12 11 10 9 7 8 5 6 4 3 2 1 H H SEE NOTE 9 1.2 TAIL LENGTH 13.28 3.80 1.00 MIN BOARD THICKNESS SEE NOTE 10 12.68 G G 10.80 12.75 SEE NOTE 11 PIN A1 F F 11.36 B 0.84 1.06 SIGNAL HOLES REF A E 1.90 GROUND HOLE REF BACKPLANE (REF) BP ROW A 2.08 12.75 14.96 ROW J ROW H ROW G ROW F ROW E ROW D ROW C ROW B ROW A 1.35 8X 10.80 D PIN A1 1.70 MAX 14.00 (FULLY MATED) B A DOCUMENT STATUS 12 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 P1 RELEASE DATE 11 2018/09/26 10 (SEE CHART) (9 HOLES PER COLUMN) SEE NOTE 3. C BP PIN A1 DAUGHTERCARD HOLE PATTERN (CONNECTOR SIDE) SYMBOLS = 0 = 0 = 0 7 6 SCALE mm 4:1 = 0 4 PLACES = 0 3 PLACES = 0 2 PLACES = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 B THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS ANGULAR TOL = 0 C 8 PTH BACKPLANE (REF) 21:30:55 9 D 0.10 0.35 OFFSET BETWEEN DC AND BP HOLE COLUMNS C NOTES: 1. MATERIALS: HOUSING - LIQUID CRYSTAL POLYMER (LCP), GLASS-FILLED, UL94V-0 TERMINALS - HIGH PERFORMANCE COPPER ALLOY 2. FINISH: 30IN SELECTIVE GOLD IN CONTACT AREA, SELECTIVE TIN ON PCB TAILS, NICKEL OVERALL. 3. REFER TO MOLEX PRODUCT SPEC PS-76060-999 FOR PERFORMANCE SPECIFICATIONS AND ADDITIONAL PCB INFORMATION. 4. EACH SIGNAL WAFER CONTAINS 2 COLUMNS OF TERMINALS. 5. PRODUCT IS PACKAGED PER PK-70873-591. 6. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPEC PS-45499-002. 7. REFER TO MOLEX SALES DRAWING SD-76165-001 FOR THE MATING HEADERS AND SD-76410-001 FOR THE MATING RAM CONNECTORS. 8. REFER TO MOLEX PCB ROUTING GUIDE AS-76060-990 FOR ANTIPAD AND ROUTING RECOMMENDATIONS. 9. PART NUMBER 76170-1020 SHOWN ON DRAWING. KEYING FEATURES WILL CHANGE WITH COLUMN SIZE. 10.MINIMUM BOARD THICKNEDD IS 1.00 mm FOR COMPLIANT PIN FUNCTIONALITY. 11. MARKING: LOCATED APPROXIMATELY AS SHOWN. PART NUMBER AND DATE CODE. E KEEP-OUT ZONE 1 PLACE 0 PLACES 0.5 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 605016 DRWN: SCHANNARAYAN CHK'D: TELO APPR: TELO INITIAL REVISION: DRWN: JLAURX APPR: JLAURX THIRD ANGLE PROJECTION 4 2018/02/10 2018/09/26 2018/09/26 IMPACT 100 OHM DC 3 PAIR SIGNAL MODULE UNGUIDED SALES DRAWING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/01/30 2008/02/05 DRAWING SERIES C-SIZE 76170 3 SD-76170-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 E3 SHEET NUMBER GENERAL MARKET 1 OF 2 1 A 12 H G 11 10 9 7 8 MATERIAL NUMBER # OF COLUMNS # OF DIFF PAIR DIM "A" MAX DIM "B" 76170-*006 6 18 11.40 9.50 76170-*008 8 24 15.20 13.30 76170-*010 10 30 19.00 17.10 76170-*016 16 48 30.40 28.50 76170-*036 6 18 11.40 9.50 76170-*038 8 24 15.20 13.30 76170-*020 10 30 19.00 17.10 76170-*026 16 48 30.40 28.50 5 6 4 3 2 1 PTH H 76170-*0** 0.460.05 # OF COLUMNS 06 = 6 COL 0.46 PTH 08 = 8 COL 0.46 PTH 10 = 10 COL 0.46 PTH 16 = 16 COL 0.46 PTH 20 = 10 COL 0.39 PTH 26 = 16 COL 0.39 PTH 36 = 6 COL 0.39 PTH 38 = 8 COL 0.39 PTH 1 = OPEN LEAD-FREE 0.390.05 G F F E E D D C C B B SYMBOLS = 0 = 0 = 0 A P1 RELEASE DATE 11 2018/09/26 10 21:30:55 C 9 8 7 6 mm 1:1 = 0 4 PLACES = 0 3 PLACES = 0 2 PLACES = 0 CURRENT REV DESC: MIGRATED TO NX GENERAL TOLERANCES (UNLESS SPECIFIED) = 0 DOCUMENT STATUS 12 SCALE ANGULAR TOL = 0 FORMAT: master-tb-prod-C REVISION: H DATE: 2018/01/18 THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS 1 PLACE 0 PLACES 0.5 0.13 0.25 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 5 EC NO: 605016 DRWN: SCHANNARAYAN CHK'D: TELO APPR: TELO INITIAL REVISION: DRWN: JLAURX APPR: JLAURX THIRD ANGLE PROJECTION 4 2018/02/10 2018/09/26 2018/09/26 IMPACT 100 OHM DC 3 PAIR SIGNAL MODULE UNGUIDED SALES DRAWING PRODUCT CUSTOMER DRAWING DOC TYPE DOC PART REVISION DOCUMENT NUMBER 2008/01/30 2008/02/05 DRAWING SERIES C-SIZE 76170 3 SD-76170-001 MATERIAL NUMBER PSD 001 CUSTOMER SEE CHART 2 E3 SHEET NUMBER GENERAL MARKET 2 OF 2 1 A