J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors FEATURES * Highest Energy per volume * Fast DCL drop with Voltage applied after reflow * Benign failure mode under recommended use conditions * Low ESR * Undertab terminations layout: - High Volumetric Efficiency - Low profile case sizes - High capacitance in smaller dimensions - Close positioning of several parts for efficient high density PCB layout * 3x reflow 260C compatible LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS * Power backup for SSDs (MLC, SLC, EFD, PCIe), battery-powered portable equipment, industrial alarms, smart power meters, and mobile devices. J-LEAD UNDERTAB Polarity Band (Anode+) W Polarity Band (Anode+) L W W H L W H WP AP S AN WN WP AP S AN WN CASE DIMENSIONS Undertab: millimeters (inches) Code EIA Code EIA Metric L0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) H max. WP0.10 (0.004) WN0.10 (0.004) AP0.10 (0.004) AN0.10 (0.004) S Min. L 1210 3528-10 3.50 (0.138) 2.80 (0.110) 1.00 (0.039) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) CASE DIMENSIONS J-lead: millimeters (inches) Code C D E H 5 EIA Code 2312 2917 2917 1210 2917 EIA Metric 6032-28 7343-31 7343-43 3528-15 7343-40 L0.20 W+0.20 (0.008) H+0.20 (0.008) (0.008) -0.10 (0.004) -0.10 (0.004) 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) max. 7.30 (0.287) 4.30 (0.169) 3.80 (0.150) W10.20 (0.008) 2.20 (0.087) 2.40 (0.094) 2.40 (0.094) 2.20 (0.087) 2.40 (0.094) A+0.30 (0.012) -0.20 (0.008) 1.30 (0.051) 1.30 (0.051) 1.30 (0.051) 0.80 (0.031) 1.30 (0.051) MAXIMUM ENERGY PER CASE SIZE S Min. Case Size C D E H L T X 4 5 2.90 (0.114) 4.40 (0.173) 4.40 (0.173) 1.40 (0.055) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. MARKING 4 CASE C, D, E, H, L, T, X, 5 CASE AVX LOGO Polymer Polarity Band (Anode+) Capacitance Value in pF 156 = 15F 156 J XXXXX AVX LOGO Polymer Polarity Band (Anode+) AVX LOGO Polymer Rated Voltage J = 6.3V Polarity Band (Anode+) 158 J AVX LOGO Polymer Capacitance Value in pF 157 = 150F 157 C XXXXX Rated Voltage C = 16V Polarity Band (Anode+) Rated Voltage J = 6.3V ID Code Capacitance Value in pF 107 = 100F 107 V XXXXX ID Code Max Energy (mJ) 5.8 21.8 11.9 2.6 1.8 6.5 18.2 43.0 46.6 Capacitance Value in pF 158 = 1500F XXXXX ID Code H Max (mm) 2.8 3.1 4.3 1.5 1.0 1.2 1.5 2.0 4.0 Rated Voltage V = 35V ID Code HOW TO ORDER TCN 4 158 M Type TCJ TCN Case Size See table above Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = 20% 220 006 010 016 020 006 R 0055 E Rated DC Voltage Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel (J-Lead) ESR in m Additional Character E = Black resin = = = = 6.3Vdc 10Vdc 16Vdc 20Vdc 025 = 25Vdc 035 = 35Vdc 050 = 50Vdc 032819 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Surge Voltage (VS) Temperature Range: Reliability: +85C: +85C: All technical data relate to an ambient temperature of +25C 4.7 F to 1500 F 20% 0.1CV 6.3 10 16 20 25 35 50 8 13 21 26 33 46 65 -55C up to +125C 1% per 1000 hours at 85C, VR with 0.1/V series impedance 60% confidence level NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 4.7 475 6.8 10 15 22 685 106 156 226 Rated Voltage DC to 85C, [mJ] 6.3V (J) 10V (A) 33 336 47 476 68 686 100 107 150 157 T(200E) [1.7] D(45) 220 227 H(170) [2.6] D(40) 330 337 D(40) [3.8] 5(100) 470 1000 1500 477 108 158 X(50) 4(55) 4(55) H(100E) C(100) H(100E) [0.8] D(45) D(45) [5.4] [11.6] [17.4] 16V (C) 20V (D) 35V (V) L(300) [1.8] T(200E) T(200E) [3.3] T(250E) [6.5] D(70) [12.8] [4.7] X(100) [9.2] X(150E) [18.2] [6.7] D(55) [3.6] D(50) [9.9] D(55) [19.6] 4(100E) [14.9] [8.4] D(70) D(70) [12.4] 4(100) 4(70) [21.8] 4(100) [27.2] 4(100E) [43.0] 50V (T) C(200) [3.9] D(120) [5.8] E(70) [8.5] T(200E) C(200) [4.3] D(100) H(150E) T(200E) T(200) [1.7] T(150E) [2.5] D(50) [5.4] X(100E) D(50) [7.9] 4(70) 4(70E) [11.9] 5(100) 5(100) 25V (E) [5.4] [8.0] [11.9] [13.3] [38.8] [29.3] [32.7] [46.6] Not recommended for new designs; higher voltage or smaller case size alternatives are available. Released ratings, (ESR ratings in mOhms in parentheses) [Energy in mJ] Engineering samples - please contact AVX Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. 