1 Operation at or near full rated power (especially >1W) involves consideration of mounting geometry (solder pad and trace area/thickness, etc.). Request FA2623 for suggested mounting pad layouts.
2 Extended resistance range available. Most sizes available down to 0.01Ω 1%. 3 Up to 25A available. 4 Dim. t on MC2512B is .094[2.4] maximum.
TYPICAL PERFORMANCE
THICK FILM CHIP RESISTORS AND JUMPERS
MC SERIES 50mW (0201) to 3W (2040)
ZC SERIES Zero-ohm chip (1A - 25A)
Industry’s widest selection & lowest prices-
0.1Ω to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm
0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5%
(other sizes available from stock in many popular values)
Option V: +175° operating temperature
Option U: User-trimmable chips
Option P: Increased pulse capability
Military screening, custom values & TC, microwave design, etc.
RCD’s Series MC resistors utilize precision thick film technology
offering inherently low inductance, exceptional reliability and superior
performance. Heavy plating with NO LEACHTM nickel barrier assures
superb solderability and long shelf life. Stat e-of-the-art production line
enables the industry’s most precise accuracies (0.25% & 50ppm!)
thereby replacing more costly thin-film chips in many applications.
RCD offers low cost offshore assembly of SM and leaded PCB’s
(refer to RCD’s Assembly Services p.114 for more information).
L
tW
T
Pulse capability is dependent on res. value, waveform, repetition, etc.
Chart is a general guide for Opt. P version, single or infrequent pulses,
with peak voltage levels not exceeding 150V for 0402 & 0603 size, 300V
for 0805, 400V for 1206 & 1210, 450V for 2010 & 2512. Max pulse
wattage for standard parts (w/o Opt.P) is 50% less, max pulse voltage
is 50V less. Increased pulse levels available. For improved performance
and reliability, pulse derating factor is recommended (30-50% typ., refer
to #R-42). Verify selection by evaluating under worst-case conditions.
CRTDepy
CZ,CM egattaW gnitaR
1
CTdtS
2
,C°/mpp .pyt
egnaR.siseR loT%5.0±
2
dradnatS egnaR.siseR loT%1±
2
dradnatS egnaR.siseR loT%5±
2
CM egatloV gnitaR
2
CZEPYT repmuJ
3
snoisnemiD ]mm[hcnI
LWTt
1020W50. 00101ΩK22ot ΩV52 .xaMpmA1 m05 Ω.xaM 200.±420. ]30.±6.0[ 200.±210. ]30.±3.[ 200.±010. ]30.±52.[ 200.±600. ]50.±51.[
002M1otK1.22 Ω01 ΩM1ot Ω
0041.9-1 ΩM2.2-M1.1,
2040 metikcotS W360. 001 01 ΩM1ot ΩV05 .xaMpmA1 m05 Ω.xaM 400.±040. 1.±00.1[] 400.±020. ]1.±5.[ 400.±410. ]1.±53.[ 400.±010. ]1.±52.[
00201ΩM1ot Ω
0041Ω67.9ot Ω1.9-1 ΩM7.4-M1.1,
3060 metikcotS W1. 001 01 ΩM1ot01ΩM1ot ΩV05 pmA5.1 .xaM
m05 Ω.xaM
