Aluminum Electrolytic Capacitor/FC
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
EE83
A
.
FC
FC
Series: Type :A
-55 to + 105°C
6.3 to 100 V .DC
1.0 to 15000 µ F
±20 % (120Hz/+20°C)
Japan
Malaysia
China
Low impedance
Radial Lead Type
■ Features
Categor y temp. range
Rated W.V. Range
Nominal Cap. Range
■ Specifications
DC Leakage Current
tan δ
Capacitance Tolerance I < 0.01 CV or 3(µ A)
60 120 1k
10k
100k
0.55 0.65 0.85 0.90 1.0
Body Dia. φD
Body Length L
Lead Dia. φd
Lead space P
15to25 30 to 35
0.45 0.45 0.45 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8
1.5 2 2.5 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5
4 5 6.3 4 5 6.3 8 10 12.5 16 18
6.3 to 100
1.0 to 330
390 to 1000
1200 to 2200
2700 to 15000 0.75 0.80 0.90 0.95 1.0
0.80 0.85 0.95 1.00 1.0
0.70 0.75 0.90 0.95 1.0
L=7 L >11
(>6.3mm dia)
L
L<16:L+1.0max
φd±
0.05
14 min 3
min
φD+0.5 max
φ10<
P
±
0.5
φD+0.5 max
φ8>
P
±
0.5
L>20:L+2.0 max
Endurance
Shelf Life
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
Duration : 1000 hours (φ4 to 6.3), 2000hours (φ8), 3000 hours (φ10), 5000 hours (φ12.5 to 18)
Post test requirement at +20 °C
Capacitance change
tan δ
DC leakage current
±20% of initial measured value
< 200 % of initial specified value
< initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
■
W.V.(V.DC)
Capacitance
(µF)
Frequency(Hz)
Sleeve
Vent
■ Dimensions in mm (not to scale)
W.V.(V)
tan δ
6.3 10 16 25 35 50 63 100
0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000µF, add 0.02 per every 1000 µF.
after 2 minutes application of rated working voltage at +20°C(Whichever is greater)
Frequency correction factor for ripple current
Endurance : 105°C (1000 to 5000 h)
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
at +20 °C, capacitor shall meet the limits specified in Endurance. (With voltage treatment)
meet the limits specified below.
Aluminum Electrolytic Capacitor/FC
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail.
EE84
❉1; Apply to 1µF
❉2; Apply to 2.2, 3.3, 4.7, 10L, 12, 18, and 22µF
❉3 Case size
φ D×L (mm) Capacitance
(µF) Impedance Ω/100kHz
20°C -10°C
Ripple Current
mA r.m.s
/100 kHz
5 ×11
1.0
2.2
3.3
4.7
10L
12
15
18
22
2.40
1.30
1.30
1.30
1.30
1.30
1.30
1.30
1.30
4.80
2.60
2.60
2.60
2.60
2.60
2.60
2.60
2.60
20
45
65
95
125
135
145
155
155
Case size/ Impedance/ Ripple Current
W.V(V.DC) 6.3 V to 35V 50V 63V 100V
Impedance
Ω/100kHz Ripple
Current
mA r.m.s
/100 kHz
20°C -10°C20°C -10°C
Case size
(φD×L)
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
4
5
5
6.3
6.3
8
8
8
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
16
16
16
18
18
18
18
18
18
11
11
15
11.2
15
11.5
15
20
12.5
16
20
25
30
15
20
25
30
35
40
15
20
25
31.5
35.5
40
15
20
25
31.5
35.5
40
1.30
0.80
0.50
0.35
0.25
0.117
0.085
0.065
0.090
0.068
0.052
0.045
0.035
0.065
0.038
0.030
0.025
0.022
0.018
0.043
0.029
0.022
0.018
0.016
0.015
0.038
0.028
0.020
0.016
0.015
0.014
2.60
1.60
1.00
0.700
0.500
0.234
0.170
0.130
0.180
0.136
0.104
0.090
0.070
0.130
0.076
0.060
0.050
0.044
0.036
0.086
0.058
0.044
0.036
0.032
0.030
0.076
0.056
0.040
0.032
0.030
0.028
120
175
235
290
400
555
730
995
765
1050
1220
1440
1815
1205
1655
1945
2310
2510
2655
1690
2205
2555
3010
3150
3360
2000
2490
2740
3635
3680
3735
2.50
2.4 ❉1
1.3 ❉2
0.90
0.60
0.40
0.234
0.155
0.120
0.160
0.119
0.090
0.082
0.060
0.110
0.063
0.050
0.040
0.034
0.030
0.080
0.048
0.034
0.028
0.025
0.023
0.068
0.042
0.029
0.025
0.023
-
5.00
4.8 ❉1
2.6 ❉2
1.80
1.20
0.80
0.468
0.310
0.240
0.324
0.238
0.180
0.164
0.120
0.220
0.126
0.100
0.080
0.068
0.060
0.160
0.096
0.068
0.056
0.050
0.046
0.136
0.084
0.058
0.050
0.046
-
90
❉3
❉3
215
260
360
485
635
860
615
850
1030
1200
1610
1150
1480
1832
2215
2285
2590
1610
1835
2235
2700
2790
2845
1900
2420
2610
3000
3100
-
3.50
2.00
1.30
1.00
0.70
0.342
0.230
0.178
0.256
0.194
0.147
0.130
0.090
0.150
0.085
0.070
0.055
0.047
0.042
0.090
0.059
0.050
0.043
0.036
0.030
0.086
0.055
0.043
0.032
0.030
0.025
7.00
4.00
2.60
2.00
1.40
0.684
0.460
0.356
0.512
0.368
0.294
0.260
0.180
0.300
0.170
0.140
0.110
0.094
0.084
0.180
0.118
0.100
0.080
0.072
