6-1462034-7 - TE CONNECTIVITY

01-2016, Rev. 0116

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

AXICOM

Signal Relays

n Slim line 15x7.3mm (.590x.287”)

n 2 form C bifurcated contacts (2 CO), switching current 2A

n High sensitivity for low power consumption, 80mW/140mW

n High dielectric characteristic, up to 2100Vrms between open

contact

n High surge capability (1.2/50μs and 10/700μs) meets Telcordia GR

1089 and FCC Part 68, up to 2900V between open contacts,

up to 6000V between coil and contacts

n High mechanical shock, up to 1500g survival

n Hermetically sealed (RT V)

Typical applications

Communications equipment, linecard application - analog, ISDN, xDSL,

PABX, voice over IP, ofﬁce and business equipment, measurement and

control equipment, consumer electronics, set top boxes, HiFi, medical

equipment

Approvals

UL 508 File No. E 111441

Technical data of approved types on request

Contact Data

Contact arrangement 2 form C (CO)

Max. switching voltage 220VDC, 250VAC

Rated current 2A

Limiting continuous current 2A

Switching power 60W, 62.5VA

Contact material PdRu, Au covered

Contact style bifurcated contacts

Min. recommended contact load 100µV/1µA

Initial contact resistance <70mΩ

Thermoelectric potential <10µV

Operate time typ. 3ms, max. 4ms

Release time

without diode in parallel typ. 1ms, max. 3ms

with diode in parallel typ. 3ms, max. 4ms

Set/reset time min. 20ms

Bounce time max. typ. 1ms, max. 5ms

Electrical endurance

at contact application 0

(≤ 30mV / ≤ 10mA) min. 2.5x106 operations

cable load open end min. 2.0x106 operations

resistive, 24V / 1.25A - 30W min. 5x105 operations

resistive, 30VDC / 2A - 60W min. 5x105 operations

resistive, 125VDC / 0.24A - 30W min. 5x105 operations

UL contact rating 30VDC, 2A, 60W

125VDC, 0.5A, 62,5W

120VDC, 1.25A, 150W

Mechanical endurance 100x106 operations

Coil Data

Magnetic system polarized, monostable, bistable

Coil voltage range 3 to 48VDC

Max. coil temperature 125°C.

Thermal resistance <165K/W

Coil versions, monostable

Coil Rated Operate Limiting Release Coil Rated coil

code voltage voltage voltage voltage resistance power

VDC VDC VDC VDC Ω±10% mW

Standard version, monostable, 1 coil

06 3 2.10 6.30 0.30 64 140

07 4 2.80 8.40 0.40 114 140

04 4.5 3.15 9.40 0.45 145 140

09 5 3.50 10.50 0.50 178 140

05 6 4.20 12.60 0.60 257 140

10 9 6.30 18.90 0.90 574 140

02 12 8.40 25.20 1.20 1028 140

12 24 16.80 42.20 2.40 2880 200

13 48 33.60 68.90 4.80 7680 300

High sensitive version, monostable, 1 coil

21 3 2.10 8.30 0.30 113 80

22 4.5 3.15 11.10 0.45 253 80

23 5 3.50 12.50 0.50 313 80

24 6 4.20 13.90 0.60 450 80

25 9 6.30 16.70 0.90 1013 80

26 12 8.40 33.40 1.20 1800 80

27 24 16.80 50.40 2.40 4114 140

28 48 36.00 70.00 4.80 8882 260

High dielectric version, monostable, 1 coil

91 3 2.25 6.3 0.30 45 200

92 4.5 3.15 9.45 0.45 101 200

96 12 8.40 25.2 1.20 720 200

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

FX2 Relay

DC current [A]

DC voltage [VDC]

Max. DC load breaking capacity

108-98003 Rev. G

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 5 of 11

Telecom-, Signal and RF Relays

FX2 Relay

AXICOM

Coil Operating Range

Unom = Nominal coil voltage

Umax. = Upper limit of the operative range of

the coil voltage (limiting voltage)

Uop. min. = Lower limit of the operative range of the

coil voltage (reliable operate voltage)

For latching relays Uset min. resp. Ureset min.

