3M Molded Assembly 2 mm x 2 mm 2M Series S Available in multiple sizes S Sockets mate with standard 2 mm x 2 mm headers and plugs S Molded-in strain relief Date Modified:June 21, 2002 TS-1056-04 Sheet 1 of 2 Physical Connector Technical Specification: TS-0525 for 2 mm x 2 mm Molded-On Socket TS-0524 for 2 mm x 2 mm Molded-On PCB Cable Technical Specification: TS-0452 for 1mm Flat Ribbon Cable Electrical Voltage Rating: 30V Environmental Temperature Rating: --20C to +105C UL File No.: E86982 3 Interconnect Solutions http://www.3M.com/interconnects/ 343 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Molded Assembly 2 mm x 2 mm 2M Series A Length (Dim A) Tolerance B A D C Red Stripe Conductor #1 (near side) Min Max Tol 1.6 10.0 0.3 10.0 20.0 0.5 20.0 40.0 0.6 40.0 120.0 1.0 120.0 2.0 Right Connector Left Connector Note: A fan-out assembly, with multiple connectors on one end, requires a drawing submittal and review. Available Options Connector/Pos. 6 8 10 Socket X X X 12 16 20 22 24 26 30 X X X X X X 36 40 44 50 X X X X PCB X X X X X X X X X X X Cable X X X X X X X X X X X X X X Cable / Pos. 6 8 10 12 16 20 22 24 26 30 36 40 44 50 Note: If "Keying" is required, mark the circuit(s) to key. 1 Left Connector (Odd Row) 49 (Even Row) 50 Right Connector (Odd Row) 49 2 <Red Cable Stripe 1 2 (Even Row) 50 Ordering Information 2M XX XX - XXX - XXXX - XXX.X - XX - XX - XX - X Connector Types (Left and Right) Socket, Low Profile (.29) AA = no Centerbump, no Latching Ear AB = Centerbump, no Latching Ear AC = no Centerbump, with Latching Ear AD = Centerbump, with Latching Ear PCB, 2-Row BC = SnPb Plating, Straight Solder Tail Number of Cable Conductors Assembly Length Tip-to-Tip inches (Dim A in inches) Example: 001.6 = 1.6 Min Cable Product Series 28 AWG 3625 = Stranded, PVC Left Right Centerbump Orientation Options 0 = None 1 = Inside 2 = Outside Connector Orientation Options (Left and Right) AB = Up-Up AD = Up-Down CB = Down-Up CD = Down-Down Left Right Connector Feature Options 0 = No Keying Required 4 = Keying Required, specifiy position(s) TS-1056-03 Sheet 2 of 2 3 Interconnect Solutions http://www.3M.com/interconnects/ Marking 0 = No Marking 1 = Label - Date Code 2 = Inkstamp - Date Code 344 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/eisd (c) 3M 2003