2P-KVR16LS11/4BK - 2-Power - Product.Network

CYIV-51001-1.8

are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as

trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its

semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any products and

services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use of any information, product, or service

described herein except as expressly agreed to in writing by Altera. Altera customers are advised to obtain the latest version of device specifications before relying

on any published information and before placing orders for products or services.

Cyclone IV Device Handbook,

Volume 1

May 2013

Feedback Subscribe

ISO

9001:2008

Registered

1. Cyclone IV FPGA Device Family

Overview

Altera’s new Cyclone®IV FPGA device family extends the Cyclone FPGA series

leadership in providing the market’s lowest-cost, lowest-power FPGAs, now with a

transceiver variant. Cyclone IV devices are targeted to high-volume, cost-sensitive

applications, enabling system designers to meet increasing bandwidth requirements

while lowering costs.

Built on an optimized low-power process, the Cyclone IV device family offers the

following two variants:

■Cyclone IV E—lowest power, high functionality with the lowest cost

■Cyclone IV GX—lowest power and lowest cost FPGAs with 3.125 Gbps

transceivers

1Cyclone IV E devices are offered in core voltage of 1.0 V and 1.2 V.

fFor more information, refer to the Power Requirements for Cyclone IV Devices

chapter.

Providing power and cost savings without sacrificing performance, along with a

low-cost integrated transceiver option, Cyclone IV devices are ideal for low-cost,

small-form-factor applications in the wireless, wireline, broadcast, industrial,

consumer, and communications industries.

Cyclone IV Device Family Features

The Cyclone IV device family offers the following features:

■Low-cost, low-power FPGA fabric:

■6K to 150K logic elements

■Up to 6.3 Mb of embedded memory

■Up to 360 18 × 18 multipliers for DSP processing intensive applications

■Protocol bridging applications for under 1.5 W total power

May 2013

CYIV-51001-1.8

1–2 Chapter 1: Cyclone IV FPGA Device Family Overview

Cyclone IV Device Family Features

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

■Cyclone IV GX devices offer up to eight high-speed transceivers that provide:

■Data rates up to 3.125 Gbps

■8B/10B encoder/decoder

■8-bit or 10-bit physical media attachment (PMA) to physical coding sublayer

(PCS) interface

■Byte serializer/deserializer (SERDES)

■Word aligner

■Rate matching FIFO

■TX bit slipper for Common Public Radio Interface (CPRI)

■Electrical idle

■Dynamic channel reconfiguration allowing you to change data rates and

protocols on-the-fly

■Static equalization and pre-emphasis for superior signal integrity

■150 mW per channel power consumption

■Flexible clocking structure to support multiple protocols in a single transceiver

block

■Cyclone IV GX devices offer dedicated hard IP for PCI Express (PIPE) (PCIe)

Gen 1:

■×1, ×2, and ×4 lane configurations

■End-point and root-port configurations

■Up to 256-byte payload

■One virtual channel

■2 KB retry buffer

■4 KB receiver (Rx) buffer

■Cyclone IV GX devices offer a wide range of protocol support:

■PCIe (PIPE) Gen 1 ×1, ×2, and ×4 (2.5 Gbps)

■Gigabit Ethernet (1.25 Gbps)

■CPRI (up to 3.072 Gbps)

■XAUI (3.125 Gbps)

■Triple rate serial digital interface (SDI) (up to 2.97 Gbps)

■Serial RapidIO (3.125 Gbps)

■Basic mode (up to 3.125 Gbps)

■V-by-One (up to 3.0 Gbps)

■DisplayPort (2.7 Gbps)

■Serial Advanced Technology Attachment (SATA) (up to 3.0 Gbps)

■OBSAI (up to 3.072 Gbps)

Chapter 1: Cyclone IV FPGA Device Family Overview 1–3

Device Resources

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

■Up to 532 user I/Os

■LVDS interfaces up to 840 Mbps transmitter (Tx), 875 Mbps Rx

■Support for DDR2 SDRAM interfaces up to 200 MHz

■Support for QDRII SRAM and DDR SDRAM up to 167 MHz

■Up to eight phase-locked loops (PLLs) per device

■Offered in commercial and industrial temperature grades

Device Resources

Table 1–1 lists Cyclone IV E device resources.