032819 221 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors RATINGS & PART NUMBER REFERENCE AVX Part No. Maximum Case Capacitance Rated Operating Voltage Temperature Size (F) (V) (C) TCJH686M006#0100E TCNT157M006#0200E TCJH227M006#0170 TCJD337M006#0040 TCNX477M006#0050 TCN4108M006#0055 TCN4158M006#0055 H T H D X 4 4 68 150 220 330 470 1000 1500 6.3 6.3 6.3 6.3 6.3 6.3 6.3 105 105 105 105 85 85 85 TCJH476M010#0100E TCJC476M010#0100 TCJD686M010#0045 TCJD107M010#0045 TCJD157M010#0045 TCJD227M010#0040 TCJ5337M010#0100 H C D D D D 5 47 47 68 100 150 220 330 10 10 10 10 10 10 10 105 125 105 105 105 105 105 TCJH336M016#0150E TCNT336M016#0200E TCNT476M016#0150E TCNT476M016#0200 TCJD686M016#0050 TCJD107M016#0050 TCNX157M016#0100E TCJD227M016#0050 TCN4227M016#0070 TCN4337M016#0070E TCJ5337M016#0100 TCJ5477M016#0100 H T T T D D X D 4 4 5 5 33 33 47 47 68 100 150 220 220 330 330 470 16 16 16 16 16 16 16 16 16 16 16 16 105 105 105 105 105 105 85 105 105 105 105 105 TCJD686M020#0055 TCJD107M020#0055 TCN4227M020#0100 D D 4 68 100 220 20 20 20 105 105 85 TCNT226M025#0200E TCNT336M025#0250E TCNX476M025#0100 TCJD686M025#0070 TCJD107M025#0070 TCN4107M025#0100 TCN4157M025#0070 TCN4227M025#0100E T T X D D 4 4 4 22 33 47 68 100 100 150 220 25 25 25 25 25 25 25 25 105 105 105 105 105 105 105 105 TCNL475M035#0300 TCNT475M035#0200E TCNT106M035#0200E TCJC156M035#0200 TCJD226M035#0100 TCJD336M035#0070 TCNX476M035#0150E TCN4107M035#0100E L T T C D D X 4 4.7 4.7 10 15 22 33 47 100 35 35 35 35 35 35 35 35 105 105 105 105 105 105 105 105 TCJC685M050#0200 TCJD106M050#0120 TCJE156M050#0070 C D E 6.8 10 15 50 50 50 105 105 105 DCL Max. (A) DF Max. (%) ESR 1000kHz Max. RMS Product @ 100kHz Current Category (m) (mA) 45C 6.3 Volt @ 85C 40.8 6 100 90 10 200 132 10 170 198 6 40 282 10 50 600 20 55 900 20 55 10 Volt @ 85C 47 6 100 47 6 100 68 6 45 100 6 45 150 6 45 220 6 40 330 10 100 16 Volt @ 85C 52.8 6 150 52.8 6 200 75.2 6 150 75.2 6 200 108.8 6 50 160 6 50 240 6 100 352 10 50 352 20 70 528 20 70 528 10 100 752 10 100 20 Volt @ 85C 136 6 55 200 6 55 440 10 100 25 Volt @ 85C 55 6 200 82.5 10 250 117.5 6 100 170 6 70 250 6 70 250 6 100 375 6 70 550 10 100 35 Volt @ 85C 16.5 6 300 16.5 10 200 35 10 200 52.5 6 200 77 6 100 115.5 6 70 165 10 150 350 10 100 50 Volt @ 85C 34 8 200 50 10 120 75 6 70 Energy is calculated by this formula (consider derating factor): Energy = 1/2 C x ((Vr x X)2 - Vx2) where C = Capacitance Vr = Rated Voltage X = Recommended derating factor Vx= 3V (invariable) MSL Energy (mJ) ENERGY Energy/volume (mJ/cm3) Energy/area (mJ/cm2) 1000 700 800 2400 1900 1860 1860 3 3 3 2 5 5 5 3 4 3 3 5 4 4 0.8 1.7 2.6 3.8 5.4 11.6 17.4 54 147 173 42 115 130 195 8.0 17.7 26 12.2 17.3 26 39 1000 1300 2200 2200 2200 2400 1300 3 1 3 3 3 3 2 3 3 3 3 3 3 3 1.7 1.7 2.5 3.6 5.4 7.9 11.9 115 34 27 40 59 87 100 17.3 8.8 7.8 11.5 17.2 25.2 37.8 800 700 800 700 2100 2100 1300 2100 1650 1650 1300 1300 3 3 3 3 2 2 5 2 2 3 2 3 3 4 4 4 3 3 4 3 4 4 3 3 3.3 3.3 4.7 4.7 6.7 9.9 14.9 21.8 21.8 32.7 32.7 46.6 223 277 395 395 74 109 316 240 245 367 274 391 33.4 33.4 47.6 47.6 21.5 31.6 47.4 69.5 49 73.5 104.2 148.5 2000 2000 1380 3 3 5 3 3 4 8.4 12.4 