105
MEDER electronic
www.meder.com
KSK-1A35-...
CHARACTERISTICS
• Glass length of 10.5 mm and diameter of 2.1 mm
• Normally open 1 Form A contact
CONTACT DATA
ORDER INFORMATION
Part Number Example -
KSK - 1A35 - 1015
1015 is the AT range (Any AT can be ordered
between 10 & 30 in a minimum range of 2 AT)
All Data at 20 oCSwitch Model →
Contact Form →
KSK-1A35-...
Form A
Contact Ratings Conditions Min. Typ. Max. Units
Switching Power* Any DC combination of V and A not
to exceed their individual max.’s 20 W
Switching Voltage DC or peak AC 200 V
Switching Current DC or peak AC 1.0 A
Carry Current DC or peak AC 1.25 A
Static Contact Resistance at 0.5 V & 10 mA 150 mΩ
Dynamic Contact Resistance measured w/ 0.5 V & 50 mA, 1.5 ms
after closure 200 mΩ
Insulation Resistance cross Contacts 100 Volts applied 1012 Ω
Breakdown Voltage > 60 sec. 320 VDC
Operate Time incl. Bounce 100 % overdrive 0.5 ms
Release Time measured with/ no coil suppression 0.1 ms
Capacitance at 10 kHz across contact pF
Test Coil KMS-01
Standard AT range 10 30 AT
Environmental Data
Shock Resistance 1/2 sine wave for 11 ms 50 g
Vibration Resistance 10 - 2000 Hz 20 g
Ambient Temperature max. 10 oC / minute allowance -20 130 oC
Stock Temperature max. 10 oC / minute allowance -55 130 oC
Soldering Temperature 5 sec. dwell 260 oC
Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch.
* For life expectancy, please see the “Life Requirements” section.
Series Contact Form Switch Model AT Range
(between)
KSK - 1A 35 - xxxx
Options 10 -30
DIMENSIONS
All dimensions in mm [inches]