0.060
0.172
0.110
0.086
0.064
0.060
0.050
80
145
200
240
330
405
535
690
535
600
885
1050
1300
1020
1285
1720
2090
2265
2560
1410
1765
2160
2670
2770
2825
1690
2290
2585
2950
3095
3205
20°C -10°C20°C -10°C
8.200
5.600
3.600
2.200
1.360
0.900
0.660
1.060
0.720
0.480
0.420
0.300
0.460
0.360
0.220
0.196
0.174
0.144
0.280
0.220
0.178
0.124
0.106
0.094
0.240
0.160
0.140
0.124
0.082
0.072
80
90
114
155
260
340
455
306
400
463
599
698
511
671
807
937
1040
1130
793
995
1170
1520
1730
1920
917
1230
1420
1600
1770
2300
Impedance
Ω/100kHz Impedance
Ω/100kHz Impedance
Ω/100kHz
Ripple
Current
mA r.m.s
/100 kHz
Ripple
Current
mA r.m.s
/100 kHz
Ripple
Current
mA r.m.s
/100 kHz
4.100
2.800
1.800
1.100
0.680
0.450
0.330
0.530
0.360
0.240
0.210
0.150
0.230
0.180
0.110
0.098
0.087
0.072
0.140
0.110
0.089
0.062
0.053
0.047
0.120
0.080
0.070
0.062
0.041
0.036
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE85
A
.
FC
27 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC0J270( ) 200 2000
56 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC0J560( ) 200 2000
68 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC0J680( ) 200 2000
100 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC0J101( ) 200 2000
120 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC0J121( ) 200 2000
150 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC0J151( ) 200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.0 5.0 2.5 EEUFC0J221( ) 200 2000
270 6.3 11.2 290 0.350 1000 0.50 2.0 5.0 2.5 EEUFC0J271( ) 200 2000
330 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC0J331S( ) 200 2000
6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC0J331( ) 200 2000
390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J391( ) 200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J471( ) 200 1000
560 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC0J561( ) 200 1000
820 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC0J821L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J821( ) 200 500
1000 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC0J102( ) 200 500
1200 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC0J122L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC0J122( ) 200 500
1500 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC0J152( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC0J152S( ) 200 500
1800 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J182( ) 200 500
2200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC0J222( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J222S( ) 100 250
2700 10 30 1815 0.035 3000 0.60 5.0 EEUFC0J272L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J272( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC0J272S( ) 100 250
3300 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC0J332( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC0J332S( ) 100 250
3900 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC0J392( ) 200 500
4700 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC0J472 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J472S( ) 100 250
5600 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC0J562L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC0J562( ) 100 250
6800 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC0J682L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC0J682( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC0J682S( ) 100 250
8200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC0J822 100
10000 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC0J103 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC0J103S( ) 100 250
12000 16 40 3360 0.015 5000 0.80 7.5 EEUFC0J123L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC0J123 50
15000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC0J153 50
22 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC1A220( ) 200 2000
6.3
10
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
❉H
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length
Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.