27.2 92 136 305 26.7 39.3 61.1 700 600 1300 1800 1800 1380 1650 1380 3 3 2 2 2 2 2 3 4 4 5 3 3 4 4 4 4.3 6.5 9.2 13.3 19.6 19.6 29.3 43.0 364 547 195 146 215 219 329 483 43.9 65.8 29.3 42.3 62.3 43.9 65.9 96.7 600 700 700 900 1500 1800 1100 1380 2 3 3 3 2 2 3 2 5 4 4 3 3 3 4 4 1.8 1.8 3.9 5.8 8.5 12.8 18.2 38.8 186 154 328 116 94 141 387 435 18.6 18.6 39.5 30.3 27.1 40.7 58.0 87.1 900 1400 1900 3 3 3 3 3 3 5.4 8.0 11.9 108 87 93 28.2 25.3 38 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance is measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 274. NOTE: AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. 222 032819 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr Product Category 1 Product Category 1 Product Category 2 Product Category 2 100% 100% 95% 90% 85% 80% 75% 70% Rated Voltage 95% 90% Recommended Application Voltage for Vr 10V 85% 80% Recommended Application Voltage for Vr 16V 75% 67% 65% 70% 60% 60% 55% 54% 55% 85C 125C Product Category Product Category 3, 4 3 90% 85% 80% 75% 70% Recommended Application Voltage for Vr 16V 50% -55C 85C 105C Product Category 5 Product Category 5 100% 100% 95% Recommended Application Voltage for Vr 10V 65% 60% 50% -55C Rated Voltage 95% Rated Voltage 90% Recommended Application Voltage for Vr 10V Recommended Application Voltage for Vr 16V 65% 85% 80% 75% 72% 64% 60% 032819 70% Recommended Application Voltage for Vr 10V Recommended Application Voltage for Vr 16V 65% 60% 55% 55% 50% -55C 80% Rated Voltage 85C 105C 50% -55C 85C 223 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors PRODUCT CATEGORY 1 (TEMPERATURE RANGE -55C TO +125C) TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Condition Apply rated voltage (Ur) at 85C and /or 2/3 rated voltage (Ur) at 125C for 2000 hours through a circuit impedance of 0.1/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 125C, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65C and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 TemperatureC +20 -55 +20 +85 +125 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x 2.3x rated voltage (Ur) at 125C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000 Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-202, Method 204, Condition D *Initial Limit 224 Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR DCL C/C DF Visual examination DCL C/C DF Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Characteristics no visible damage 1.25 x initial limit within 20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 2 x initial limit within 20% of initial value 1.5 x initial limit 2 x initial limit no visible damage 3 x initial limit within +30/-20% of initial value 1.5 x initial limit 2 x initial limit +20C -55C +20C +85C +125C +20C IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-20% 5% +20/-0% +30/-0% 5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* no visible damage initial limit within +10/-20% of initial value for Vr 10V within +20/-30% of initial value for Vr 16V 1.25 x initial limit no visible damage initial limit within 5% of initial value initial limit initial limit no visible damage initial limit within 5% of initial value initial limit initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85C for 24 hours. 