33-01-G4C-ARTB - Everlight Electronic Co., Ltd.

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 1 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Benefits

. High Flux Output.

. Low Profile.

. Low Thermal Resistance.

. Low Power Consumption.

.The product itself will remain within RoHS compliant version.

. ESD-withstand voltage: up to 4KV.

Descriptions

This revolutionary package design allows the light designer to reduce the number of LEDs

required and provide a more uniform and unique illuminated appearance than with other LED

solutions. This is possible through the efficient optical package design and high-current capabilities.

The low profile package can be easily coupled with reflectors or lenses to efficiently distribute

light and provide the desired light appearance.

Applications

. Automotive Exterior Lighting

. Electronic Signs and Signals

. Channel Letter

. Special Lighting application

Device Selection Guide Chip

PART NO. Material Emitted Color Lens Color

33-01/G4C-ARTB InGaN Brilliant Green Water Clear

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 2 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Package Dimensions

Notes: 1.All dimensions are in millimeters

2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads

3.Tolerances unless dimensions ±0.25mm

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Units

Continuous Forward Current IF 30

mA

Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100

mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +100 ℃

Soldering Temperature(T=5 sec) Tsol 260 ± 5 ℃

Power Dissipation Pd 120

mW

Zener Reverse Current Iz 100 mA

Electrostatic Discharge ESD 4K V

LED Junction Temperature Tj 110 ℃

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 3 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Condition Unit

Total Flux Φv 4500 5650 9000 IF=30mA mlm

Viewing Angle 2θ1/2 ---- 90 ---- IF=30mA deg

Peak Wavelength λp ---- 518 ---- IF=30mA Nm

Dominant Wavelength λd 520 525 532 IF=30mA Nm

Forward Voltage VF 3.0 3.5 4.0 IF=30mA V

Reverse Current IR ---- ---- 10 VR=5V uA

Zener Reverse Voltage Vz 5.2 ---- ---- Iz=5mA V

Rank

33-01/G4C-ARTB (1) (2) (3)

(1) VF(V) (2) λd (3)Φv(mlm)

Bin. Min. Max. Bin. Min. Max. Bin. Min. Max.

1 3.00 3.20 3 520 524 R 4500 5650

2 3.20 3.40 4 524 528 S 5650 7150

3 3.40 3.60 5 528 532 T 7150 9000

4 3.60 3.80

5 3.80 4.00

*Measurement Uncertainty of Forward Voltage：±0.1V

*Measurement Uncertainty of Luminous Intensity: ±15%

*Measurement Uncertainty of Dominant Wavelength ±1.0nm

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 4 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Typical Electro-Optical Characteristics Curves

Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage

Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp.

Relative Intensity vs. Displacement Angle

450 475 500 525 550 575 600 625 650

WAVELENGTH (nm)

0.00

0.50

1.00

RELATIVE INTENSITY

3.00 3.40 3.802.80 3.20 3.60 4.00

FORWARD VOLTAGE (V)

0

10

20

30

FORWARD CURRENT (mA)

020406080100

AMBIENT TEMPERATURE

(

C

)

5

15

25

35

0

10

20

30

40

FORWAR D CURR EN T (mA)

0 5 10 15 20 25 30

FORWARD CURRENT (mA)

0.00

0.20

0.40

0.60

0.80

1.00

RELATIVE INTENSITY

-90-75-60-45-30-15 0

0.00

0.25

0.50

0.75

1.00 015 30

45

60

75

90

Relative Intensity (a.u.)

View ing angle (degree)

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 5 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Packing Quantity Specification

(1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box

(2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box

Label Form Specification

(1)Tube Label Form

(2)Box Label Form

PART NO: Everlgiht’s Production Number

QTY: Packing Quantity

LOT NO: Lot Number

CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux

CPN: Customer’s Production Number

P/N : Production Number

HUE: Reference

REF: Reference

MADE IN TAIWAN: Production Place

CPN:

P/N:

EVERLIGHT

33-01/G4C-ARTB

QTY：

MADE IN TAIWAN

CAT:

HUE:

REF:

LOT NO：

RoHS

PART NO: 33-01/G4C-ARTB QTY: 60

LOT NO: CAT:

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 6 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

Notes

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on

material change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for

using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any

damage resulting from use of the product which does not comply with the absolute maximum

ratings and the instructions included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT

corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s

consent.

4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises

to Vz, the zener diode “breakdown." If the voltage tries to rise above Vz current flows through

the zener branch to keep the voltage at exactly Vz.

5. When the LED is connected using serial circuit, if either piece of LED is no light up but current

can’t flow through causing others to light down. In new design, the LED is parallel with zener

diode. if either piece of LED is no light up but current can flow through causing others to light.

Technical Data Sheet

3mm POWER LED

33-01/G4C-ARTB

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev.1 Page: 7 of 7

Device number: DLE-303-012 Established date: 04-30-2007 Established by: Jim Lin

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm

from solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature

particularly when soldering.

Recommended soldering conditions:

Hand Soldering DIP Soldering

Temp. at tip of iron 400 Max.℃ (30W Max.) Preheat temp. 100 Max.℃ (60 sec Max.)

Soldering time 3 sec Max. Bath temp. 265 Max.

Distance 3mm Min.(From solder joint

to case)

Bath time. 5 sec Max.

Distance 3mm Min.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com