REVISION AE SFML-1XX-XX-XXX-D-XXX OPTIONS (LEAVE BLANK FOR STANDARD AND USE SFML-XX-D) -A: ALIGNMENT PIN (USE SFML-XX-D-A) (SEE FIG 5, SHT 3) -LC: LOCKING CLIP (SEE FIG 7, SHT 3) (USE (2) LC-05-TM & SFML-XX-D) (SEE NOTE 9) -P: PICK & PLACE PAD (SEE FIG 6, SHT 3) (USE PPP-02) (NOT AVAILABLE IN 5 POS) -TR: TAPE & REEL PACKAGING (N/A with -X1 AND -X3 LEAD STYLE, SEE FIG 2, SHT 1) -K: POLYIMIDE FILM PAD (USE K-500-300)(SEE FIG.4, SHT. 2) -SN: SOLDER NAIL (USE SFML-XX-D-SN & WT-27-01-T) (SEE FIG 8, SHT 4) (AVAILABLE ON -X2 LEAD STYLES ONLY) -SN2: SOLDER NAIL FOR .093 BOARD (USE SFML-XX-D-SN & WT-27-02-T) (SEE FIG 8, SHT 4) (ONLY AVAILABLE WITH -02, L2, AND T2 LEAD STYLE. NOT AVAILABLE WITH -A, -LC OPTIONS) ROW SPECIFICATION -D: DOUBLE ROW AE (USE SFML-XX-D-X) PLATING SPECIFICATION -S: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -F: 3" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -H: 30" HEAVY GOLD IN CONTACT AREA, 3" GOLD ON TAIL -L: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -STL: 30" SELECTIVE GOLD IN CONTACT AREA, TIN/LEAD (90/10+/-5%) TAIL (ONLY AVAILABLE ON -02 AND -L2 LEADSTYLES) -SM: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -LM: 10" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL -FM: 3" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL AE FIG 1 DO NOT SCALE FROM THIS PRINT THROUGH HOLE/STRAIGHT MODIFIED (SHOWN: SFML-125-X1-XXX-D) "A" "B" 01 02 "B" .050 1.27 REF .120 3.05 REF No OF POSITIONS .020 0.51 -05, -07, -08, -10 THRU -50 REF (PER ROW) .060 1.52 LEAD STYLE REF DETAIL 'D' -01: THROUGH HOLE (USE C-44-01-XXX, SEE FIG 1, SHT 1) ALTERNATE CONSTRUCTION -02: SURFACE MOUNT (USE C-44-02-XXX, SEE FIG 3, SHT 2) "A" -03: STRAIGHT MODIFIED (USE C-44-03-XXX, SEE FIG 1, SHT 1) 'D' -L1: THROUGH HOLE (LOW INSERTION) (USE C-61-01-XXX, SEE FIG 1, SHT 1) .145 3.68 REF -L2: SURFACE MOUNT (LOW INSERTION) (USE C-61-02-XXX, SEE FIG 3, SHT 2) -L3: STRAIGHT MODIFIED (LOW INSERTION) (USE C-61-03-XXX, SEE FIG 1, SHT 1) -T1: THROUGH HOLE (PHOS BRONZE) (USE C-119-01-XXX, SEE FIG 1, SHT 1) .080 2.03 -T2: SURFACE MOUNT (PHOS BRONZE) REF (USE C-119-02-XXX, SEE FIG 3, SHT 2) .100 2.54 REF (TYP) "C" REF (TYP) (SEE NOTE 5 & TABLE 3) C2 (No OF POS x .050 [1.27] + .155 [3.94] REF SFML-XX-D (No OF POS x .050 [1.27]) + .015 [.38] REF .035 0.89 REF (TYP) .180 4.57 REF C3 "A" (SEE TABLE 1) .110 2.79 REF "B" REF (SEE TABLE 1) .050 1.27 REF .065 1.65 REF .005 0.13 REF 1 MAX SWAY 2 MAX TOE (TYP) (TYP) C4 .050 1.27 (No OF POS x .050 [1.27]) - .050 [1.27] NOTES: SECTION "A"-"A" C8 FIG 2 SECTION "B"-"B" -TR: TAPE & REEL PACKAGING (ALTERNATE KEYING OPTION SHOWN) POS. 1 UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS USER DIRECTION OF UNREELING SEE NOTE 6 c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW ANGLES .XX: .01[.3] .XXX: .005 [.13] .XXXX: .0020 [.051] MATERIAL: 2 1. C REPRESENTS A CRITICAL DIMENSION. 2. COPLANARITY: .004 [.10] FOR POS. 10 THRU 26 .006 [.15] FOR POS. 27 THRU 50 3. MINIMUM PUSHOUT FORCE: .5 LB. 4. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH [MM/MM] AFTER ASSEMBLY. 