SXE15-48S1V8-R - Artesyn Embedded Technologies

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 1

2 YEAR WARRANTY

SXE15 Series

Single output

•High efficiency topology, 87% typical at 5 V

•Wide operating temperature, up to and exceeding 70 ˚C

(natural convection)

•90% to 110% output trim

•No minimum load

•Overvoltage protection

•Remote ON/OFF control

•Available RoHS compliant

The SXE15 is a new high efficiency open frame isolated 15 Watt converter series in

an industry standard footprint. All models in the series feature an input voltage range

of 33 Vdc to 75 Vdc and are available in output voltages of 12 V, 5 V, 3.3 V, 2.5 V

and 1.8 V. The output voltage on each model is adjustable from 90% to 110% of the

nominal value. Typical efficiencies for the models are 87% for the 5 V, 86% for the

3.3 V, 85% for the 2.5 V and 12 V and 83% for the 1.8 V version. The SXE15 series

also has a remote ON/OFF capability with active high or active low logic.

Overcurrent and overvoltage protection features are included as standard. With full

international safety approval including EN60950 and cUL1950, the SXE15 reduces

compliance costs and time to market.

All specifications are typical at nominal input, full load at 25 °C unless otherwise stated

OUTPUT SPECIFICATIONS

Voltage adjustability 90% to 110%

Total error band (See Note 13) ±4% max.

Line regulation 1.8 V and 2.5 V models 0.5% max.

Low line to high line 3.3 V and 5 V models 0.1% max.

Load regulation 1.8 V model 2.0% max.

Full load to min. load 2.5 V model 1.5% max.

3.3 V and 5 V models 0.5% max.

Minimum load (See Note 12) 0%

Overshoot 1.8 V and 2.5 V models 4% max.

At turn-on and turn-off 3.3 V and 5 V models None

Undershoot None

Ripple and noise 1.8 V and 2.5 V models 40 mV pk-pk

(See Note 1) 14 mV rms

5 Hz to 20 MHz 3.3 V and 5 V models 70 mV pk-p

20 mV rms

Transient response 1.8 V and 2.5 V models 150 mV

(See Note 2) 3.3 V and 5 V models 100 mV

Typical deviation 400 µs recovery to

within total error band

INPUT SPECIFICATIONS

Input voltage range 48 Vin nominal 33-75 Vdc

Input current No load 35 mA max.

Remote OFF 25 mA max.

Input current (max.) (See Note 4) 0.55 A max. @ Io max.

and Vin = 33-75 Vdc

Input reflected ripple (See Note 6) 5 mA (pk-pk) typ.

Active high remote ON/OFF (See Note 8)

Logic compatibility Open collector ref to -input

ON Open circuit or >2 Vdc

OFF <1.2 Vdc

Undervoltage lockout Power up 33 V (typ.)

Power down 30 V (typ.)

Start-up time Power up 1.5 ms (typ.)

(See Note 7) Remote ON/OFF 2.5 ms (typ.)

SPECIFICATIONS

File Name: sxe15s.pdf Rev (02): 08 Dec 2005

EMC CHARACTERISTICS

Conducted emissions

EN55022 (See Note 3)

Level A

EN55022 (See Note 3)

Level B

Radiated emissions

EN55022 (See Longform Datasheet)

Level B

Immunity:

ESD air EN61000-4-2 8 kV, 15 kV

ESD contact EN61000-4-2 6 kV, 8 kV

Radiated field enclosure EN61000-4-3 10 V/m

Conducted (dc power) EN61000-4-6 10 V

Conducted (signal) EN61000-4-6 10 V (See Note 11)

Input transients ETS 300 132-2, ETR 283

GENERAL SPECIFICATIONS

Efficiency See table

Operational insulation Input/output 1500 Vdc

Switching frequency Fixed 265 kHz typ.

Approvals and UL/cUL1950, EN60950

standards (See Notes 5) TÜV Rheinland

Material flammability UL94V-0

Weight 12 g (0.42 oz)

Coplanarity 150 µm

MTBF MIL-HDBK-217F 1,790,000 hours

Representative model: 48S05J @ 48 Vin, 40 °C,

100% load ground benign

BELLCORE 332 >1,500,000 hours

ENVIRONMENTAL SPECIFICATIONS

Thermal performance Operating ambient -40 °C to +65 °C

(See Note 9) temp. (3.3 V and 5 V)

Operating ambient -40 °C to +70 °C

temp. (1.8 V, 2.5 V

and 12 V)

Non-operating -40 °C to +120 °C

(All models)

TÜV

Tolerence: ±.015 (±.38)

Recommended Land & Hole Pattern

1.575 (40.01)

0.197 (5.00)

0.394 (10.01)

ø0.063 (ø1.60) 1.200 (30.48)

