PL IA NT CO M Features Applications Radial Leaded Devices Customer Premise Equipment (CPE): Modems Cable modems Fax machines POS equipment Security equipment Set top boxes *R oH S Maximum 600 VAC interrupt fault rating Available in matched resistance "bins" Ability to withstand lightning surges RoHS compliant* Agency recognition: MF-R/600 Series - Telecom PTC Resettable Fuses Electrical Characteristics Model MF-R015/600 MF-R015/600-A MF-R015/600-B MF-R015/600-F MF-R016/600 MF-R016/600-A MF-R016/600-1 Max. Operating Voltage Max. Interrupt Ratings Volts Amps Max. 600 600 600 600 600 600 600 Max. 3 3 3 3 3 3 3 60 60 60 60 60 60 60 Hold Current Trip Current Amps at 23 C Amps at 23 C 0.15 0.15 0.15 0.15 0.16 0.16 0.16 0.30 0.30 0.30 0.30 0.32 0.32 0.32 Initial Resistance Ohms at 23 C Min. 6.0 7.0 9.0 7.0 4.0 4.0 4.0 Ohms at 23 C Max. 12.0 10.0 12.0 12.0 10.0 7.0 8.0 One Hour Max. Tripped Post-Trip Time To Power Resistance Trip @ 1 A Dissipation Ohms Seconds Watts at 23 C at 23 C at 23 C Max. 22.0 5.0 1.0 20.0 5.0 1.0 22.0 5.0 1.0 22.0 5.0 1.0 18.0 7.0 1.0 16.0 7.0 1.0 17.0 7.0 1.0 Environmental Characteristics Operating/Storage Temperature ........................... -40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................. 125 C Passive Aging ....................................................... +85 C, 1000 hours............................................... 5 % typical resistance change .............................................................................. +60 C, 1000 hours............................................... 5 % typical resistance change Humidity Aging ..................................................... +85 C, 85 % R.H. 500 hours ............................... 5 % typical resistance change Thermal Shock ..................................................... MIL-STD-202F, Method 107G, ............................. 10 % typical resistance change .............................................................................. +125 C to -55 C,10 times .................................. 15 % typical resistance change Solvent Resistance ............................................... MIL-STD-202, Method 215B ................................ No change Lead Solderability ................................................. ANSI/J-STD-002 Flammability ......................................................... IEC 695-2-2 .......................................................... No Flame for 60 secs. Vibration ............................................................... MIL-STD-883C, Method 2007.1, Condition A ...... No change Test Procedures And Requirements For Model MF-R/600 Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................... Verify dimensions and materials ........................... Per MF physical description Resistance ............................................................ In still air @ 23 C .................................................. Rmin R Rmax Time to Trip........................................................... 5 times Ihold, Vmax, 23 C ................................... T max. time to trip (seconds) Hold Current ......................................................... 30 min. at Ihold ..................................................... No trip Trip Cycle Life ....................................................... Vmax, Imax, 100 cycles ........................................ No arcing or burning Trip Endurance ..................................................... Vmax, 48 hours ..................................................... No arcing or burning UL File Number .................................................... E 174545S Thermal Derating Chart - Ihold (Amps) Model Ambient Operating Temperature -40 C -20 C 0 C 23 C 40 C 50 C 60 C 70 C 85 C MF-R015/600 0.233 0.206 0.178 0.150 0.124 0.110 0.096 0.083 0.062 MF-R016/600 0.249 0.219 0.190 0.160 0.132 0.117 0.103 0.088 0.066 Itrip is approximately two times Ihold. *RoHS Directive 2002/95/EC Jan 27, 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Additional Features Ability to withstand AC power cross conditions MF-R/600 Series - Telecom PTC Resettable Fuses Product Dimensions A Max. 13.5 (0.531) 16.0 (0.629) Model MF-R015/600 