H=2.5mm.
❉B
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE86
10
39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1A390( ) 200 2000
47 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1A470( ) 200 2000
82 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A820( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1A820( ) 200 2000
100 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1A101S( ) 2 0 0 2000
5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1A101( ) 200 2000
150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A151( ) 200 2000
180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A181( ) 200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1A221S( ) 2 0 0 2000
6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1A221( ) 200 2000
330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A331( ) 200 1000
390 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A391( ) 200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1A471( ) 200 1000
560 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A561( ) 200 500
680 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1A681L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1A681( ) 200 500
820 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A821( ) 200 500
1000 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1A102L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1A102( ) 200 500
1200 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1A122( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1A122S( ) 2 0 0 5 00
1500 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1A152( ) 200 500
1800 12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A182( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1A182S( ) 1 00 2 5 0
2200 10 30 1815 0.035 3000 0.60 5.0 EEUFC1A222L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1A222( ) 200 500
2700 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1A272( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1A272S( ) 1 00 2 5 0
3300 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1A332 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A332S( ) 1 00 2 5 0
3900 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1A392L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1A392( ) 100 250
4700 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1A472L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A472( ) 100 250
5600 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1A562( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1A562S( ) 1 00 2 5 0
6800 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1A682 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1A682S( ) 1 00 2 5 0
8200 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1A822L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1A822 50
10000 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1A103 50
12000 18 40 3735 0.014 5000 0.80 7.5 EEUFC1A123 50
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
❉H
Lead Space Part No.
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length
Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
Specification
❉B
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.
H=2.5mm.
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE87
A
.
FC
15 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC1C150( ) 200 2000
27 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1C270( ) 200 2000
39 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1C390( ) 200 2000
47 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C470( ) 200 2000
56 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C560( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1C560( ) 200 2000
68 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1C680( ) 200 2000
82 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1C820( ) 200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C101( ) 200 2000
120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C121( ) 200 2000
180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1C181( ) 200 2000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C221( ) 200 1000
270 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C271( ) 200 1000
330 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1C331( ) 200 1000
390 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C391( ) 200 500
470 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1C471L( ) 2 00 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1C471( ) 200 500
560 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C561( ) 200 500
680 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1C681L( ) 2 00 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1C681( ) 200 500
820 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C821( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1C821S( ) 20 0 5 00
1000 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1C102S( ) 20 0 5 00
10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C102( ) 200 500
1200 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1C122( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C122S( ) 10 0 2 5 0
1500 10 30 1815 0.035 3000 0.60 5.0 EEUFC1C152L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1C152( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1C152S( ) 10 0 2 5 0
1800 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C182( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1C182S( ) 10 0 2 5 0
2200 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1C222( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C222S( ) 10 0 2 5 0
2700 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1C272L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1C272( ) 100 250
3300 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1C332 100
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C332S( ) 1 0 0 2 5 0
3900 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1C392( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1C392S( ) 100 250
4700 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1C472 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1C472S( ) 10 0 2 5 0
5600 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1C562L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1C562 50
16
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
❉H
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.
H=2.5mm.
