FQD1N60 / FQU1N60 April 2000 QFET TM FQD1N60 / FQU1N60 600V N-Channel MOSFET General Description Features These N-Channel enhancement mode power field effect transistors are produced using Fairchild's proprietary, planar stripe, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficiency switch mode power supply. * * * * * * 1.0A, 600V, RDS(on) = 11.5 @VGS = 10 V Low gate charge ( typical 5.0 nC) Low Crss ( typical 3.0 pF) Fast switching 100% avalanche tested Improved dv/dt capability D D ! " G S G D S FQD Series ! " " " G! I-PAK D-PAK FQU Series ! S Absolute Maximum Ratings Symbol VDSS TC = 25C unless otherwise noted Parameter ID Drain-Source Voltage - Continuous (TC = 25C) Drain Current IDM Drain Current FQD1N60 / FQU1N60 - Continuous (TC = 100C) - Pulsed (Note 1) Units 600 V 1.0 A 0.63 A 4.0 A VGSS Gate-Source Voltage 30 V EAS Single Pulsed Avalanche Energy (Note 2) 50 mJ IAR Avalanche Current (Note 1) 1.0 A EAR Repetitive Avalanche Energy Peak Diode Recovery dv/dt Power Dissipation (TA = 25C) * (Note 1) 3.0 4.5 2.5 mJ V/ns W 30 0.24 -55 to +150 W W/C C 300 C dv/dt PD (Note 3) Power Dissipation (TC = 25C) TJ, TSTG TL - Derate above 25C Operating and Storage Temperature Range Maximum lead temperature for soldering purposes, 1/8from case for 5 seconds Thermal Characteristics Symbol RJC RJA RJA Parameter Typ Max Units Thermal Resistance, Junction-to-Case -- 4.17 CW Thermal Resistance, Junction-to-Ambient * -- 50 CW Thermal Resistance, Junction-to-Ambient -- 110 CW * When mounted on the minimum pad size recommended (PCB Mount) (c)2000 Fairchild Semiconductor International Rev. A, April 2000 Symbol C = 25C unless otherwise noted Parameter Test Conditions Min Typ Max Units 600 -- -- V Off Characteristics BVDSS Drain-Source Breakdown Voltage VGS = 0 V, ID = 250 A BVDSS / TJ Breakdown Voltage Temperature Coefficient ID = 250 A, Referenced to 25C -- 0.4 -- V/C VDS = 600 V, VGS = 0 V -- -- 10 A VDS = 480 V, TC = 125C IDSS Zero Gate Voltage Drain Current -- -- 100 A IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 nA IGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 nA 3.0 -- 5.0 V -- 9.3 11.5 -- 0.83 -- S -- 120 150 pF -- 20 25 pF -- 3 4 pF -- 5 20 ns On Characteristics VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 A RDS(on) Static Drain-Source On-Resistance VGS = 10 V, ID = 0.5 A gFS Forward Transconductance VDS = 50 V, ID = 0.5 A (Note 4) Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDD = 300 V, ID = 1.2 A, RG = 25 (Note 4, 5) VDS = 480 V, ID = 1.2 A, VGS = 10 V (Note 4, 5) -- 25 60 ns -- 7 25 ns -- 25 60 ns -- 5 6 nC -- 1 -- nC -- 2.6 -- nC A Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current -- -- 1.0 ISM -- -- 4.0 A VSD Maximum Pulsed Drain-Source Diode Forward Current VGS = 0 V, IS = 1.0 A Drain-Source Diode Forward Voltage -- -- 1.4 V trr Reverse Recovery Time -- 160 -- ns Qrr Reverse Recovery Charge -- 0.3 -- C VGS = 0 V, IS = 1.2 A, dIF / dt = 100 A/s (Note 4) Notes: 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L = 92mH, IAS = 1.0A, VDD = 50V, RG = 25 , Starting TJ = 25C 3. ISD 1.2A, di/dt 200A/s, VDD BVDSS, Starting TJ = 25C 4. Pulse Test : Pulse width 300s, Duty cycle 2% 5. Essentially independent of operating temperature (c)2000 Fairchild Semiconductor International Rev. A, April 2000 FQD1N60 / FQU1N60 Electrical CharacteristicsT VGS 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V Bottom : 5.5 V 0 ID, Drain Current [A] 10 ID , Drain Current [A] Top : -1 10 0 10 150 25 -55 Notes : 1. VDS = 50V 2. 250s Pulse Test Notes : 1. 250s Pulse Test 2. TC = 25 -2 10 -1 -1 0 10 10 1 10 2 10 4 6 8 10 VGS , Gate-Source Voltage [V] VDS, Drain-Source Voltage [V] Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 30 VGS = 10V IDR , Reverse Drain Current [A] RDS(ON) [ ], Drain-Source On-Resistance 25 VGS = 20V 20 0 10 15 10 5 150 25 Notes : 1. VGS = 0V 2. 