Table 1–1. Resources for the Cyclone IV E Device Family

Resources

EP4CE6

EP4CE10

EP4CE15

EP4CE22

EP4CE30

EP4CE40

EP4CE55

EP4CE75

EP4CE115

Logic elements (LEs) 6,272 10,320 15,408 22,320 28,848 39,600 55,856 75,408 114,480

Embedded memory

(Kbits) 270 414 504 594 594 1,134 2,340 2,745 3,888

Embedded 18 × 18

multipliers 15 23 56 66 66 116 154 200 266

General-purpose PLLs22444444 4

Global Clock Networks 10 10 20 20 20 20 20 20 20

User I/O Banks 88888888 8

Maximum user I/O (1) 179 179 343 153 532 532 374 426 528

Note to Table 1–1:

(1) The user I/Os count from pin-out files includes all general purpose I/O, dedicated clock pins, and dual purpose configuration pins. Transceiver

pins and dedicated configuration pins are not included in the pin count.

1–4 Chapter 1: Cyclone IV FPGA Device Family Overview

Device Resources

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

Table 1–2 lists Cyclone IV GX device resources.

Table 1–2. Resources for the Cyclone IV GX Device Family

Resources

EP4CGX15

EP4CGX22

EP4CGX30

(1)

EP4CGX30

(2)

EP4CGX50

(3)

EP4CGX75

(3)

EP4CGX110

(3)

EP4CGX150

(3)

Logic elements (LEs) 14,400 21,280 29,440 29,440 49,888 73,920 109,424 149,760

Embedded memory (Kbits) 540 756 1,080 1,080 2,502 4,158 5,490 6,480

Embedded 18 × 18 multipliers 0 40 80 80 140 198 280 360

General purpose PLLs 1 2 2 4 (4) 4 (4) 4 (4) 4 (4) 4 (4)

Multipurpose PLLs 2 (5) 2 (5) 2 (5) 2 (5) 4 (5) 4 (5) 4 (5) 4 (5)

Global clock networks 20 20 20 30 30 30 30 30

High-speed transceivers (6) 24448888

Transceiver maximum data rate

(Gbps) 2.5 2.5 2.5 3.125 3.125 3.125 3.125 3.125

PCIe (PIPE) hard IP blocks 11111111

User I/O banks 9 (7) 9 (7) 9 (7) 11 (8) 11 (8) 11 (8) 11 (8) 11 (8)

Maximum user I/O (9) 72 150 150 290 310 310 475 475

Notes to Table 1–2:

(1) Applicable for the F169 and F324 packages.

(2) Applicable for the F484 package.

(3) Only two multipurpose PLLs for F484 package.

(4) Two of the general purpose PLLs are able to support transceiver clocking. For more information, refer to the Clock Networks and PLLs in

Cyclone IV Devices chapter.

(5) You can use the multipurpose PLLs for general purpose clocking when they are not used to clock the transceivers. For more information, refer

to the Clock Networks and PLLs in Cyclone IV Devices chapter.

(6) If PCIe 1, you can use the remaining transceivers in a quad for other protocols at the same or different data rates.

(7) Including one configuration I/O bank and two dedicated clock input I/O banks for HSSI reference clock input.

(8) Including one configuration I/O bank and four dedicated clock input I/O banks for HSSI reference clock input.

(9) The user I/Os count from pin-out files includes all general purpose I/O, dedicated clock pins, and dual purpose configuration pins. Transceiver

pins and dedicated configuration pins are not included in the pin count.

Chapter 1: Cyclone IV FPGA Device Family Overview 1–5

Package Matrix

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

Package Matrix

Table 1–3 lists Cyclone IV E device package offerings.

