Signal Relays AXICOM FX2 Relay n n n n n n n Slim line 15x7.3mm (.590x.287") 2 form C bifurcated contacts (2 CO), switching current 2A High sensitivity for low power consumption, 80mW/140mW High dielectric characteristic, up to 2100Vrms between open contact High surge capability (1.2/50s and 10/700s) meets Telcordia GR 1089 and FCC Part 68, up to 2900V between open contacts, up to 6000V between coil and contacts High mechanical shock, up to 1500g survival Hermetically sealed (RT V) Typical applications Communications equipment, linecard application - analog, ISDN, xDSL, PABX, voice over IP, office and business equipment, measurement and control equipment, consumer electronics, set top boxes, HiFi, medical equipment Approvals UL 508 File No. E 111441 Technical data of approved types on request Contact Data Contact arrangement Max. switching voltage Rated current Limiting continuous current Switching power Contact material Contact style Min. recommended contact load Initial contact resistance Thermoelectric potential Operate time Release time without diode in parallel with diode in parallel Set/reset time min. Bounce time max. Electrical endurance at contact application 0 ( 30mV / 10mA) cable load open end resistive, 24V / 1.25A - 30W resistive, 30VDC / 2A - 60W resistive, 125VDC / 0.24A - 30W UL contact rating Mechanical endurance 2 form C (CO) 220VDC, 250VAC 2A 2A 60W, 62.5VA PdRu, Au covered bifurcated contacts 100V/1A <70m <10V typ. 3ms, max. 4ms typ. 1ms, max. 3ms typ. 3ms, max. 4ms 20ms typ. 1ms, max. 5ms min. 2.5x106 operations min. 2.0x106 operations min. 5x105 operations min. 5x105 operations min. 5x105 operations 30VDC, 2A, 60W 125VDC, 0.5A, 62,5W 120VDC, 1.25A, 150W 100x106 operations Z Coil Data Magnetic system polarized, monostable, bistable Coil voltage range 3 to 48VDC Max. coil temperature 125C. Thermal resistance <165K/W Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC 10% mW Standard version, monostable, 1 coil 06 3 2.10 6.30 0.30 64 140 07 4 2.80 8.40 0.40 114 140 04 4.5 3.15 9.40 0.45 145 140 09 5 3.50 10.50 0.50 178 140 05 6 4.20 12.60 0.60 257 140 10 9 6.30 18.90 0.90 574 140 02 12 8.40 25.20 1.20 1028 140 12 24 16.80 42.20 2.40 2880 200 13 48 33.60 68.90 4.80 7680 300 High sensitive version, monostable, 1 coil 21 3 2.10 8.30 0.30 113 80 22 4.5 3.15 11.10 0.45 253 80 23 5 3.50 12.50 0.50 313 80 24 6 4.20 13.90 0.60 450 80 25 9 6.30 16.70AXICOM 0.90 1013 80 Signal and RF Relays 26 12 8.40 33.40Telecom-, 1.20 1800 80 27 24 16.80 50.40 2.40 4114 140 Relay 8882 28 48 36.00 70.00FX2 4.80 260 High dielectric version, monostable, 1 coil 91 3 2.25 6.3 0.30 45 200 92 Coil Operating 4.5 3.15 9.45 0.45 101 200 Range 96 12 8.40 25.2 1.20 720 200 All figures are given for coil without pre-energization, at ambient temperature +23C. 80 mW 140 mW 200 mW Max. DC load breaking capacity 3.4 3.2 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 3 2.8 DC voltage [VDC] Coil Voltage [U/Unom] 2.6 2.4 Uop. min. = Urel. min. = 2.2 2 1.8 1.6 1.4 1.2 Unom. nominal coil voltage 1 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 0 -60 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [C] DC current [A] 01-2016, Rev. 0116 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Unom = Umax. = Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 2.6 2.4 2.2 2.0 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 260 mW 300 mW Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 1 Coil Voltage [U/Unom] FX2 Relay 2.4 2.2 2 