ATS22D17S6U Product data sheet Characteristics soft starter-ATS22-control110V-power 208V(3hp)/230V(5hp)/460V(10hp)/575V(15hp) Product availability : Stock - Normally stocked in distribution facility Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Price* : 613.00 USD Main Range of product Altistart 22 Product or component type Soft starter Product destination Asynchronous motors Product specific application Pumps and fans Component name ATS22 Phase 3 phases [Us] rated supply voltage 208...600 V - 15...10 % Motor power hp 10 hp 460 V 15 hp 575 V 3 hp 208 V 5 hp 230 V Factory setting current 14 A Power dissipation in W 39 W for standard applications Utilisation category AC-53A Type of start Start with torque control (current limited to 3.5 In) IcL starter rating 17 A connection in the motor supply line for standard applications IP degree of protection IP20 Complementary Assembly style With heat sink Function available Internal bypass Supply voltage limits 177...660 V Supply frequency 50...60 Hz - 10...10 % Network frequency 45...66 Hz Device connection In the motor supply line [Uc] control circuit voltage 110 V -15...10 % 50/60 Hz Control circuit consumption 20 W Jul 13, 2019 1 Discrete output number 2 Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Minimum switching current 100 mA 12 V DC relay outputs Maximum switching current 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs Discrete input number 3 Discrete input type Logic LI1, LI2, LI3 5 mA 20 kOhm Discrete input voltage 110 V <= 121 V Discrete input logic Positive logic LI1, LI2, LI3 < 20 V and <= 15 mA > 79 V <= 2 mA Output current 0.4...1 Icl adjustable PTC probe input 750 Ohm Communication port protocol Modbus Connector type 1 RJ45 Communication data link Serial Physical interface RS485 multidrop Transmission rate 4800, 9600 or 19200 bps Installed device 31 Protection type Phase failure line Thermal protection starter Thermal protection motor Marking CE Type of cooling Forced convection Operating position Vertical +/- 10 degree Height 10.43 in (265 mm) Width 5.12 in (130 mm) Depth 6.65 in (169 mm) Product weight 15.43 lb(US) (7 kg) Environment Electromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 Standards EN/IEC 60947-4-2 Product certifications UL CCC C-Tick GOST CSA Vibration resistance 1.5 mm 2...13 Hz EN/IEC 60068-2-6 1 gn 13...200 Hz EN/IEC 60068-2-6 Shock resistance 15 gn 11 ms EN/IEC 60068-2-27 Noise level 45 dB Pollution degree Level 2 IEC 60664-1 Relative humidity 0...95 % without condensation or dripping water EN/IEC 60068-2-3 Ambient air temperature for operation 14...104 F (-10...40 C) without derating > 104...< 140 F (> 40...< 60 C) with current derating 2.2 % per C Ambient air temperature for storage -13...158 F (-25...70 C) Operating altitude <= 3280.84 ft (1000 m) without derating > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m 2 Ordering and shipping details Category 22576 - ATS22 ALTISTART Discount Schedule CP1G GTIN 00785901687238 Nbr. of units in pkg. 1 Package weight(Lbs) 12.76 Returnability Y Country of origin ID Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant - since 0939 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available California proposition 65 WARNING: This product can expose you to chemicals including: - - - - - - - Substance 1 Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. - - - - - - - Substance 2 Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. - - - - - - - More information For more information go to www.p65warnings.ca.gov Contractual warranty Warranty period 18 months 3 Product data sheet Dimensions Drawings Frame Size A Dimensions 4 ATS22D17S6U Product data sheet Mounting and Clearance ATS22D17S6U Precautions Standards The Altistart 22 soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1. For environment pollution degree 3, install the Altistart 22 soft starter inside a cabinet type 12 or IP54. DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH ATS22 soft starters are open devices and must be mounted in a suitable enclosure. Failure to follow these instructions will result in death or serious injury. Air Circulation Leave sufficient free space to help the air required for cooling purposes to circulate from the bottom to the top of the unit. Overheating To avoid the soft starter to overheat, respect the following recommendations: Mount the Altistart 22 Soft Starter within 10 of vertical. Do not locate the Altistart 22 Soft Starter near heat radiating elements. Electrical current through the Altistart 22 Soft Starter will result in heat losses that must be dissipated into the ambient air immediately surrounding the sof If several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from the bottom soft starter can ad 5 Product data sheet Mounting and Clearance ATS22D17S6U Mounting Connection Between the Fan and the Altistart 22 Soft Starter 1 2 Altistart 22 Soft Starter Fan 6 Product data sheet Mounting and Clearance ATS22D17S6U Wall mounted or Floor-standing Enclosure with IP 23 Degree of protection Introduction To help proper air circulation in the soft starter, grilles and forced ventilation can be installed. Ventilation Grilles Forced Ventilation Unit 7 ATS22D17S6U Product data sheet Connections and Schema Power Terminal Cage Style 1 Ground connection Power connections, minimum and maximum wiring capabilities, tightening torque Power supply and output to motor Size/gauge Tightening torque IEC cable UL cable min 2.5 mm 12 AWG max 16 mm 4 AWG min 3 N.m 26.25 lb.in max 3 N.m 26.25 lb.in 10 mm 0.4 in. Strip length Power connections, minimum required wiring section IEC cable UL cable mm (Cu 70C/158F) (1) AWG (Cu 75C/167F) (1) 2.5 10 8 Product data sheet Connections and Schema ATS22D17S6U 110 Vac control, Logic Inputs (LI) 110 Vac, 3-wire control 9 Product data sheet Connections and Schema ATS22D17S6U 110 Vac control, Logic Inputs (LI) 110 Vac, 2-wire control, freewheelstop 10 Product data sheet Performance Curves ATS22D17S6U Motor Thermal Protection - Cold Curves Curves A B C Class 10 Class 20 Class 30 Trip time for a Standard Application (Class 10) 3.5 ln 32 s Trip time for a Severe Application (Class 20) 3.5 ln 63 s 11 Trip time for a Severe Application (Class 30) 3.5 ln 95 s 12 Product data sheet Performance Curves ATS22D17S6U Motor Thermal Protection - Warm Curves Curves A B C Class 10 Class 20 Class 30 Trip time for a Standard Application (Class 10) 3.5 ln 16 s Trip time for a Severe Application (Class 20) 3.5 ln 32 s 13 Trip time for a Severe Application (Class 30) 3.5 ln 48 s 14