Table 1–3. Package Offerings for the Cyclone IV E Device Family (1), (2)

Package E144 M164 M256 U256 F256 F324 U484 F484 F780

Size (mm) 22 × 22 8 × 8 9 x 9 14 × 14 17 × 17 19 x 19 19 × 19 23 × 23 29 × 29

Pitch (mm) 0.5 0.5 0.5 0.8 1.0 1.0 0.8 1.0 1.0

Device

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

User I/O

LVDS (3)

EP4CE6 9121————1796617966————————

EP4CE109121————1796617966————————

EP4CE1581188921165531655316553————343137——

EP4CE227917————1535215352————————

EP4CE30 — — — — — — — — — — 193 68 — — 328 124 532 224

EP4CE40 — — — — — — — — — — 193 68 328 124 328 124 532 224

EP4CE55 — — — — — — — — — — — — 324 132 324 132 374 160

EP4CE75 — — — — — — — — — — — — 292 110 292 110 426 178

EP4CE115 — — — — — — — — — — ————280103528230

Notes to Table 1–3:

(1) The E144 package has an exposed pad at the bottom of the package. This exposed pad is a ground pad that must be connected to the ground plane of your PCB. Use this exposed pad for electrical

connectivity and not for thermal purposes.

(2) Use the Pin Migration View window in Pin Planner of the Quartus II software to verify the pin migration compatibility when you perform device migration. For more information, refer to the I/O

Management chapter in volume 2 of the Quartus II Handbook.

(3) This includes both dedicated and emulated LVDS pairs. For more information, refer to the I/O Features in Cyclone IV Devices chapter.

1–6 Chapter 1: Cyclone IV FPGA Device Family Overview

Package Matrix

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

Table 1–4 lists Cyclone IV GX device package offerings, including I/O and transceiver counts.

Table 1–4. Package Offerings for the Cyclone IV GX Device Family (1)

Package N148 F169 F324 F484 F672 F896

Size (mm) 11 × 11 14 × 14 19 × 19 23 × 23 27 × 27 31 × 31

Pitch (mm) 0.5 1.0 1.0 1.0 1.0 1.0

Device

User I/O

LVDS (2)

XCVRs

User I/O

LVDS (2)

XCVRs

User I/O

LVDS (2)

XCVRs

User I/O

LVDS (2)

XCVRs

User I/O

LVDS (2)

XCVRs

User I/O

LVDS (2)

XCVRs

EP4CGX15 72 25 2 72 25 2 — — — — — — — — — — — —

EP4CGX22 — — — 72 25 2 150 64 4 — — — — — — — — —

EP4CGX30 — — — 72 25 2 150 64 4 290 130 4 — — — — — —

EP4CGX50 — — — — — — — — — 290 130 4 310 140 8 — — —

EP4CGX75 — — — — — — — — — 290 130 4 310 140 8 — — —

EP4CGX110 — — — — — — — — — 270 120 4 393 181 8 475 220 8

EP4CGX150 — — — — — — — — — 270 120 4 393 181 8 475 220 8

Note to Table 1–4:

(1) Use the Pin Migration View window in Pin Planner of the Quartus II software to verify the pin migration compatibility when you perform device migration. For more information, refer to the I/O

Management chapter in volume 2 of the Quartus II Handbook.

(2) This includes both dedicated and emulated LVDS pairs. For more information, refer to the I/O Features in Cyclone IV Devices chapter.

Chapter 1: Cyclone IV FPGA Device Family Overview 1–7

Cyclone IV Device Family Speed Grades

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

Cyclone IV Device Family Speed Grades

Table 1–5 lists the Cyclone IV GX devices speed grades.

Table 1–6 lists the Cyclone IV E devices speed grades.

