04/2003
RF
Power Control
Supply
IN
Active
Bias
Circuit
RF
/Suppl
y
OUT
ADR3410
50 Ω High Linearity 1 Watt Amplifier
ADVANCED PRODUCT INFORMATION - Rev 0.1
S27 Package
8 Pin SOIC with Heat Slug
Figure 1: Block Diagram
FEATURES
• 1 Watt Output Power
• 850 to 2200 MHz Operation
• Bias Control Input for Linearity Adjustment
• 12.5 dB Gain at 2160 MHz
• +43 dBm Output IP3 at 2160 MHz
• 4 dB Noise Figure at 880 MHz
• Single +5 V Supply
• -40 to +85 °C Operation
APPLICATIONS
• Driver Amplifiers for Multi-Carrier and Single
Carrier Power Amplifiers in W-CDMA and PCS
Base Stations
• ISM, Fixed Wireless and Satellite Systems
PRODUCT DESCRIPTION
The ADR3410 is a high performance, single-stage
InGaP HBT amplifier designed for use in wireless
infrastructure systems as a highly linear 1 Watt driver.
Packaged in a surface mount 8 pin SOIC, the die is
mounted to a heat slug, offering excellent thermal
dissipation and high reliability. The device may be
biased through an external inductor directly to a +5 V
supply, and uses an internal active bias circuit with a
current adjust input for linearity control.
2ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
1
2
3
4
8
7
6
5
RF
IN
RF
IN
V
PC
V
CC2
RF
OUT
/V
CC1
RF
OUT
/V
CC1
RF
OUT
/V
CC1
RF
OUT
/V
CC1
Active
Bias
Circuit
GND at slug
NIP EMAN NOITPIRCSED
2,1FR
NI
.stupnIFR
3V
CP
tiucricsaibevitcaehtottupniegatlovsihT.tupnilortnocrewoP
.tnerrucreifilpmaehtotpihsnoitalerraeniltceridasah
4V
2CC
.tiucricsaibevitcaotegatlovylppuS
,6,5
8,7 FR
TUO
V/
1CC
.egatlovylppusotdesaib,stuptuOFR
gulsDNGdnuorG
Figure 2: Pinout (X-ray Top View)
Table 1: Pin Description
ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
3
RETEMARAP NIM XAM TINU STNEMMOC
V(egatloVylppuS
,1CC
V
2CC
)06+CDV
V(egatloVlortnoCrewoP
CP
)05+CDV
rewoPtupnIFR-
-
51+
02+ mBd zHM088ta
zHM0612ta
erutarepmeTegarotS04-051+C°
erutarepmeTnoitcnuJ-002+C°
RETEMARAP NIM PYT XAM TINU
)f(ycneuqerFgnitarepO058- 0022 zHM
V(egatloVylppuS
,2CC,1CC
)6.3+0.5+6+CDV
V(egatloVlortnoCrewoP
CP
)0.2+- 5.4+CDV
erutarepmeTesaC04--58+C°
ELECTRICAL CHARACTERISTICS
Table 2: Absolute Minimum and Maximum Ratings
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not
implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely
affect reliability.
Table 3: Operating Ranges
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
4ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
RETEMARAP NIM PYT XAM TINU STNEMMOC
S(:niaG
12
)
zHM088
zHM0612
-
-
0.81
5.21
-
-Bd V
CP
V8.3+=
V
CP
V5.3+=
noisserpmoCBd1tuptuO
)Bd1P(
)2(
zHM088
zHM0612
-
-
92+
92+
-
-mBd V
CP
V8.3+=
V
CP
V5.3+=
tpecretnIredrO-drihTtuptuO
)3PIO(
zHM088
zHM0612
-
-
34+
34+
-
-mBd V
CP
V8.3+=
V
CP
V5.3+=
erugiFesioN
zHM088-4-BdV
CP
V8.3+=
oitaRrewoPlennahCtnecajdA
)3(
-57-- cBd
V,zHM088=f
CP
V8.3+=
(ecnatsiseRlamrehT θ
CJ
)-03-°W/C
tnerruCylppuSlatoT-
-
082
042
-
-Am
V,zHM088=f
CP
V8.3+=
V,zHM0612=f
CP
V5.3+=
tnerruClortnoCrewoP-06022Aµ
tA
V
CP
nip
All capacitors are muRata
GRM39 series.The 15 nH inductor
is a Coilcraft 0603CS series.
RFIN
VPC
VCC
39 pF 39 pF
12 pF 6 pF
0.1 uF
0.1 uF 100 pF 33 pF
15 nH
RFOUT
1
2
3
4
8
7
6
5
RFOUT/VCC1
RFOUT/VCC1
RFOUT/VCC1
RFOUT/VCC1
VPC
VCC2
RFIN
RFIN
ADR3410
Table 4: Electrical Specifications
(TA = +25 °C, VCC = +5 VDC, see Applications Circuits (1))
Notes:
(1) Performance as measured on ANADIGICS test fixture, using the appropriate Application Circuit
(see figures 3 & 4)
(2) OIP3 is measured with two tones at 1 MHz spacing, +13 dBm output power per tone.
(3) IS-95 modulation, +13 dBm channel power,
±
885 KHz offset.
Figure 3: 869 - 894 MHz Application Circuit (50 Ω Terminations)
ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
5
All capacitors are muRata
GRM39 series.The 8.2 nH inductor
is a Coilcraft 0603CS series.
RF
IN
V
PC
V
CC
15 pF 15 pF
3.3 pF 2 pF
0.1 uF
0.1 uF 100 pF 33 pF
8.2 nH
RF
OUT
1
2
3
4
8
7
6
5
RF
OUT
/V
CC1
RF
OUT
/V
CC1
RF
OUT
/V
CC1
RF
OUT
/V
CC1
V
PC
V
CC2
RF
IN
RF
IN
ADR3410
Figure 4: 2110 - 2170 MHz Application Circuit (50 Ω Terminations)
6ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
NOTES
ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
ADR3410
7
NOTES
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product
in any such application without written consent is prohibited.
IMPORTANT NOTICE
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice.
The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to
change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to
be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to
verify that the information they are using is current before placing orders.
ADVANCED PRODUCT INFORMATION - Rev 0.1
04/2003
8
ADR3410