KSK-1A35-... MEDER electronic DIMENSIONS CHARACTERISTICS All dimensions in mm [inches] * Glass length of 10.5 mm and diameter of 2.1 mm * Normally open 1 Form A contact CONTACT DATA Switch Model Contact Form All Data at 20 oC Contact Ratings Conditions KSK-1A35-... Form A Max. Units Switching Power* Any DC combination of V and A not to exceed their individual max.'s Min. Typ. 20 W Switching Voltage DC or peak AC 200 V Switching Current DC or peak AC 1.0 A Carry Current DC or peak AC 1.25 A Static Contact Resistance at 0.5 V & 10 mA 150 m Dynamic Contact Resistance measured w/ 0.5 V & 50 mA, 1.5 ms after closure 200 m Insulation Resistance cross Contacts 100 Volts applied 1012 Breakdown Voltage > 60 sec. 320 Operate Time incl. Bounce 100 % overdrive 0.5 ms Release Time measured with/ no coil suppression 0.1 ms Capacitance at 10 kHz across contact VDC pF Test Coil KMS-01 Standard AT range 10 30 AT g Environmental Data Shock Resistance 1/2 sine wave for 11 ms 50 Vibration Resistance 10 - 2000 Hz 20 g Ambient Temperature max. 10 C / minute allowance -20 130 o Stock Temperature max. 10 oC / minute allowance -55 130 o C Soldering Temperature 5 sec. dwell 260 o C o C Note: The indicated electric data are maximum values can vary downwards when using a more sensitive switch. * For life expectancy, please see the "Life Requirements" section. ORDER INFORMATION Part Number Example - KSK - 1A35 - 1015 1015 is the AT range (Any AT can be ordered between 10 & 30 in a minimum range of 2 AT) Series Contact Form Switch Model AT Range (between) KSK - 1A 35 - xxxx Options 10 -30 www.meder.com 105