Table 1–5. Speed Grades for the Cyclone IV GX Device Family

Device N148 F169 F324 F484 F672 F896

EP4CGX15 C7, C8, I7 C6, C7, C8, I7 — — — —

EP4CGX22 — C6, C7, C8, I7 C6, C7, C8, I7 — — —

EP4CGX30 — C6, C7, C8, I7 C6, C7, C8, I7 C6, C7, C8, I7 — —

EP4CGX50 — — — C6, C7, C8, I7 C6, C7, C8, I7 —

EP4CGX75 — — — C6, C7, C8, I7 C6, C7, C8, I7 —

EP4CGX110 — — — C7, C8, I7 C7, C8, I7 C7, C8, I7

EP4CGX150 — — — C7, C8, I7 C7, C8, I7 C7, C8, I7

Table 1–6. Speed Grades for the Cyclone IV E Device Family (1),(2)

Device E144 M164 M256 U256 F256 F324 U484 F484 F780

EP4CE6

C8L, C9L, I8L

C6, C7, C8, I7,

——I7N

C8L, C9L, I8L

C6, C7, C8, I7,

—— — —

EP4CE10

C8L, C9L, I8L

C6, C7, C8, I7,

——I7N

C8L, C9L, I8L

C6, C7, C8, I7,

—— — —

EP4CE15 C8L, C9L, I8L

C6, C7, C8, I7 I7N C7N, I7N I7N

C8L, C9L, I8L

C6, C7, C8, I7,

——

C8L, C9L, I8L

C6, C7, C8, I7,

—

EP4CE22

C8L, C9L, I8L

C6, C7, C8, I7,

——I7N

C8L, C9L, I8L

C6, C7, C8, I7,

—— — —

EP4CE30 — — — — — A7N —

C8L, C9L, I8L

C6, C7, C8, I7,

C8L, C9L, I8L

C6, C7, C8, I7

EP4CE40 — — — — — A7N I7N

C8L, C9L, I8L

C6, C7, C8, I7,

C8L, C9L, I8L

C6, C7, C8, I7

EP4CE55 — — — — — — I7N C8L, C9L, I8L

C6, C7, C8, I7

C8L, C9L, I8L

C6, C7, C8, I7

EP4CE75 — — — — — — I7N C8L, C9L, I8L

C6, C7, C8, I7

C8L, C9L, I8L

C6, C7, C8, I7

EP4CE115 — — — — — — — C8L, C9L, I8L

C7, C8, I7

C8L, C9L, I8L

C7, C8, I7

Notes to Table 1–6:

(1) C8L, C9L, and I8L speed grades are applicable for the 1.0-V core voltage.

(2) C6, C7, C8, I7, and A7 speed grades are applicable for the 1.2-V core voltage.

1–8 Chapter 1: Cyclone IV FPGA Device Family Overview

Cyclone IV Device Family Architecture

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

Cyclone IV Device Family Architecture

This section describes Cyclone IV device architecture and contains the following

topics:

■“FPGA Core Fabric”

■“I/O Features”

■“Clock Management”

■“External Memory Interfaces”

■“Configuration”

■“High-Speed Transceivers (Cyclone IV GX Devices Only)”

■“Hard IP for PCI Express (Cyclone IV GX Devices Only)”

FPGA Core Fabric

Cyclone IV devices leverage the same core fabric as the very successful Cyclone series

devices. The fabric consists of LEs, made of 4-input look up tables (LUTs), memory

blocks, and multipliers.

Each Cyclone IV device M9K memory block provides 9 Kbits of embedded SRAM

memory. You can configure the M9K blocks as single port, simple dual port, or true

dual port RAM, as well as FIFO buffers or ROM. They can also be configured to

implement any of the data widths in Table 1–7.

The multiplier architecture in Cyclone IV devices is the same as in the existing

Cyclone series devices. The embedded multiplier blocks can implement an 18 × 18 or

two 9 × 9 multipliers in a single block. Altera offers a complete suite of DSP IP

including finite impulse response (FIR), fast Fourier transform (FFT), and numerically

controlled oscillator (NCO) functions for use with the multiplier blocks. The

Quartus®II design software’s DSP Builder tool integrates MathWorks Simulink and

MATLAB design environments for a streamlined DSP design flow.

fFor more information, refer to the Logic Elements and Logic Array Blocks in Cyclone IV

Devices, Memory Blocks in Cyclone IV Devices, and Embedded Multipliers in Cyclone IV

Devices chapters.

