NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBRB1530CT - MBRB1545CT 15A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features and Benefits Mechanical Data Guard Ring Die Construction for Transient Protection Low Power Loss, High Efficiency High Surge Capability High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 150A Peak For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications Case: TO263 (D2PAK) Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish Tin. Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 1.7 grams (Approximate) PIN 1 PIN 2 & 4 PIN 3 Top View Polarity Ordering Information (Note 1) Part Number MBRB1530CT-T MBRB1535CT-T MBRB1540CT-T MBRB1545CT-T Note: Packaging TO263 (D2PAK) TO263 (D2PAK) TO263 (D2PAK) TO263 (D2PAK) Shipping 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch 800/Tape & Reel, 13-inch 1. For packaging details, go to our website at https://www.diodes.com/design/support/packaging/diodes-packaging/. Marking Information YWW MBRB15XXCT MBRB1530CT - MBRB1545CT Document number: DS13015 Rev. 8 - 3 MBRB15XXCT = Product Type Marking Code Where XX = 30, 35, 40 or 45, Depending on Device Type = Manufacturers' Code Marking YWW = Date Code Marking Y = Last Digit of Year (ex: 2 for 2002) WW = Week Code (01 to 53) 1 of 5 www.diodes.com April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBRB1530CT - MBRB1545CT Maximum Ratings (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol MBRB 1530CT MBRB 1535CT MBRB 1540CT MBRB 1545CT Unit 30 35 40 45 V 21 24.5 28 31.5 15 V A 150 A VRRM VRWM VR VR(RMS) IO Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TC = +105C Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM Thermal Characteristics Characteristic Typical Thermal Resistance Junction to Terminal Symbol RJT VR 80% VRRM VR 50% VRRM DC Forward Mode Operating Temperature Range (Note 2) Storage Temperature Range Electrical Characteristics Unit C/W -65 to +150 +180 +200 -65 to +175 TJ TSTG C C (@TA = +25C, unless otherwise specified.) Characteristic Forward Voltage, Per Element Voltage Rate of Change Peak Reverse Current at Rated DC Blocking Voltage (Note 3) Maximum Reverse Recovery Time (Note 4) Typical Total Capacitance (Note 5) Notes: Value 3.0 Symbol VFM dv/dt @ IF = 7.5A @ TA = +25C @ TA = +100C IRM tRR CT Value 0.7 10,000 0.1 15 30 250 Unit V V/s mA ns pF 2. The heat generated must be less than the thermal conductivity from Junction-to-Ambient: dPD/dTJ < 1/RJA. 3. 300s pulse width, 2% duty cycle. 4. Reverse recovery test conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A (see figure 1). 5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 20 16 12 8 4 0 0 50 100 150 TC, CASE TEMPERATURE ( ( C)) Fig. 1 Forward Current Derating Curve MBRB1530CT - MBRB1545CT Document number: DS13015 Rev. 8 - 3 200 2 of 5 www.diodes.com 100 10 1.0 Tj = 25C 0.1 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per Element April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBRB1530CT - MBRB1545CT 1,000 250 200 150 100 50 100 10 0 1 IR, INSTANTANEOUS REVERSE CURRENT (mA) = 25 TJ T =j 25 C = 1MHz f = f1MHz 8.3 ms single half-sine-wave CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 300 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 0.1 1.0 10 VR, DC REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 100 100 10 1.0 0.1 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics, per element MBRB1530CT - MBRB1545CT Document number: DS13015 Rev. 8 - 3 3 of 5 www.diodes.com April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBRB1530CT - MBRB1545CT Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. TO263AB (D2PAK) A E c2 L1 7 1 D H L2 e b c See Detail B b2 L3 E1 Gauge Plane D1 Seating Plane a L A1 TO263AB (D2PAK) Dim Min Max Typ A 4.07 4.82 A1 0.00 0.25 b 0.51 0.99 b2 1.15 1.77 c 0.356 0.73 c2 1.143 1.65 D 8.39 9.65 D1 6.55 6.95 e 2.54 TYP E 9.66 10.66 E1 6.23 8.23 H 14.61 15.87 L 1.78 2.79 L1 1.67 L2 1.77 L3 0.254 a 0 8 All Dimensions in mm Detail B Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. TO263AB (D2PAK) X1 Dimensions C X X1 Y Y1 Y2 Y1 Y2 Value (in mm) 5.08 1.10 10.41 3.50 7.01 15.99 X Y C MBRB1530CT - MBRB1545CT Document number: DS13015 Rev. 8 - 3 4 of 5 www.diodes.com April 2018 (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART MBRB1530CT - MBRB1545CT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2018, Diodes Incorporated www.diodes.com MBRB1530CT - MBRB1545CT Document number: DS13015 Rev. 8 - 3 5 of 5 www.diodes.com April 2018 (c) Diodes Incorporated