MF-R016/600 B Max. 12.6 (0.496) 12.6 (0.496) Packaging options: BULK: 500 pcs. per bag. Longer lead lengths available upon request. A C Max. 6.0 (0.236) 6.0 (0.236) D Min. 4.7 (0.185) 4.7 (0.185) Physical Characteristics Style Lead Dia. Material 0.65 1 Sn/Cu (0.026) 0.65 1 Sn/Cu (0.026) E Nom. 5.0 (0.197) 5.0 (0.197) TAPE & REEL: 600 pcs. per reel. DIMENSIONS: How to Order Typical Part Marking C MM (INCHES) MF - R 015/600 - A 05 - 2 Represents total content. Layout may vary. (R) MANUFACTURER'S TRADEMARK PART IDENTIFICATION B R015 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; SECOND DIGIT = MONTH; NEXT THREE DIGITS = LOT CODE) E D 24001K MFG. LOCATION (K = KOREA S = CHINA) Typical Time to Trip at 23 C Time to Trip (Seconds) 1000 MF-R016/600 100 MF-R015/600 Multifuse Product Designator Series R = Radial Leaded Component Hold Current, Ihold 015-016 (0.15 - 0.16 Amps) Max. Interrupt Voltage, V Resistance Range * Narrow resistance ranges are available on all models as defined in Electrical Characteristics. * Blank = N/A Resistance Bins * Narrow resistance ranges can be separated into packages where each device is within 0.5 ohms of each other. * Blank = N/A Packaging Options - 0 = Bulk Packaging - 2 = Tape and Reel* *Packaged per EIA486-B 10 1 0.10 0.00 0.50 1.00 1.50 2.00 2.50 3.00 Fault Current (Amps) Resistance Options Model MF-R015/600 MF-R015/600-A MF-R015/600-B MF-R015/600-F MF-R016/600 MF-R016/600-A MF-R016/600-1 Rmin. 6.0 7.0 9.0 7.0 4.0 4.0 4.0 Rmax. 12.0 10.0 12.0 12.0 10.0 7.0 8.0 R1Max. 22.0 20.0 22.0 22.0 18.0 16.0 17.0 Bin N/A 0.5 0.5 0.5 N/A 0.5 0.5 MF-R/600, REV. H, 05/11 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. IEC Mark EIA Mark Carrier tape width W W Hold down tape width W0 W4 Dimension Description Hold down tape Top distance between tape edges Dimensions Dimensions Tolerance 18 -0.5/+1.0 (.709) (-0.02/+.039) 11 min. (.433) No protrusion W2 W6 Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 Overall width w/o lead protrusion (kinked lead) C2 3 (.118) 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold-down tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance 20 consecutive max. -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) max. max. max. max. max. max. max. max. 0.3 (.012) 1 (.039) Device pitch: MF-R005-MF-R160, MF-R/90, MF-RX110/72-MF-RX185/72 12.7 (0.5) 0.3 (.012) Device pitch: MF-R185-MF-R400, MF-RX110-MF-RX375 MF-R/600, MF-RX250/72-MF-RX375/72 25.4 (1.0) 0.6 (.024) 0.9 (.035) max. Tape thickness t t Tape thickness with splice: MF-R010-MF-R160, MF-RX110/72-MF-RX185/72 t1 1.5 (.059) max. Tape thickness with splice: MF-R250-MF-R1100, MF-RX110-MF-RX375, MF-R/90, MF-RX250/72-MF-RX375/72 t1 2.3 (.091) max. Splice sprocket hole alignment 0 Body lateral deviation h h 0 Body tape plane deviation p p 0 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 0.3 (.012) 1.0 (.039) 1.3 (.051) DIMENSIONS: MM (INCHES) MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 & MF-RX/250 Series Tape and Reel Specifications IEC Mark EIA Mark Lead spacing: MF-R, MF-R/90, MF-R/600, MF-RX, MF-RX/72 F F Lead spacing: MF-RX/250 F F Reel width w W2 Reel diameter d a W1 h Arbor hole diameter f c Core diameter: MF-R, MF-RX, MF-R/90 h n Core diameter: MF-RX/250, MF-R/600 h n Dimension Description Space between flanges less device Dimensions Dimensions Tolerance 5.08 0.2 (0.2) (0.008) 5.08 -0.5/+0.6 (0.2) (-.020/+.024) 56.0 max. (2.205) 370.0 max. (14.57) 4.75 3.25 (.187) (.128) 26.0 12.0 (1.024) (.472) 80 max. (3.15) 91 max. (3.58) 56 372 372 max. (2.2) (14.6) (14.6) 67 372 362 max. (2.64) (14.6) (14.25) 64 372 362 max. (2.52) (14.6) (14.25) Box: MF-R, MF-RX, MF-R/90 Box: MF-RX/250 Box: MF-R/600 Consecutive missing places: MF-R, MF-RX, MF-R/90 3 Consecutive missing places: MF-RX/250, MF-R/600 none Empty places per reel: MF-R, MF-RX, MF-R/90 Not specified Empty places per reel: MF-RX/250, MF-R/600 0.1 % max. Taped Component Dimensions - Figure 1 h p h p Reference plane P1 H1 A L I2 H1 F H H0 B W0 I1 P0 W1 W D0 User direction of feed DIMENSIONS: Cross section A - B Reel Dimensions - Figure 2 MM (INCHES) t Reel h d User direction of feed Upper side Tape Lower side f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.