Table 1–7. M9K Block Data Widths for Cyclone IV Device Family

Mode Data Width Configurations

Single port or simple dual port ×1, ×2, ×4, ×8/9, ×16/18, and ×32/36

True dual port ×1, ×2, ×4, ×8/9, and ×16/18

Chapter 1: Cyclone IV FPGA Device Family Overview 1–9

Cyclone IV Device Family Architecture

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

I/O Features

Cyclone IV device I/O supports programmable bus hold, programmable pull-up

resistors, programmable delay, programmable drive strength, programmable

slew-rate control to optimize signal integrity, and hot socketing. Cyclone IV devices

support calibrated on-chip series termination (Rs OCT) or driver impedance matching

(Rs) for single-ended I/O standards. In Cyclone IV GX devices, the high-speed

transceiver I/Os are located on the left side of the device. The top, bottom, and right

sides can implement general-purpose user I/Os.

Table 1–8 lists the I/O standards that Cyclone IV devices support.

The LVDS SERDES is implemented in the core of the device using logic elements.

fFor more information, refer to the I/O Features in Cyclone IV Devices chapter.

Clock Management

Cyclone IV devices include up to 30 global clock (GCLK) networks and up to eight

PLLs with five outputs per PLL to provide robust clock management and synthesis.

You can dynamically reconfigure Cyclone IV device PLLs in user mode to change the

clock frequency or phase.

Cyclone IV GX devices support two types of PLLs: multipurpose PLLs and general-

purpose PLLs:

■Use multipurpose PLLs for clocking the transceiver blocks. You can also use them

for general-purpose clocking when they are not used for transceiver clocking.

■Use general purpose PLLs for general-purpose applications in the fabric and

periphery, such as external memory interfaces. Some of the general purpose PLLs

can support transceiver clocking.

fFor more information, refer to the Clock Networks and PLLs in Cyclone IV Devices

chapter.

External Memory Interfaces

Cyclone IV devices support SDR, DDR, DDR2 SDRAM, and QDRII SRAM interfaces

on the top, bottom, and right sides of the device. Cyclone IV E devices also support

these interfaces on the left side of the device. Interfaces may span two or more sides of

the device to allow more flexible board design. The Altera® DDR SDRAM memory

interface solution consists of a PHY interface and a memory controller. Altera supplies

the PHY IP and you can use it in conjunction with your own custom memory

controller or an Altera-provided memory controller. Cyclone IV devices support the

use of error correction coding (ECC) bits on DDR and DDR2 SDRAM interfaces.

Table 1–8. I/O Standards Support for the Cyclone IV Device Family

Type I/O Standard

Single-Ended I/O LVTTL, LVCMOS, SSTL, HSTL, PCI, and PCI-X

Differential I/O SSTL, HSTL, LVPECL, BLVDS, LVDS, mini-LVDS, RSDS, and PPDS

1–10 Chapter 1: Cyclone IV FPGA Device Family Overview

Cyclone IV Device Family Architecture

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

fFor more information, refer to the External Memory Interfaces in Cyclone IV Devices

chapter.

Configuration

Cyclone IV devices use SRAM cells to store configuration data. Configuration data is

downloaded to the Cyclone IV device each time the device powers up. Low-cost

configuration options include the Altera EPCS family serial flash devices and

commodity parallel flash configuration options. These options provide the flexibility

for general-purpose applications and the ability to meet specific configuration and

wake-up time requirements of the applications.

Table 1–9 lists which configuration schemes are supported by Cyclone IV devices.

IEEE 1149.6 (AC JTAG) is supported on all transceiver I/O pins. All other pins

support IEEE 1149.1 (JTAG) for boundary scan testing.

fFor more information, refer to the JTAG Boundary-Scan Testing for Cyclone IV Devices

chapter.