5. POSITIONS -05 AND -07 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN AND WILL NOT HAVE POLARIZATION NOTCH; POSITIONS -10 THROUGH -24 WILL HAVE ONLY ONE CLIP AT DIMENSION SHOWN; POSITIONS -25 THROUGH -34 WILL HAVE TWO CLIPS AT DIMENSION SHOWN; POSITIONS -35- THROUGH -50 WILL HAVE THREE CLIPS: TWO AT DIMENSION SHOWN & ONE CENTERED ON INSULATOR. 6. SEE NOTCH FOR PROPER ORIENTATION. 7. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH ROWS MUST FACW SAME WAY. 8. MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO ROWS: .003[.08]. 9. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION." 10. TUBE PARTS WITH NOTCH TOWARD ARROW. PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING INSULATOR: VECTRA E130i, LCP UL 94 VO COLOR: BLACK CONTACT: BeCu PHOS BRONZE C1 SHEET SCALE: 2:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY DWG. NO. SFML-1XX-XX-XXX-D-XXX BY: BRATCHER 4/19/99 SHEET 1 OF 4 REVISION AE FIG 4 -K: POLYIMIDE FILM PAD OPTION (SHOWN: SFML-110-X2-X-D-K) (ALTERNATE CONSTRUCTION SHOWN) "M" FIG 3 C5 -X2: SURFACE MOUNT (SAME AS FIG 1, UNLESS OTHERWISE STATED) .190 4.83 "P" (No OF POS x .050 [1.27]) - .050 [1.27] (TOL ACCUM .005 [.13] .1575.0050 4.0000.127 NOTE: "M" = USED MEASURED DIMENSION (REF) "P" = {("M" - .1575 [4.000]) /2} .020 [.51] C-XX-X2-XXX C7 2 MAX SWAY (TYP) "C" C6 +.002 +0.05 .185 - .005 4.70 - 0.13 +4 SEE NOTE 2 "C" -2 .161 4.09 REF SECTION "C"-"C" c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY DWG. NO. SFML-1XX-XX-XXX-D-XXX BY: BRATCHER 4/19/99 SHEET 2 OF 4 REVISION AE FIG 5 PT-1-24-13-09 -A: ALIGNMENT PIN OPTION (SAME AS FIG 1, UNLESS OTHERWISE STATED) (ALTERNATE CONSTRUCTION SHOWN) (No OF POS x .050 [1.27]) + .125 [3.18] REF PACKAGE PARTS IN TUBES AS SHOWN ( SEE NOTE 10) SAMTEC ANTI-STATIC SAMTEC ANTI-STATIC SFML-XX-D-A PT-1-24-14-09 PT-1-24-15-09 .050 1.27 REF .050 1.27 REF (No OF POS x .050 [1.27]) + .075 [1.91] REF FIG 6 -P: PICK & PLACE PAD OPTION (SAME AS FIG 1, UNLESS OTHERWISE STATED) (ALTERNATE CONSTRUCTION SHOWN) PPP-02 .394 10.01 REF .225 5.72 REF "A" .010 [.25] (SEE TABLE 2) .062 1.57 FIG 7 -LC: LOCKING CLIP OPTION (SAME AS FIG 1, UNLESS OTHERWISE STATED) (ALTERNATE CONSTRUCTION SHOWN) SFML-XX-D LOCKING TAB .065 1.65 .056 1.42 REF .010 0.25 REF LC-05-TM (No OF POS x .050 [1.27]) + .075 [1.91] c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:1 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY DWG. NO. SFML-1XX-XX-XXX-D-XXX BY: BRATCHER 4/19/99 SHEET 3 OF 4 REVISION AE FIG 8 -SNX: SOLDER NAIL OPTION (SHOWN: SFML-125-02-XXX-D-SN (SAME AS FIG 1, UNLESS OTHERWISE STATED) (ONLY AVAILABLE ON -X2 LEAD STYLES) (No OF POS x .050[1.27]) + .185[4.70] REF SFML-XX-D-SN "D" CL CL C9 FLUSH TO .005[0.13] ABOVE "B" REF WT-27-XX-T .026 0.66 REF (2 PLCS) "D" 2 MAX SWAY (TYP) SECTION "D"-"D" C10 (No OF POS x .050[1.27]) + .085[2.16] OPTION -SN SN2 TABLE 3 "B" .066[1.68] .101[1.80] PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 4:1 c:\enterprisevault\DWG\MISC\MKTG\SFML-1XX-XX-XXX-D-XXX-MKT.SLDDRW 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail: info@SAMTEC.com code: 55322 DESCRIPTION: .050 [1.27] x .050 [1.27] LOCKING SOCKET ASSEMBLY DWG. NO. SFML-1XX-XX-XXX-D-XXX BY: BRATCHER 4/19/99 SHEET 4 OF 4