❉B
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE88
6800 16 40 3360 0.015 5000 0.80 7.5 EEUFC1C682 100
8200 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1C822 50
10 4 7 65 2.0 1000 0.45 1.5 5.0 2.5 EEAFC1E100( ) 200 2000
22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1E220( ) 200 2000
27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5 EEUFC1E270( ) 200 2000
39 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E390( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1E390( ) 200 2000
47 5 11 175 0.80 1000 0.50 2.0 5.0 2.5 EEUFC1E470( ) 200 2000
56 5 15 235 0.50 1000 0.50 2.0 5.0 2.5 EEUFC1E560( ) 200 2000
82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1C820( ) 200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1E101S( ) 2 0 0 2000
120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1E121( ) 200 2000
180 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E181( ) 200 1000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1E221( ) 200 1000
270 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E271( ) 200 500
330 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1E331L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1E331( ) 200 500
390 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E391( ) 200 500
470 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1E471L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1E471( ) 200 500
560 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E561( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1E561S( ) 2 0 0 5 00
680 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1E681( ) 200 500
820 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1E821( ) 200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E821S( ) 2 0 0 5 00
1000 10 30 1815 0.035 3000 0.60 5.0 EEUFC1E102L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1E102( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1E102S( ) 1 00 2 5 0
1200 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E122( ) 200 500
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1E122S( ) 1 00 2 5 0
1500 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1E152( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E152S( ) 1 00 2 5 0
1800 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1E182L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1E182( ) 100 250
2200 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1E222 100
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1E222S( ) 1 00 2 5 0
2700 16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1E272( ) 100 250
3300 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1E332 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1E332S( ) 1 00 2 5 0
3900 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1E392L 100
18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1E392 50
4700 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1E472 50
5600 18 40 3735 0.014 5000 0.80 7.5 EEUFC1E562 50
25
16
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.
H=2.5mm.
❉B❉H
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE89
A
.
FC
6.8 4 7 65 2.000 1000 0.45 1.5 5.0 2.5 EEAFC1V6R8( ) 200 2000
12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5 EEAFC1V120( ) 200 2000
18 4 11 120 1.300 1000 0.45 1.5 5.0 2.5 EEUFC1V180( ) 200 2000
22 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V220( ) 200 2000
27 5 11 175 0.800 1000 0.50 2.0 5.0 2.5 EEUFC1V270( ) 200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5 EEAFC1V270( ) 200 2000
33 5 11 175 0.080 1000 0.50 2.0 5.0 2.5 EEUFC1V330( ) 200 2000
39 5 15 235 0.500 1000 0.50 2.0 5.0 2.5 EEUFC1V390( ) 200 2000
47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V470( ) 200 2000
56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V560( ) 200 2000
68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5 EEUFC1V680( ) 200 2000
82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5 EEUFC1V820( ) 200 2000
100 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V101( ) 200 1000
120 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V121( ) 200 1000
150 8 11.5 555 0.117 2000 0.60 3.5 5.0 EEUFC1V151( ) 200 1000
180 10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V181( ) 200 500
220 8 15 730 0.085 2000 0.60 3.5 5.0 EEUFC1V221L( ) 200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0 EEUFC1V221( ) 200 500
270 10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V271( ) 200 500
330 8 20 995 0.065 2000 0.60 3.5 5.0 EEUFC1V331L( ) 200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0 EEUFC1V331( ) 200 500
390 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V391( ) 200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0 EEUFC1V391S( ) 200 5 00
470 10 20 1220 0.052 3000 0.60 5.0 5.0 EEUFC1V471( ) 200 500
560 10 25 1440 0.045 3000 0.60 5.0 5.0 EEUFC1V561( ) 200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V561S( ) 200 5 00
680 10 30 1815 0.035 3000 0.60 5.0 EEUFC1V681L 100
12.5 20 1655 0.038 5000 0.60 5.0 5.0 EEUFC1V681( ) 200 500
16 15 1690 0.043 5000 0.80 7.5 7.5 EEUFC1V681S( ) 100 2 50
820 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V821L( ) 200 5 00
18 15 2000 0.038 5000 0.80 7.5 7.5 EEUFC1V821( ) 100 250
1000 12.5 25 1945 0.030 5000 0.60 5.0 5.0 EEUFC1V102( ) 200 500
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V102S( ) 100 2 50
1200 12.5 30 2310 0.025 5000 0.80 5.0 EEUFC1V122L 100
16 20 2205 0.029 5000 0.80 7.5 7.5 EEUFC1V122( ) 100 250
1500 12.5 35 2510 0.022 5000 0.80 5.0 EEUFC1V152L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V152( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V152S( ) 100 2 50
1800 12.5 40 2655 0.018 5000 0.80 5.0 EEUFC1V182L 100
16 25 2555 0.022 5000 0.80 7.5 7.5 EEUFC1V182( ) 100 250
18 20 2490 0.028 5000 0.80 7.5 7.5 EEUFC1V182S( ) 100 2 50
2200 16 31.5 3010 0.018 5000 0.80 7.5 EEUFC1V222 100
18 25 2740 0.020 5000 0.80 7.5 7.5 EEUFC1V222S( ) 100 2 50
35
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
M in. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.