For Cyclone IV GX devices to meet the PCIe 100 ms wake-up time requirement, you

must use passive serial (PS) configuration mode for the EP4CGX15/22/30 devices

and use fast passive parallel (FPP) configuration mode for the EP4CGX30F484 and

EP4CGX50/75/110/150 devices.

fFor more information, refer to the Configuration and Remote System Upgrades in

Cyclone IV Devices chapter.

The cyclical redundancy check (CRC) error detection feature during user mode is

supported in all Cyclone IV GX devices. For Cyclone IV E devices, this feature is only

supported for the devices with the core voltage of 1.2 V.

fFor more information about CRC error detection, refer to the SEU Mitigation in

Cyclone IV Devices chapter.

High-Speed Transceivers (Cyclone IV GX Devices Only)

Cyclone IV GX devices contain up to eight full duplex high-speed transceivers that

can operate independently. These blocks support multiple industry-standard

communication protocols, as well as Basic mode, which you can use to implement

your own proprietary protocols. Each transceiver channel has its own pre-emphasis

and equalization circuitry, which you can set at compile time to optimize signal

integrity and reduce bit error rates. Transceiver blocks also support dynamic

reconfiguration, allowing you to change data rates and protocols on-the-fly.

Table 1–9. Configuration Schemes for Cyclone IV Device Family

Devices Supported Configuration Scheme

Cyclone IV GX AS, PS, JTAG, and FPP (1)

Cyclone IV E AS, AP, PS, FPP, and JTAG

Note to Table 1–9:

(1) The FPP configuration scheme is only supported by the EP4CGX30F484 and EP4CGX50/75/110/150 devices.

Chapter 1: Cyclone IV FPGA Device Family Overview 1–11

Cyclone IV Device Family Architecture

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

Figure 1–1 shows the structure of the Cyclone IV GX transceiver.

fFor more information, refer to the Cyclone IV Transceivers Architecture chapter.

Hard IP for PCI Express (Cyclone IV GX Devices Only)

Cyclone IV GX devices incorporate a single hard IP block for ×1, ×2, or ×4 PCIe (PIPE)

in each device. This hard IP block is a complete PCIe (PIPE) protocol solution that

implements the PHY-MAC layer, Data Link Layer, and Transaction Layer

functionality. The hard IP for the PCIe (PIPE) block supports root-port and end-point

configurations. This pre-verified hard IP block reduces risk, design time, timing

closure, and verification. You can configure the block with the Quartus II software’s

PCI Express Compiler, which guides you through the process step by step.

fFor more information, refer to the PCI Express Compiler User Guide.

Figure 1–1. Transceiver Channel for the Cyclone IV GX Device

RX Phase

Compensation

FIFO

TX Phase

Compensation

FIFO

Byte Ordering

Byte Deserializer

Byte Serializer

8B10B Decoder

8B10B Encoder

Rate Match FIFO

Receiver Channel PCS Receiver Channel

PMA

Word Aligner

rx_datain

Deserializer

CDR

Transmitter Channel PCS Transceiver Channel

PMA

tx_dataout

Serializer

PCI Express hard IP

FPGA

Fabric

PIPE Interface

1–12 Chapter 1: Cyclone IV FPGA Device Family Overview

Reference and Ordering Information

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1

Reference and Ordering Information

Figure 1–2 shows the ordering codes for Cyclone IV GX devices.

Figure 1–3 shows the ordering codes for Cyclone IV E devices.

