Pulse A TECHNITROL COMPANY www.pulseeng.com NOTES: UNLESS OTHERWISE SPECIFIED 1. 121110 9 87 NOTICE: | THIS IS A RoHS COMPLIANT 000 900 COMPONENT/PRODUCT. 000000 RoHS |ALL ENGINEERING CHANGES 65432 1 MUST HAVE PRIOR APPROVAL "2 rT BY THE DESIGN CENTER. om or b OC o @ Pulsevack 2. PLASTIC HOUSING: THERMOPLASTIC MATERIAL WITH FLAMMABILITY ATH 0024NL 150 RATING UL 94V-O OR BETTER. O18 160 3. CONTACT BASE MATERIAL: PHOSPHOR BRONZE. Ou 170 4. CONTACTS UNDERPLATE: 50 MICROINCHES DUCTILE NICKEL. / \ 5. CONTACTS PLATING: 50 MICRO-INCH GOLD PLATING. 6. SOLDER TAIL PLATING MATERIAL: 200-500 ulINCHES 100% TIN, = _ PIN. ASSIGNMENTS MATTE FINISH. (COMPONENT SIDE VIEW) 7. METAL SHIELD: NICKEL PLATING ON COPPER ALLOY. 8. JACK CAVITY CONFORMS TO FCC RULES AND GREEN GREEN/ REGULATIONS PART 68 SUBPART F. LED YELLOW LED 9. PCB PLATING: EG. 10. | SOLDERABILITY: CONFORMS TO ANSI/JSTD002, IPC/EIA J-STDOO3A. 11. | OPERATING TEMPERATURE: OC TO +70C 12. STORAGE TEMPERATURE: 20C TO +125C 13. | JEDEC MOISTURE: LEVEL 1. 14. REVISION: MX1,MX2, ...... ARE PRELIMINARY. PACKAGE OUTLINE @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/02/10) PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. & PROPRIETARY CONN,RJ45,1X1,10G6,G2 PS2484.009-B 1 JTHOO024NL M10Pulse A TECHNITROL COMPANY www.pulseeng.com TRD1+ 8 1 TRP1+ TRCT1 12 . ELECTRICAL CHARACTERISTICS AT +25C UNLESS OTHERWISE SPECIFIED - 2 TRPI- TRDI- 9 PARAMETER SPECIFICATIONS TRD2+ 3 O 3 TRP2+ 100 KHz 1400 MHz TROT? 6 INSERTION LOSS |_3 9 dB MAX| -2.0 dB MAX (1.4 dB TYP) oe 1P2 wy RETURN LOSS 140 MHz 40 MHz500 MHz a TRO2 a (Z OUT = 100 OHM + 1%) | 18 dB MIN. | 17 + 10*LOG (f/40) Li m TRD3+ 4 4 TRP3+ a INDUCTANCE (OCL) 120 uH MIN @ 100 kHz, 100 mv oO Oo 1100 MH 100-500 MH TRCTS 1 CROSSTALK, ADJACENT z CHANNELS -28 dB MIN -19 dB MIN TRDS 5 5 TRPS- 1100 MHz | 100300 MHz |300500 MHz TRD4+ 11 7 TRP4+ COMMON MODE REJECTION RATIO |-35 dB MIN| 30 dB MIN | 25 dB MIN TRCT4 7 COMMON TO 1-250 MHz 250-500 MHz DIFFERENTIAL MODE TRD4 10 8 TRP4 REJECTION (CDMR) 50 dB MIN 22 dB MIN T .001uF, 2KV INPUT OUTPUT | ISOLATION 2250 VDC MIN @ 60 SECONDS SWZ GREEN a (SHIELD) NOTE: f IS FREQUENCY IN MHz. GREEN+ 14 EMITTED COLOR GREEN YELLOW GREEN VA WAVE. LENGTH (nM) 570 588 570 YELLOW- 15 POWER DISSIPATION (Pd) 85 mW MAX [100 mW MAX| 85 mW MAX coms 16 DC FORWARD CURRENT 25 mA MAX | 30 mA MAX | 25 mA MAX FORWARD VOLTAGE (VF) @ 20mA| 2.2 V TYP 2.1 V TYP | 2.2 V TYP GREEN 17 VA NOTE: PER VENDOR'S SPECIFICATION BICOLOR SCHEMATIC @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/02/10) PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. & PROPRIETARY CONN,RJ45,1X1,106,G2 PS2484.009-B 2 JTHO024NL M10Pulse A TECHNITROL COMPANY www.pulseeng.com [4 P| ALL DIMENSION ARE SHOWN IN. METRIC. DIMENSIONS SHOWN IN BRACKETS ARE 23.88 [.940] INCHES. UNLESS OTHERWISE SPECIFIED, are THE FOLLOWING TOLERANCES APPLY: X.XX [XXX] = 0.25 [+.010] cI tc 0.51 [.020] J +0.25 17.53 [.690] +.010 4X 1.277579 [.o50*-848 +0.25 +.010 2X 1.277578 [.050 004 oo 3.18 [.125] SS) (SIGNAL/LED PINS) 3.30 [.130] SHIELD Aas) | - he 1 (Post) Th 4 J 13,21 20) I @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/02/10) LED 11.30 [.445] LED 7 PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING & PROPRIETARY CONN,RJ45,1X1,106,G2 PS2484.009-B 3 SHEET: | DWG. NO./ PART NO. REV. JTHO024NL M10Pulse A TECHNITROL COMPANY www.pulseeng.com | ~~ 2.03 [.080] ALL DIMENSION ARE SHOWN IN METRIC. ~| = (1.02 [.040]) DIMENSIONS SHOWN IN BRACKETS ARE | INCHES. UNLESS OTHERWISE SPECIFIED, PANEL THE FOLLOWING TOLERANCES APPLY: FRONT OF CONNECTOR a X.XX [.XXX] = +0.25 [+.010] 17.58 [.692] + $< oN 15.04 [.592] oO = i 9.65 | __} [.380] | | 2.54 [.100] | re a $ PCB 2.54 [.100] fl ei H f- | 8.89 [.350] 2X 41.57 [.062] | ___ , + Ch) 6 1 me , 9.14 [.360] 2.54 [.100] | & & O|o ot P $ e le ourF 12.07 +0.13 / [.475 +.005] 12X 90.89 [.035] 10X 1.02 [.040] 0.36 +0.13 9X 2.03 [.080] { [.014 +.005] \f 5X $1.27 [.050] +0.05 oN 2x 93.20 +8-B8 +.002 [ 2x 9.126 +-B84 | ao - +0.15 +.005] Lae ~Oo wn oO "1 SUGGESTED FOOTPRINT (COMPONENT SIDE SHOWN) DIMENSIONAL TOLERANCE: (UNLESS OTHERWISE SPECIFIED) XX [XXX] = +0.05 [.002 SUGGESTED PANEL CUTOUT PCB @ Copyright, 2010. Pulse Engineering, Inc. All rights reserved. Drawing specifications subject to change without notice. (11/02/10) PULSE CONFIDENTIAL PRODUCT DESCRIPTION PS DRAWING SHEET: | DWG. NO./ PART NO. REV. & PROPRIETARY CONN,RUJ45,1X1,106,G2 PS2484.009-B 4 JTHO024NL M10