Actual size
Crystal oscillator
Specifications (characteristics)
Item
Symbol
Specifications
Conditions / Remarks
SG-211SDE
SG-211SCE
Output frequency range
f0
2.375 MHz to 60.000 MHz
Please contact us about available
frequencies.
Supply voltage
VCC
2.5 V Typ.
2.2 V to 2.7 V
3.3 V Typ.
2.7 V to 3.6 V
Storage temperature
T_stg
-40 C to +125 °C
Storage as single product.
Operating temperature
T_use
-40 C to +90 °C
Frequency tolerance *
f_tol
D: 20 × 10-6, E: 15 × 10-6
-20 C to +70 C
VCC 10%
included in reflow drift
H: 20 × 10-6, T: 15 × 10-6
-40 C to +85 C
a: ±15 × 10-6, b: ±20 × 10-6,d: ±25 × 10-6
-40 C to +90 C
Current consumption
ICC
2.5 mA Max.
3.5 mA Max.
No load condition,2.375 MHz≤f032 MHz
3.0 mA Max.
4.0 mA Max.
No load condition,32 MHz<f040 MHz
3.5 mA Max.
4.5 mA Max.
No load condition,40 MHz<f048 MHz
5.0 mA Max.
6.0 mA Max.
No load condition,48 MHz<f060 MHz
Stand-by current
I_std
5.0 µA Max.
ST
=GND
Symmetry
SYM
45 % to 55 %
50 % VCC level,L_CMOS 15 pF
Output voltage
VOH
90 % VCC Min.
IOH=-4 mA
VOL
10 % VCC Max.
IOL= 4 mA
Output load condition
(CMOS)
L_CMOS
15 pF Max.
Input voltage
VIH
80 % VCC Min.
ST
terminal
VIL
20 % VCC Max.
Rise time / Fall time
tr/ tf
4.5 ns Max.
20 % VCC to 80 % VCC level,
L_CMOS=15 pF
Start-up time
t_str
5 ms Max.
t=0 at 90 % VCC
Frequency aging
f_aging
This is included in frequency tolerance specification.
+25 °C, First year,
VCC= 1.8 V, 2.5 V, 3.3 V
* Please contact us for inquiries regarding available frequency tolerance.
External dimensions (Unit:mm)
Footprint (Recommended) (Unit:mm)
CRYSTAL OSCILLATOR
Low Profile / High stability SPXO
SG - 211 S*E
Frequency range : 2.375 MHz to 60.000 MHz
Supply voltage : 1.8 V / 2.5 V / 3.3 V
Current consumption : 1.2 mA Typ.
(SEE: 1.8 V No load condition 40 MHz)
Function : Standby(
ST
)
External dimensions : 2.5 × 2.0 × 0.7 mm
Product Number (please contact us)
X1G0036x1xxxx00
1.3
Resist
C
(ex. 0.01 µF)
#1
#2
#3
#4
1.7
1.1
0.9
Note.
ST pin = HIGH : Specified frequency output.
ST pin = LOW : Output is high impedance, oscillation stops.
0.9
#2
0.70.1
#3
0.8
0.6
#1
#4
0.7
Pin map
Pin
Connection
1
ST
2
GND
3
OUT
4
VCC
2.50.15
2.00.15
#1
#2
#4
#3
E933A
40.00T
To maintain stable operation, provide a 0.01uF to
0.1uF by-pass capacitor at a location as near as
possible to the power source terminal of the crystal
product (between Vcc - GND).