Figure 1–2. Packaging Ordering Information for the Cyclone IV GX Device

Family Signature

Transceiver Count

Package Type

Package Code

Operating Temperature

Speed Grade

Optional Suffix

Indicates specific device

options or shipment method

GX : 3-Gbps transceivers

EP4C : Cyclone IV

15 : 14,400 logic elements

22 : 21,280 logic elements

30 : 29,440 logic elements

50 : 49,888 logic elements

75 : 73,920 logic elements

110 : 109,424 logic elements

150 : 149,760 logic elements

B : 2

C : 4

D : 8

F : FineLine BGA (FBGA)

N : Quad Flat Pack No Lead (QFN)

FBGA Package Type

14 : 169 pins

19 : 324 pins

23 : 484 pins

27 : 672 pins

31 : 896 pins

QFN Package Type

11 : 148 pins

C : Commercial temperature (TJ = 0° C to 85° C)

I : Industrial temperature (TJ = -40° C to 100° C)

6 (fastest)

N : Lead-free packaging

ES : Engineering sample

EP4C GX 30 C F 19 C 7 N

Member Code

Family Variant

Figure 1–3. Packaging Ordering Information for the Cyclone IV E Device

Family Signature

Package Code

Operating Temperature

Speed Grade

Optional Suffix

Indicates specific device

options or shipment method

E : Enhanced logic/memory

EP4C : Cyclone IV

6 : 6,272 logic elements

10 : 10,320 logic elements

15 : 15,408 logic elements

22 : 22,320 logic elements

30 : 28,848 logic elements

40 : 39,600 logic elements

55 : 55,856 logic elements

75 : 75,408 logic elements

115 : 114,480 logic elements

F : FineLine BGA (FBGA)

E : Enhanced Thin Quad Flat Pack (EQFP)

U : Ultra FineLine BGA (UBGA)

M : Micro FineLine BGA (MBGA)

FBGA Package Type

17 : 256 pins

19 : 324 pins

23 : 484 pins

29 : 780 pins

EQFP Package Type

22 : 144 pins

UBGA Package Type

14 : 256 pins

19 : 484 pins

MBGA Package Type

8 : 164 pins

9 : 256 pins

C : Commercial temperature (TJ = 0° C to 85° C)

I : Industrial temperature (TJ = -40° C to 100° C)

Extended industrial temperature (TJ = -40° C to 125° C)

A : Automotive temperature (TJ = -40° C to 125° C)

6 (fastest)

N : Lead-free packaging

ES : Engineering sample

L : Low-voltage device

EP4C E 40 F 29 C 8N

Member Code

Family Variant

Chapter 1: Cyclone IV FPGA Device Family Overview 1–13

Document Revision History

May 2013 Altera Corporation Cyclone IV Device Handbook,

Volume 1

Document Revision History

Table 1–10 lists the revision history for this chapter.

Table 1–10. Document Revision History

Date Version Changes

May 2013 1.8 Updated Table 1–3, Table 1–6 and Figure 1–3 to add new device options and

packages.

February 2013 1.7 Updated Table 1–3, Table 1–6 and Figure 1–3 to add new device options and

packages.

October 2012 1.6 Updated Table 1–3 and Table 1–4.

November 2011 1.5

■Updated “Cyclone IV Device Family Features” section.

■Updated Figure 1–2 and Figure 1–3.

December 2010 1.4

■Updated for the Quartus II software version 10.1 release.

■Added Cyclone IV E new device package information.

■Updated Table 1–1, Table 1–2, Table 1–3, Table 1–5, and Table 1–6.

■Updated Figure 1–3.

■Minor text edits.

July 2010 1.3 Updated Table 1–2 to include F484 package information.

March 2010 1.2

■Updated Table 1–3 and Table 1–6.

■Updated Figure 1–3.

■Minor text edits.

February 2010 1.1

■Added Cyclone IV E devices in Table 1–1, Table 1–3, and Table 1–6 for the

Quartus II software version 9.1 SP1 release.

■Added the “Cyclone IV Device Family Speed Grades” and “Configuration”

sections.

■Added Figure 1–3 to include Cyclone IV E Device Packaging Ordering

Information.

■Updated Table 1–2, Table 1–4, and Table 1–5 for Cyclone IV GX devices.

■Minor text edits.

November 2009 1.0 Initial release.

1–14 Chapter 1: Cyclone IV FPGA Device Family Overview

Document Revision History

Cyclone IV Device Handbook, May 2013 Altera Corporation

Volume 1