H=2.5mm.
❉B❉H
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE90
2700 16 35.5 3150 0.016 5000 0.80 7.5 EEUFC1V272L 100
35 18 31.5 3635 0.016 5000 0.80 7.5 EEUFC1V272 50
3300 18 35.5 3680 0.015 5000 0.80 7.5 EEUFC1V332 50
3900 18 40 3735 0.014 5000 0.80 7.5 EEUFC1V392 50
1.0 5 11 20 2.40 1000 0.50 2.0 5.0 2.5 EEUFC1H1R0( ) 200 2000
2.2 5 11 45 1.80 1000 0.50 2.0 5.0 2.5 EEUFC1H2R2( ) 200 2000
3.3 5 11 65 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H3R3( ) 200 2000
4.7 5 11 95 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H4R7( ) 200 2000
10 4 11 90 2.50 1000 0.45 1.5 5.0 2.5 EEUFC1H100( ) 200 2000
5 11 125 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H100L( ) 2 0 0 2000
12 5 11 135 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H120( ) 200 2000
15 5 11 145 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H150( ) 200 2000
18 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H180( ) 200 2000
22 5 11 155 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1H220( ) 200 2000
27 5 15 215 0.90 1000 0.50 2.0 5.0 2.5 EEUFC1H270( ) 200 2000
33 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H330( ) 200 2000
39 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H390( ) 200 2000
47 6.3 11.2 260 0.60 1000 0.50 2.5 5.0 2.5 EEUFC1H470( ) 200 2000
56 6.3 15 360 0.40 1000 0.50 2.5 5.0 2.5 EEUFC1H560( ) 200 2000
68 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H680( ) 200 1000
82 8 11.5 485 0.234 2000 0.60 3.5 5.0 EEUFC1H820( ) 200 1000
100 10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H101( ) 200 500
120 8 15 635 0.155 2000 0.60 3.5 5.0 EEUFC1H121L( ) 2 00 1000
10 12.5 615 0.162 3000 0.60 5.0 5.0 EEUFC1H121( ) 200 500
150 10 16 850 0.119 3000 0.6 5.0 5.0 EEUFC1H151( ) 200 500
180 8 20 860 0.120 2000 0.60 3.5 5.0 EEUFC1H181L( ) 20 0 1000
10 16 850 0.119 3000 0.60 5.0 5.0 EEUFC1H181( ) 200 500
220 10 20 1030 0.090 3000 0.60 5.0 5.0 EEUFC1H221( ) 200 500
12.5 15 1150 0.110 5000 0.60 5.0 5.0 EEUFC1H221S( ) 20 0 5 00
270 10 25 1200 0.082 3000 0.60 5.0 5.0 EEUFC1H271( ) 200 500
330 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H331L 100
12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H331( ) 200 500
390 12.5 20 1480 0.063 5000 0.60 5.0 5.0 EEUFC1H391( ) 200 500
16 15 1610 0.080 5000 0.80 7.5 7.5 EEUFC1H391S( ) 10 0 2 5 0
470 10 30 1610 0.060 3000 0.60 5.0 EEUFC1H471L 100
12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H471( ) 200 500
560 12.5 25 1832 0.050 5000 0.60 5.0 5.0 EEUFC1H561( ) 200 500
18 15 1900 0.068 5000 0.80 7.5 7.5 EEUFC1H561S( ) 10 0 2 5 0
680 12.5 30 2215 0.040 5000 0.80 5.0 EEUFC1H681L 100
16 20 1835 0.048 5000 0.80 7.5 7.5 EEUFC1H681( ) 100 250
820 12.5 35 2285 0.034 5000 0.80 5.0 EEUFC1H821L 100
18 20 2420 0.042 5000 0.80 7.5 7.5 EEUFC1H821( ) 100 250
1000 12.5 40 2590 0.030 5000 0.80 5.0 EEUFC1H102L 100
16 25 2235 0.034 5000 0.80 7.5 7.5 EEUFC1H102( ) 100 250
50
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q't y
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length
Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm. H=2.5mm.