Urel. min. = 1.8 For latching relays Uset min. resp. Ureset min. Lower limit of the operative range of the coil voltage (reliable release voltage) Coil Operating Range 1.6 1.4 1.2 1 Signal Relays Unom. nominal coil voltage 0.8 AXICOM Nominal coil voltage 0.4 Upper limit of the operative range of 3.4 0.2 the coil voltage (limiting voltage) 3.2 FX2 Relay (Continued) 0 Umax. at 0 A 3 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Uop. min. = Lower limit of the operative range of the Umax. at 2 x 1 A 2.8 Ambient Temperature [C] Umax. at 2 x 2 A coil voltage (reliable operate voltage) 2.6 For latching relays Uset min. resp. Ureset min. 2.4 2.2 Coil Data (continued) Insulation high dielectric* Urel. min. = Lower limit of the operative standard* range of 2 Initial dielectric strength the coil voltage (reliable release voltage) 1.8 260 mW between open contacts 1800Vrms 2100Vrms 1.6 300 mW 2.6 1.4 between contact and coil 1800Vrms 4000Vrms 2.4 1.2 between adjacent contacts 1800Vrms 2100Vrms U max. at 0 A 1 2.2 Unom. nominal coil voltage Initial surge withstand voltage Umax. at 2 x 1 A 0.8 2.0 Umax. at 2 x 2 A between open contacts 2500V 2900V 0.6 Uop. min. 1.8 0.4 between contact and coil 3500V 6000V U rel. min. 0.2 1.6 between adjacent contacts 2500V 2900V 0 1.4 Initial insulation resistance -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 1.2 between insulated elements >109 >109 Ambient Temperature [C] 1.0 Capacitance Unom. nominal coil voltage 0.8 between open contacts max. 4pF between contact and coil max. 2pF 0.6 Uop. min. between adjacent contacts max. 2pF 0.4 260 mW U rel. min. 300 mW 2.6 Cross talk at 100MHz/900MHz -34.0dB/-15.1dB 0.2 2.4 Insertion loss at 100MHz/900MHz 0.03dB/0.60dB 0.0 max. 90 at 0100A 110 120 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 U80 2.2 Voltage standing wave ratio (VSWR) U max. at 2 x 1 A Ambient Temperature [C] 2.0 at 100MHz/900MHz 1.07/1.45 Umax. at 2 x 2 A Coil versions, bistable 1 coil 1.8 *this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength Coil Set Limiting Reset Coil Rated coil 1.6 Rated enhancement, SF6 is hermetically sealed in relay without leaks to air during normal applicacode voltage voltage voltage resistance power 1.4voltage tion as recommended per the applicable product specification. It is clarified that the usage 4.4 Latching 1.24.2 VDC VDC VDC VDC100 mW 10% mW of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. Standard, bistable 1 coil 1.04 3.8 41 -2.25 90 100 U3 nom. nominal2.25 coil voltage 7.50 0.8 3.6 42 3.38 11.20 -3.38 203 100 3.4 4.5 0.6 3.2 43 5 3.75 12.40 -3.75Uop. min. 250 100 Other Data 0.43 44 6 4.50 14.90 -4.50Urel. min. 360 100 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 2.8 0.2 2.6 45 9 6.75 22.40 -6.75 810 100 refer to the Product Compliance Support Center at 0.0 2.4 -60 -50 -40 -30 -20 -10 0 1029.80 20 30 40 50 60 70 80 90 100 110 120 100 46 9.00 -9.00 1440 www.te.com/customersupport/rohssupportcenter 2.2 12 2 U max. - 100 % coil duty at 048.70 ATemperature Ambient [C] 47 24 18.00 -18.00 3840 150 Ambient temperature -40C to +85C 1.8 Umax.version, - 5 % coil duty at 2 x 2 A High dielectric bistable 1 coil Category of environmental protection 1.6 Umax. - 5 % coil3.15 duty at 2 x11.20 1A 1.4 4.5 62 -3.15 203 100 IEC 61810 RT V - immersion cleanable 1.2 Umax. - 5 % coil duty at 0 A All figures are given for coil without pre-energization, at ambient temperature +23C. Degree of protection, IEC 60529 IP 67, immersion cleanable 1 U