SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES TE connectivity
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE* DEVICE
WITH PRE-INSTALLED LEAD
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.:
D-101-3X
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D981004
REPLACES:
D1013X
DRAWN BY:
M. FORONDA DATE: 06/15/98 PROD. REV.
SEE TABLE DOC ISSUE:
5 SCALE:
None SIZE:
A SHEET:
1 of 1
Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: red.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color:gray.
4. GROUND LEAD: Raychem 55A0111-XY in accordance with MIL-W-22759/32 AWG ‘XY’ (see table) stranded
tin plated copper. Color: see table.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting the
dimensional criteria listed, having tin or silverplated copper shields.
2. Temperature range: -55°C to +150°C.
Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70.
For best results, prepare the cable as shown:
* A trademark of TE Connectivity.
‘XY’ = WIRE GAUGE (AWG)
Product Revision Product Dimensions Cable Dimensions
Product Name L
max øA
min øB
min K
min AWG øD
max øE
min J±0.5
(J±0.02) Color of
Item 4
D-101-33 J 22 black
D-101-34 K 17.0 4.30 5.00 150 22 4.30 1.78 7.00 white
D-101-35 J (0.670) (0.170) (0.200) (5.900) 20 (0.170) (0.070) (0.275) black
D-101-36 J 20 white