❉B❉H
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE91
A
.
FC
63
1200 16 31.5 2700 0.028 5000 0.80 7.5 EEUFC1H122 100
18 25 2610 0.029 5000 0.80 7.5 7.5 EEUFC1H122S( ) 10 0 2 5 0
1500 16 35.5 2790 0.025 5000 0.80 7.5 EEUFC1H152L 100
1800 16 40 2845 0.023 5000 0.80 7.5 EEUFC1H182L 100
18 31.5 3000 0.025 5000 0.80 7.5 EEUFC1H182 50
2200 18 35.5 3100 0.023 5000 0.80 7.5 EEUFC1H222 50
6.8 4 11 80 3.50 1000 0.45 1.5 5.0 2.5 EEUFC1J6R8( ) 200 2000
12 5 11 145 2.0 1000 0.50 2.0 5.0 2.5 EEUFC1J120( ) 200 2000
18 5 15 200 1.30 1000 0.50 2.0 5.0 2.5 EEUFC1J180( ) 200 2000
22 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J220( ) 200 2000
33 6.3 11.2 240 1.0 1000 0.50 2.5 5.0 2.5 EEUFC1J330( ) 200 2000
39 6.3 15 330 0.70 1000 0.50 2.5 5.0 2.5 EEUFC1J390( ) 200 2000
47 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J470( ) 200 1000
56 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J560( ) 200 1000
68 8 11.5 405 0.342 2000 0.60 3.5 5.0 EEUFC1J680( ) 200 1000
82 10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J820( ) 200 500
100 8 15 535 0.230 2000 0.60 3.5 5.0 EEUFC1J101L( ) 200 1000
10 12.5 535 0.256 3000 0.60 5.0 5.0 EEUFC1J101( ) 200 500
120 10 16 600 0.194 3000 0.60 5.0 5.0 EEUFC1J121( ) 200 500
150 8 20 690 0.178 2000 0.60 3.5 5.0 EEUFC1J151( ) 200 1000
180 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J181( ) 200 500
12.5 15 1020 0.150 5000 0.60 5.0 5.0 EEUFC1J181S( ) 200 500
220 10 20 885 0.147 3000 0.60 5.0 5.0 EEUFC1J221X( ) 200 500
10 25 1050 0.130 3000 0.60 5.0 5.0 EEUFC1J221( ) 200 500
12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J221S( ) 200 500
270 16 15 1410 0.090 5000 0.80 7.5 7.5 EEUFC1J271( ) 100 250
330 10 30 1300 0.090 3000 0.60 5.0 EEUFC1J331L 100
12.5 20 1285 0.085 5000 0.60 5.0 5.0 EEUFC1J331( ) 200 500
390 12.5 25 1720 0.070 5000 0.60 5.0 5.0 EEUFC1J391( ) 200 500
18 15 1690 0.086 5000 0.80 7.5 7.5 EEUFC1J391S( ) 100 250
470 12.5 30 2090 0.055 5000 0.80 5.0 EEUFC1J471L 100
16 20 1765 0.059 5000 0.80 7.5 7.5 EEUFC1J471( ) 100 250
560 16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J561( ) 100 250
680 12.5 35 2265 0.047 5000 0.80 5.0 EEUFC1J681L 100
16 25 2160 0.050 5000 0.80 7.5 7.5 EEUFC1J681( ) 100 250
18 20 2290 0.055 5000 0.80 7.5 7.5 EEUFC1J681S( ) 100 250
820 12.5 40 2560 0.042 5000 0.80 5.0 EEUFC1J821L 100
16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J821 100
18 25 2585 0.043 5000 0.80 7.5 7.5 EEUFC1J821S( ) 100 250
1000 16 31.5 2670 0.043 5000 0.80 7.5 EEUFC1J102U 100
16 35.5 2770 0.036 5000 0.80 7.5 EEUFC1J102 100
1200 16 40 2825 0.030 5000 0.80 7.5 EEUFC1J122L 100
18 31.5 2950 0.032 5000 0.80 7.5 EEUFC1J122 50
1500 18 35.5 3095 0.030 5000 0.80 7.5 EEUFC1J152 50
1800 18 40 3205 0.025 5000 0.80 7.5 EEUFC1J182 50
50
(mm) (mm) (mm) (pcs) (pcs)
(µF) (mm) (mm)
(mm)
(mA) (Ω)
(V) (hours)
■
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.H=2.5mm.
