RP12200L103BWB - VISHAY - Product.Network

RP12

www.vishay.com Vishay MCB

Revision: 25-Jan-18 1Document Number: 32524

For technical questions, contact: mcbprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Analog Linear Displacement Sensor

DESIGN SUPPORT TOOLS

FEATURES

• Conductive plastic potentiometer technology.

Infinite resolution

• Anodized light alloy housing

• Stainless steel floating shaft

• Flange mounting

•Wire outputs

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

• Nothing stated herein shall be construed as a guarantee of quality or durability

QUICK REFERENCE DATA

Sensor type LINEAR, conductive plastic

Output type Output by wires

Market appliance Industrial

Dimensions Diameter 1/2" (12.7 mm)

click logo to get started

Available

Models

ELECTRICAL SPECIFICATIONS

PARAMETER

Theoretical electrical travel UET +1 mm to 0 mm

Independent linearity standard ± 0.5 %

Independent linearity optional ± 0.1 % (UET  50 mm), ± 0.25 % (UET  50 mm)

Tolerance on Rn± 20 %

Temperature coefficient -300 ± 300 ppm/°C

Wiper current  1 mA

Recommended load impedance  1000 Rn

Dielectric strength 500 VRMS, 50 Hz, 1 min

Insulation resistance  10 G at 500 VDC

Output smoothness  0.1 %

Useful electrical travel (UET) 10 mm 25 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 300 mm

Power rating at +70 °C

(0.2 W/cm of travel) 0.2 W 0.5 W 1.0 W 1.5 W 2.0 W 3.0 W 4.0 W 5.0 W 6.0 W

Total resistance Rn2.2 k4.7 k4.7 k10 k10 k10 k10 k22 k22 k

MECHANICAL SPECIFICATIONS

PARAMETER

Mechanical travel UET + 4 mm

Driving force  2 N

Backlash < 15 μm

Protection class IP 64

Maximum displacement speed 1.5 m/s

Mounting 1 block (UET < 100 mm) and 2 blocks (UET 100 mm)

Useful electrical travel (UET) 10 mm 25 mm 50 mm 75 mm 100 mm 150 mm 200 mm 250 mm 300 mm

Weight Shaft + wiper 4 g 6 g 8 g 11 g 13 g 18 g 23 g 28 g 33 g

Sensor 20 g 22 g 27 g 30 g 40 g 51 g 65 g 75 g 86 g

PERFORMANCE

PARAMETER

Operating temperature range -40 °C to +105 °C

Storage temperature range -55 °C to +125 °C

Life 20M cycles

RP12

www.vishay.com Vishay MCB

Revision: 25-Jan-18 2Document Number: 32524

For technical questions, contact: mcbprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

SAP PART NUMBERING GUIDELINES

MODEL USEFUL ELECTRICAL TRAVEL (mm) TYPE VALUE LINEARITY LEADS PACKAGING

RP12 010

025

050

075

100

150

200

250

300

L = linear 222 = 2K2

472 = 4K7

103 = 10K

223 = 22K

In accordance

with UET, see

“Electrical

Specifications”

B = 0.5 % W = wire b = bulk

DIMENSIONS in millimeters

FRONT PIVOT OPTION (ON REQUEST) REAR PIVOT OPTION (ON REQUEST)

STRAIGHT OR RIGHT ANGLE CONNECTOR OPTION (ON REQUEST)

12.7Ø

Mounting block

(on request)

2 x Ø 3.2 diam. holes

Teon wires

gauge 26

length 300

25 L = UET + 37

18Ø

Ø5

thickness 8

L = 44 ± 2.5

18Ø

thickness 8

27 ± 1.5

38.5

18Ø

26.5

Wires

L = UET + 56.5

15Ø

L = UET + 37 58

31.2

37.2

Cable customer

15Ø

RP12

www.vishay.com Vishay MCB

Revision: 25-Jan-18 3Document Number: 32524

For technical questions, contact: mcbprecisionpot@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ELECTRICAL DIAGRAM

Direction of wiper displacement with shaft extended

CONNECTION

OPTIONS (on request)

• Other linearity

• Probe version for UET < 100 mm (spring and tip)

• Low driving force version ( 30 cN/ IP 50)

• Lateral or axial cable output

• Binder 713-M12 series straight connector output

• Binder 713-M12 series right angle connector output

• Male socket fitted on connector

• Additional mounting block

• Front pivot

• Rear pivot (only with lateral cable output)

Green

Red

Yellow

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.