500.±160. ]21.±55.1[ 400.±130. ]1.±8.[ 600.±610. ]51.±04.[ 600.±010. ]51.±52.[
00201ΩM1ot Ω
0041Ω67.9ot Ω1.9-1 ΩM01-M1.1,
5080 metikcotS W521. 001 01 ΩM1ot01ΩM1ot Ω15 V0.xaMpmA2 m05 Ω.xaM 500.±970. ]51.±0.2[ 600.±050. ]51.±52.1[ 600.±020. ]51.±05.[ 800.±610. ]2.±4.[
00201ΩM1ot Ω
00467.9-1.0 ΩM01-M20.1,1.9-1.0 ΩM02-M1.1,
6021 metikcotS W52. 001 01 ΩM1ot01ΩM1ot ΩV002 .xaMpmA2 m05 Ω.xaM 800.±621. ]2.±2.3[ 600.±160. ]51.±55.1[ 600.±420. ]51.±16.[ 800.±020. ]2.±15.[
002M6.5otM20.101ΩM6.5ot Ω
00467.9-1.0 ,Ω M01-M26.51.9-1.0 ΩM22-M2.6,
0121W33. 001 01 ΩM1ot01ΩM1ot ΩV002 .xaMpmA3 m05 Ω.xaM 800.±621. ]2.±2.3[ 800.±890. ]2.±5.2[ 800.±420. ]2.±6.[ 010.±020. ]52.±5.[
002M6.5otM20.101ΩM6.5ot Ω
00467.9-1.0 ,Ω M01-M26.51.9-1.0 ΩM22-M2.6,
0102W57. 001 01 ΩM1ot01ΩM1ot ΩV002
(V052 )P.tpO
.xaMpmA3 m05 Ω.xaM 800.±791. ]2.±0.5[ 800.±201. ]2.±6.2[ 800.±420. ]2.±6.[ 010.±020. ]52.±05.[
002M6.5otM20.101ΩM6.5ot Ω
00467.9-1.0 ,Ω M01-M26.51.9-1.0 ΩM22-M2.6,
2152 B2152 W0.1 W0.2
001 01 ΩM1ot01ΩM1ot ΩV052 53(V0)P.tpO
.xaMpmA4 m05 Ω.xaM 10.±052. ]52.±53.6[ 010.±521. ]52.±2.3[ 800.±420. ]2.±6.[ 210.±620. .[6 3.±5]
4
002M6.5otM20.101ΩM6.5ot Ω
00467.9-1.0 ,Ω M01-M26.51.9-1.0 ΩM22-M2.6,
0402*0.3/0.2 001 01 ΩM1ot ΩV053A/N 800.±102. ]2.±1.5[ 800.±204. ]2.±2.01[ 800.±420. ]2.±6.[ 550.810.± ]64.±4.1[
00201ΩM1ot Ω
0041.9-1 Ω
)C°521+ot°55-(kcohSlamrehT%2.0 ∆R
)Vdetarx2ETN,S5,Wx5.2(daolrevO%1∆R
)C°55-(noitarepO.pmeTwoL%2.0 ∆R
)srh001,C°521(erusopxE.pmeThgiH%5.0 ∆R
taeHredloSotecnatsiseR%2.0 ∆R
ecnatsiseRerutsioM%5.0 ∆R
).srh0001(efiLdaoL%0.1 ∆R
.pmeTgnitarepO)V.tpOC°571+(C°551+ot55-
)C°07evoba(gnitareDC°/%81.1ybV&WetareD
PULSE WITHSTAND CHART (increased pulse levels avail.)
1uS 10uS 100uS 1mS 10mS 100mS
Pulse Duration
MC2512P
MC2010P
MC1210P
MC1206P
MC0805P
MC0603P
MC0402P
Peak Power (Watts)
500
100
10
1
FA033E Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
P/N DESIGNATION:
Optional TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std)
RCD Type: MC or ZC
Chip Size: 0201 to 2040
Resis. Code 0.25% to 1% Tol: 3 signif. digits & multiplier
(R100= .1Ω, 1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1KΩ)
5% Tol: 2 signif. digits & multiplier (R10=.1Ω, 1R0=1Ω, 100=10Ω,
101=100Ω, 102=1KΩ). Leave blank on ZC zero-ohm chips.
Tolerance:J=5%, F=1%, D=0.5%, C=0.25% Leave blank on ZC
zero-ohm chips. Opt.U trimmable chips W=±15%, M=±20%, U=0 to -30%.
Packaging: B=Bulk, T=Tape & Reel
MC 1206 - 2210 - F T W
Options: U, P, etc. (leave blank if std)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable)
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
RESISTORSCAP
ACITORS
C
OILSDELAY
LINES
16