Urel. min. = Lower limit of the operative range of

the coil voltage (reliable release voltage)

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

-60 -50 -40-30 -20 -10010 20 30 40 50 60 70 80 90 100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Unom. nominal coil voltage

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

80 mW

140 mW

200 mW

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

-60-50 -40-30 -20-10 0102030405060708090100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

Unom. nominal coil voltage

260 mW

300 mW

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

3.6

3.8

4.2

4.4

-60-50 -40-30 -20-10 0102030405060708090100 110120 130140

Umax. - 5 % coil duty at 2 x 2 A

Umax. - 100 % coil duty at 0 A

Uset min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

100 mW Latching

Unom. nominal coil voltage

Umax. - 5 % coil duty at 0 A

Umax. - 5 % coil duty at 2 x 1 A

01-2016, Rev. 0116

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

AXICOM

Signal Relays

FX2 Relay (Continued)

Insulation standard* high dielectric*

Initial dielectric strength

between open contacts 1800Vrms 2100Vrms

between contact and coil 1800Vrms 4000Vrms

between adjacent contacts 1800Vrms 2100Vrms

Initial surge withstand voltage

between open contacts 2500V 2900V

between contact and coil 3500V 6000V

between adjacent contacts 2500V 2900V

Initial insulation resistance

between insulated elements >109Ω >109Ω

Capacitance

between open contacts max. 4pF

between contact and coil max. 2pF

between adjacent contacts max. 2pF

Cross talk at 100MHz/900MHz -34.0dB/-15.1dB

Insertion loss at 100MHz/900MHz 0.03dB/0.60dB

Voltage standing wave ratio (VSWR)

at 100MHz/900MHz 1.07/1.45

*this relay contains SF6 (Sulfur hexaﬂuoride, CAS number: 2551-62-4) for dielectric strength

enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applica-

tion as recommended per the applicable product speciﬁcation. It is clariﬁed that the usage

of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local

sales or ﬁeld engineer for further information and detailed material declaration.

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature -40°C to +85°C

Category of environmental protection

IEC 61810 RT V - immersion cleanable

Degree of protection, IEC 60529 IP 67, immersion cleanable

Vibration resistance (functional) 20g, 10 to 500Hz

Shock resistance (functional), half sinus 11ms 50g

Shock resistance (destructive), half sinus 0.5ms 1500g

Weight max. 2.5g

Resistance to soldering heat THT Peek value

IEC 60068-2-20 265°C/10s

Ultrasonic cleaning not recommended

Packaging/unit tube/50 pcs., box/1000 pcs.

Coil Data (continued)

Coil versions, bistable 1 coil

Coil Rated Set Limiting Reset Coil Rated coil

code voltage voltage voltage voltage resistance power

VDC VDC VDC VDC Ω±10% mW

Standard, bistable 1 coil

41 3 2.25 7.50 -2.25 90 100

42 4.5 3.38 11.20 -3.38 203 100

43 5 3.75 12.40 -3.75 250 100

44 6 4.50 14.90 -4.50 360 100

45 9 6.75 22.40 -6.75 810 100

46 12 9.00 29.80 -9.00 1440 100

47 24 18.00 48.70 -18.00 3840 150

High dielectric version, bistable 1 coil

62 4.5 3.15 11.20 -3.15 203 100

All ﬁgures are given for coil without pre-energization, at ambient temperature +23°C.

Other coil voltages on request.

Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are

continuously energized

Uop min lower limit of the operative range of the coil voltage (reliable operate voltage)

Urel min lower limit of the operative range of the coil voltage (reliable release voltage)

108-98003 Rev. G

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 5 of 11

Telecom-, Signal and RF Relays

FX2 Relay

AXICOM

Coil Operating Range

Unom = Nominal coil voltage

Umax. = Upper limit of the operative range of

the coil voltage (limiting voltage)

Uop. min. = Lower limit of the operative range of the

coil voltage (reliable operate voltage)

For latching relays Uset min. resp. Ureset min.