nom. nominal coil voltage 0.8 Vibration resistance (functional) 20g, 10 to 500Hz 4.4 100 mW Latching 0.6 4.2 Shock resistance (functional), half sinus 11ms 50g 0.4 4 Uset min. Shock resistance (destructive), half sinus 0.5ms 1500g 0.2 3.8 0 3.6 Weight max. 2.5g 3.4 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] Resistance to soldering heat THT Peek value 3.2 3 IEC 60068-2-20 265C/10s 2.8 Ultrasonic cleaning not recommended 2.6 All specifications subject to change. Consult Tyco Electronics for latest specifications. Packaging/unit tube/505pcs., of 11box/1000 pcs. 2.4 Uop. min. Urel. min. 80 mW 140 mW 200 mW Unom = Umax. = Coil Voltage [U/Unom] Coil Voltage [U/Unom] Coil Voltage [U/Unom] Coil Voltage [U/Unom] Coil Voltage [U/Unom] 0.6 2.2 2 1.8 1.6 1.4 1.2 1 0.8 Umax. - 100 % coil duty at 0 A Umax. - 5 % coil duty at 2 x 2 A Umax. - 5 % coil duty at 2 x 1 A Umax. - 5 % coil duty at 0 A Unom. nominal coil voltage 0.6 0.4 Uset min. 0.2 0 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Ambient Temperature [C] 90 100 110 120 130 140 Other coil voltages on request. Umax upper limit of the operative range of the coil voltage voltage) whenspecifications. coils are All specifications subject to change. Consult Tyco (limiting Electronics for latest continuously energized Uop min lower limit of the operative range of the coil voltage (reliable operate voltage) Urel min lower limit of the operative range of the coil voltage (reliable release voltage) 5 of 11 Terminal assignment TOP view on component side of PCB Monostable PCB layout TOP view on component side of PCB Bistable, 1 coil Contacts are shown in reset condition. Both coils can be used as either set or reset coils. Contact position might change during transportation and must be reset before use. 2 01-2016, Rev. 0116 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Signal Relays AXICOM FX2 Relay (Continued) Dimensions Packing 7.30.05 3.30.3 0.30.05 10.70.05 14.950.05 0.5 5.080.15 Product code structure Type Coil Typical product code D32 04 D32 Signal Relays FX2 2 form C, 2 CO Coil code: please refer to coil versions table Performance and coil type 0x,1x Standard version, monostable 2x High sensitive version, monostable 4x Standard version bistable 9x High dielectric version, monostable 6x High dielectric version, bistable Product code Arrangement Perf. type Coil type D3206 2 form C (2 CO) Standard Monostable D3207 D3204 D3209 D3205 D3210 D3202 D3212 D3213 D3221 2 form C (2 CO) High sensitive Monostable D3222 D3223 D3225 D3226 D3227 D3228 D3241 2 form C (2 CO) Standard Bistable D3242 D3243 D3246 D3247 D3291 2 form C (2 CO) High dielectric Monostable D3292 D3296 D3262 2 form C (2 CO) High dielectric Bistable This list represents the most common types and does not show all variants covered by this data sheet. Other types on request 01-2016, Rev. 0116 www.te.com (c) 2015 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil 3VDC 4VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 3VDC 4.5VDC 5VDC 9VDC 12VDC 24VDC 48VDC 3VDC 4.5VDC 5VDC 12VDC 24VDC 3VDC 4.5VDC 12VDC 4.5VDC Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Part number 1462034-6 1462034-8 1462034-2 1462034-9 1462034-5 1-1462034-3 1462034-1 1-1462034-4 1-1462034-5 1-1462034-9 2-1462034-0 2-1462034-1 2-1462034-3 2-1462034-4 2-1462034-5 2-1462034-6 2-1462034-8 2-1462034-9 3-1462034-0 3-1462034-3 3-1462034-4 6-1462034-6 6-1462034-8 6-1462034-7 6-1462034-3 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3