250s Pulse Test Note : TJ = 25 0 0.0 -1 0.5 1.0 1.5 2.0 2.5 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 ID, Drain Current [A] VSD , Source-Drain Voltage [V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 200 12 Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd VDS = 120V 10 150 Coss 100 Notes : 1. VGS = 0 V 2. f = 1 MHz Crss 50 VGS , Gate-Source Voltage [V] Ciss Capacitance [pF] FQD1N60 / FQU1N60 Typical Characteristics VDS = 300V VDS = 480V 8 6 4 2 Note : ID = 1.2 A 0 0 -1 10 0 10 1 10 VDS, Drain-Source Voltage [V] Figure 5. Capacitance Characteristics (c)2000 Fairchild Semiconductor International 0 1 2 3 4 5 QG, Total Gate Charge [nC] Figure 6. Gate Charge Characteristics Rev. A, April 2000 FQD1N60 / FQU1N60 Typical Characteristics (Continued) 3.0 1.2 BV DSS , (Normalized) Drain-Source Breakdown Voltage 2.5 RDS(ON) , (Normalized) Drain-Source On-Resistance 1.1 1.0 Notes : 1. VGS = 0 V 2. ID = 250 A 0.9 0.8 -100 -50 0 50 100 2.0 1.5 1.0 Notes : 1. VGS = 10 V 2. ID = 0.6 A 0.5 150 0.0 -100 200 -50 0 o 50 100 150 200 o TJ, Junction Temperature [ C] TJ, Junction Temperature [ C] Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. On-Resistance Variation vs. Temperature 1.00 Operation in This Area is Limited by R DS(on) 1 10 0.75 ID, Drain Current [A] ID, Drain Current [A] 100 s 1 ms 0 10 10 ms DC -1 10 Notes : 0.50 0.25 o 1. TC = 25 C o 2. TJ = 150 C 3. Single Pulse -2 10 0 1 10 2 10 0.00 25 3 10 10 50 ( t) , T h e r m a l R e s p o n s e Figure 9. Maximum Safe Operating Area 100 125 150 Figure 10. Maximum Drain Current vs. Case Temperature D = 0 .5 10 0 N o te s : 1 . Z J C ( t) = 4 .1 7 /W M a x . 2 . D u ty F a c to r , D = t 1 /t 2 3 . T J M - T C = P D M * Z J C ( t) 0 .2 0 .1 0 .0 5 10 PDM 0 .0 2 0 .0 1 -1 t1 s i n g l e p u ls e Z JC 75 TC, Case Temperature [] VDS, Drain-Source Voltage [V] 10 -5 10 -4 10 t2 -3 10 -2 10 -1 10 0 10 1 t 1 , S q u a r e W a v e P u ls e D u r a t io n [ s e c ] Figure 11. Transient Thermal Response Curve (c)2000 Fairchild Semiconductor International Rev. A, April 2000 FQD1N60 / FQU1N60 Gate Charge Test Circuit & Waveform VGS Same Type as DUT 50K Qg 200nF 12V 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Resistive Switching Test Circuit & Waveforms VDS RL VDS 90% VDD VGS RG VGS DUT 10V 10% td(on) tr td(off) t on tf t off Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- L IAS2 -------------------2 BVDSS - VDD L VDS BVDSS IAS ID RG VDD DUT 10V tp (c)2000 Fairchild Semiconductor International ID (t) VDS (t) VDD tp Time Rev. A, April 2000 FQD1N60 / FQU1N60 Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ I SD L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD * dv/dt controlled by RG * ISD controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current I SD ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt VSD VDD Body Diode Forward Voltage Drop (c)2000 Fairchild Semiconductor International Rev. A, April 2000 DPAK MIN0.55 0.91 0.10 9.50 0.30 0.50 0.10 0.76 0.10 0.50 0.10 1.02 0.20 2.30TYP [2.300.20] (1.00) (3.05) (2XR0.25) (0.10) 2.70 0.20 6.10 0.20 9.50 0.30 6.60 0.20 (5.34) (5.04) (1.50) (0.90) 2.30 0.20 (0.70) 2.30TYP [2.300.20] (0.50) 2.30 0.10 0.89 0.10 MAX0.96 (4.34) 2.70 0.20 0.60 0.20 (0.50) 6.10 0.20 5.34 0.30 0.70 0.20 6.60 0.20 0.80 0.20 FQD1N60 / FQU1N60 Package Dimensions 0.76 0.10 (c)2000 Fairchild Semiconductor International Rev. A, April 2000 (Continued) IPAK 2.30 0.20 6.60 0.20 5.34 0.20 0.76 0.10 2.30TYP [2.300.20] (c)2000 Fairchild Semiconductor International 0.50 0.10 16.10 0.30 6.10 0.20 0.70 0.20 (0.50) 9.30 0.30 MAX0.96 (4.34) 1.80 0.20 0.80 0.10 0.60 0.20 (0.50) 2.30TYP [2.300.20] 0.50 0.10 Rev. A, April 2000 FQD1N60 / FQU1N60 Package Dimensions TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrench(R) QFETTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. (c)2000 Fairchild Semiconductor International Rev. A, January 2000