Urel. min. = Lower limit of the operative range of

the coil voltage (reliable release voltage)

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

-60 -50 -40-30 -20 -10010 20 30 40 50 60 70 80 90 100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Unom. nominal coil voltage

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

80 mW

140 mW

200 mW

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

-60-50 -40-30 -20-10 0102030405060708090100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

Unom. nominal coil voltage

260 mW

300 mW

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

3.6

3.8

4.2

4.4

-60-50 -40-30 -20-10 0102030405060708090100 110120 130140

Umax. - 5 % coil duty at 2 x 2 A

Umax. - 100 % coil duty at 0 A

Uset min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

100 mW Latching

Unom. nominal coil voltage

Umax. - 5 % coil duty at 0 A

Umax. - 5 % coil duty at 2 x 1 A

108-98003 Rev. G

All speciﬁcations subject to change. Consult Tyco Electronics for latest speciﬁcations. 5 of 11

Telecom-, Signal and RF Relays

FX2 Relay

AXICOM

Coil Operating Range

Unom = Nominal coil voltage

Umax. = Upper limit of the operative range of

the coil voltage (limiting voltage)

Uop. min. = Lower limit of the operative range of the

coil voltage (reliable operate voltage)

For latching relays Uset min. resp. Ureset min.

Urel. min. = Lower limit of the operative range of

the coil voltage (reliable release voltage)

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

-60 -50 -40-30 -20 -10010 20 30 40 50 60 70 80 90 100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Unom. nominal coil voltage

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

80 mW

140 mW

200 mW

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

1.8

2.0

2.2

2.4

2.6

-60-50 -40-30 -20-10 0102030405060708090100 110 120

Umax. at 0 A

Umax. at 2 x 2 A

Umax. at 2 x 1 A

Uop. min.

Urel. min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

Unom. nominal coil voltage

260 mW

300 mW

0.2

0.4

0.6

0.8

1.2

1.4

1.6

1.8

2.2

2.4

2.6

2.8

3.2

3.4

3.6

3.8

4.2

4.4

-60-50 -40-30 -20-10 0102030405060708090100 110120 130140

Umax. - 5 % coil duty at 2 x 2 A

Umax. - 100 % coil duty at 0 A

Uset min.

Ambient Temperature [°C]

Coil Voltage [U/Unom]

100 mW Latching

Unom. nominal coil voltage

Umax. - 5 % coil duty at 0 A

Umax. - 5 % coil duty at 2 x 1 A

PCB layout

TOP view on component side of PCB

Terminal assignment

TOP view on component side of PCB

Monostable Bistable, 1 coil

Contacts are shown in reset

condition.

Both coils can be used as

either set or reset coils.

Contact position might

change during transportation

and must be reset before

use.

01-2016, Rev. 0116

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

AXICOM

Signal Relays

FX2 Relay (Continued)

Dimensions

14.95±0.05 7.3±0.05

0.5

5.08±0.15

3.3±0.3 10.7±0.05

0.3±0.05

Packing

Product code structure Typical product code D32 04

Type

D32 Signal Relays FX2

2 form C, 2 CO

Coil

Coil code: please refer to coil versions table

Performance and coil type

0x,1x Standard version, monostable

2x High sensitive version, monostable

4x Standard version bistable

9x High dielectric version, monostable

6x High dielectric version, bistable

Product code Arrangement Perf. type Coil type Coil Part number

D3206 2 form C (2 CO) Standard Monostable 3VDC 1462034-6

D3207 4VDC 1462034-8

D3204 4.5VDC 1462034-2

D3209 5VDC 1462034-9

D3205 6VDC 1462034-5

D3210 9VDC 1-1462034-3

D3202 12VDC 1462034-1

D3212 24VDC 1-1462034-4

D3213 48VDC 1-1462034-5

D3221 2 form C (2 CO) High sensitive Monostable 3VDC 1-1462034-9

D3222 4.5VDC 2-1462034-0

D3223 5VDC 2-1462034-1

D3225 9VDC 2-1462034-3

D3226 12VDC 2-1462034-4

D3227 24VDC 2-1462034-5

D3228 48VDC 2-1462034-6

D3241 2 form C (2 CO) Standard Bistable 3VDC 2-1462034-8

D3242 4.5VDC 2-1462034-9

D3243 5VDC 3-1462034-0

D3246 12VDC 3-1462034-3

D3247 24VDC 3-1462034-4

D3291 2 form C (2 CO) High dielectric Monostable 3VDC 6-1462034-6

D3292 4.5VDC 6-1462034-8

D3296 12VDC 6-1462034-7

D3262 2 form C (2 CO) High dielectric Bistable 4.5VDC 6-1462034-3

This list represents the most common types and does not show all variants covered by this data sheet.

Other types on request