0.161 (4.09)

0.125 (3.18)

1.812 (46.02)

0.130 (3.30)

0.047 (1.18)

1.812 (46.02)

1.575 (40.01)

1.885 (47.88)

0.070 (1.78) MAX

1.812 (46.03)

0.335 (8.51) MAX

0.010 (0.25) MIN

1.905 (48.39)

1.390 (35.31)

1.150 (29.21)

leadframe length

overall length

BOTTOM VIEW

SIDE VIEW

TOP VIEW

ø.050 (ø1.27)

Non-Skid Retaining Pins,

2 Places 1

0.477 (12.11) 0.502 (12.75)

0.053 (1.36)

All Dimensions in Inches [mm]

0.069 (1.74)

0.197 (5.00)

0.394 (10.01)

1.181 (30.00)

1.378 (35.00)

0.100 (2.54)

12 places

0.063 (1.60)

0.053 (1.36)

1.181 (30.00)

1.378 (35.00)

Datasheet © Artesyn Technologies

2005

The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising

from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent

accompany the sale of any such product(s) or information contained herein.

For the most current data and application support visit www.artesyn.com/powergroup/products.htm

NNootteess

1Measured as per recommended set-up. See Application Note 116 for details.

2di/dt = 0.1 A/µs, Vin = 48 Vdc, Tc = 25 °C, load change = 0.5 lo max. to

0.75 lo max. and 0.75 lo max. to 0.5 lo max.

3The SXE15 meets level A and level B conducted emissions only with

external components connected before the input pins to the converter.

See Application Note 116 for details.

4Recommended input fusing is a 2 A HRC 200 V rated fuse.

5This product is only for inclusion by professional installers within other

equipment and must not be operated as a stand alone product.

6Measured with external Pi filter. See Application Note 116 for further details.

7Start-up into resistive load.

8Active low remote on/off is available. Standard product is active high.

Designate with the Suffix ‘-R’ e.g. SXE15-48S05-RJ.

9Operating ambient temperatures are specified at natural convection.

Higher operating temperatures are possible with increased airflow.

See Application Note 116 for further details.

10 SXE15-48S12J below 0.2 A loading. OVP is TVS and 17 V typical.

11 Signal line assumed < 3 m in length.

12 A 5% minimum load is required to maintain the output voltage regulation

over all operating conditions for the SXE15-48S12J.

13 This parameter is calculated at worst case line, load,

temperature and initial settings.

14 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.

TSE RoHS 5/6 (non Pb-free) compliant versions may be available on

special request, please contact your local sales representative for details.

15 NOTICE: Some models do not support all options. Please contact your

local Artesyn representative or use the on-line model number search tool at

http://www.artesyn.com/powergroup/products.htm to find a suitable

alternative.

CAUTION: Hazardous internal voltages and high temperatures.

Ensure that unit is not user accessible.

PROTECTION

Short circuit Continuous

Overvoltage Latching clamp

TELECOM SPECIFICATION

Central office interface A ETS300-132-2, input voltage

and current requirements

PIN CONNECTIONS

PIN NUMBER FEATURE

1 Vout +

2 Vout -

3 N/C

4 Trim

5 N/C

6 N/C

7 N/C

8 On/Off

9 N/C

10 N/C

11 Vin -

12 Vin +

SXE15 Series

Single output

DC-DC CONVERTERS 10.8-15 W High Efficiency DC-DC Converters 2

Please consult our website for the following items:  Application Note  Longform Data Sheet www.artesyn.com

International Safety Standard Approvals

UL/cUL 1950 3rd edition. File No. E135734

TÜV TÜV Rheinland. File No. 10401-3336-35841. Licence No. 40004290

OUTPUT INPUT OVP OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL

POWER VOLTAGE VOLTAGE CURRENT CURRENT (TYP.) LINE LOAD NUMBER (8,14,15)

(MAX.) (MIN.) (MAX.)

10.8 W 33-75 Vdc 2.3 Vdc 1.8 V 0 A 6 A 83% 0.3% 2.0% SXE15-48S1V8J

15 W 33-75 Vdc 3.2 Vdc 2.5 V 0 A 6 A 85% 0.3% 1.5% SXE15-48S2V5J

15 W 33-75 Vdc 4 Vdc 3.3 V 0 A 4.5 A 86% 0.1% 0.5% SXE15-48S3V3J

15 W 33-75 Vdc 6 Vdc 5 V 0 A 3 A 87% 0.1% 0.5% SXE15-48S05J

15 W 33-75 Vdc 15 Vdc (10) 12 V 0 A 1.25 A 85% 0.1% 0.5% SXE15-48S12J

File Name: sxe15s.pdf Rev (02): 08 Dec 2005