032819 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55C TO +105C) TEST Endurance Storage Life Humidity Temperature Stability Surge Voltage Condition Apply rated voltage (Ur) at 85C for 2000 hours through a circuit impedance of 0.1/V (all CATEGORIES). And / or apply rated voltage (Ur) (CATEGORY 2) or 0.8x rated voltage (CATEGORY 3) at 105C for 2000 hours through a circuit impedance of 0.1/V. Always stabilize at room temperature for 1-2 hours before measuring. Store at 105C, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65C and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 6 TemperatureC +20 -55 +20 +85 +105 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x rated voltage (Ur) at 105C for CATEGORY 2, or apply 1.3x 0.8x rated voltage (Ur) at 105C for CATEGORY 3 for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000 Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-202, Method 204, Condition D *Initial Limit 032819 Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR DCL C/C DF Visual examination DCL C/C DF Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Characteristics no visible damage 1.25 x initial limit within +10/-20% of initial value for Vr 16V within 20% of initial value for Vr 20V 1.5 x initial limit 2 x initial limit no visible damage 1.25 x initial limit within +10/-20% of initial value for Vr 16V within 20% of initial value for Vr 20V 1.5 x initial limit 2 x initial limit no visible damage 3 x initial limit within +30/-20% of initial value 1.5 x initial limit 2 x initial limit +20C -55C +20C +85C +105C +20C IL* n/a IL* 10 x IL* 12.5 x IL* IL* n/a +0/-20% 5% +20/-0% +30/-0% 5% IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* no visible damage initial limit within +10/-20% of initial value for Vr 16V within +20/-30% of initial value for Vr 20V 1.25 x initial limit no visible damage initial limit within 5% of initial value initial limit initial limit no visible damage initial limit within 5% of initial value initial limit initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85C for 24 hours. 225 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55C TO +85C) TEST Condition Visual examination DCL Endurance Apply rated voltage (Ur) at 85C for 2000 hours through a circuit impedance of 0.1/V. Stabilize at room temperature for 1-2 hours before measuring. C/C DF ESR Visual examination DCL Storage Life Humidity Temperature Stability Surge Voltage Store at 85C, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65C and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Step 1 2 3 4 5 TemperatureC +20 -55 +20 +85 +20 Duration(min) 15 15 15 15 15 Apply 1.3x rated voltage (Ur) at 85C for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000 Mechanical Shock MIL-STD-202, Method 213, Condition C Vibration MIL-STD-202, Method 204, Condition D *Initial Limit 226 C/C DF ESR Visual examination DCL C/C DF ESR DCL C/C DF Visual examination DCL C/C DF Visual examination DCL C/C DF ESR Visual examination DCL C/C DF ESR Characteristics no visible damage 1.25 x initial limit within +10/-20% of initial value for Vr 16V within 20% of initial value for Vr 20V 1.5 x initial limit 2 x initial limit no visible damage 1.25 x initial limit within +10/-20% of initial value for Vr 16V within 20% of initial value for Vr 20V 1.5 x initial limit 2 x initial limit no visible damage 5 x initial limit within +40/-20% of initial value 1.5 x initial limit 2 x initial limit +20C -55C +20C +85C +20C IL* n/a IL* 10 x IL* IL* n/a +0/-20% 5% +20/-0% 5% IL* 1.5 x IL* IL* 1.5 x IL* IL* no visible damage initial limit within +10/-20% of initial value for Vr 16V within +20/-30% of initial value for Vr 20V 1.25 x initial limit no visible damage initial limit within 5% of initial value initial limit initial limit no visible damage initial limit within 5% of initial value initial limit initial limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85C for 24 hours. 032819 J-CAPTM Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONDUCTIVE POLYMER 032819 227