© 2006 Tyco Electronics Corporation. All rights reserved Specification Control Drawing
Tyco Electronics Corporation
300 Constitution Drive
Menlo Park, CA 94025 USA
Title:
High Ratio Heat-shrinkable
Tubing
Tyco Electronics reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the product for their
application
Document No :
HRSR/HRHF/HRNF
Cage Code:
06090 Scale:
None Size:
A Rev. Date:
30-Jun-06 Rev.:
D Sheet:
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
HRSR/HRHF/HRNF
High Ratio Heat Shrinkable Tubing
Table 1: Dimensions
As Supplied Recovered
SIZE Inside Diameter*
Minimum (D) Inside Diameter
Maximum (d) Wall Thickness
Nominal (W)
-060 0.600 (15) 0.150 (4) 0.060 (1.5)
-125 1.250 (32) 0.240 (6) 0.060 (1.5)
-175 1.750 (44) 0.320 (8) 0.095 (2.4)
-200 2.000 (51) 0.380 (10) 0.105 (2.7)
-250 2.500 (64) 0.500 (13) 0.120 (3.0)
-300 3.000 (76) 0.750 (19) 0.120 (3.0)
-400 4.000 (102) 0.900 (23) 0.140 (3.6)
* When specification calls for coated tubing, reduce allowed minimum inside diameter by 0.10 inch
allow to for sealant thickness.
Properties: HRSR tubing is semi rigid and is fabricated from thermally stabilized, flame retarded,
cross linked modified polyolefin. The color shall be black, unless otherwise specified.
HRSR tubing meets the material requirements in RW 2013. Tests are performed on
uncoated tubing.
HRHF tubing is highly flexible and is fabricated from thermally stabilized, flame
retarded, cross linked modified polyolefin. The color shall be black, unless otherwise
specified. HRHF tubing meets the material requirements in RW 2013. Tests are
performed on uncoated tubing.
HRNF tubing is semi-rigid and is fabricated from thermally stabilized, cross linked
modified polyolefin. It is not flame retarded. The color shall be black, unless otherwise
specified. HRNF tubing meets the material requirements published in RW 2013. Tests
are performed on uncoated tubing.
Specification Control Drawing
Rev. Date:
30-Jun-06 Rev.:
D Document No.
HRSR/HRHF/HRNF Sheet:
2 of 2
© 2006 Tyco Electronics Corporation. All rights reserved
If this document is printed it becomes uncontrolled. Check for the latest revision.
ORDERING INFORMATION
HR HF – 125 FR - 10 / 97 / NM
Note:
Standard marking is white for black tubing. Standard marking is black for non flame retardant clear tubing.
Expanded and recovered dimensions will be printed in inches and millimeters. HRHF-XXX FR, HRSR-XXX
FR, or HRNF-XXX FR will be printed on material
“NM”
N
o mark (See Note)
“FR”
Flame retardant for SR & HF
SIZE
(See Table 1)
FAMILY
COATING
Adhesive = 97 standard with FR
Sealant = 226 standard with NF
LENGTH
in inches (10 standard)
MATERIAL
HF - flex
SR - semi rigid
N
F - non-flame