❉B❉H
Endur-
ance
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
Design, Specifications are subject to change without notice. Ask factor y for technical specifications before purchase and/or use.
Whenever a doubt about safety ar ises from this product, please inform us immediately for technical consulation without fail.
EE92
(pcs) (pcs)
(mm)
(mm)
5.6
8.2
12
18
22
33
39
56
68
100
120
150
180
220
270
330
390
470
560
680
5
5
6.3
6.3
8
8
10
8
10
10
10
12.5
10
12.5
16
12.5
18
12.5
16
12.5
16
12.5
18
16
18
16
18
16
18
18
11
15
11.2
15
11.5
15
12.5
20
16
20
25
15
30
20
15
25
15
30
20
35
25
40
20
31.5
25
35.5
31.5
40
35.5
40
80
90
114
155
260
340
306
455
400
463
599
511
698
671
793
807
917
937
995
1040
1170
1130
1230
1520
1420
1730
1600
1920
1770
2300
4.1
2.8
1.8
1.1
0.68
0.45
0.53
0.33
0.36
0.24
0.21
0.23
0.15
0.180
0.140
0.110
0.120
0.098
0.110
0.087
0.089
0.072
0.080
0.062
0.070
0.530
0.062
0.047
0.041
0.036
1000
1000
1000
1000
2000
2000
3000
2000
3000
3000
3000
5000
3000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.60
0.80
0.60
0.80
0.60
0.80
0.60
0.80
0.60
0.80
0.80
0.80
0.80
0.80
0.80
0.80
0.80
2.0
2.0
2.5
2.5
3.5
3.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
EEUFC2A5R6( )
EEUFC2A8R2( )
EEUFC2A120( )
EEUFC2A180( )
EEUFC2A220( )
EEUFC2A330L( )
EEUFC2A330( )
EEUFC2A390L( )
EEUFC2A390( )
EEUFC2A560( )
EEUFC2A680L( )
EEUFC2A680( )
EEUFC2A101L
EEUFC2A101( )
EEUFC2A121S( )
EEUFC2A151( )
EEUFC2A151S( )
EEUFC2A181L
EEUFC2A181( )
EEUFC2A221L
EEUFC2A221( )
EEUFC2A271L
EEUFC2A271S( )
EEUFC2A331
EECFC2A331S( )
EEUFC2A391L
EEUFC2A391
EEUFC2A471
EEUFC2A561
EEUFC2A681
200
200
200
200
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
100
100
50
100
50
50
2000
2000
2000
2000
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
100
250
250
100
2.5
2.5
2.5
2.5
(mm) (mm) (mm)
(µF) (mm)
(mA) (Ω)
(V) (hours)
■
Lead Space Part No.
Specification
Dia. Length Taping
Case size
Cap.
(±20%) Lead
Dia.
W.V.
Straight
Min. Packaging Q'ty
Standard Products
Taping
Taping
Ripple
current
(100kHz)
(+105°C)
Lead Length Straight
Leads
Imped-
ance
(100kHz)
(+20°C)
Endur-
ance
When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5mm, 7.5mm.H=2.5mm.
Aluminum Electrolytic Capacitors/FC
The taping dimensions are explained on p.43 of our Catalog. Please use it as a reference guide.
