50 ppm/C Operating temp. range - 40 ~ 85 C 15000 cycles Rotational life Net weight +10 0 1000 1 min M minimum Rotational torque 3600 1 Vrms Dielectric strength M-22 series M-22S10 M-22E10 M-1305 25000 cycles Approx. 7 g Approx. 19 Approx. 17 NOMINAL RESISTANCE * RESOLUTION * RATED VOLTAGE * RATED CURRENT Nominal resistance value () Resolution (%) M-22S10 M-22E10 Rated voltage (V) M-22S10 M-22E10 Rated current (mA) M-22S10 M-22E10 100 200 500 1k 2k 5k 10k 20 k 50 k 100 k 0.041 0.036 0.029 0.025 0.018 0.017 0.018 0.014 0.011 A 0.009 14.1 20.0 31.6 44.7 63.2 100.0 141.1 200.1 141.8 100.0 63.2 44.7 31.6 20.0 14.1 10.1 6.3 A 4.47 100 200 500 1k 2k 5k 10 k 20 k Resolution (%) M-1303 0.190 A 0.154 0.115 0.072 0.056 0.069 0.053 0.038 M-1305 0.137 0.095 0.078 0.057 0.047 0.051 0.039 0.032 Rated voltage (V) M-1303 8.7 A 12.2 19.4 27.4 38.7 61.2 86.6 122.5 M-1305 10.0 14.1 22.4 31.6 44.7 70.7 100.0 141.4 200.0 A 200.0 Rated current (mA) M-1303 86.2 A 61.5 38.7 28.5 19.4 12.3 8.7 6.1 The products indicated by A mark are manufactured upon receipt of order basis. M-1305 100.0 70.9 44.6 31.6 22.4 14.1 10.0 7.1 RATED POWER DERATING CURVE 100 Power rating ratio (%) Nominal resistance value () 316.2 A 450.0 - 40 + 40 Ambient temperature (C) + 85 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, 2005 COPAL ELECTRONICS M series POTENTIOMETERS OUTLINE DIMENSIONS (Unit: mm) M-1303 (3 turns) M-1305 (5 turns) Wiring diagram M 6 (P = 0.75) 2 13 8 0.3 9.7 0.3 0.3 3 1 1 0.7 3 2 0.6 4 3 8 (14.5) 2.8 0 3 -0.05 10 3 2 0.8 hole 2 2 CW 0.5 1.2 10 6.5 16.1 M-22S10 (10 turns) 40 ax . 3-3 6m 3 - 1.5 4.5 (10) 4 0.8 10.3 -0.01 -0.04 0 6 -0.02 22 R1 M9 (P=0.75) 6.4 1.2 15 1.6 (23) 18.5 (41.5) M-22E10 (10 turns) 40 6m ax . 3-3 6.1 (7.2) 5.7 R1 3 - 1.5 0.8 0 10.3 -0.06 0 6 -0.05 22 A 1.2 6.5 15 1.5 (23) 21 Part number 19 (42) Mark A M-22E10-000 3/8" 32 UNEF M-22E10-050 M 9 (P = 0.75) MC1003, JC10, M-1303, M-1305 For mm size For inch size (M-22E10-000, (M-22E10-050, M-22S10 in common) in common M-22E10-010 in common) M9, P=0.75 M6, P=0.75 6.4 9 2 11 0.63 1.3 12 2 3/8 inch 32 UNEF 9.4 12.9 0.5 1 12.7 2.3 10 15 0.45 0.9 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Oct, 2005